XC9536XL-7VQG64C - 36-Macrocell 3.3V CPLD | AMD
MPN: XC9536XL-7VQG64C ✓ 啟用中XC9536XL-7VQG64C 概覽
A CPLD, or complex programmable logic device, is a programmable semiconductor that combines nonvolatile configuration memory, logic macrocells, and programmable I/O blocks. The XC9500XL family combines that architecture with in-system programming and IEEE Std 1149.1 JTAG boundary scan. This places the device in the hierarchy of programmable logic devices, alongside FPGAs and PAL-type programmable devices, while retaining a comparatively simple architecture for compact control, interface, and glue-logic designs.
Key features include 36 macrocells, 36 user I/O, 800 usable gates, a 125 MHz maximum operating frequency, and 5 ns pin-to-pin logic delays as described for the family. In-system programming supports at least 10,000 program and erase cycles. JTAG boundary scan supports boundary testing, configuration debugging, and design iteration, while the 3.3 V supply range targets low-voltage communications and computing equipment.
The XC9536XL architecture drives macrocell outputs directly into programmable I/O blocks, allowing logic functions to be assigned to available package pins through the configuration file. The -7 speed designation identifies the device timing grade associated with the 7.5 ns maximum propagation-delay listing. This grade is appropriate when design timing closes below the rated limit with the selected system clock, external interface, and loading conditions.
Typical uses include interface bridging, control logic, state machines, bus decoding, peripheral control, and compact communications equipment. The 36 available I/O make it particularly useful for designs that need moderate parallel connectivity without the resource count and configuration complexity of a larger FPGA. JTAG also makes the device convenient for production programming, board validation, and field debugging.
Designers should preserve the CPLD supply decoupling, route programming and JTAG signals carefully, and verify every external pin against the exact 64-pin package drawing. Although its nominal supply is 3.3 V, XC9536XL is not automatically interchangeable with a 5 V XC9536 design because the original family used 5 V I/O, while XC9500XL targets 3.3 V operation.
This page combines the manufacturer device characteristics with practical programming, replacement, routing, and compatibility guidance. It also distinguishes speed-grade alternatives that preserve the 36-macrocell, 36-I/O architecture while changing timing or temperature qualification.
直接替換替代品,適用於 XC9536XL-7VQG64C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC9536XL-7VQG64C (相同外形與佔位) — 差異在於 Package, Usable Gates, Device Type, Lead-Free Status, Number of Macrocells.
XC9536XL-5VQG64C
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC9536XL-10VQG64C
✅ 直接替換📋 參考替代品(不在目錄中)
XC9536XL-7VQG64I
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC9536XL-5VQG64I
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC9536XL-10VQG64I
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC9536XL-7VQG64C 最大額定值與電氣特性
| Device Type | Complex Programmable Logic Device (CPLD) |
| Product Family | FastFLASH XC9500XL |
| Number of Macrocells | 36 |
| Number of User I/O | 36 |
| Usable Gates | 800 |
| Maximum Operating Frequency | 125 MHz |
| Maximum Pin-to-Pin Propagation Delay | 7.5 ns |
| Family Pin-to-Pin Logic Delay | 5 ns |
| Internal Supply Voltage Range | 3 V to 3.6 V |
| Programmable Type | In-System Programmable |
| Minimum Program and Erase Cycles | 10,000 cycles |
| Boundary Scan | IEEE Std 1149.1 JTAG |
| Process Technology | 0.35 µm CMOS |
| 封裝 | 64-pin VTQFP, 10 mm x 10 mm |
| 安裝類型 | Surface Mount |
| Commercial Operating Temperature | 0 °C to +70 °C |
| Lead-Free Status | Lead Free |
| RoHS 狀態 | RoHS Compliant |
XC9536XL-7VQG64C 64-pin vtqfp, 10 mm x 10 mm 腳位配置指南
XC9536XL-7VQG64C(64-pin vtqfp, 10 mm x 10 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC9536XL-7VQG64C.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC9536XL-7VQG64C 適用於 6 應用s: Interface Bridging, Peripheral Control and State Machines, Communications Equipment, Industrial Control Logic, Bus Decoding and Address Mapping, Embedded System Glue Logic.
Interface Bridging
The XC9536XL-7VQG64C fits interface bridging because it combines 36 macrocells, 36 user I/O, and a 125 MHz family operating frequency in a 64-pin VTQFP package. Logic can translate or adapt parallel interface signals while the 7.5 ns propagation-delay grade provides timing margin for moderate-speed control paths. The device also supports JTAG boundary scan, allowing the assembled bridge to be inspected for opens, shorts, and incorrect logic states. Use the manufacturer's pin-description table to assign the bridged signals and verify the timing of both source and destination interfaces before committing the configuration.
推薦
Peripheral Control and State Machines
The XC9536XL-7VQG64C is suitable for peripheral control and state-machine implementations where compact logic and moderate I/O density matter. Thirty-six macrocells can divide into parallel state, decode, and output-control functions, while 36 user I/O support chip-select generation, status sequencing, and handshake signals. Its 7.5 ns timing grade and 125 MHz family frequency accommodate many control-oriented clock domains. In-system programming permits the control logic to be updated during board bring-up, and JTAG boundary scan helps verify that peripheral enables and state transitions behave as intended before full functional testing.
推薦
Communications Equipment
The XC9536XL-7VQG64C supports compact communications equipment requiring low-voltage programmable logic, local protocol handling, and configuration support. The 3 V to 3.6 V internal supply range matches the low-voltage environment targeted by the FastFLASH XC9500XL family, while 36 I/O provide connections for data, control, and status signals. At 125 MHz family frequency and a 7.5 ns maximum pin-to-pin delay, it is appropriate for moderate-speed interface logic rather than demanding high-speed serial PHY functions. JTAG boundary scan is particularly useful for production test and firmware-to-hardware integration checks.
