XA6SLX75-2FGG484Q - Automotive Spartan-6 FPGA | AMD
MPN: XA6SLX75-2FGG484Q ✓ 啟用中XA6SLX75-2FGG484Q 概覽
A field-programmable gate array is a programmable digital logic device within the broader semiconductor and configurable-computing hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA combines programmable logic blocks, programmable interconnect, memory resources, and I/O blocks. After configuration, the XA6SLX75-2FGG484Q can implement parallel control logic, data acquisition paths, communication protocols, and signal-processing functions in one integrated device.
The device provides 74,637 logic cells arranged as 5,831 CLBs, supporting a maximum clock frequency of 667 MHz. Its CLB combinatorial delay reaches 0.26 ns, making it useful for timing-sensitive automotive interface and control functions. The 280-I/O complement supports connections to sensors, transceivers, memories, and external controllers, while the 1.2 V core supply helps separate core and I/O supply planning.
The XA6SLX75-2FGG484Q is associated with the XA Spartan-6 automotive family and AEC-Q100 qualification. Its 484-ball FBGA package uses a 1.00 mm terminal pitch and measures approximately 23 mm by 23 mm. These characteristics place the device in the BGA surface-mount package family and require careful PCB escape routing, via-in-pad or via-beneath-array decisions, and thermal-aware floorplanning.
Typical uses include automotive gateway modules, body and chassis controllers, sensor-fusion front ends, brake or steering assistance electronics, industrial vehicle networks, and motor-control systems. Its combination of logic capacity, I/O density, and automotive qualification supports designs that require deterministic parallel processing, flexible interface adaptation, and field-programmable logic.
PCB design should preserve high-speed signal integrity and provide a low-impedance power grid for the 1.2 V core. Decoupling capacitors should be distributed across the device rather than concentrated at one corner, while BGA escape traces should be matched as closely as practical. Configuration storage, programming access, and power-up behavior must also be designed against the manufacturer’s recommended reference circuit.
This product overview combines the device’s key FPGA, package, electrical, automotive, and architectural characteristics with drop-in replacement guidance and practical design considerations for engineers evaluating the XA6SLX75-2FGG484Q.
直接替換替代品,適用於 XA6SLX75-2FGG484Q — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XA6SLX75-2FGG484Q (相同外形與佔位) — 差異在於 Device Type, Mounting Type, Operating Temperature, Package, Package Type.
XC6SLX75-2FGG484C
✅ 直接替換聯絡詢價
查看資料表 →XC6SLX75-2FG484I
✅ 直接替換聯絡詢價
查看資料表 →XC6SLX75-2FGG484I
✅ 直接替換聯絡詢價
查看資料表 →XC6SLX75-2FG484C
✅ 直接替換聯絡詢價
查看資料表 →XA6SLX75-2FGG484I
✅ 直接替換聯絡詢價
查看資料表 →XA6SLX75-2FGG484Q 最大額定值與電氣特性
| FPGA Family | Spartan-6 LX XA |
| Logic Cells | 74,637 cells |
| Configurable Logic Blocks | 5,831 CLBs |
| 最大時脈頻率 | 667 MHz |
| CLB Maximum Combinatorial Delay | 0.26 ns |
| User I/O | 280 I/O |
| Process Technology | 45 nm CMOS |
| Core Supply Voltage | 1.2 V |
| 封裝 | 484-ball FBGA |
| Package Body Size | 23 mm x 23 mm |
| Ball Terminal Pitch | 1.00 mm |
| 安裝類型 | Surface Mount |
| Automotive Qualification | AEC-Q100 qualified |
| 工作溫度範圍 | -40°C to +125°C |
| Lead-Free Status | Lead-free |
XA6SLX75-2FGG484Q 23 mm x 23 mm 腳位配置指南
XA6SLX75-2FGG484Q(23 mm x 23 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XA6SLX75-2FGG484Q.
請參閱 資料表 以查看完整腳位配置。
典型應用
XA6SLX75-2FGG484Q 適用於 6 應用s: Automotive Gateway and Network Control, Vehicle Sensor Acquisition, Body and Chassis Control, Industrial Vehicle Control, ADAS Sensor Interface, Programmable Industrial Automation.
Automotive Gateway and Network Control
The XA6SLX75-2FGG484Q fits an automotive gateway because it combines 74,637 logic cells with 280 I/O in an AEC-Q100-qualified 484-ball FBGA device. Parallel interfaces can connect CAN, LIN, Ethernet, sensor, and body-control domains while programmable logic handles protocol conversion and message filtering. Its 667 MHz maximum clock supports time-multiplexed interface logic without requiring a separate processor for every deterministic routing function. The main design consideration is balancing the 1.2 V core rail and numerous I/O supplies while preserving signal integrity across the BGA escape field.
推薦
Vehicle Sensor Acquisition
The XA6SLX75-2FGG484Q can collect and preprocess signals from pressure, temperature, position, radar, and inertial sensors in a centralized vehicle electronics module. Its 280 I/O provide enough parallel connectivity for multiplexing, conditioning, and filtering, while 5,831 CLBs allow substantial control and datapath logic to be implemented in one FPGA. The 0.26 ns maximum CLB combinatorial delay is useful for demanding logic stages, although system timing still depends on routing and external components. Designers should reserve clean clocking, isolate noisy sensor interfaces, and verify ground partitioning beneath the 484-ball package.
推薦
Body and Chassis Control
The XA6SLX75-2FGG484Q is suitable for body and chassis controller logic where multiple switch inputs, actuator outputs, diagnostic signals, and communication channels must be coordinated. Its 74,637 logic cells provide capacity for debouncing, state machines, fault monitoring, and communication protocol logic, while the 280 I/O simplify board-level connectivity. The automotive XA family and AEC-Q100 association support use in qualified vehicle programs when all applicable operating conditions are met. Firmware should include diagnostic coverage and safe-state behavior rather than relying solely on hardware redundancy.
