XC5VSX50T-1FF665I - Virtex-5 SXT FPGA | AMD | 52K Logic
MPN: XC5VSX50T-1FF665I ✗ 停產XC5VSX50T-1FF665I 概覽
A field-programmable gate array is a semiconductor whose digital circuits are defined through a configuration bitstream rather than fixed mask patterns. Within the product hierarchy, an FPGA is a programmable-logic device and semiconductor. The Virtex-5 SXT family extends that hierarchy into a high-performance architecture optimized for parallel signal processing, high-speed connectivity, embedded storage, and demanding digital signal-processing systems.
Key configuration details include 52,224 logic cells organized into 4,080 configurable logic blocks, 360 I/O sites, and a 665-ball flip-chip ball grid array package. The distributed memory and block RAM resources make the device useful for buffering, packet processing, filtering, waveform conversion, and control logic. Its large pin count supports broad interfaces, while the SXT feature mix targets designs requiring substantial parallel arithmetic and data movement.
The part uses the Virtex-5 programmable-logic architecture, including the Slice and configurable logic block structure, DSP48E multiplier-accumulator resources, SelectIO technology, and dedicated memory resources. A complete design also depends on configuration settings, supported I/O standards, clocking, power management, and the selected bitstream. Exact voltage, clock-frequency, resource-count, and thermal limits should be confirmed in the Virtex-5 SX data sheet and package documentation before release to production.
Typical applications include high-throughput digital filtering, software-radio baseband processing, industrial control and instrumentation, communications infrastructure, radar and signal-processing subsystems, and high-speed interface bridging. In these systems, the FPGA can execute parallel datapaths that are difficult to implement economically with fixed-function processors or discrete logic.
PCB design requires careful attention to the 665-ball FCBGA escape routing, power and ground-plane integrity, decoupling, via-in-pad requirements, and thermal management. Differential interfaces should follow the manufacturer’s package and board guidelines, while configuration pins and auxiliary functions must be terminated as specified in the design documentation.
This page combines the device identity, package characteristics, documented configuration details, drop-in candidates, comparison points, and implementation guidance needed to evaluate the XC5VSX50T-1FF665I before schematic capture, PCB layout, and legacy-product migration.
直接替換替代品,適用於 XC5VSX50T-1FF665I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC5VSX50T-1FF665I (相同外形與佔位) — 差異在於 Package, Configurable Logic Blocks, Device Type, Logic Cells, Package Type.
XC5VSX50T-1FFG665I
✅ 直接替換📋 參考替代品(不在目錄中)
XC5VSX50T-1FFV665I
✅ 直接替換📋 參考替代品(不在目錄中)
XC5VSX50T-2FFG665I
✅ 直接替換📋 參考替代品(不在目錄中)
XC5VSX50T-2FF665I
✅ 直接替換聯絡詢價
查看資料表 →XC5VLX50T-1FF665I
✅ 直接替換聯絡詢價
查看資料表 →XC5VSX50T-1FF665I 最大額定值與電氣特性
| Device Type | Virtex-5 SXT field-programmable gate array |
| Logic Cells | 52,224 logic cells |
| Configurable Logic Blocks | 4,080 CLBs |
| User I/O | 360 I/O |
| 封裝 | 665-FCBGA |
| Package Type | Flip-chip ball grid array |
| Package Ball Count | 665 balls |
| Performance Grade | -1 speed grade |
| Process Technology | CMOS |
| Programming Technology | Field-programmable logic |
| DSP Resource Type | DSP48E multiplier-accumulator resource |
XC5VSX50T-1FF665I 665 balls 腳位配置指南
XC5VSX50T-1FF665I(665 balls 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC5VSX50T-1FF665I.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC5VSX50T-1FF665I 適用於 6 應用s: Software Radio Baseband, Industrial Signal Conditioning, Communications Infrastructure, Radar and Test Equipment, High-Speed Interface Bridging, Aerospace and Defense Prototyping.
Software Radio Baseband
The AMD XC5VSX50T-1FF665I fits software-radio baseband functions that benefit from parallel datapaths and dedicated DSP48E resources. Its 52,224 logic cells and 4,080 configurable logic blocks can support filtering, carrier recovery, symbol processing, and protocol state machines within one programmable device. Designers can implement parallel arithmetic across multiple slices instead of relying on repeated software loops. The 360 user I/O also provides substantial connectivity for parallel converters, clocking, memory interfaces, and digital control. Practical implementation still requires confirming DSP48E slice count, block RAM, supported I/O standards, clock targets, and package-level power delivery. Re-run timing and resource mapping if the original design is migrated to another Virtex-5 suffix.
推薦
Industrial Signal Conditioning
The XC5VSX50T-1FF665I is suitable for industrial signal-conditioning systems that combine sampling control, digital filtering, thresholding, and communications in one FPGA. Its 4,080 configurable logic blocks provide substantial parallel capacity for fixed- and floating-point pipelines, while DSP48E resources accelerate multiply-accumulate stages. The 665-FCBGA package offers 360 I/O sites for converters, sensors, synchronization signals, and external memory. In a typical design, the FPGA would capture synchronized samples, perform fixed-point filtering, update thresholds, and transmit results over an industrial interface. Before hardware release, verify supported I/O voltage standards, clock-domain requirements, memory bandwidth, and timing closure. The -1 performance grade is also preferable when preserving higher clock targets without redesign.
