XCKU040-2FFVA1156E - Kintex UltraScale FPGA | AMD
MPN: XCKU040-2FFVA1156E ✓ 啟用中XCKU040-2FFVA1156E 概覽
A field-programmable gate array is a semiconductor device whose digital logic, memory, and processing blocks are configured after manufacture. An FPGA belongs to the broader programmable-logic hierarchy, combining configurable logic blocks, fixed hard processors, memory, input/output resources, clock management, and high-speed serial transceivers on one package. This integration allows complex digital systems to be implemented on a single device rather than across numerous discrete components.
The XCKU040 device provides 530,250 system logic cells, approximately 21,606 Kb of block RAM, 1,920 DSP slices, and operation identified at up to 725 MHz. Its 520-I/O configuration supports substantial connectivity for parallel buses, control logic, memory interfaces, and high-speed peripherals. The manufacturer describes Kintex UltraScale as combining high signal-processing bandwidth with a price/performance balance intended for mid-range FPGA applications.
The FFVA1156 package supports high-density interconnect demands through a large 1156-ball flip-chip BGA and 35 × 35 mm body. Its XCKU040 designation identifies the Kintex UltraScale family, while the -2 suffix identifies the device speed grade. The E suffix is retained in the complete ordering code, and board-level designs must follow the package-specific pinout, power, decoupling, and configuration guidance in the AMD documentation.
Typical applications include wireless and wired communications infrastructure, high-speed signal processing, industrial imaging, test and measurement, accelerator boards, and high-throughput data acquisition. The large programmable-logic and DSP resources suit parallel pipelines, digital filtering, waveform generation, interface conversion, and protocol processing where fixed-function devices would offer insufficient design flexibility.
The principal design constraint is power delivery. A 20 nm Kintex UltraScale FPGA can demand multiple power rails and substantial transient current, so the PCB must use the manufacturer-recommended power architecture, high-quality decoupling, and thermal-management strategy. Configuration storage, clocking, memory interfaces, transceiver reference clocks, and high-speed routing also require careful planning before schematic capture.
This page combines the exact orderable device information, package characteristics, sourcing paths, technical alternatives, and implementation guidance needed during FPGA selection and PCB planning. For a new design, engineers should use the official package files and current device documentation to confirm every ball assignment, supply rail, configuration signal, and layout constraint.
直接替換替代品,適用於 XCKU040-2FFVA1156E — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XCKU040-2FFVA1156E (相同外形與佔位) — 差異在於 Speed Grade, Device Type, Package, Logic Cells, Package Type.
XCKU040-1FFVA1156C
✅ 直接替換聯絡詢價
查看資料表 →XCKU040-1FFVA1156I
✅ 直接替換聯絡詢價
查看資料表 →XCKU040-3FFVA1156E
✅ 直接替換聯絡詢價
查看資料表 →XCKU040-2FFVA1156C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XCKU040-2FFVA1156I
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XCKU040-2FFVA1156E 最大額定值與電氣特性
| Device Type | Kintex UltraScale field-programmable gate array |
| FPGA Process Technology | 20 nm |
| System Logic Cells | 530,250 cells |
| User I/O | 520 I/O |
| Block RAM | 21,606 Kb |
| DSP Slices | 1,920 slices |
| Maximum Stated Clock Frequency | 725 MHz |
| Speed Grade | -2 |
| Core Voltage Range | 0.922 V to 0.979 V |
| 封裝 | 1156-FCBGA (FFVA1156) |
| Package Dimensions | 35 × 35 mm |
| 安裝類型 | Surface Mount |
| Clock and PLL Resources | MMCM and PLL |
| Junction Temperature Range | 0 °C to 100 °C |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
XCKU040-2FFVA1156E 35 × 35 mm 腳位配置指南
XCKU040-2FFVA1156E(35 × 35 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XCKU040-2FFVA1156E.
