AMD

XC5VLX30T-2FF323I - 30K Cell 323-BGA FPGA | AMD

MPN: XC5VLX30T-2FF323I ✗ 停產
1 V Vdss 323-ball FCBGA, 19 x 19 mm Package 1,098 MHz Speed
MOQ: 1 |

XC5VLX30T-2FF323I 概覽

The AMD/Xilinx XC5VLX30T-2FF323I is a Virtex-5 LXT field-programmable gate array with 30,720 logic cells, 172 I/O, 1,327,104 RAM bits, and a 1,098 MHz internal frequency, housed in a 323-ball FCBGA package measuring 19 x 19 mm. The device uses 65 nm CMOS technology and is specified for a 1 V supply and an industrial temperature range of 0°C to 85°C.

A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and signal-processing blocks are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, which includes complex programmable logic devices and system-level programmable devices. Virtex-5 LXT devices combine configurable logic, block RAM, dedicated DSP resources, and programmable I/O for communication, control, signal-processing, and test systems.

The XC5VLX30T's headline resources include 2,400 logic blocks, 30,720 logic cells, 172 user I/O, and 1,327,104 bits of block RAM. The -2 suffix identifies its speed grade, while the final I designation denotes the industrial temperature class. Its 323-ball FCBGA package supports dense board layouts while exposing substantially more interconnect and peripheral resources than a small plastic leaded package.

The device is based on the 65 nm CMOS Virtex-5 generation and uses the second-generation ASMBL column architecture identified in the manufacturer family documentation. The 1,098 MHz internal-frequency figure describes the device's internal logic performance capability; actual interface and system clock rates remain dependent on the selected I/O standard, board topology, timing constraints, and implemented design.

Typical applications include serial and parallel network interfaces, industrial control systems, instrumentation, signal-processing equipment, telecommunications infrastructure, and embedded test platforms. The combination of 30,720 logic cells and 1,327,104 RAM bits allows parallel datapaths, protocol engines, buffering, and control logic to be consolidated into one device when board area and component count are important.

The primary design consideration is package and PCB compatibility. A replacement must reproduce the 323-ball FCBGA land pattern, power architecture, configuration interface, and required I/O behavior. Designers should also evaluate configuration memory, clocking resources, bank voltage requirements, thermal margins, and the exact Virtex-5 bitstream constraints before upgrading an existing design.

This page consolidates the exact orderable MPN, package and resource information, qualified same-family drop-in candidates, comparison criteria, and practical design guidance into one engineering reference. It also distinguishes true footprint-compatible options from devices that differ in speed grade, temperature class, or package marking.

直接替換替代品,適用於 XC5VLX30T-2FF323I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

XC5VLX30T-2FFG323I

✅ 直接替換
📦 FCBGA-323 (19 x 19 mm)
Logic capacity is 30,720 cells versus 30,720 cells, a 0% resource difference; the FFG package suffix must be checked against the FF ball map

📋 參考替代品(不在目錄中)

XC5VLX30T-1FF323I

✅ 直接替換 ⚠️ 規格未經驗證
AMD
📦 FCBGA-323 (19 x 19 mm)
Virtex-5 LXT Field-Programmable Gate Array (FPGA) · 30,720 cells · 2,400 configurable logic blocks · 4,800 ALMs · 1,327,104 bits · 172 I/O · 1098 MHz · 0.95 V to 1.05 V

聯絡詢價

查看資料表 →

XC5VLX30T-3FF323I

✅ 直接替換 ⚠️ 規格未經驗證
📦 FCBGA-323 (19 x 19 mm)
Logic capacity is 30,720 cells versus 30,720 cells, a 0% resource difference; speed grade changes from -2 to -3

📋 參考替代品(不在目錄中)

XC5VLX30T-1FFG323I

✅ 直接替換 ⚠️ 規格未經驗證
📦 FCBGA-323 (19 x 19 mm)
Logic capacity is 30,720 cells versus 30,720 cells, a 0% resource difference; speed grade changes from -2 to -1 and package suffix changes from FF to FFG

📋 參考替代品(不在目錄中)

XC5VLX30T-3FFG323I

✅ 直接替換 ⚠️ 規格未經驗證
📦 FCBGA-323 (19 x 19 mm)
Logic capacity is 30,720 cells versus 30,720 cells, a 0% resource difference; speed grade changes from -2 to -3 and package suffix changes from FF to FFG

📋 參考替代品(不在目錄中)