推薦
Industrial Control Logic
The XC9536XL-7VQG64C can implement compact industrial control, sequencing, and signal-conditioning logic where 36 I/O and a 64-pin surface-mount package are sufficient. The device's nonvolatile in-system programmability supports repeatable configuration and production programming, while JTAG boundary scan assists board-level fault isolation. Its 7.5 ns timing class should be checked against the slowest control path rather than inferred solely from the 125 MHz family frequency. For installations with wider temperature requirements, the industrial-grade XC9536XL-7VQG64I provides the same core resource and package arrangement for qualification review.
推薦
Bus Decoding and Address Mapping
The XC9536XL-7VQG64C is appropriate for bus decoding, address mapping, and chip-select generation because 36 macrocells provide dedicated logic capacity for parallel decode trees and control outputs. Its 36 user I/O can accommodate address lines, enables, and status signals in a compact 64-pin VTQFP footprint. The 7.5 ns timing class supports many moderate-speed memory-mapped control paths, but designers must include setup time, skew, and external-device delay in the timing budget. Boundary scan can then verify address outputs and enable pins on a manufactured board before the complete system test.
推薦
Embedded System Glue Logic
The XC9536XL-7VQG64C works well as embedded system glue logic between processors, memories, converters, and peripheral devices. Its 36 macrocells can implement arbitration, reset distribution, watchdog handling, interrupt routing, and configuration logic without introducing the resource overhead of a larger FPGA. The 3.3 V supply class and 36 configurable I/O support compact mixed-signal system boards, while in-system programming simplifies prototype updates. JTAG boundary scan provides an additional board-level test mechanism, helping isolate solder, routing, and configuration faults before final functional validation.
推薦
推薦產品摘要
工程參考資料,適用於 XC9536XL-7VQG64C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC9536XL-5VQG64C | XC9536XL-10VQG64C | XC9536XL-7VQG64I | XC9536XL-5VQG64I | XC9536XL-10VQG64I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 64-pin VTQFP (10 mm x 10 mm) | 64-pin VTQFP (10 mm x 10 mm) | 64-pin VTQFP (10 mm x 10 mm) | 64-pin VTQFP (10 mm x 10 mm) | 64-pin VTQFP (10 mm x 10 mm) | 64-pin VTQFP (10 mm x 10 mm) |
| Macrocells | 36 | 36 | 36 | 36 | 36 | 36 |
| User I/O | 36 | 36 | 36 | 36 | 36 | 36 |
| Usable Gates | 800 | 800 | 800 | 800 | 800 | 800 |
| Internal Supply Range | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V |
| Pin-to-Pin Delay Class | 7.5 ns | 5 ns | 10 ns | 7.5 ns | 5 ns | 10 ns |
| Maximum Operating Frequency | 125 MHz | 125 MHz | 125 MHz | 125 MHz | 125 MHz | 125 MHz |
| Temperature Qualification | Commercial grade | Commercial grade | Commercial grade | Industrial grade | Industrial grade | Industrial grade |
| Programming and Debug | In-system programming and IEEE Std 1149.1 JTAG | In-system programming and IEEE Std 1149.1 JTAG | In-system programming and IEEE Std 1149.1 JTAG | In-system programming and IEEE Std 1149.1 JTAG | In-system programming and IEEE Std 1149.1 JTAG | In-system programming and IEEE Std 1149.1 JTAG |
主要差異化特點
- Balanced speed grade for moderate timing margin (對比XC9536XL-10VQG64C)
- Same package and resources as the faster grade (對比XC9536XL-5VQG64C)
- Commercial-temperature sourcing option (對比XC9536XL-7VQG64I)
設計說明
Assign nets from the exact 64-pin VTQFP pin-description table in the AMD DS058 datasheet. The package contains 36 user I/O plus power, ground, configuration, and JTAG contacts, so counting only I/O leads can shift every board numbering position. Preserve the exposed-pad or thermal-via pattern shown for the package and confirm land geometry against the current package drawing before releasing artwork.
Keep the JTAG clock, data, and mode-select nets short and route them away from high-current switching nodes. Use a stable configuration clock source and observe the setup and hold requirements from the programming section of the manufacturer datasheet. If a low-cost two-wire interface or long cable is used, include the appropriate series damping and verify signal levels at the device pins rather than only at the adapter.
Do not treat XC9536XL as a drop-in 5 V replacement for the original XC9536. The XL family is specified for a 3 V to 3.6 V internal supply, so migrating a 5 V board also requires checking external I/O levels, pull-ups, downstream device tolerances, and any level-shifting components. Confirm that the configuration file and pin assignments remain valid before treating the migration as production-ready.
Place the required supply-decoupling network directly beside the device's power and ground connections, with the shortest practical return path to the ground plane. Follow the datasheet's recommended capacitor values and layout sequence rather than general bulk-capacitor guidance. If an external 5 V source remains in the system, treat it as a separate rail and do not allow its logic level to exceed the XC9536XL interface limits.
Estimated: with a 10 mm x 10 mm VTQFP package, board copper and surrounding airflow can materially affect junction temperature, but no verified thermal-resistance figure was available for this order code. Validate the final design using the package thermal data and the highest expected ambient temperature. Provide uninterrupted ground-plane copper beneath the device and avoid placing it next to a heat source without a thermal-path review.
合規資訊
The device is identified as RoHS compliant and lead free. REACH, halogen-free, conflict-minerals, and automotive qualification information were not established for this order code.