XA7A100T-1CSG324I - 101,440-Cell FPGA | AMD | Industrial Control
MPN: XA7A100T-1CSG324I ✓ 啟用中XA7A100T-1CSG324I 概覽
An FPGA is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. Within the product hierarchy, the XA7A100T-1CSG324I is a field-programmable gate array, then an Artix-7 FPGA, and finally a programmable logic device used to implement parallel processing, control, signal processing, and hardware acceleration. Unlike fixed-function logic ICs, its configuration supports design changes without replacing the physical component.
The principal resource figures are 101,440 logic cells, 4,976,640 RAM bits, 7,925 CLBs, and 210 I/O. This resource balance is suitable for protocol bridging, embedded control, industrial networking, test equipment, and moderate parallel-data pipelines. The CSG324 package places 324 solder balls on a compact 15 mm footprint, reducing board area while requiring careful escape routing, via-in-pad considerations, and assembly planning.
The Artix-7 architecture combines programmable logic with dedicated memory resources and programmable I/O. Its 6 ns pin-to-pin logic delay and 208 MHz maximum published system frequency provide useful timing guidance for synchronous control and communication designs. Actual attainable frequency depends on the selected clocking resources, logic depth, I/O standard, routing congestion, speed grade, and timing constraints.
Typical applications include industrial Ethernet gateways, programmable logic controllers, data-acquisition front ends, motor-control systems, and compact embedded instruments. The 210 available I/O support external memory, communications transceivers, sensors, and actuators, while the 4,976,640 RAM bits provide local storage for buffering, packet handling, and time-domain correlation.
Design the PCB around the manufacturer's CSPBGA land pattern, power planes, decoupling network, configuration interface, and ball-assignment files. Treat the published 208 MHz frequency as a device-level reference rather than a guaranteed operating frequency, and complete timing analysis with the actual design and selected package files. Validate assembly process, via geometry, thermal performance, and programmed configuration before production release.
This page combines device resource data, same-footprint Artix-7 alternatives, package considerations, and selection guidance for engineers evaluating the XA7A100T-1CSG324I. It also distinguishes exact drop-in options from alternatives whose package, temperature grade, speed grade, or qualification requirements must be checked before substitution.
直接替換替代品,適用於 XA7A100T-1CSG324I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XA7A100T-1CSG324I (相同外形與佔位) — 差異在於 Package, Block RAM, Logic Cells, Mounting Type, Configurable Logic Blocks.
XA7A100T-1CSG324Q
✅ 直接替換📋 參考替代品(不在目錄中)
XA7A100T-2CSG324I
✅ 直接替換聯絡詢價
查看資料表 →XC7A100T-1CSG324I
✅ 直接替換✓ 有庫存
$59.9 / 單位
查看資料表 →XC7A100T-1CSG324C
✅ 直接替換✓ 有庫存
$59.9 / 單位
查看資料表 →XC7A100T-L1CSG324I
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XA7A100T-1CSG324I 最大額定值與電氣特性
| FPGA Family | Artix-7 XA |
| Logic Cells | 101,440 cells |
| Configurable Logic Blocks | 7,925 CLBs |
| Block RAM | 4,976,640 bits |
| User I/O | 210 I/O |
| 封裝 | 324-LFBGA, CSPBGA |
| Terminal Count | 324 balls |
| Package Dimensions | 15 mm × 15 mm |
| 安裝類型 | Surface mount |
| Process Technology | 28 nm |
| Core Supply Voltage | 1 V |
| Pin-to-Pin Logic Delay | 6 ns |
| Maximum Published System Frequency | 208 MHz |
| Terminal Form | Ball |
| Package Shape | Square |
XA7A100T-1CSG324I square 腳位配置指南
XA7A100T-1CSG324I(square 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XA7A100T-1CSG324I.
請參閱 資料表 以查看完整腳位配置。
典型應用
XA7A100T-1CSG324I 適用於 6 應用s: Industrial Ethernet Control Gateway, Programmable Logic Controller, Data-Acquisition Front End, Motor Control and Condition Monitoring, Test and Measurement Instrumentation, Embedded Communications Processor.
Industrial Ethernet Control Gateway
The XA7A100T-1CSG324I fits industrial Ethernet gateways that combine frame handling, protocol conversion, control logic, and external interfaces. Its 101,440 logic cells and 7,925 CLBs allow multiple packet-processing paths to run concurrently, while 4,976,640 RAM bits support buffering, counters, and state tables. The 210 I/O can connect PHYs, transceivers, status indicators, and configuration storage. In a typical design, parallel logic handles framing and filtering while dedicated memory resources retain packet metadata. The 324-ball CSPBGA saves board area, although signal escape routing and layer transitions must be planned carefully. Verify industrial temperature and qualification requirements for the selected ordering code before deployment.
推薦
Programmable Logic Controller
The XA7A100T-1CSG324I is appropriate for a programmable logic controller that must execute multiple real-time control tasks without relying on a separate processor. The 7,925 CLBs can host motion sequencing, interlocks, timers, and communication state machines, while the 210 I/O provide access to sensors, actuators, encoders, and industrial transceivers. Its 4,976,640 RAM bits are useful for history buffers, diagnostic records, and sampled data. Implement time-critical functions in parallel hardware and use the FPGA fabric for deterministic sequencing. The compact 15 mm CSPBGA package reduces controller footprint, but ball escape routing, power delivery, and thermal verification require early PCB planning.