請參閱 資料表 以查看完整腳位配置。
典型應用
XCKU040-2FFVA1156E 適用於 6 應用s: High-Speed Communications Infrastructure, Industrial Imaging and Machine Vision, Digital Signal Processing Accelerator, Test and Measurement Equipment, Aerospace and Defense Control Systems, High-Bandwidth Data Acquisition.
High-Speed Communications Infrastructure
The XCKU040-2FFVA1156E fits communications infrastructure requiring substantial parallel logic, programmable I/O, and DSP resources in one device. Its 530,250 logic cells can support protocol engines, packet processing, and interface control, while 1,920 DSP slices accelerate filtering and transform operations. The 520-I/O FFVA1156 package provides extensive connectivity, although system clock and transceiver implementations remain application-specific. A design team would normally partition fixed interfaces into hard blocks and implement product-specific datapaths in programmable logic. The -2 speed grade provides a defined timing target for critical synchronous paths, and AMD's 725 MHz device identification indicates the performance class available to designers.
推薦
Industrial Imaging and Machine Vision
The XCKU040-2FFVA1156E is suitable for industrial imaging systems that combine sensor capture, preprocessing, feature extraction, and control in one programmable platform. Its 1,920 DSP slices can support parallel filtering and arithmetic, while 530,250 logic cells provide the flexibility needed for sensor-format adapters and image-pipeline control. The 520 I/O allow multiple data buses and synchronization signals to be connected without requiring extensive off-chip logic. For factory deployment, engineers should match the chosen temperature-grade suffix to the enclosure conditions and validate thermal performance at the board level. Design partitioning and camera-interface timing must be completed in Vivado before the 1156-FCBGA layout is released.
推薦
Digital Signal Processing Accelerator
The XCKU040-2FFVA1156E provides a practical platform for fixed-point and parallel floating-point accelerator designs because 1,920 DSP slices can execute multiply-accumulate operations concurrently. The large 530,250-cell logic fabric supports data movement, control, buffering, and multiple processing pipelines around the DSP columns. A system architect can map filtering, correlation, or transform operations into Vivado and use the 520 available I/O for high-throughput data interfaces. Practical performance depends on memory bandwidth, clocking, and pipeline latency rather than DSP count alone, so external memory planning and timing closure are essential. The -2 grade is useful when a defined higher-grade timing target is necessary for clock-rate planning.
推薦
Test and Measurement Equipment
The XCKU040-2FFVA1156E fits high-channel-count test, measurement, and signal-generation equipment where deterministic logic, parallel acquisition, and sophisticated waveform processing are required. Its 520 I/O can support multiple converters, triggers, status signals, and communication interfaces, while the programmable fabric allows instrument-specific sequencing and analysis. The 21,606 Kb block RAM figure provides on-chip storage for buffering, while 1,920 DSP slices support filters and transforms. Engineers should design the clock distribution carefully because measurement accuracy depends on low-jitter references, controlled clocking, and deterministic I/O timing. Package escape routing and power sequencing must follow the current AMD implementation guidance.
推薦
Aerospace and Defense Control Systems
The XCKU040-2FFVA1156E can support modular aerospace, defense, and industrial-control architectures that require configurable logic and extensive I/O without using multiple programmable devices. The 530,250-cell fabric accommodates protocol bridges, control laws, redundancy management, and telemetry processing, while the DSP array supports signal conditioning. Qualification for an individual program is not implied by the device family: engineers must evaluate radiation, temperature, longevity, and availability requirements against the exact ordering code and program specifications. The -2 speed grade and E suffix form part of that qualification review. Configuration should use protected or otherwise qualified storage according to the system safety and security requirements.
推薦
High-Bandwidth Data Acquisition
The XCKU040-2FFVA1156E is appropriate for high-bandwidth data-acquisition systems requiring simultaneous parallel data capture, real-time processing, and flexible control. Its 520 I/O create numerous lanes for converters, memory interfaces, and synchronization, while the DSP resources can perform filtering and decimation close to the acquisition front end. The 21,606 Kb block RAM figure supports local buffering, but sustained throughput may require external memory and careful bank-level planning. Engineers should use Vivado timing analysis to establish achievable sample rates and verify pin-bank constraints before layout. Power integrity is equally important because the 20 nm Kintex UltraScale architecture requires a carefully designed multi-rail distribution network.
