XC4VSX25-11FF668C - 23,040-Cell Virtex-4 FPGA | AMD
MPN: XC4VSX25-11FF668C ✗ 停產XC4VSX25-11FF668C 概覽
A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and I/O behavior can be configured after fabrication. An FPGA belongs to the programmable-logic hierarchy, which also includes CPLDs, and provides substantially higher implementation density than discrete fixed-function logic. The Virtex-4 SX family combines configurable logic blocks, block RAM, dedicated digital signal processing resources, high-speed I/O, and programmable interconnect in one package.
The XC4VSX25 combines 23,040 logic cells with 128 DSP48 slices and 2,304 Kb of block RAM. Its 320 I/Os support interfaces for external memories and communications peripherals, while the -11 speed grade targets general-purpose designs requiring a defined performance class. The commercial-temperature ordering code corresponds to a 0°C to 85°C operating range for this device configuration.
Technically, the XC4VSX25 is optimized for balanced embedded processing, datapath, control, and signal-processing workloads. The DSP48 blocks accelerate multiply-accumulate operations, while block RAM supports buffering, packet queues, data acquisition, and local storage. The listed 1028 MHz internal-frequency figure is a device-level reference value; actual interface and design performance depend on the selected clocking resources, pin constraints, I/O standards, timing paths, and implemented logic.
Typical uses include industrial control, telecommunications, instrumentation, test and measurement, embedded signal processing, communications infrastructure, and high-performance data-acquisition systems. The combination of 320 I/Os, 2,304 Kb of block RAM, and 128 DSP48 slices makes the device suitable for parallel filtering, protocol handling, motor and motion control, and custom accelerator logic.
PCB design requires a 668-ball, 1.00 mm-pitch land pattern with careful power-plane, decoupling, clock, and high-speed routing discipline. Configuration memory and programming support must be implemented according to the AMD configuration guidance, while unused I/O behavior and pin assignments should be validated in the design tool before fabrication.
This product page combines the device identity, resource counts, package details, commercial availability workflow, drop-in family comparisons, and practical implementation considerations in one engineering reference. It also identifies when a higher-density, industrial-temperature, lead-free, or different-speed Virtex-4 SX member may be preferable for a specific design requirement.
直接替換替代品,適用於 XC4VSX25-11FF668C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC4VSX25-11FF668C (相同外形與佔位) — 差異在於 Logic Cells, Operating Temperature.
XC4VSX25-11FF668I
✅ 直接替換聯絡詢價
查看資料表 →XC4VSX25-11FFG668I
✅ 直接替換📋 參考替代品(不在目錄中)
XC4VSX25-11FFG668C
✅ 直接替換📋 參考替代品(不在目錄中)
XC4VSX35-11FFG668C
✅ 直接替換📋 參考替代品(不在目錄中)
XC4VSX35-10FFG668C
✅ 直接替換📋 參考替代品(不在目錄中)
XC4VSX25-11FF668C 最大額定值與電氣特性
| Device Type | Virtex-4 SX field-programmable gate array |
| Logic Cells | 23,040 logic cells |
| Configurable Logic Blocks | 2,560 CLBs |
| I/O Count | 320 I/Os |
| Block RAM | 2,304 Kb |
| DSP48 Slices | 128 DSP48 slices |
| Internal Frequency Reference | 1028 MHz |
| Speed Grade | -11 |
| Logic Technology | CMOS |
| Device Family | Virtex-4 SX |
| 封裝 | 668-ball FCBGA, 27 x 27 mm |
| Ball Pitch | 1.00 mm |
| Total Package Balls | 668 balls |
| 工作溫度 | 0°C to 85°C |
| Commercial Ordering Suffix | C suffix |
| 安裝類型 | Surface mount |
XC4VSX25-11FF668C 668 balls 腳位配置指南
XC4VSX25-11FF668C(668 balls 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC4VSX25-11FF668C.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC4VSX25-11FF668C 適用於 6 應用s: Industrial Control and Automation, Telecommunications Data Path, Digital Signal Processing, Test and Measurement Equipment, Embedded Data Acquisition, Communications Infrastructure.
Industrial Control and Automation
The XC4VSX25-11FF668C fits machine-control, motion-control, and industrial automation designs that combine sequential control with substantial parallel datapath logic. Its 23,040 logic cells can host control processors, state machines, communication interfaces, and diagnostics, while 128 DSP48 slices accelerate filtering, transforms, and closed-loop signal calculations. The 320 I/Os provide connections to sensors, actuators, encoders, and industrial transceivers. For installations exceeding 85°C, specify the industrial-temperature XC4VSX25-11FF668I and verify junction temperature, power integrity, and signal conditioning for the complete control cabinet.
推薦
Telecommunications Data Path
The XC4VSX25-11FF668C is appropriate for telecommunications packet processing, channelization, traffic management, and custom network-interface functions. Programmable I/O supports external component interfaces, while 2,304 Kb of block RAM can implement packet buffers, lookup structures, and timing windows. The 128 DSP48 slices support parallel filtering and signal arithmetic without consuming large amounts of general logic. A board-level design must account for clock quality, impedance-controlled differential routes, power delivery, and timing closure, since package compatibility alone does not guarantee interface-level performance.
