XC3S1600E-5FG400C - 1.6M Gate Spartan-3E FPGA | AMD
MPN: XC3S1600E-5FG400C ✗ 停產XC3S1600E-5FG400C 概覽
An FPGA is a programmable-logic semiconductor whose interconnect and logic fabric can be configured after manufacture. In the product hierarchy, the XC3S1600E belongs to the Spartan-3E FPGA family, which combines configurable logic blocks, programmable input/output, block RAM, dedicated multipliers, and digital clock managers. This makes an FPGA more flexible than a fixed-function ASIC while supporting parallel processing and hardware acceleration that would be difficult to implement with conventional processors alone.
The key features of this device are its 33,192 logic cells, 3,688 CLBs, and 1,600,000 equivalent gates. The -5 speed designation corresponds to a maximum operating clock frequency of 657 MHz. Two dedicated digital clock managers are associated with the larger Spartan-3E devices in this family, supporting clock generation, phase shifting, and frequency management for high-speed designs. The 400-ball BGA also provides a substantial pin count for external memory interfaces, high-speed I/O, and multi-bank programmable logic.
The XC3S1600E-5FG400C uses 90 nm CMOS fabrication and a 1.2 V supply. Its 400-ball package has a 1.00 mm terminal pitch and a 21 mm square body, requiring a carefully designed multilayer PCB with short, impedance-controlled routes and a low-inductance power grid. Because the package exposes many high-speed signals and a large number of power connections, controlled-impedance layout, solid reference planes, and comprehensive power and ground-plane distribution are central to reliable operation.
Typical applications include industrial control, networking equipment, communications infrastructure, embedded video processing, data acquisition, and high-throughput digital signal processing. The large logic capacity can support parallel datapaths, protocol handling, and custom accelerators, while the dedicated clock and arithmetic resources address designs requiring deterministic timing. The same 400-ball package also supports prototype-to-production migration when the configured design, bitstream, pin constraints, and timing closure remain valid.
Before finalizing a PCB layout, verify ball assignments, power requirements, configuration pins, and differential I/O rules in the AMD DS312 family documentation. Treat the 657 MHz figure as a device maximum rather than guaranteed system performance: board routing, power integrity, IO standards, memory topology, and timing constraints determine the practical operating frequency.
This product page combines the verified XC3S1600E-5FG400C specifications with practical FPGA design guidance, package considerations, and clearly qualified same-family replacement options. It is intended to help engineers identify the correct device, plan the 400-ball BGA layout, and distinguish speed- or grade-related alternatives without treating a similar FPGA as a guaranteed drop-in replacement.
直接替換替代品,適用於 XC3S1600E-5FG400C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
XC3S1600E-4FG400CS1
✅ 直接替換📋 參考替代品(不在目錄中)
XC3S1600E-5FG400CS1
✅ 直接替換📋 參考替代品(不在目錄中)
XC3S1600E-4FG400C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC3S1600E-5FG400C 最大額定值與電氣特性
| Device Type | Field Programmable Gate Array (FPGA) |
| FPGA Family | Spartan-3E |
| Equivalent Logic Gates | 1,600,000 gates |
| Logic Cells | 33,192 cells |
| Configurable Logic Blocks | 3,688 CLBs |
| 最大時脈頻率 | 657 MHz |
| Process Technology | 90 nm CMOS |
| 供應電壓 | 1.2 V |
| 封裝 | 400-ball PBGA |
| Package Type | 400-terminal square PBGA |
| Terminal Pitch | 1.00 mm |
| Package Body Size | 21 mm x 21 mm |
| Programmable Logic | Spartan-3E configurable logic fabric |
| Dedicated Clock Managers | 2 DCMs for the XC3S1600E device |
| I/O Type | Selectable differential and single-ended I/O |
| 安裝類型 | Surface Mount |
XC3S1600E-5FG400C 21 mm x 21 mm 腳位配置指南
XC3S1600E-5FG400C(21 mm x 21 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC3S1600E-5FG400C.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC3S1600E-5FG400C 適用於 6 應用s: Industrial Networking Equipment, High-Speed Data Acquisition, Communications Signal Processing, Video and Image Processing, Embedded Control Systems, Test and Measurement Systems.
Industrial Networking Equipment
The XC3S1600E-5FG400C fits industrial network equipment that requires parallel packet classification, buffering, and protocol processing. Its 33,192 logic cells and 3,688 CLBs provide substantial configurable logic capacity, while the 400-ball PBGA offers enough connection density for external memory and high-speed interfaces. The device's listed 657 MHz maximum supports demanding internal datapaths, although actual timing depends on routing, IO standards, and board implementation. Production use also requires a careful supply and lifecycle check because the Spartan-3E generation is mature.
推薦
High-Speed Data Acquisition
The XC3S1600E-5FG400C is appropriate for data-acquisition systems that combine multiple input channels with parallel digital processing. Its 3,688 CLBs and 33,192 logic cells can implement acquisition control, filtering, decimation, and data packing, while the large package supports high pin-count connectivity. The listed 657 MHz device maximum provides headroom for parallel algorithms, but the final sampling rate and data throughput depend on valid I/O configurations and implemented timing paths. Power distribution and trace matching become critical when several high-speed channels operate simultaneously.