XC5VLX30T-2FF323I 最大額定值與電氣特性

Product Type Virtex-5 LXT field-programmable gate array
Logic Cells 30,720 cells
Logic Blocks 2,400 blocks
Total RAM 1,327,104 bits
User I/O 172 I/O
Internal Frequency 1,098 MHz
Device Technology 65 nm CMOS
Core Supply Voltage 1 V
Package Type 323-ball FCBGA, 19 x 19 mm
Package Pin Count 323 pins
工作溫度 0°C to 85°C
Temperature Grade Industrial
Speed Grade -2
FPGA Architecture Virtex-5 LXT
Silicon Architecture Second-generation ASMBL column

XC5VLX30T-2FF323I 323 pins 腳位配置指南

XC5VLX30T-2FF323I(323 pins 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

XC5VLX30T-2FF323I 的 323 pins 封裝腳位圖

無詳細腳位定義資料: XC5VLX30T-2FF323I.

請參閱 資料表 以查看完整腳位配置。

典型應用

XC5VLX30T-2FF323I 適用於 6 應用s: Industrial Control Systems, Network Interface Equipment, Test and Measurement Systems, Telecommunications Infrastructure, Signal Processing Equipment, Aerospace Ground Equipment.

🏭

Industrial Control Systems

The AMD/Xilinx XC5VLX30T-2FF323I fits industrial controllers that combine sequencing, communication, and data acquisition in one programmable device. Its 30,720 logic cells and 2,400 logic blocks can implement motion-control state machines, machine interlocks, I/O decoding, and diagnostic logic, while 1,327,104 RAM bits support packet buffering and local data storage. The industrial temperature rating of 0°C to 85°C suits controlled equipment environments. The 323-ball FCBGA package also supports designs requiring 172 I/O, although the PCB must provide the specified power rails, decoupling, configuration interface, and proper ball-grid layout.

🌐

Network Interface Equipment

The XC5VLX30T-2FF323I is appropriate for network-interface and protocol-processing equipment requiring parallel datapaths and substantial buffering. With 30,720 logic cells, the FPGA can combine transmit and receive framing, CRC processing, packet classification, flow control, and host-interface logic. Its 1,327,104 RAM bits provide dedicated capacity for packet queues, while 172 I/O support parallel buses, status signals, clocks, and differential signaling where the selected I/O standards permit. The listed 1,098 MHz internal frequency supports demanding synchronous logic, but actual line rates require board-level signal-integrity analysis and static timing closure.

🔧

Test and Measurement Systems

The AMD/Xilinx XC5VLX30T-2FF323I can serve as the central programmable engine in instrumentation and automated test equipment. Its 30,720 logic cells can accommodate acquisition pipelines, trigger logic, pattern generators, counters, and analysis functions, while 1,327,104 RAM bits support sample buffers and correlation windows. The 172 available I/O allow parallel measurement channels, control signals, synchronization inputs, and external memory interfaces to be consolidated. For high-speed instrumentation, designers must select suitable I/O standards, implement compliant clocking, control skew through PCB routing, and verify timing for the intended temperature and speed grade.

🌐

Telecommunications Infrastructure

The XC5VLX30T-2FF323I supports parallel telecommunications interface, aggregation, and control functions where programmable logic and dedicated RAM are required. Its 30,720 logic cells can implement multiplexers, protocol converters, traffic classifiers, clock-domain crossing logic, and supervisory state machines. The 1,327,104 RAM bits are useful for packet buffering and timing alignment, while the 323-ball FCBGA package exposes 172 I/O for high-density board integration. Deployment in line-card equipment requires careful attention to power integrity, termination, jitter performance, configuration reliability, and the separation of high-speed and sensitive routing.

📡

Signal Processing Equipment

The XC5VLX30T-2FF323I is well matched to parallel signal-processing pipelines that benefit from configurable logic and block RAM. Digital filters, correlation engines, data-format converters, digital down-conversion control paths, and real-time channel processing can be distributed across 2,400 logic blocks and 30,720 logic cells. Its 1,327,104 RAM bits allow locally stored coefficients, reference waveforms, and sample windows without relying on external memory for every operation. The 1,098 MHz internal-frequency listing indicates substantial processing capability, but designers must implement pipelining deliberately and validate timing, resource use, and I/O constraints in the target Vivado design.

