XC5VLX30-1FFG324I - 30,720 LEs, 220 I/O FPGA | AMD
MPN: XC5VLX30-1FFG324I ✗ 停產XC5VLX30-1FFG324I 概覽
A field-programmable gate array is a semiconductor whose digital logic and interconnections are configured after fabrication. Within the product hierarchy, an FPGA is a programmable logic device and a semiconductor. Virtex-5 LX devices provide a higher-density platform for parallel processing, interface bridging, control logic, embedded protocol handling, and general-purpose embedded systems where fixed logic would require multiple devices or later board revisions.
The XC5VLX30 device provides 30,720 logic cells, 220 user I/O, and 1,152 Kbit of block RAM in the 324-BBGA FCBGA package. Its 220 I/O make the part suitable for systems requiring substantial external connectivity. The -1 designation identifies the performance grade, while the I suffix denotes the industrial temperature option. A 550 MHz maximum operating frequency is listed for this device family, although designers must evaluate timing against their specific constraints, tool settings, and design implementation.
Compared with smaller CPLDs, this FPGA offers substantially more logic capacity and block RAM for concurrent datapaths. Its 220 I/O support more external memory, control, network, instrumentation, or industrial interfaces than a low-pin-count device. The large FCBGA package also provides dense routing and high I/O availability, but it requires careful escape-routing, via assignment, assembly, and thermal planning rather than a simple two-row PCB footprint.
Typical uses include industrial control, test and measurement, communications infrastructure, embedded signal processing, high-speed interface bridging, and programmable logic platforms. The 30,720-cell device can host parallel control logic alongside RAM-based data buffering, while the 220 I/O can support memory interfaces, serial links, clocks, and discrete controls. Design partitioning and resource utilization should be checked with the appropriate FPGA implementation toolchain.
Before layout, review the device pin table and package drawing for every power, ground, configuration, clock, and user-I/O connection. Decoupling networks, configuration interface routing, and BGA escape routing require careful PCB planning. Programming behavior, bank voltage limits, supported interfaces, and timing must also be checked against the manufacturer datasheet before schematic and layout release.
This product page organizes the core device identity, package information, practical use cases, drop-in alternatives, comparison criteria, and engineering considerations into a design-oriented reference for evaluating the XC5VLX30-1FFG324I.
直接替換替代品,適用於 XC5VLX30-1FFG324I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC5VLX30-1FFG324I (相同外形與佔位) — 差異在於 Package, RoHS Status, Device Type, Lead-Free Status, Mounting Type.
XC5VLX30-1FFG324C
✅ 直接替換聯絡詢價
查看資料表 →XC5VLX30-2FFG324I
✅ 直接替換📋 參考替代品(不在目錄中)
XC5VLX30-1FFG324CES
✅ 直接替換聯絡詢價
查看資料表 →XC5VLX30-1FF324I
✅ 直接替換聯絡詢價
查看資料表 →XC5VLX30-1FF324C
✅ 直接替換📋 參考替代品(不在目錄中)
XC5VLX30-1FFG324I 最大額定值與電氣特性
| Device Type | Virtex-5 LX field-programmable gate array |
| Logic Cells | 30,720 cells |
| User I/O | 220 I/O |
| 封裝 | 324-BBGA FCBGA |
| Package Dimensions | 19 x 19 mm |
| Speed Grade | -1 |
| 工作溫度範圍 | -40°C to +100°C |
| Block RAM | 1,152 Kbit |
| Maximum Operating Frequency | 550 MHz |
| Programmable Logic Type | FPGA |
| Logic Cell Count | 30,720 cells |
| User I/O Count | 220 I/O |
| Ball Count | 324 balls |
| RoHS 狀態 | Compliant |
XC5VLX30-1FFG324I 19 x 19 mm 腳位配置指南
XC5VLX30-1FFG324I(19 x 19 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC5VLX30-1FFG324I.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC5VLX30-1FFG324I 適用於 6 應用s: Industrial Control and Automation, Test and Measurement Instrumentation, Communications Interface Aggregation, Embedded Signal Processing, Programmable Logic Platform, High-Speed Interface Bridging.
Industrial Control and Automation
The XC5VLX30-1FFG324I fits industrial controllers that need deterministic programmable logic alongside many external signals. Its 30,720 logic cells can host state machines, sequencing logic, protocol handling, and supervisory functions, while 220 I/O provide substantial connectivity to sensors, actuators, relays, converters, and human-interface circuitry. The -40°C to +100°C industrial temperature range supports equipment operating across demanding ambient conditions. Implement the device beside a controller or as the central programmable logic element, then assign functions through the FPGA toolchain rather than fixing the logic in silicon. The principal design consideration is power and I/O planning: bank voltage requirements, external memory interfaces, and clock distribution must satisfy the device constraints, while BGA layout must preserve signal integrity and thermal performance.
推薦
Test and Measurement Instrumentation
The XC5VLX30-1FFG324I is well suited to modular test equipment requiring parallel acquisition logic, timing control, and extensive instrument interfacing. With 30,720 logic cells and 1,152 Kbit of block RAM, the FPGA can implement trigger logic, data formatting, counters, correlation, calibration tables, and interface adapters concurrently. Its 220 I/O support multiple instrument buses, control lines, status indicators, and external converters without immediately exhausting package connectivity. For a deterministic instrument, define clocks and timing constraints carefully, register high-speed interfaces, and isolate analog or sensitive routing from switching circuitry. The 550 MHz family-level maximum operating frequency provides a timing target, but each implemented path must be verified against its actual clock requirement and I/O standard.