推薦
Data-Acquisition Front End
The XA7A100T-1CSG324I can implement a parallel data-acquisition front end that aggregates multiple converter channels before transferring results to a host or communications engine. Its 101,440 logic cells support trigger logic, channel interleaving, filtering, digital correction, and configurable data packing, while 4,976,640 RAM bits provide acquisition buffers. The 210 I/O can connect ADCs, digital sensors, clock sources, and status signals. Parallel pipelines reduce the processing burden placed on a downstream microcontroller and provide deterministic behavior during bursts. Use registered interfaces and controlled clock domains to prevent timing violations, and confirm converter interface timing against the selected speed grade before implementation.
推薦
Motor Control and Condition Monitoring
The XA7A100T-1CSG324I fits motor-control and condition-monitoring systems that combine fast sampling with supervisory logic. Dedicated parallel resources can execute pulse-width modulation generation, encoder decoding, fault capture, and vibration or current analysis without forcing all tasks through a processor. The 4,976,640 RAM bits support sample histories and diagnostic traces, and 210 I/O connect power-stage feedback, position sensors, and communications. Because safety-related behavior depends on timing margins, constrain clocking and I/O paths for the selected device grade. The compact CSPBGA also requires a disciplined escape-routing strategy to preserve signal integrity from the FPGA to external sensors and actuators.
推薦
Test and Measurement Instrumentation
The XA7A100T-1CSG324I is suitable for programmable test and measurement instruments requiring parallel stimulus generation, pattern processing, and acquisition control. Its 7,925 CLBs can run multiple pattern engines or DSP-oriented pipelines, while 4,976,640 RAM bits provide local sample and trace storage. The 210 I/O allow direct connection to test probes, relays, ADC front ends, and communication interfaces. Implement clocking, triggers, and data capture in deterministic hardware, then use a higher-level processor or host for reporting. The 324-ball package supports a compact instrument architecture, although high-speed routing must include controlled-impedance design, return paths, and assembly-aware via strategy.
推薦
Embedded Communications Processor
The XA7A100T-1CSG324I can implement a dedicated communications processor for interfaces requiring parallel classification, filtering, encryption, or protocol conversion. The 101,440 logic cells support concurrent datapaths, and 4,976,640 RAM bits accommodate packet queues, lookup tables, and buffer descriptors. Its 210 I/O provide direct access to parallel PHY interfaces, memory devices, and control signals, allowing traffic processing to proceed without depending on a separate processor for every operation. Place boundary-sensitive logic close to the I/O, use registered clock-domain crossings, and reserve PCB resources for memory expansion. Validate throughput and timing with the actual network rates and selected FPGA speed grade.
推薦
推薦產品摘要
工程參考資料,適用於 XA7A100T-1CSG324I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XA7A100T-1CSG324Q | XA7A100T-2CSG324I | XC7A100T-1CSG324I | XC7A100T-1CSG324C | XC7A100T-L1CSG324I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 324-LFBGA, CSPBGA | 324-LFBGA, CSPBGA | 324-LFBGA, CSPBGA | 324-LFBGA, CSPBGA | 324-LFBGA, CSPBGA | 324-LFBGA, CSPBGA |
| Logic Cells | 101,440 cells | 101,440 cells | 101,440 cells | 101,440 cells | 101,440 cells | 101,440 cells |
| Block RAM | 4,976,640 bits | 4,976,640 bits | 4,976,640 bits | 4,976,640 bits | 4,976,640 bits | 4,976,640 bits |
| User I/O | 210 I/O | 210 I/O | 210 I/O | 210 I/O | 210 I/O | 210 I/O |
| Configurable Logic Blocks | 7,925 CLBs | 7,925 CLBs | 7,925 CLBs | 7,925 CLBs | 7,925 CLBs | 7,925 CLBs |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Core Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
| Special Ordering Designation | XA7A100T-1CSG324I | XA7A100T-1CSG324Q | XA7A100T-2CSG324I | XC7A100T-1CSG324I | XC7A100T-1CSG324C | XC7A100T-L1CSG324I |
主要差異化特點
- Matches the 324-ball CSG324 resource profile while retaining the XA ordering designation (對比XC7A100T-1CSG324C)
- Provides a pin-compatible XA-family alternative without changing the PCB footprint (對比XA7A100T-1CSG324Q)
- Offers a same-package alternate speed designation for timing-dependent designs (對比XA7A100T-2CSG324I)
設計說明
Start the layout from AMD's CSG324 package files rather than a generic 324-ball BGA template. Assign all power, ground, configuration, clock, and user-I/O balls from the exact device package, then reserve uninterrupted escape paths from the BGA array. Pay particular attention to rows between I/O balls and to differential pairs, because any layer transition can disrupt return paths and degrade signal integrity.
Use the manufacturer's recommended power rails and decoupling topology for the Artix-7 device. Place the smallest required bypass capacitors immediately adjacent to the relevant supply balls and provide low-impedance distribution for the 1 V core and I/O supplies. Validate voltage sequencing, transient response, and simultaneous switching demand in power-integrity analysis rather than treating the nominal supply values as sufficient proof of rail stability.
Thermal performance depends on the assembled board, copper distribution, airflow, and adjacent heat sources. Route power and ground connections with generous copper and evaluate the complete CSG324 land pattern under worst-case FPGA utilization. Check junction-temperature limits against the selected grade and enclosure temperature, and avoid placing temperature-sensitive analog or communications sections directly beneath the highest-power area.
Do not treat the published 208 MHz figure as a guaranteed clock rate for every design. Build timing constraints around the actual clocking resources, I/O standards, logic depth, and routing congestion, then examine both setup and hold timing. When comparing the XA7A100T-1CSG324I with an XC7A100T ordering code, separately verify speed grade, temperature grade, qualification, configuration compatibility, and lifecycle constraints.
合規資訊
The XA family designation and industrial orientation should not be treated as proof of AEC-Q100 qualification. Compliance attributes require confirmation from AMD or the applicable product documentation.