推薦
Digital Signal Processing
The XC4VSX25-11FF668C supports DSP-intensive instrumentation, waveform generation, filtering, modulation, and spectral-analysis products. Each of its 128 DSP48 slices is optimized for multiply-accumulate workloads, allowing parallel filters or transforms to operate alongside control and interface logic in the 23,040-cell fabric. The 2,304 Kb of block RAM provides on-chip storage for samples, coefficient tables, and intermediate results. Clocking strategy, DSP cascade use, output timing, and memory bandwidth must be evaluated in the AMD implementation tools for the intended sample rate.
推薦
Test and Measurement Equipment
The XC4VSX25-11FF668C can implement modular test, measurement, and acquisition logic where deterministic sampling, timing control, and custom signal processing must coexist. Its programmable I/O and DSP48 resources support data capture, stimulus generation, calibration, and real-time analysis, while block RAM can buffer records between acquisition and processing stages. For laboratory-grade products, use a clean clock source, separate sensitive analog and digital supplies where required, and perform board-level signal-integrity validation. The commercial grade is appropriate for standard indoor ambient conditions within its specified range.
推薦
Embedded Data Acquisition
The XC4VSX25-11FF668C is well suited to embedded data-acquisition systems that collect parallel sensor channels and process them in real time. Its 320 I/Os can accommodate control signals and external data interfaces, 128 DSP48 slices can execute filters and transforms, and 2,304 Kb of block RAM can stage high-speed samples. The design should define acquisition-clock routing, I/O standards, input thresholds, and DMA structure before implementation. If the enclosure produces temperatures beyond the commercial range, use the industrial-temperature ordering option and validate thermal conditions at the device junction.
推薦
Communications Infrastructure
The XC4VSX25-11FF668C supports communications-infrastructure equipment requiring adaptable logic, moderate memory depth, and dedicated arithmetic resources. It can implement framing, classification, error handling, adaptation logic, and interface bridges in parallel, while DSP48 slices accelerate payload-processing functions. Its 320 I/Os permit connection to multiple lower-speed peripherals when the board's routing and timing budgets permit. For line-card designs, validate power-sequence behavior, configuration startup, clock jitter tolerance, and differential I/O constraints using the exact package and speed-grade documentation.
推薦
推薦產品摘要
工程參考資料,適用於 XC4VSX25-11FF668C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC4VSX25-11FF668I | XC4VSX25-11FFG668I | XC4VSX25-11FFG668C | XC4VSX35-11FFG668C | XC4VSX35-10FFG668C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 668-ball FCBGA | 668-ball FCBGA | 668-ball FCBGA | 668-ball FCBGA | 668-ball FCBGA | 668-ball FCBGA |
| Family | Virtex-4 SX | Virtex-4 SX | Virtex-4 SX | Virtex-4 SX | Virtex-4 SX | Virtex-4 SX |
| Speed Grade | -11 | -11 | -11 | -11 | -11 | -10 |
| Temperature Grade | Commercial, 0°C to 85°C | Industrial-temperature suffix I | Industrial-temperature suffix I | Commercial-temperature suffix C | Commercial-temperature suffix C | Commercial-temperature suffix C |
主要差異化特點
- Exact same-family resource configuration (對比XC4VSX25-11FF668I)
- Commercial-temperature exact-ordering counterpart (對比XC4VSX25-11FFG668C)
- Pin-compatible path to industrial temperature (對比XC4VSX25-11FFG668I)
設計說明
Implement the 668-ball FCBGA footprint at 1.00 mm pitch within the 27 x 27 mm package outline. Follow the AMD package drawing for ball locations, solder-mask definition, paste stencil, via-in-pad practices, and board-stackup compatibility. A dense BGA also requires careful escape routing from inner signal balls; plan power and ground connectivity so high-speed links and memory interfaces do not share compromised return paths. Validate the completed layout against the exact FF668 package documentation.
Partition the supply rails and place local decoupling close to the corresponding package balls according to the AMD power-distribution guidance. Separate or regulate noisy sources so switching and high-current loads do not inject disturbance into sensitive FPGA rails. Estimate total dissipation from the implemented design rather than relying on a device-level maximum, then verify junction temperature, voltage tolerance, sequencing, and startup behavior across the board's full operating range.
Treat external memory, clock, and high-speed I/O routes as constrained interfaces. Use the speed-grade-specific timing limits, account for loading, package effects, and board-level loss, and enforce continuous reference-plane return paths beneath high-speed routes. Clock inputs should receive clean distribution, while differential interfaces require length and skew control. The 1028 MHz internal-frequency reference is not a substitute for signal-integrity analysis or board-level timing closure.
Do not approve a replacement solely because it uses a 668-ball package. Confirm the device family, logic-cell and DSP capacity, speed grade, temperature range, configuration interface, pin assignments, and exact package ordering code. The XC4VSX35 options provide additional density but still require timing and power review, while the XC4VSX25 temperature and lead-free variants change environmental or ordering requirements rather than functional resource levels.
合規資訊
The device is an FPGA and is not presented as an AEC-Q100-qualified automotive product. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation for the exact ordering code and manufacturing status.