XC7Z020-2CLG484CES - 766MHz Dual-Core Zynq SoC | AMD
MPN: XC7Z020-2CLG484CES ✓ 啟用中XC7Z020-2CLG484CES 概覽
A Zynq-7000 SoC belongs to the FPGA and CPLD product category while also functioning as an application processor. Its integrated processing system executes operating systems and application software, while its programmable logic fabric implements custom accelerators, interfaces, protocols, and real-time datapaths. This combination makes the device useful when a design requires more flexibility than a discrete microcontroller but more processing capability than a conventional programmable logic device.
The XC7Z020-2CLG484CES provides 85,000 logic cells and a maximum stated operating frequency of 766 MHz in the device listing. Its dual Arm Cortex-A9 architecture supports parallel application execution, while CoreSight provides integrated processor debug visibility. The 484-CSPBGA package exposes the programmable logic, processing system, power, clock, configuration, and memory interfaces through a dense 19 mm by 19 mm ball-grid array.
Technologically, the Zynq-7000 architecture separates the ARM processing system from the FPGA fabric rather than embedding a soft processor in LUT-based logic. Firmware runs on the Arm cores, while hardware blocks can exchange data with the processor through tightly coupled interfaces. This division allows control software and hardware acceleration to operate concurrently, reducing the need for external processors or discrete accelerator devices.
Typical uses include industrial control gateways, networked embedded systems, camera and image-processing systems, programmable automation equipment, communications infrastructure, and embedded data-acquisition platforms. The integrated processor handles control functions, networking stacks, and application logic, while the programmable fabric can accelerate data movement or implement device-specific interfaces.
PCB design requires careful attention to the 484-CSPBGA footprint, multilayer escape routing, power and ground distribution, and thermal management. Use AMD package pinout files and the XC7Z020 data sheet when assigning every ball and power rail. The exact pin assignments and decoupling requirements should be checked against the latest manufacturer documentation before layout release.
This page consolidates the confirmed processor, logic-cell, frequency, and package characteristics, plus practical comparison and selection guidance. It also distinguishes speed- and temperature-grade alternatives that can reuse the same CLG484 footprint while helping engineers assess whether their design requires a lower-speed, industrial-temperature, or extended-temperature replacement.
直接替換替代品,適用於 XC7Z020-2CLG484CES — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC7Z020-2CLG484CES (相同外形與佔位) — 差異在於 Package, Device Type, Mounting Type, Logic Cells, Programmable Logic.
XC7Z020-2CLG484I
✅ 直接替換✓ 有庫存
$49 / 單位
查看資料表 →XC7Z020-2CLG484E
✅ 直接替換聯絡詢價
查看資料表 →XC7Z020-1CLG484I
✅ 直接替換✓ 有庫存
$45.9375 / 單位
查看資料表 →XC7Z020-1CLG484C
✅ 直接替換聯絡詢價
查看資料表 →XC7Z020-2CLG484CES 最大額定值與電氣特性
| Device Type | Zynq-7000 system-on-chip |
| Processor Core | Dual-core Arm Cortex-A9 MPCore |
| Debug Support | CoreSight |
| Maximum Stated Frequency | 766 MHz |
| FPGA Logic Cells | 85,000 cells |
| Programmable Logic | Artix-7 FPGA logic |
| 封裝 | 484-CSPBGA |
| Package Dimensions | 19 mm x 19 mm |
| Package Type | Chip-scale BGA |
| 安裝類型 | Surface mount |
| Processor Architecture | Arm Cortex-A9 |
| Processor Configuration | Dual core |
| Device Speed Grade | 2 |
XC7Z020-2CLG484CES chip-scale bga 腳位配置指南
XC7Z020-2CLG484CES(chip-scale bga 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC7Z020-2CLG484CES.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC7Z020-2CLG484CES 適用於 6 應用s: Industrial Control Gateway, Camera and Image Processing, Programmable Automation Equipment, Network Communication Equipment, Embedded Data Acquisition, Secure IoT Edge Device.
Industrial Control Gateway
The XC7Z020-2CLG484CES fits an industrial control gateway because its dual Arm Cortex-A9 cores can run protocol stacks, supervisory software, and communications services while the 85,000-cell FPGA fabric implements deterministic control logic. The listed 766 MHz processor frequency supports responsive network and real-time tasks without requiring a separate FPGA. Engineers can assign custom serial, fieldbus, or acquisition interfaces to the programmable logic and exchange data with the processing system through dedicated interfaces. The 484-CSPBGA package requires multilayer escape routing and careful power delivery, while the device’s thermal performance must be checked against the enclosure temperature and board copper area.
推薦
Camera and Image Processing
The XC7Z020-2CLG484CES supports camera and image-processing systems that divide work between software and programmable hardware. The dual Arm Cortex-A9 cores can execute image algorithms, exposure control, buffering, and network transmission, while the 85,000 logic cells can accelerate pixel transport, filtering, or format conversion. Its stated 766 MHz processor frequency provides additional throughput for control tasks around the accelerator. The 484-CSPBGA footprint demands dense escape routing for sensor interfaces and memory, and engineers should verify available transceiver, DSP, and memory resources against the selected image format and frame rate before finalizing the architecture.
推薦
Programmable Automation Equipment
The XC7Z020-2CLG484CES is suitable for programmable automation equipment requiring flexible sequencing, machine control, and high-speed local logic. Firmware on the dual Cortex-A9 cores can coordinate motion, diagnostics, recipes, and operator interfaces, while the FPGA fabric can implement deterministic pulse generation, encoder capture, or custom machine I/O. With 85,000 logic cells and a listed 766 MHz operating frequency, the device combines general-purpose control and hardware customization in one package. The 19 mm by 19 mm 484-CSPBGA layout reduces board area compared with separate processor and FPGA implementations, but it also requires advanced assembly capability and a carefully designed multilayer PCB.
