XC3S1000-4FT256I - 1M Gate Spartan-3 FPGA | AMD
MPN: XC3S1000-4FT256I ✗ 停產XC3S1000-4FT256I 概覽
A field-programmable gate array, or FPGA, is a programmable digital logic device within the broader semiconductor and configurable-logic hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA allows designers to implement parallel processing, control, interface, and signal-processing logic in a reconfigurable device. The Spartan-3 architecture combines logic cells, dedicated block RAM, digital signal processing resources, and programmable I/O within one integrated circuit.
The XC3S1000-4FT256I provides 432 kbit of embedded memory according to the manufacturer family documentation. Its -4 speed designation identifies the device performance class, while the I suffix identifies the industrial-temperature ordering option. A 256-ball FTBGA package supports dense PCB routing and is suitable for compact control, communications, instrumentation, and embedded-processing systems where many external signals must terminate on a programmable device.
Within the Spartan-3 family, this device provides 173 user I/Os and up to 630 MHz device performance. The programmable architecture permits design changes without changing the PCB, while dedicated block RAM supports buffering, packet storage, and moderate-width data paths. The 1.2 V core operating point reduces core power relative to earlier-generation programmable devices, although total board power still depends on I/O activity, configuration resources, and the selected design.
Typical uses include industrial automation, embedded control, data acquisition, communications interfaces, and low-cost digital signal processing. The combination of 17,280 logic elements and 173 I/Os allows one device to consolidate several discrete logic functions. Designs requiring more memory, higher I/O density, or a newer migration path should be evaluated against larger Spartan-3 variants or later AMD FPGA families before PCB release.
The FT256 package requires careful power, ground, and signal-integrity planning. Follow the Spartan-3 family datasheet for decoupling, configuration, clocking, and package-ball guidance, and validate every board with the completed design rather than relying only on theoretical resource counts. Confirm that the assembled board, manufacturing process, and operating environment remain compatible with the industrial-grade ordering option.
直接替換替代品,適用於 XC3S1000-4FT256I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC3S1000-4FT256I (相同外形與佔位) — 差異在於 Core Supply Voltage, Device Type, Logic Cells, Mounting Type, Temperature Grade.
XC3S1000-4FTG256I
✅ 直接替換📋 參考替代品(不在目錄中)
XC3S1000-4FTG256C
✅ 直接替換📋 參考替代品(不在目錄中)
XC3S1000-4FT256C
✅ 直接替換聯絡詢價
查看資料表 →XC3S1000-5FTG256C
✅ 直接替換📋 參考替代品(不在目錄中)
XC3S1000-4FT256I0750
✅ 直接替換📋 參考替代品(不在目錄中)
XC3S1000-4FT256I 最大額定值與電氣特性
| Device Type | Spartan-3 Field-Programmable Gate Array (FPGA) |
| System Gates | 1,000,000 gates |
| Logic Cells | 17,280 logic cells |
| Logic Array Blocks | 1,920 CLBs |
| Embedded Memory | 432 kbit |
| User I/O | 173 I/Os |
| Performance Rating | 630 MHz |
| Core Supply Voltage | 1.2 V nominal |
| Supply Voltage Range | 1.14 V to 1.26 V |
| Speed Grade | -4 |
| Temperature Grade | Industrial grade |
| 封裝 | 256-ball FTBGA (FT256) |
| 安裝類型 | Surface mount |
| Technology | CMOS |
| Programmable Logic Type | FPGA |
| RoHS 狀態 | Compliant |
XC3S1000-4FT256I 256-ball ftbga (ft256) 腳位配置指南
XC3S1000-4FT256I(256-ball ftbga (ft256) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC3S1000-4FT256I.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC3S1000-4FT256I 適用於 6 應用s: Industrial Automation Controller, Data Acquisition System, Communications Interface, Embedded Signal Processing, Video Timing Controller, Programmable Logic Platform.
Industrial Automation Controller
The XC3S1000-4FT256I fits industrial automation controllers that coordinate sensors, actuators, interlocks, and communications while requiring an industrial-temperature qualification. Its 1,920 CLBs and 17,280 total logic cells can implement motion-control sequencing, state machines, counters, and communication protocol engines in parallel. The 173 user I/Os provide substantial board-level connectivity without requiring multiple programmable logic devices. The device is normally placed between field-interface electronics and the control processor, with external transceivers handling voltage translation, isolation, and surge protection. Validate timing against the -4 speed class and verify power sequencing, configuration startup, and industrial environmental requirements on the completed assembly.
推薦
Data Acquisition System
The XC3S1000-4FT256I is suitable for parallel data-acquisition front ends that must combine sample control, channel multiplexing, trigger logic, and local data preparation. Seventeen thousand two hundred eighty logic cells allow multiple acquisition channels to be handled concurrently, while 432 kbit of embedded memory can buffer intermediate results and facilitate burst transfer. Its 173 user I/Os are useful for connecting ADC control signals, data buses, status indicators, and interface logic. Place the FPGA close to the converter and memory interfaces, constrain timing-critical paths, and use the AMD DS099-1 guidance for clocking and decoupling. Final throughput and timing closure must be verified against the actual converter latency and memory bandwidth.
推薦
Communications Interface
The XC3S1000-4FT256I can implement deterministic communication bridges, packetizers, FIFO controllers, and protocol converters when an FPGA provides more parallelism than a microcontroller. Its 173 I/Os support byte-wide data buses, control signals, clocks, and status interrupts, while the 432 kbit embedded memory can serve as transmit or receive buffering. The device is especially useful for bridging legacy parallel interfaces to serial links or splitting traffic among multiple endpoints. Engineers should define clock domains explicitly, use supported clocking resources, constrain asynchronous crossings, and verify setup and hold timing for the -4 speed grade. External PHY magnetics and line drivers remain necessary for physical-layer connections.