✈️

Aerospace Ground Equipment

The XC5VLX30T-2FF323I can be evaluated for aerospace ground-support equipment because it combines configurable logic, memory, and a high-density 172-I/O interface in an industrial-temperature 323-ball FCBGA package. Ground systems can use its 30,720 logic cells for acquisition sequencing, telemetry processing, stimulus generation, and communication protocol logic, with 1,327,104 RAM bits supporting local data storage. The device is not automatically qualified for airborne use; engineers must apply the relevant system assurance process, examine radiation and reliability requirements, verify assembly capability, and complete environmental testing for every deployed configuration.

推薦產品摘要

XC5VLX30T-2FFG323I Same-capacity Virtex-5 LXT option for package comparison 用於: Industrial Control Systems, Test and Measurement Systems, Signal Processing Equipment XC5VLX30T-1FF323I AMD 用於: Industrial Control Systems, Telecommunications Infrastructure, Signal Processing Equipment, Aerospace Ground Equipment XC5VLX30T-3FF323I Same-footprint family alternative for lower timing targets 用於: Network Interface Equipment, Telecommunications Infrastructure, Aerospace Ground Equipment XC5VLX30T-1FFG323I Same-capacity Virtex-5 LXT package alternative 用於: Network Interface Equipment XC5VLX30T-3FFG323I Same-resource lower-speed family candidate 用於: Test and Measurement Systems
What are the key specifications of XC5VLX30T-2FF323I that engineers should know?
The XC5VLX30T-2FF323I provides 30,720 logic cells, 2,400 logic blocks, 172 I/O, and 1,327,104 RAM bits in a 323-ball FCBGA package. According to the AMD/Xilinx Virtex-5 family documentation, it uses 65 nm CMOS technology, has a listed internal frequency of 1,098 MHz, operates from a 1 V core supply, and is rated from 0°C to 85°C. The -2 speed designation and industrial I suffix are also important orderable-device identifiers.
Where can I download the XC5VLX30T-2FF323I datasheet PDF?
The XC5VLX30T-2FF323I datasheet and related product documents are accessible through the AMD/Xilinx datasheet listing linked on this page. The Octopart document entry also provides a download path for the latest device datasheet. Before programming or laying out a replacement board, consult the Virtex-5 datasheet, configuration user guide, package drawing, and pinout for the exact XC5VLX30T-2FF323I ordering code.
Where can I find the XC5VLX30T-2FF323I pinout?
The XC5VLX30T-2FF323I pinout is defined in the Virtex-5 package pinout and package drawing associated with the AMD/Xilinx manufacturer documentation. The device uses a 323-ball FCBGA package, so PCB layout must be based on the ball-map table rather than a conventional lead numbering diagram. Verify power, ground, configuration, clock, and user-I/O balls directly against the manufacturer package documents before releasing fabrication data.
What is the difference between XC5VLX30T-2FF323I and XC5VLX30T-1FF323I?
The principal difference is the speed grade: XC5VLX30T-2FF323I carries the -2 designation, while XC5VLX30T-1FF323I carries the -1 designation. Both retain 30,720 logic cells and the 323-ball FCBGA package, so the land pattern can remain unchanged. The exact -1 performance limits and timing margins must be checked in the corresponding device documentation before using it as a timing-driven replacement.
Can XC5VLX30T-2FFG323I replace XC5VLX30T-2FF323I on the same PCB?
The XC5VLX30T-2FFG323I is a close same-family candidate because it retains the -2 speed designation and uses the 323-ball FCBGA format. Package documentation must confirm that the FFG and FF ball maps, power requirements, and assembly process are identical for the intended production use. The device marking and ordering code should be reviewed carefully because the package suffix can also carry assembly, lead-free, or material-status distinctions.
What can replace XC5VLX30T-2FF323I as a drop-in part?
The closest drop-in candidates are the XC5VLX30T-1FF323I, XC5VLX30T-3FF323I, XC5VLX30T-2FFG323I, XC5VLX30T-1FFG323I, and XC5VLX30T-3FFG323I within the Virtex-5 LXT family. Each retains the 30,720-cell device and 323-ball FCBGA format, while the suffix identifies speed-grade, package, and temperature-related differences. Confirm timing, ball map, power rails, configuration behavior, and bitstream compatibility for the exact replacement.
Is XC5VLX30T-2FF323I the same as XC5VLX30T-2FFG323I?