推薦
Industrial Vehicle Control
The XA6SLX75-2FGG484Q can support industrial vehicle controllers for construction, mining, agriculture, and material-handling equipment exposed to temperature variation, vibration, and electrical transients. Its 74,637 logic cells and 280 I/O permit integration of motor sequencing, sensor fusion front ends, operator interfaces, and diagnostic networks in a single programmable platform. The 667 MHz maximum device clock provides ample logic bandwidth, but motor-control outputs still require suitable external drivers and isolation. PCB design should provide robust power distribution, protection networks, and thermal paths suitable for the 484-ball BGA.
推薦
ADAS Sensor Interface
The XA6SLX75-2FGG484Q can implement programmable front-end logic for radar, camera, ultrasonic, or inertial sensor interfaces where multiple buses and deterministic data paths must converge on a common control platform. The 280 I/O allow parallel sensor data, synchronization, and management signals to be distributed across the device, while 74,637 logic cells support framing, filtering, calibration, and fault detection. The BGA package demands careful escape routing and reference-controlled clock distribution. Engineers should separate sensitive and noisy supplies, keep high-speed return paths continuous, and validate timing with the actual PCB implementation.
推薦
Programmable Industrial Automation
The XA6SLX75-2FGG484Q can serve as the programmable control core in industrial automation equipment requiring numerous fieldbus interfaces, real-time sequencing, and adaptable signal routing. Its 5,831 CLBs and 280 I/O are well suited to combining machine control, communication bridges, diagnostics, and safety monitoring in one FPGA. Although the XA family is associated with automotive qualification, industrial designs must verify temperature grade, electrical limits, certification requirements, and expected service life independently. Configuration retention and reliable power-up sequencing are especially important where the controller must resume deterministic operation after power restoration.
推薦
推薦產品摘要
工程參考資料,適用於 XA6SLX75-2FGG484Q — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC6SLX75-2FGG484C | XC6SLX75-2FG484I | XC6SLX75-2FGG484I | XC6SLX75-2FG484C | XA6SLX75-2FGG484I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 484-ball FBGA | 484-ball FBGA - same | 484-ball FBGA - same | 484-ball FBGA - same | 484-ball FBGA - same | 484-ball FBGA - same |
| FPGA Family | Spartan-6 LX XA | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX XA |
| Logic Cells | 74,637 cells | 74,637 cells | 74,637 cells | 74,637 cells | 74,637 cells | 74,637 cells |
| Configurable Logic Blocks | 5,831 CLBs | 5,831 CLBs | 5,831 CLBs | 5,831 CLBs | 5,831 CLBs | 5,831 CLBs |
| Maximum Clock Frequency | 667 MHz | 667 MHz | 667 MHz | 667 MHz | 667 MHz | 667 MHz |
| Process Technology | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS |
| User I/O | 280 I/O | 280 I/O | 280 I/O | 280 I/O | 280 I/O | 280 I/O |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
主要差異化特點
- Maintains the full 74,637-cell Spartan-6 LX resource set (對比XC6SLX75-2FGG484C)
- Provides the same 280-I/O interface in a 484-ball FBGA (對比XA6SLX75T-2FGG484Q)
- Retains the -2 speed grade and 667 MHz maximum clock (對比XA6SLX75-3FGG484Q)
- Uses a 1.00 mm-pitch 23 mm by 23 mm automotive BGA platform (對比XC6SLX75-2FG484I)
設計說明
Implement the 484-ball FBGA land pattern from the official package drawing and preserve all ball locations, including power and ground balls. Avoid improvised via patterns because the 1.00 mm pitch leaves limited escape-routing space. Use the manufacturer reference stack-up and routing guidance, maintain a continuous ground reference beneath signal escapes, and apply appropriate fabrication and assembly rules for the selected PCB technology.
Separate the 1.2 V core supply from I/O supply requirements wherever the design permits. Place the required high-frequency ceramic capacitors directly across the associated power and ground balls, distribute them around the BGA rather than concentrating them at one edge, and provide low-impedance planes or polygons for both core and I/O currents. Validate voltage sequencing, startup behavior, and supply droop with realistic switching activity.
Thermal performance depends on the complete PCB stack-up, copper planes, airflow, and adjacent heat sources, not the package alone. Preserve large uninterrupted copper regions beneath the FPGA, avoid thermal discontinuities beneath the device, and use thermal vias where the manufacturer land pattern calls for them. Perform junction-temperature analysis at the maximum ambient temperature and worst-case logic activity before approving an automotive operating profile.
Route clocks and high-speed interfaces through continuous reference planes and avoid crossings over plane splits. Apply source-series termination, length matching, and impedance control according to the selected interface standard. Keep configuration and programming access away from sensitive clock nets where practical. Because the device has 280 I/O, pin assignment should reduce simultaneous high-speed switching on power and ground paths.
Do not treat the XA6SLX75T as a drop-in substitute: that family is Spartan-6 LXT and the available comparison identifies 268 I/O rather than the target device's 280 I/O. Likewise, do not substitute the -3 speed grade into a -2 design because its maximum clock differs by 50%. Confirm the complete ordering code, architecture, I/O count, speed grade, package, and qualification before changing a released BOM.
合規資訊
The device is identified as an automotive XA Spartan-6 FPGA with AEC-Q100 qualification. A comparison listing identifies the package as lead-free. RoHS, REACH, halogen-free, and conflict-minerals status are not explicitly established.