XMC1100Q024F0008ABXUMA1 - 32MHz Cortex-M0 MCU | Infineon
MPN: XMC1100Q024F0008ABXUMA1 ✓ 啟用中XMC1100Q024F0008ABXUMA1 概覽
A microcontroller integrates a processor core, nonvolatile program memory, volatile data memory, and peripherals into one semiconductor device. The XMC1100 belongs to the XMC1000 family of industrial ARM Cortex-M0 MCUs. This product type combines low-power embedded processing with serial communications, timing, and analog input capabilities, making it suitable for sensors, actuators, communications modules, and compact industrial controllers.
The principal specifications are a 32 MHz ARM Cortex-M0 core, 8 KB of flash memory, 16 KB of RAM, and operation across a 1.8 V to 5.5 V supply range. The device also provides mixed-signal acquisition resources, including a 12-bit ADC, together with I2C, LIN, SPI, UART, and USART interfaces. An internal 16 MHz oscillator supports clock generation without requiring an external crystal for suitable designs.
The XMC1100 architecture is intended for both event-driven and periodic control. Its peripheral set allows software to service communication interfaces while timers organize deterministic tasks and the ADC measures analog quantities. Alternate port-output functions can be assigned through the Pn_IOCR.PC register, providing flexible signal routing between general-purpose pins and peripheral outputs. The exact pin-level functions for this ordering code are defined in the Infineon datasheet pin table.
Typical uses include industrial sensor nodes, LIN-connected actuators, low-cost data acquisition modules, building automation controls, and compact communications equipment. The 12-bit ADC supports measurements of analog sensors, while the available serial interfaces simplify connection to external transceivers, displays, memories, and industrial peripherals. A 32 MHz Cortex-M0 core provides useful processing headroom without requiring a higher-cost application processor.
For PCB design, use the PG-VQFN-24-19 land pattern, connect the ground and supply pins according to the datasheet, and place decoupling capacitors close to their associated pins. Pay particular attention to exposed-pad connection and analog-ground routing when using the ADC. Firmware developers should also configure unused pins, validate peripheral pin multiplexing, and account for startup behavior before enabling external circuitry.
This product overview combines the Infineon ordering information, device parameters, interface details, practical application guidance, and drop-in alternatives into an engineering-focused reference. It also highlights the exact distinctions that matter when evaluating firmware compatibility, PCB reuse, memory capacity, and mixed-signal performance.
直接替換替代品,適用於 XMC1100Q024F0008ABXUMA1 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
XMC1100-Q024F0008-AB
✅ 直接替換📋 參考替代品(不在目錄中)
XMC1100Q024F0016ABXUMA1
✅ 直接替換📋 參考替代品(不在目錄中)
XMC1100Q024F0008ABXUMA1 最大額定值與電氣特性
| Product Type | 32-bit industrial microcontroller |
| Processor Core | ARM Cortex-M0 |
| CPU Clock | 32 MHz |
| Architecture | ARM 32-bit single-core |
| Flash Memory | 8 KB (8K x 8) |
| RAM Memory | 16 KB |
| Supply Voltage Range | 1.8 V to 5.5 V |
| 工作溫度範圍 | -40 °C to +85 °C |
| ADC Resolution | 12 bit |
| ADC Channel Count | 1 channel |
| Serial Interfaces | I2C, LIN, SPI, UART, USART |
| Internal Oscillator | 16 MHz |
| 封裝 | PG-VQFN-24-19 |
| 安裝類型 | Surface mount |
| RoHS 狀態 | Compliant |
| 最大時脈頻率 | 32 MHz |
| 腳位數 | 24 pins |
XMC1100Q024F0008ABXUMA1 pg-vqfn-24-19 腳位配置指南
XMC1100Q024F0008ABXUMA1(pg-vqfn-24-19 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XMC1100Q024F0008ABXUMA1.
請參閱 資料表 以查看完整腳位配置。
典型應用
XMC1100Q024F0008ABXUMA1 適用於 6 應用s: Industrial Sensor Nodes, LIN-Connected Actuator Controls, Compact Data Acquisition Modules, Building Automation Controllers, Battery-Powered Field Equipment, Communications Interface Modules.
Industrial Sensor Nodes
The XMC1100Q024F0008ABXUMA1 fits compact sensor nodes that periodically acquire analog measurements and transmit results over a serial link. Its 12-bit ADC supports analog sensing, while the 32 MHz ARM Cortex-M0 core provides sufficient control throughput for filtering, scaling, and status handling. The 8 KB flash limits application-code size, so compact drivers and runtime-efficient communication stacks are important. Its 1.8 V to 5.5 V operating range also permits integration with both low-voltage sensor circuits and conventional 3.3 V industrial electronics. Place the MCU close to the sensor interface and isolate analog routing from high-current switching paths.
推薦
LIN-Connected Actuator Controls
The XMC1100Q024F0008ABXUMA1 is appropriate for distributed actuator controllers because it combines a LIN interface with timers, GPIO, and a compact 24-pin package. Firmware can convert commands into time-based control actions, monitor feedback inputs, and report diagnostic states without a separate communications processor. The 32 MHz Cortex-M0 core handles interrupt-driven serial events while leaving capacity for application logic. Designers should confirm the exact LIN and timer pin multiplexing in the manufacturer pin table and validate timing against the applicable LIN network requirements. The 8 KB flash is suitable for focused control code but may require a separate memory strategy for large diagnostic or update features.