The XC5VLX30T-2FFG323I is not automatically interchangeable with the XC5VLX30T-2FF323I despite sharing the -2 speed grade, 30,720 logic cells, and 323-ball FCBGA format. The package suffix may denote a different ball-map, assembly, lead-free, or material-status configuration. According to the relevant manufacturer ordering documentation, engineers should treat it as a drop-in candidate only after comparing the exact package drawings and device tables.
When should I choose XC5VLX30T-2FF323I over a lower-speed grade?
Choose the -2 grade when the timing target requires more margin than the -1 device provides or when a common footprint must support the higher-performance grade. The XC5VLX30T-2FF323I combines a listed 1,098 MHz internal frequency with 30,720 logic cells and a 323-ball FCBGA package. Selection should still be based on the worst-case operating condition, implemented clock paths, I/O timing, and the complete static timing analysis rather than internal frequency alone.
When should I choose XC5VLX30T-2FF323I over a -3 speed grade?
Choose the XC5VLX30T-2FF323I when the design needs higher timing performance than the -3 grade while retaining the same general device footprint. The -2 grade is listed at a 1,098 MHz internal frequency and includes 30,720 logic cells, 2,400 logic blocks, 172 I/O, and 1,327,104 RAM bits. A -3 device may still satisfy a low-speed design, but its timing closure and operating-temperature requirements should be confirmed before substitution.
Is XC5VLX30T-2FF323I suitable for industrial control and instrumentation systems?
The XC5VLX30T-2FF323I is suitable for many industrial control and instrumentation systems because its industrial temperature designation covers 0°C to 85°C. It provides 30,720 logic cells and 1,327,104 RAM bits for control logic, acquisition pipelines, and protocol handling, while its 323-ball FCBGA package supports dense multi-I/O designs. Final suitability also depends on system temperature, electromagnetic requirements, long-term availability, and qualification expectations.
What is the best AMD/Xilinx equivalent for XC5VLX30T-2FF323I?
The best AMD/Xilinx equivalents are same-family XC5VLX30T variants that preserve the 30,720-cell resource level and 323-ball FCBGA footprint. XC5VLX30T-2FFG323I is the closest speed-grade candidate, while the -1 and -3 FF or FFG variants cover different timing and assembly requirements. The manufacturer part tables, package drawings, and timing data must establish which exact suffix is electrically and mechanically interchangeable.
Where can I buy XC5VLX30T-2FF323I and check current availability?
Use the Request a Quote form on this page to ask about XC5VLX30T-2FF323I availability, order quantities, lead time, and the required delivery configuration. The part is a legacy Virtex-5 LXT device in a 323-ball FCBGA package, so availability may depend on the exact ordering suffix and whether new or factory-authorized inventory is required. The request should identify the required quantity, target date, and destination country.
What is the price of XC5VLX30T-2FF323I?
Current commercial terms for the XC5VLX30T-2FF323I should be requested through the Request a Quote form on this page. The quote should specify the quantity, packaging requirement, production schedule, and delivery country. Because this is a legacy FPGA with an exact package and temperature suffix, buyers should avoid accepting a substitute without written confirmation of the MPN, grade, ball map, and assembly conditions.
What is the lead time for XC5VLX30T-2FF323I?
The current lead time for XC5VLX30T-2FF323I should be confirmed through the Request a Quote form on this page. Lead time can vary with quantity, whether the devices are new or factory-authorized inventory, inspection requirements, and production continuity. Include the required shipment date and annual usage so the supplier can distinguish a one-time prototype purchase from a scheduled production replenishment.
Is XC5VLX30T-2FF323I currently in stock?
Stock for the exact XC5VLX30T-2FF323I should be confirmed through the Request a Quote form on this page. A valid inquiry should specify the quantity, required -2 speed grade, industrial temperature class, and 323-ball FCBGA package. Do not treat a listing for a different FF, FFG, speed-grade, or temperature suffix as confirmation that the exact ordered device is available.