推薦
Communications Interface Aggregation
The XC5VLX30-1FFG324I can consolidate several communications and control interfaces in a single programmable device. Its 30,720 logic cells allow parallel protocol engines, packet processing, buffering, and test logic to operate simultaneously, while 220 I/O leave ample room for serial links, reference clocks, control signals, and status reporting. The 1,152 Kbit of block RAM is useful for line-rate buffers, descriptors, and timing state. Place the FPGA as a bridge between processors, transceivers, and test equipment, and establish clock-domain boundaries explicitly in the design constraints. Signal-integrity work must cover controlled-impedance escapes, return paths, clock jitter, and crosstalk on the dense BGA fan-out rather than relying only on functional simulation.
推薦
Embedded Signal Processing
The XC5VLX30-1FFG324I supports embedded signal-processing tasks that benefit from parallel logic and configurable data paths. Engineers can use the 30,720 logic cells for filters, correlation, fixed-point arithmetic, modulation functions, or control algorithms and use the 1,152 Kbit of block RAM for sample buffers, coefficient storage, and rolling state. The 220 I/O allow simultaneous connections to converters, external memory, digital sensors, and supervisory controls. For high-throughput processing, pipeline each stage and constrain the actual system clocks rather than treating the listed 550 MHz maximum as a guaranteed rate for every design. Validate arithmetic width, pipeline latency, and resource sharing, and preserve timing margin through careful register placement and PCB clock distribution.
推薦
Programmable Logic Platform
The XC5VLX30-1FFG324I works well as the central programmable element of a reusable logic platform supporting multiple interface personalities. Its 30,720 logic cells and 220 I/O provide capacity for selectable protocol engines, counters, memory-mapped registers, diagnostics, and configuration logic, allowing one board design to serve multiple system roles. The 324-BBGA FCBGA package offers dense connectivity but makes assembly and board rework more demanding than a leaded FPGA. A platform design should partition optional features, reserve I/O for configuration and debug, and establish power sequencing and startup behavior before routing. Confirm that every supported interface, voltage bank, and timing requirement remains satisfied when the configuration changes.
推薦
High-Speed Interface Bridging
The XC5VLX30-1FFG324I can bridge legacy parallel, serial, memory, and processor interfaces when a design requires flexible protocol conversion. The 220 I/O accommodate multiple buses, while 30,720 logic cells support width conversion, buffering, clock-domain crossing, and protocol state machines. The 1,152 Kbit of block RAM can absorb short data bursts and manage asynchronous transfers between interfaces. Engineers should define which clock domains cross the device, constrain every generated clock, and avoid relying on combinational paths for timing-critical conversions. PCB implementation requires a controlled escape strategy for the 19 x 19 mm BGA, continuous return planes, and careful treatment of simultaneous switching signals to preserve data integrity.
推薦
推薦產品摘要
工程參考資料,適用於 XC5VLX30-1FFG324I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC5VLX30-1FFG324C | XC5VLX30-2FFG324I | XC5VLX30-1FFG324CES | XC5VLX30-1FF324I | XC5VLX30-1FF324C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 324-BBGA FCBGA | 324-BBGA FCBGA | 324-BBGA FCBGA | 324-BBGA FCBGA | 324-BBGA FCBGA | 324-BBGA FCBGA |
| Logic Cells | 30,720 cells | 30,720 cells | 30,720 cells | 30,720 cells | 30,720 cells | 30,720 cells |
| User I/O | 220 I/O | 220 I/O | 220 I/O | 220 I/O | 220 I/O | 220 I/O |
| Speed Grade | -1 | -1 | -2 | -1 | -1 | -1 |
| Programmable Logic Type | Virtex-5 LX FPGA | Virtex-5 LX FPGA | Virtex-5 LX FPGA | Virtex-5 LX FPGA | Virtex-5 LX FPGA | Virtex-5 LX FPGA |
主要差異化特點
- Industrial temperature coverage (對比XC5VLX30-1FFG324C)
- Higher performance option remains pin compatible (對比XC5VLX30-2FFG324I)
- High parallel logic and I/O density (對比XC5VLX30-1FF324I)
設計說明
The 19 x 19 mm 324-BBGA package requires an intentional escape-routing strategy. Assign every power, ground, configuration, clock, and user-I/O ball from the exact package documentation before schematic capture. Use short, referenced escape paths where practical, preserve continuous return planes beneath high-speed routes, and account for via-in-pad or microvia construction, solder-mask and paste requirements, component placement clearance, and the board's acceptable BGA assembly process.
Do not infer power-bank requirements or supply rails from the family name. Use the exact device datasheet and package power table to assign core and I/O supplies, confirm allowed I/O voltage combinations, and separate sensitive analog or transceiver rails where required. Place local high-frequency decoupling directly at the relevant supply and ground balls, then validate the distribution network for voltage drop, transient response, and simultaneous switching current. Configuration must also satisfy the manufacturer's power-up and sequencing rules.
Treat configuration, clock, and high-speed user interfaces as a complete signal-integrity problem. Use controlled-impedance routing, avoid splits across plane boundaries, minimize stub length, and provide return vias for each layer transition. The dense BGA escape area should be checked for crosstalk between adjacent fast signals, while clock distribution must have controlled skew and jitter. Validate timing with real constraints rather than relying on the listed 550 MHz family-level maximum as a guaranteed user frequency.
Estimated: a high-speed FPGA design can produce substantial local heat because core and I/O activity, power conversion, and density are concentrated beneath the 19 x 19 mm BGA. With a device power value of P watts and junction-to-ambient thermal resistance of R degrees C/W, the approximate junction rise is P multiplied by R. Use the actual selected package data and board construction for R, preserve copper for heat spreading, avoid enclosing the device without a thermal path, and validate the assembled board at the maximum expected ambient temperature.
合規資訊
The RoHS-compliant status is shown in the available XC5VLX30 comparison information. Other environmental and material compliance attributes are not established by the manufacturer information for this exact suffix.