推薦
Compact Data Acquisition Modules
The XMC1100Q024F0008ABXUMA1 can serve as the control element in a compact mixed-signal acquisition module. Its 12-bit ADC handles sensor signals, and its I2C and SPI interfaces support external analog front ends, memories, or converters. The 16 KB RAM provides working space for buffering and state management, while the 8 KB flash constrains firmware features rather than runtime data volume. For best results, select external components whose address and timing requirements match the MCU's configured bus speed. Keep the analog ground return compact, isolate switching converters from ADC inputs, and follow the Infineon reference layout when the ADC is used near the device's operating limits.
推薦
Building Automation Controllers
The XMC1100Q024F0008ABXUMA1 is suitable for small building-automation nodes that coordinate sensors, relays, or communication transceivers. Its 32 MHz Cortex-M0 performance supports event handling and periodic scheduling, while UART, USART, I2C, SPI, and LIN provide options for local and network-oriented connectivity. The operating range of -40 °C to +85 °C supports industrial environments where the final equipment must tolerate extended temperatures. Firmware should include communication timeout handling and safe output states because the MCU may control loads through external drivers. Validate pin multiplexing, watchdog behavior, and power-state transitions against the complete Infineon documentation before production release.
推薦
Battery-Powered Field Equipment
The XMC1100Q024F0008ABXUMA1 can be used in low-duty-cycle field equipment where compactness and a 1.8 V minimum operating voltage are important. Its internal 16 MHz oscillator can support designs that do not require an external crystal, while sleep-mode behavior can reduce energy use when the final firmware allows the processor to idle between measurements or communications. Low voltage alone does not guarantee low system power, so developers must evaluate the MCU's specified sleep currents, external sensor load, regulator efficiency, and serial transceiver consumption. Use the low-power GPIO paths for wake events and ensure external interface circuits do not prevent the supply from entering its intended operating state.
推薦
Communications Interface Modules
The XMC1100Q024F0008ABXUMA1 fits communication modules that need protocol handling, local control, and mixed-signal status inputs without a high-end processor. I2C and SPI can connect to sensors or radio-related circuits, while UART and USART support host links and external transceivers. Its 32 MHz Cortex-M0 core provides deterministic interrupt handling for framed communication, and the compact PG-VQFN-24-19 package supports dense module layouts. Because flash is limited to 8 KB, select compact protocol stacks and avoid loading the MCU with functions that belong in a companion device. Verify transceiver logic levels, bus timing, and the final module's thermal exposure before selecting the device for high-volume communications equipment.
推薦
推薦產品摘要
工程參考資料,適用於 XMC1100Q024F0008ABXUMA1 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XMC1100-Q024F0008-AB | XMC1100Q024F0016ABXUMA1 |
|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-VQFN-24-19 | VQFN-24 - same package family | PG-VQFN-24-19 - same |
| Processor Core | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 8 KB | 8 KB | 16 KB |
主要差異化特點
- Exact 8 KB-flash configuration (對比XMC1100Q024F0016ABXUMA1)
- 32 MHz ARM Cortex-M0 processing platform (對比XMC1100-Q024F0008-AB)
- Mixed-signal integration in a compact VQFN package (對比XMC1100Q024F0016ABXUMA1)
設計說明
Base the footprint on PG-VQFN-24-19 rather than a generic 24-pin QFN drawing. Confirm pad dimensions, exposed-pad geometry, solder-mask limits, and paste volume against the current Infineon package drawing. Place the exposed-pad thermal and electrical connection as specified, use a compact ground pour beneath the device, and follow the manufacturer's assembly guidance for exposed-pad soldering.
Keep analog inputs and their reference paths away from digital clock lines, relay drivers, inductors, and switching-regulator nodes. Use a continuous ground plane where practical, return analog ground through a controlled connection, and keep the ADC source impedance low enough for the selected sampling configuration. Confirm the required acquisition time and source impedance using the electrical characteristics in the manufacturer datasheet.
Place the required supply capacitors directly beside the corresponding VDD and ground pins, with the shortest practical return path. Do not assume that the 1.8 V to 5.5 V specification allows every peripheral or external circuit to operate throughout that range. Validate transceiver logic levels, ADC input limits, and brownout behavior against the final supply rail and operating conditions.
The target has 8 KB of flash, so an image created for the 16 KB XMC1100-Q024F0016 variant may exceed memory even when its runtime behavior fits. Check the linked image size, vector-table placement, bootloader partition, and firmware update limits before substitution. Also verify every multiplexed pin assignment because alternate peripheral outputs can change the behavior of an otherwise identical PCB.
Do not use the shortened XMC1100-Q024F0008-AB designation without checking its complete ordering code, temperature grade, package, and delivery format. A correct family name alone does not guarantee an interchangeable commercial ordering. Match the exact suffix requirements and confirm pin functions, electrical ratings, and qualification status before releasing a replacement into production.
合規資訊
RoHS compliance is identified for the exact ordering code. Additional environmental, halogen-free, automotive-qualification, and conflict-minerals declarations are not stated in the available product information.