XCKU11P-2FFVA1156E - Kintex UltraScale+ FPGA | AMD
MPN: XCKU11P-2FFVA1156E ✓ 啟用中XCKU11P-2FFVA1156E 概覽
A field-programmable gate array is a semiconductor whose digital functions are configured after manufacture. In the broader device hierarchy, an FPGA sits above basic logic ICs and below adaptable system-level processors. Kintex UltraScale+ devices are used when designers need substantially more parallelism and interface capability than discrete logic can provide while retaining the flexibility of programmable hardware.
The XCKU11P-2FFVA1156E provides 464 package I/O and a -2 performance grade. Its 1156-FCBGA construction supports dense high-speed designs requiring numerous power, ground, configuration, and general-purpose I/O connections. The operating range of 0.825 V to 0.876 V applies to the device core supply identified in the product information. Speed-grade, temperature, and package suffixes must be matched carefully during replacement planning.
The Kintex UltraScale+ architecture supports programmable logic and high-speed I/O in a device that can be reconfigured for multiple board-level functions. Its large pin count makes board planning, power delivery, and signal-integrity analysis central parts of the implementation process. Configuration storage, clocking, transceivers, and auxiliary power rails must be designed together before the FPGA is placed into production hardware.
Typical uses include network equipment, industrial automation, test and measurement, machine vision, high-speed data acquisition, communications infrastructure, and embedded signal processing. The large I/O count is especially useful for systems that combine parallel interfaces, high-speed transceivers, clock distribution, and multiple peripheral buses on one programmable device.
A critical implementation consideration is that the 1156-pin FCBGA footprint demands careful escape routing, layer transitions, via-in-pad or via-beyond-pad policy, and BGA-specific assembly capability. Use the official AMD package pinout files and the applicable product specification when assigning every ball and designing the power grid. Configuration and auxiliary rails require separate decoupling and sequencing checks.
This page organizes the confirmed package, I/O, voltage, and family information with drop-in candidate guidance, application-oriented design notes, and a parameter comparison. It also emphasizes the distinction between a package-compatible replacement and an electrically or lifecycle-equivalent upgrade, helping engineers evaluate an alternative before committing to a PCB or production BOM.
直接替換替代品,適用於 XCKU11P-2FFVA1156E — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XCKU11P-2FFVA1156E (相同外形與佔位) — 差異在於 Package, Speed Grade, Mounting Type, Device Type, Package Pin Count.
XCKU11P-2FFVA1156I
✅ 直接替換聯絡詢價
查看資料表 →XCKU11P-3FFVA1156E
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XCKU11P-1FFVA1156E
✅ 直接替換聯絡詢價
查看資料表 →XCKU11P-L2FFVA1156E
✅ 直接替換📋 參考替代品(不在目錄中)
XCKU11P-L1FFVA1156E
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XCKU11P-2FFVA1156E 最大額定值與電氣特性
| Device Type | Kintex UltraScale+ FPGA |
| Programmable I/O Count | 464 I/O |
| Core Supply Voltage Range | 0.825 V to 0.876 V |
| Speed Grade | -2 |
| 封裝 | 1156-FCBGA |
| Package Pin Count | 1156 pins |
| Package Dimensions | 35 x 35 mm |
| 安裝類型 | Surface Mount |
| RoHS 狀態 | Compliant |
| REACH Status | Compliant |
| DRC Conflict Status | Conflict Free |
XCKU11P-2FFVA1156E 35 x 35 mm 腳位配置指南
XCKU11P-2FFVA1156E(35 x 35 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XCKU11P-2FFVA1156E.
請參閱 資料表 以查看完整腳位配置。
典型應用
XCKU11P-2FFVA1156E 適用於 6 應用s: Industrial Automation and Control, Network Data Plane Equipment, High-Speed Test and Measurement, Machine Vision and Imaging, Industrial Communication Gateways, Aerospace and Defense Instrumentation.
Industrial Automation and Control
The AMD XCKU11P-2FFVA1156E fits industrial controllers that combine deterministic parallel I/O, programmable logic, communications, and machine-control timing in one FPGA. Its 464 I/O provide substantial connectivity for sensor inputs, actuator outputs, encoders, counters, and industrial buses, while the -2 grade supports timing-sensitive control functions. Place the device at the center of a partitioned controller architecture with isolated I/O, carefully filtered power rails, and deterministic clocking. The 1156-FCBGA package requires escape-routing space and a multilayer PCB, so the design must reserve layer transitions and compliant BGA assembly before the FPGA is finalized.
推薦
Network Data Plane Equipment
The XCKU11P-2FFVA1156E is appropriate for packet-processing and network-interface equipment that requires parallel fabric logic alongside programmable high-speed connectivity. Its 464 I/O allow substantial integration of packet buffers, control registers, status signals, and external memory interfaces on a single device. The -2 speed grade provides additional timing margin over a -1 implementation, which can be valuable in multi-clock designs. However, line-rate operation still depends on the selected transceiver resources, reference-clock architecture, board loss, and equalization. Use AMD's device constraints to partition clocks and I/O, and verify channel performance at system level rather than inferring it solely from the FPGA model number.
推薦
High-Speed Test and Measurement
The AMD XCKU11P-2FFVA1156E can serve as the central acquisition and processing element in sophisticated test equipment, waveform analyzers, and automated measurement systems. Its 464 I/O create opportunities for parallel ADC and DAC interfaces, trigger distribution, digital calibration paths, and communication with host processors. The -2 grade is useful where acquisition pipelines must meet tight timing closure across multiple clock domains. Engineers should separate analog inputs from digital routing, use controlled-impedance interfaces, and keep sensitive references away from switching power nodes. Power budgeting must include the activity factor of the acquisition logic because dynamic consumption can be materially higher than static configuration alone suggests.