推薦
Communications Signal Processing
The XC3S1600E-5FG400C supports communications signal-processing designs requiring configurable parallel logic and dedicated clock management. Two DCMs in the XC3S1600E device can assist with clock generation, phase adjustment, and controlled distribution, while the 657 MHz maximum enables timing-intensive datapaths. Engineers can use the 1,600,000 equivalent gates for filters, symbol processing, or protocol engines. Practical line rates remain constrained by I/O standards, external transceiver interfaces, board-level timing, and the complete timing-closure report rather than by the device headline frequency alone.
推薦
Video and Image Processing
The XC3S1600E-5FG400C can implement parallel image-processing pipelines when the design requires programmable logic and numerous external connections. Its 33,192 logic cells are suited to color conversion, pixel transport, thresholding, and real-time filtering, and the 400-ball package supports wide external interfaces. The architecture allows designers to partition an algorithm across parallel pipelines instead of executing every operation serially. The achievable pixel rate must be established through system-level timing analysis, memory bandwidth analysis, I/O selection, and PCB signal-integrity verification.
推薦
Embedded Control Systems
The XC3S1600E-5FG400C is useful in embedded control systems that combine deterministic hardware logic, peripheral interfacing, and specialized state machines. Its configurable logic fabric can accelerate time-critical functions that would otherwise burden a general-purpose processor, and the 400-ball package provides extensive I/O connectivity. Two dedicated DCMs help establish controlled internal clock domains for multi-speed control logic. Timing-sensitive control loops require fixed placement and timing constraints, stable clocking, and comprehensive implementation review rather than relying solely on the listed 657 MHz maximum.
推薦
Test and Measurement Systems
The XC3S1600E-5FG400C fits programmable test and measurement systems requiring flexible sequencing, timing control, and concurrent signal handling. Its 3,688 CLBs can implement counters, pattern generators, trigger logic, acquisition control, and custom algorithms, while the large package permits extensive connection to converters and memory. Dedicated clock managers support controlled clock distribution for instrumentation requiring repeatable timing. Calibration, trigger latency, input bandwidth, and measurement uncertainty must be analyzed at system level, and the PCB should use controlled impedance and robust power-plane distribution.
推薦
推薦產品摘要
工程參考資料,適用於 XC3S1600E-5FG400C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC3S1600E-4FG400CS1 | XC3S1600E-5FG400CS1 | XC3S1600E-4FG400C |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | 400-ball PBGA, 21 mm x 21 mm, 1.00 mm pitch | 400-terminal square PBGA, 1.00 mm pitch | 400-ball PBGA, 1.00 mm pitch | 400-ball PBGA |
| FPGA Family | Spartan-3E | Spartan-3E | Spartan-3E | Spartan-3E |
| Equivalent Logic Gates | 1,600,000 gates | 1,600,000 gates | 1,600,000 gates | 1,600,000 gates |
| Logic Cells | 33,192 cells | 33,192 cells | 33,192 cells | 33,192 cells |
| Configurable Logic Blocks | 3,688 CLBs | 3,688 CLBs | 3,688 CLBs | 3,688 CLBs |
| Maximum Clock Frequency | 657 MHz | 572 MHz | 657 MHz | 572 MHz |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Special Feature | Two dedicated DCMs | Two dedicated DCMs | Two dedicated DCMs | Two dedicated DCMs |
主要差異化特點
- Higher listed maximum clock frequency within the same Spartan-3E family (對比XC3S1600E-4FG400CS1)
- Matching core density and package for constrained PCB reuse (對比XC3S1600E-4FG400CS1)
- Closest listed same-package configuration retains the -5 speed capability (對比XC3S1600E-4FG400CS1)
設計說明
Design the PCB around the 400-ball, 1.00 mm-pitch PBGA using a multilayer stack-up with continuous ground planes and short power connections. Place decoupling capacitors near the relevant supply balls, avoid plane splits beneath high-speed routes, and use the AMD DS312 package information to identify power, ground, configuration, and user I/O balls. Validate escape-routing density and assembly limitations before committing to the component placement because a nominal 21 mm by 21 mm body still requires substantial routing area around it.
Treat every high-speed interface as a controlled-impedance transmission-line structure. Match trace geometry and reference-plane continuity across layer transitions, minimize stubs and vias, and follow the AMD DS312 requirements for each supported I/O standard. Differential pairs should be routed with consistent spacing and symmetry. Perform post-layout signal-integrity analysis when edge rates, board length, external memory connections, or multi-drop interfaces materially increase risk.
Build the power network around the 1.2 V operating requirement and separate core, I/O, and auxiliary supply domains as defined in the device documentation. Estimate worst-case dynamic current from the implemented design rather than relying only on device-family averages. Provide local bulk and high-frequency decoupling, use a low-impedance power plane, and check startup, configuration, and I/O-load transients. Thermal and voltage-drop analysis should include both the FPGA and the PCB's power-delivery network.
Do not interpret the 657 MHz maximum as a guaranteed system clock. Timing closure depends on the selected I/O standard, logic placement, clocking topology, routing, and external interfaces. Use the -5 device database, apply appropriate clock and I/O timing constraints, and review the post-implementation timing report. When considering a -4 replacement, rerun timing analysis because the listed maximum decreases from 657 MHz to 572 MHz and may invalidate an existing timing margin.
合規資訊
The device is a legacy Spartan-3E FPGA; no definitive RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification declaration was identified for the exact ordering configuration.