推薦
Network Communication Equipment
The XC7Z020-2CLG484CES can serve as the main controller in embedded network communication equipment because the Arm Cortex-A9 MPCore subsystem handles network stacks and management tasks while the programmable logic fabric provides customizable packet handling or interfaces. The dual-core configuration allows processing tasks to be partitioned between cores, and the 85,000-cell fabric can offload latency-sensitive datapaths. Its listed 766 MHz frequency supports higher software throughput than a -1 grade option, although the final design must still be constrained against the relevant clock and I/O standards. The 484-CSPBGA package needs clean power distribution, controlled-impedance routing, and careful decoupling around every specified supply rail.
推薦
Embedded Data Acquisition
The XC7Z020-2CLG484CES is well suited to embedded data-acquisition equipment that must combine sensor control, real-time sampling, and local processing. The programmable logic can implement deterministic acquisition pipelines, trigger logic, or custom sensor interfaces, while the dual Arm Cortex-A9 cores perform analysis, calibration, storage management, and communications. The 85,000 logic cells and stated 766 MHz processor frequency provide a practical balance between hardware parallelism and software flexibility. For high sample rates, engineers should confirm available I/O, memory-interface, and clock resources in the manufacturer documentation. The 484-CSPBGA land pattern also requires BGA-aware assembly, thermal analysis, and production inspection.
推薦
Secure IoT Edge Device
The XC7Z020-2CLG484CES can support an IoT edge device that needs local processing, secure connectivity, and adaptable sensor interfaces. Its dual Cortex-A9 cores can run the network stack, encryption services, and application logic, while the FPGA fabric can accelerate packet processing or implement device-specific interfaces. The 85,000-cell fabric and listed 766 MHz operating frequency allow more workload consolidation than a microcontroller-only design. Because an edge appliance may operate in a compact enclosure, engineers must provide adequate copper area, ventilation, and verified decoupling for the 484-CSPBGA package. Software support and device identifiers must also be checked during production planning to avoid uncontrolled migration.
推薦
推薦產品摘要
工程參考資料,適用於 XC7Z020-2CLG484CES — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC7Z020-2CLG484I | XC7Z020-2CLG484E | XC7Z020-1CLG484I | XC7Z020-1CLG484C |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 484-CSPBGA, 19 mm x 19 mm | 484-CSPBGA, 19 mm x 19 mm | 484-CSPBGA, 19 mm x 19 mm | 484-CSPBGA, 19 mm x 19 mm | 484-CSPBGA, 19 mm x 19 mm |
| Processor | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore |
| Logic Cells | 85,000 cells | 85,000 cells | 85,000 cells | 85,000 cells | 85,000 cells |
| Speed Grade | 2 | 2 | 2 | 1 | 1 |
| Temperature-Grade Suffix | ES | I | E | I | C |
| Debug Support | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight |
| Programmable Logic | Artix-7 FPGA logic | Artix-7 FPGA logic | Artix-7 FPGA logic | Artix-7 FPGA logic | Artix-7 FPGA logic |
主要差異化特點
- Higher listed processing frequency than the -1 CLG484 alternative (對比XC7Z020-1CLG484I)
- Same -2 speed grade and CLG484 footprint as XC7Z020-2CLG484I (對比XC7Z020-2CLG484I)
- Pin-compatible grade selection within the XC7Z020 CLG484 family (對比XC7Z020-1CLG484C)
設計說明
Use AMD’s official Zynq-7000 package pinout files and the XC7Z020 data sheet to create the 484-CSPBGA footprint and assign all 484 balls. This is a 19 mm by 19 mm package, so the design requires multilayer escape routing, short power connections, and controlled-impedance signal paths. Do not infer ball functions from a CLG400 device or from another CLG484 speed grade without checking the exact package file. Verify connector locations, assembly clearances, and via strategy against the PCB fabricator’s BGA design rules before release.
Implement the complete power architecture from the manufacturer data sheet, including separate supplies, sequencing requirements, voltage tolerances, decoupling, and configuration-power behavior. Place required bulk and high-frequency decoupling capacitors directly at the relevant package balls and provide low-impedance planes between layers. For a mixed processing-system and FPGA design, estimate worst-case demand from processor activity, fabric utilization, I/O loading, and configuration state rather than relying on a single typical-power figure. Confirm startup, shutdown, brownout, and power-cycling behavior in hardware.
Evaluate junction temperature for the selected XC7Z020-2CLG484CES using the manufacturer power and thermal data, board construction, copper area, airflow, and the highest expected ambient temperature. The dense 484-CSPBGA package can concentrate heat in the center of the device, making package thermal design more important than perimeter airflow alone. Use thermal vias or other package-specific copper features only in accordance with AMD’s land-pattern guidance. Validate the final assembly with thermal simulation and temperature measurement across worst-case operating modes.
Do not treat a same-package suffix change as automatically interchangeable without reviewing speed grade, temperature grade, device identification, configuration compatibility, and operating constraints. XC7Z020-2CLG484I and XC7Z020-2CLG484E preserve the listed 766 MHz speed, but their grade codes differ; XC7Z020-1CLG484I retains the CLG484 footprint while listing 667 MHz. Re-run synthesis and static timing analysis, rebuild the bitstream, repeat hardware validation, and confirm programming or security configuration compatibility before production substitution.
合規資訊
Compliance status was not established by the manufacturer documentation identified for this device. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification requirements directly with AMD for the exact ordering suffix.