推薦
Embedded Signal Processing
The XC3S1000-4FT256I supports parallel filtering, correlation, counting, waveform generation, and fixed-point signal-processing functions where dedicated programmable logic provides deterministic throughput. The 630 MHz device performance rating, 1,920 CLBs, and dedicated embedded-memory capacity allow several processing paths to operate simultaneously without relying on sequential software execution. The 173 I/Os can connect sample buses, coefficients, status flags, and external memories. Use synchronous clocking and pipeline arithmetic where required, then review the post-route timing report because advertised device performance does not guarantee that every architecture reaches that rate. Component selection must also account for clock jitter, I/O standards, memory interfaces, and power consumption at the chosen activity level.
推薦
Video Timing Controller
The XC3S1000-4FT256I can implement timing generation, pixel and line counters, blanking control, synchronization, and display data-path coordination in compact video systems. Its 173 I/Os are ample for parallel pixel buses and timing controls, while the programmable logic permits support for multiple raster modes without changing the PCB. The internal memory can hold lookup data or line buffers for simple timing and overlay functions. Designers should use dedicated clock resources, establish deterministic relationships among pixel clock, sync, and blanking signals, and constrain output timing to the selected I/O standard. The device does not include a video engine, so external memory bandwidth and interface timing must be evaluated in the complete design.
推薦
Programmable Logic Platform
The XC3S1000-4FT256I is useful as a general programmable-logic platform for prototypes, custom peripheral controllers, legacy interface adapters, and low-volume embedded systems. Seventeen thousand two hundred eighty logic cells and 432 kbit of embedded RAM provide enough parallelism to consolidate several fixed-function ICs, while the -4 speed class addresses moderate clock-rate requirements. The 256-ball FTBGA also provides a dense package suitable for multilayer boards with careful escape routing. Plan configuration memory and startup behavior early, maintain clean power and ground distribution, and follow the family data sheet for decoupling. For new long-life platforms, compare the obsolete Spartan-3 device against a current FPGA family and perform a complete timing, toolchain, and lifecycle review.
推薦
推薦產品摘要
工程參考資料,適用於 XC3S1000-4FT256I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC3S1000-4FTG256I | XC3S1000-4FTG256C | XC3S1000-4FT256C | XC3S1000-5FTG256C | XC3S1000-4FT256I0750 |
|---|---|---|---|---|---|---|
| Package | FTBGA-256 (FT256) | FTBGA-256 (FT256) | FTBGA-256 (FT256) | FTBGA-256 (FT256) | FTBGA-256 (FT256) | FTBGA-256 (FT256) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Logic Cells | 17,280 logic cells | 17,280 logic cells | 17,280 logic cells | 17,280 logic cells | 17,280 logic cells | 17,280 logic cells |
| Logic Array Blocks | 1,920 CLBs | 1,920 CLBs | 1,920 CLBs | 1,920 CLBs | 1,920 CLBs | 1,920 CLBs |
| Embedded Memory | 432 kbit | 432 kbit | 432 kbit | 432 kbit | 432 kbit | 432 kbit |
| User I/O | 173 I/Os | 173 I/Os | 173 I/Os | 173 I/Os | 173 I/Os | 173 I/Os |
| Core Supply Voltage | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal |
| Speed Grade | -4 | -4 | -4 | -4 | -5 | 4-series ordering code; verify exact speed grade |
| Temperature Grade | Industrial grade | Industrial grade | Commercial grade | Commercial grade | Commercial grade | Industrial ordering class |
| System Gates | 1,000,000 gates | 1,000,000 gates | 1,000,000 gates | 1,000,000 gates | 1,000,000 gates | 1,000,000 gates |
主要差異化特點
- Industrial-grade ordering option (對比XC3S1000-4FT256C)
- Direct same-package G-coded sourcing option (對比XC3S1000-4FTG256I)
- Lower speed-class position than the -5 option (對比XC3S1000-5FTG256C)
- Higher timing margin than the -4 class (對比XC3S1000-4FTG256I)
設計說明
Use the AMD Spartan-3 package drawing and pin-assignment tables to create the FT256 land pattern and layer stackup. A generic 256-ball library is not sufficient because power, ground, configuration, and user-I/O balls must follow the manufacturer assignment. Route decoupling capacitors directly to the appropriate supply and ground balls, maintain continuous ground-plane coverage beneath the device, and inspect the finished PCB with the package-specific assembly rules.
Design the 1.2 V core rail and the required I/O supplies separately, following the voltage limits and sequencing guidance in AMD DS099-1. Use the worst-case resource utilization and I/O activity for thermal and regulator sizing. The device does not consume a fixed current across designs, so validate power-up order, startup current, and voltage tolerance using the actual bitstream and operating mode.
Apply family-specific clock and I/O timing constraints rather than relying on the nominal 630 MHz performance rating. Route clocks through supported clock-capable pins, control skew and jitter at the source, and use series termination where required by the output standard. For external memories and high-speed buses, analyze flyout, return paths, and loading with the actual board stackup before release.
Do not treat all XC3S1000 XC3S1000 FT256 order codes as automatically interchangeable. The -4 and -5 speed grades, C and I temperature suffixes, and G lead-free package designation affect qualification or performance selection. Preserve the programmed bitstream and configuration method when changing MPNs, and recompile and verify timing for the exact replacement rather than copying configuration files without review.
合規資訊
RoHS compliance is stated in the published XC3S1000 comparison information. The G-marked family option identifies a lead-free package variant, but the exact MPN requires current manufacturer declaration review.