推薦
Communications Infrastructure
The AMD XC5VSX50T-1FF665I can serve in communications infrastructure equipment that requires configurable packet handling, test circuitry, or high-rate data transformation. Its 52,224 logic cells support parallel control and data-routing functions, while 360 I/O sites allow multiple buses, status signals, and high-speed interfaces to be integrated on the same board. A practical implementation might combine a test-pattern generator, protocol checker, clocking logic, and data capture buffer. The Virtex-5 SXT architecture is particularly relevant when arithmetic and storage coexist with substantial control logic. Designers must use the official package and pinout data, confirm the supported SelectIO standards for each interface, and complete static timing analysis. Replacing the device with the -2 grade may reduce timing margin, so the lower speed should be selected only after synthesis and route timing are revalidated.
推薦
Radar and Test Equipment
The XC5VSX50T-1FF665I fits radar, instrumentation, and automated test applications that require concurrent acquisition control, waveform generation, and real-time analysis. Dedicated DSP48E resources can accelerate multipliers, filters, and correlation functions, while the 52,224 logic cells accommodate acquisition control, buffer management, trigger logic, and test sequencing. The 360-I/O device can connect parallel converters, memory devices, synchronization inputs, and communication channels. To use it effectively, partition the design into carefully clocked domains and maintain timing margin for high-speed data paths. Power planning should account for simultaneous DSP, I/O, and logic activity rather than a lightly loaded FPGA. Because the package contains 665 balls, PCB assembly also requires adequate escape routing, via-in-pad capability, and thermal spreading based on the manufacturer’s mechanical recommendations.
推薦
High-Speed Interface Bridging
The AMD XC5VSX50T-1FF665I is applicable to interface-bridging and protocol-conversion designs that need programmable pin mapping, wide data paths, and simultaneous control logic. The 360 I/O sites can accommodate multiple narrow interfaces, while 4,080 configurable logic blocks provide buffering, protocol state machines, and clock-domain crossing logic. An implementation might translate data between parallel and serial formats while adding framing, error detection, or test instrumentation. The exact supported I/O standards and achievable data rates depend on the device data sheet, selected pins, clocking architecture, and board-level signal integrity. Designers should use the official 665-FCBGA pinout file rather than infer connectivity from another package. If substituting a -2-grade device, compare setup and hold timing, external component tolerances, and post-route timing at the intended operating temperature.
推薦
Aerospace and Defense Prototyping
The XC5VSX50T-1FF665I can support legacy aerospace and defense prototypes that require programmable parallel processing, extensive I/O, and deterministic reconfiguration flexibility. Its 52,224 logic cells allow control functions to coexist with DSP pipelines, while the 360 I/O sites provide connectivity for converters, memory, synchronization, and redundant status paths. The device is suitable for engineering development, instrumentation, and ground-support systems where an existing Virtex-5 design is being maintained. Qualification status and permissible operating conditions must be confirmed for the exact ordering suffix before use in a flight program. Because no AEC-Q100 qualification is listed for this FPGA, do not treat it as an automotive-qualified component. For deployment, follow the applicable program requirements for radiation, reliability, traceability, long-term supply, and configuration security in addition to the manufacturer’s commercial specifications.
推薦
推薦產品摘要
工程參考資料,適用於 XC5VSX50T-1FF665I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC5VSX50T-1FFG665I | XC5VSX50T-1FFV665I | XC5VSX50T-2FFG665I | XC5VLX50T-1FF665I |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 665-FCBGA | 665-FCBGA - same package class | 665-FCBGA - same package class | 665-FCBGA - same package class | 665-FCBGA - same package class |
| FPGA Family | Virtex-5 SXT | Virtex-5 SXT | Virtex-5 SXT | Virtex-5 SXT | Virtex-5 LXT |
| Logic Cells | 52,224 logic cells | 52,224 logic cells | 52,224 logic cells | 52,224 logic cells | 46,080 logic cells |
| User I/O | 360 I/O | 360 I/O | 360 I/O | 360 I/O | 360 I/O |
| Speed Grade | -1 | -1 | -1 | -2 | -1 |
主要差異化特點
- Higher logic density than the same-package LXT alternative (對比XC5VLX50T-1FF665I)
- Original -1 performance grade retained (對比XC5VSX50T-2FFG665I)
- Identical published SXT resource configuration (對比XC5VSX50T-1FFG665I)
- Broad same-family migration path (對比XC5VSX50T-1FFV665I)
設計說明
Use the exact AMD Virtex-5 665-FCBGA land pattern and package pinout file rather than a generic 665-ball footprint. Validate pad dimensions, solder-mask definitions, via-in-pad requirements, and assembly process against the chosen package suffix. The same ball-count classification does not guarantee that every package construction has identical mechanical or thermal characteristics.
Partition the design by power domain and place decoupling capacitors directly at the relevant supply and ground balls. Validate steady-state and transient current against the core and I/O voltage specifications in the manufacturer documentation. Peak dissipation can be much higher during I/O activity or simultaneous DSP use, so base the power budget on the final utilization report rather than logic-cell occupancy alone.
Estimated: device dissipation equals the sum of core power, I/O power, and auxiliary-circuit power. Multiply the resulting power by the package thermal resistance to estimate junction-temperature rise above ambient. Use the actual PCB stack-up and copper area, and include adjacent heat sources, because a laboratory FCBGA thermal result may not represent a densely populated industrial board.
Do not treat the -1 and -2 ordering grades as interchangeable without rerunning timing analysis. Device speed, I/O timing, external memory timing, and internal clock margins can differ even when the package and logic-cell totals match. Preserve the original bitstream only for an exact device and configuration match; generate and validate a new bitstream for every actual substitution.
合規資訊
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact MPN. The industrial temperature suffix indicates the I-grade family, but it does not establish AEC-Q100 qualification.