工程參考資料,適用於 XC5VLX30T-2FF323I — 比較、設計指引及合規資訊。

選型指南

Choose the XC5VLX30T-2FF323I when an existing Virtex-5 LXT design requires the -2 speed grade, the 30,720-cell resource level, 172 I/O, and the 323-ball FCBGA format. The XC5VLX30T-2FFG323I is the closest listed same-speed alternative, but its package and ordering characteristics must be checked against the exact board and assembly requirements. Select a -1 variant when lower timing demand is acceptable, and a -3 variant when relaxed performance is sufficient. Do not select these parts solely by family name or logic-cell count: review the manufacturer ordering table, ball map, temperature marking, electrical limits, and static timing report. For new designs, also consider whether a currently supported FPGA platform would provide better tool, supply, and lifecycle support than this legacy Virtex-5 device.

與替代品比較

參數 本產品 XC5VLX30T-2FFG323I XC5VLX30T-1FF323I XC5VLX30T-3FF323I XC5VLX30T-1FFG323I XC5VLX30T-3FFG323I
Brand AMD AMD AMD AMD AMD AMD
Package FCBGA-323 (19 x 19 mm) FCBGA-323 (19 x 19 mm) FCBGA-323 (19 x 19 mm) FCBGA-323 (19 x 19 mm) FCBGA-323 (19 x 19 mm) FCBGA-323 (19 x 19 mm)
Logic Cells 30,720 cells 30,720 cells 30,720 cells 30,720 cells 30,720 cells 30,720 cells
Logic Blocks 2,400 blocks 2,400 blocks 2,400 blocks 2,400 blocks 2,400 blocks 2,400 blocks
RAM Bits 1,327,104 bits 1,327,104 bits 1,327,104 bits 1,327,104 bits 1,327,104 bits 1,327,104 bits
User I/O 172 I/O 172 I/O 172 I/O 172 I/O 172 I/O 172 I/O
Speed Grade -2 -2 -1 -3 -1 -3
Process Technology 65 nm CMOS 65 nm CMOS 65 nm CMOS 65 nm CMOS 65 nm CMOS 65 nm CMOS
Operating Temperature 0°C to 85°C 0°C to 85°C 0°C to 85°C 0°C to 85°C 0°C to 85°C 0°C to 85°C

主要差異化特點

  • Same resource level as the closest package candidate (對比XC5VLX30T-2FFG323I)
  • Higher speed grade than the -3 family alternatives (對比XC5VLX30T-3FF323I)
  • Retains the original FF package family for close board reuse (對比XC5VLX30T-1FFG323I)

設計說明

Treat the 323-ball FCBGA as a high-density, fine-pitch assembly rather than a generic BGA footprint. Assign the complete ball map from the manufacturer package drawing, preserve all required power and ground balls, and follow the prescribed via, solder-mask, and land-pattern rules. Do not interchange FF and FFG ordering codes based only on the shared 323-ball description; verify the exact package drawing and assembly notes before PCB release.

Use the manufacturer power-decoupling topology, including the specified capacitor types, placement, and vias, for both the 1 V core and any required I/O supplies. Separate sensitive and noisy supply paths where the design guide identifies different power domains. Validate droop during configuration and high-utilization switching because the listed internal frequency is not a direct measure of acceptable board-level power-supply impedance.

Route clock and high-speed interfaces using controlled-impedance stack-up rules and account for package and via transitions in simulation. The 172-I/O count does not imply that every interface can operate at the same high rate; usable performance depends on the selected I/O standard, pin placement, bank voltage, source-synchronous or synchronous timing requirements, and external clock quality. Check every proposed alternative against the same timing and signal-integrity constraints.

Do not assume that equal logic-cell counts make every XC5VLX30T ordering suffix interchangeable. Speed grade, package suffix, temperature marking, configuration behavior, and assembly requirements can change even when the family and ball count remain the same. Before substituting a part, compare the manufacturer ordering tables, package pinout, electrical limits, and the complete static timing results for the intended Vivado configuration.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The available product information identifies the device as an industrial-temperature FPGA but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The FF and FFG ordering suffixes should not be interpreted as independent proof of lead-free compliance without the manufacturer declaration.

資料驗證日期: 2026-11-14 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

XC5VLX30T-2FF323I datasheet XC5VLX30T-2FF323I pinout XC5VLX30T-2FF323I specifications XC5VLX30T-2FF323I equivalent XC5VLX30T-2FF323I replacement XC5VLX30T-2FF323I cross reference XC5VLX30T-2FF323I price XC5VLX30T-2FF323I stock AMD XC5VLX30T-2FF323I XC5VLX30T-2FF323I vs XC5VLX30T-1FF323I XC5VLX30T-2FF323I application circuit XC5VLX30T 323 BGA pinout

相關元件與詞彙

AMD AMD/Xilinx XC5VLX30T-2FF323I XC5VLX30T-2FFG323I XC5VLX30T-1FF323I XC5VLX30T-3FF323I XC5VLX30T-1FFG323I XC5VLX30T-3FFG323I Virtex-5 LXT field-programmable gate array FPGA programmable logic logic cell logic block block RAM CMOS 65 nm process technology FCBGA-323 QFN family surface mount SMD JEDEC IPC RoHS REACH industrial control network interface signal processing test and measurement power management IC
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情