推薦
推薦產品摘要
工程參考資料,適用於 XCKU040-2FFVA1156E — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XCKU040-1FFVA1156C | XCKU040-1FFVA1156I | XCKU040-3FFVA1156E | XCKU040-2FFVA1156C | XCKU040-2FFVA1156I |
|---|---|---|---|---|---|---|
| Device | XCKU040 Kintex UltraScale FPGA | XCKU040 Kintex UltraScale FPGA | XCKU040 Kintex UltraScale FPGA | XCKU040 Kintex UltraScale FPGA | XCKU040 Kintex UltraScale FPGA | XCKU040 Kintex UltraScale FPGA |
| Package | 1156-FCBGA (FFVA1156) | 1156-FCBGA (FFVA1156) - same | 1156-FCBGA (FFVA1156) - same | 1156-FCBGA (FFVA1156) - same | 1156-FCBGA (FFVA1156) - same | 1156-FCBGA (FFVA1156) - same |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Speed Grade | -2 | -1 | -1 | -3 | -2 | -2 |
| Temperature-Grade Suffix | E | C | I | E | C | I |
| System Logic Cells | 530,250 cells | 530,250 cells | 530,250 cells | 530,250 cells | 530,250 cells | 530,250 cells |
| User I/O | 520 I/O | 520 I/O | 520 I/O | 520 I/O | 520 I/O | 520 I/O |
| Block RAM | 21,606 Kb | 21,606 Kb | 21,606 Kb | 21,606 Kb | 21,606 Kb | 21,606 Kb |
| DSP Slices | 1,920 slices | 1,920 slices | 1,920 slices | 1,920 slices | 1,920 slices | 1,920 slices |
主要差異化特點
- Targets the -2 performance grade within the XCKU040 family (對比XCKU040-1FFVA1156C)
- Retains the -2 grade with the E ordering suffix (對比XCKU040-2FFVA1156C)
- Combines 520 I/O with 1,920 DSP slices (對比XCKU040-1FFVA1156I)
設計說明
Implement the complete AMD-recommended power architecture for the XCKU040, including every required supply rail, sequencing order, voltage tolerance, and decoupling arrangement. Do not derive the power plan from generic FPGA assumptions. The 20 nm Kintex UltraScale device can create substantial dynamic current, so validate transient response at the die while adding local high-frequency decoupling and bulk capacitance according to the manufacturer's reference design.
Use the official FFVA1156 package files and UG575 to assign power, ground, configuration, clock, transceiver, and user-I/O balls. The package contains 1,156 positions, so manual or generic BGA mapping is unsafe. Perform escape-routing and layer-transition reviews with the selected stack-up, paying particular attention to clock inputs, configuration pins, and any high-speed transceiver signals before releasing the PCB.
Plan the board for worst-case utilization rather than a lightly loaded benchmark. Estimate total device dissipation from the final design, then verify junction temperature against the selected ordering code's environmental limits. Use the package thermal data and the current AMD power methodology, provide copper heat-spreading paths where practical, and account for airflow in enclosed systems. Validate with board-level thermal analysis before production release.
Do not treat another XCKU040 FFVA1156 suffix as an automatic functional equivalent. The -1, -2, and -3 portions are speed-grade identifiers, while the final C, E, or I suffix affects environmental ordering. Changing a suffix can alter timing, power, qualification, or availability. Re-run synthesis, implementation, timing analysis, thermal review, and tool-version checks after any order-code change.
合規資訊
The product records mention RoHS and REACH comparison fields, but no explicit compliance declaration was provided for this exact orderable device. AEC-Q100 is not applicable to this general-purpose FPGA classification.