推薦
Machine Vision and Imaging
The XCKU11P-2FFVA1156E is well suited to machine-vision controllers that must combine image acquisition, preprocessing, buffering, and real-time control. Its 464 I/O provide ample parallel connectivity for cameras, sensors, trigger signals, and actuator outputs, while the programmable architecture permits pipeline changes without a board respin. The -2 speed grade can improve timing margin in image-processing paths operating across multiple clock domains. Keep sensor data on short, impedance-controlled routes and isolate unrelated switching interfaces to reduce coupling. Because the device uses a 1156-FCBGA package, the board stack-up, thermal design, and assembly process should be planned together with the imaging architecture rather than added after circuit design is complete.
推薦
Industrial Communication Gateways
The XCKU11P-2FFVA1156E supports communication gateways that translate among industrial, automotive, and enterprise-facing interfaces while applying protocol conversion and local buffering. Its large I/O count permits parallel buses, status LEDs, controls, and multiple external memory or network interfaces to coexist on one programmable device. The -2 grade is appropriate for sustained gateway traffic, but the complete throughput budget must include available transceiver lanes, memory bandwidth, and protocol-engine latency. Keep legacy interfaces on separate I/O banks where possible and provide proper termination and isolation. Validate bit-error performance, clock-domain crossing, and recovery behavior across voltage and temperature limits before production release.
推薦
Aerospace and Defense Instrumentation
The XCKU11P-2FFVA1156E can support sophisticated instrumentation, telemetry processing, and embedded control when the selected ordering option satisfies the program's qualification and traceability requirements. Its 464 I/O and programmable logic allow multiple sensor channels, communication links, timing functions, and health-monitoring paths to be consolidated. The -2 grade can assist timing closure in telemetry and acquisition systems, but package temperature, radiation, screening, and procurement requirements must be confirmed for the exact suffix. Use controlled materials, review decoupling and power sequencing carefully, and build fault-tolerant configuration and recovery paths. Engineering and production reviews should confirm that every source and assembly requirement is fulfilled.
推薦
推薦產品摘要
工程參考資料,適用於 XCKU11P-2FFVA1156E — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XCKU11P-2FFVA1156I | XCKU11P-3FFVA1156E | XCKU11P-1FFVA1156E | XCKU11P-L2FFVA1156E | XCKU11P-L1FFVA1156E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 1156-FCBGA | 1156-FCBGA - same | 1156-FCBGA - same | 1156-FCBGA - same | 1156-FCBGA - same | 1156-FCBGA - same |
| Device Family | Kintex UltraScale+ FPGA | Kintex UltraScale+ FPGA | Kintex UltraScale+ FPGA | Kintex UltraScale+ FPGA | Kintex UltraScale+ FPGA | Kintex UltraScale+ FPGA |
| Speed Grade | -2 | -2 - same | -3 - one grade higher | -1 - one grade lower | -2 - same | -1 - one grade lower |
| Temperature Suffix | E | I - different temperature suffix | E - same suffix | E - same suffix | E with L option | E with L option |
主要差異化特點
- Closest suffix change preserves both speed grade and package (對比XCKU11P-2FFVA1156I)
- Higher performance grade remains package-compatible (對比XCKU11P-3FFVA1156E)
- Lower-grade option offers PCB reuse at reduced performance (對比XCKU11P-1FFVA1156E)
設計說明
Build the board around the official AMD FFVA1156 package data rather than a generic 1156-ball symbol. AMD's package archive provides TXT and CSV pin files, while UG575 explains the package organization. Cross-check ball assignments, power groups, configuration pins, and reserved positions against the exact XCKU11P device constraints. Escaping 1156 signal balls through a finite number of PCB layers requires a stack-up decision, and changing layer count later can invalidate escape-routing, impedance, and via-in-pad assumptions.
Separate the 0.825 V to 0.876 V core rail from auxiliary supplies and configure each rail with the voltage required by the selected design. Place bulk, high-frequency, and bypass capacitance at the locations prescribed by the AMD power guidelines, then connect each ball group through the package power grid with minimal plane breaks. Validate voltage sequencing, startup current, auxiliary-rail tolerances, and worst-case utilization in the power estimator. Do not treat the core-voltage range as the permitted tolerance for every FPGA power rail.
Estimate junction temperature from total core and auxiliary power, package thermal characteristics, PCB copper, airflow, and the selected speed grade. Higher utilization generally increases dynamic power, so a board that passes idle testing may fail during sustained processing. Keep the thermal model synchronized with the final stack-up, component population, enclosure, and airflow configuration. For high-performance -3 alternatives, repeat the thermal analysis because a higher speed grade can change both performance and power behavior.
Assign high-speed interfaces to appropriate I/O banks and preserve continuous reference planes beneath escape routes. Use the AMD transceiver and clocking guidance to control package loss, connector loss, return paths, and clock topology. Configuration signals also require deliberate attention because they affect boot reliability and remote recovery. Validate interfaces with the final stack-up and enclosure, and use source-synchronous relationships only when both data and clock paths have been constrained for the target signal rate.
合規資訊
The AMD component listing identifies the exact device as EU RoHS compliant, REACH compliant, and DRC Conflict Free. AEC-Q100 status is not applicable to this general-purpose Kintex UltraScale+ FPGA.