Z8674312ASG - 8-Bit 12MHz 8KB OTP Microcontroller | Zilog
MPN： Z8674312ASG ✓ 啟用中Z8674312ASG 概覽
A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one device. The Z8 family provides a low-cost platform for appliance controls, industrial equipment, meters, and simple embedded systems. The Z8674312ASG uses OTP program memory, which allows firmware to be programmed once during manufacturing or after assembly but prevents normal field reprogramming. This makes the device suitable for products where a stable, fixed control program is preferred over application-update flexibility.
The Z8674312ASG combines an 8-bit processor core with 12MHz operation, 8KB of OTP program storage, and 236 bytes of RAM. The 44-LQFP package provides 44 external leads for connection to peripheral circuits, power, clocking, reset, and input/output functions. Its 3.5V to 5.5V supply range supports conventional embedded-control rails found in industrial and commercial equipment.
This part is identified as part of the Z86743 series and is categorized as an SMT CMOS Z8 OTP microcontroller. The commercial-temperature classification and square gull-wing QFP form factor make it appropriate for standard PCB assembly rather than a space-constrained leadless package. The package dimensions support routing through standard 10mm-by-10mm LQFP land patterns.
Typical uses include small industrial controllers, sensor-interface boards, motor-control support logic, measurement instruments, and appliance-control systems. Firmware development should account for the limited 236-byte RAM and the one-time nature of OTP memory. Application code should be tested thoroughly before programming because changes require replacement or a new programmed device.
A practical design consideration is the distinction between OTP program memory and reusable Flash memory. If a product requires field upgrades, remote reconfiguration, or frequent firmware revisions, an MCU with rewritable Flash memory may be a better functional fit. For fixed-production applications, the Z8674312ASG can provide a compact and straightforward implementation.
This page consolidates the confirmed Z8674312ASG identifiers, package information, memory characteristics, operating frequency, and design guidance while clearly separating confirmed specifications from details that require the manufacturer datasheet or a validated cross-reference record.
直接替換替代品，適用於 Z8674312ASG — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
Z8674311ASG
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
Z8674302ASG
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
Z8602ASG
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
Z8612ASG
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
Z8621ASG
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
Z8674312ASG 最大額定值與電氣特性
| Microcontroller Type | 8-bit Z8 OTP microcontroller |
| CPU Architecture | 8-bit |
| 最大時脈頻率 | 12MHz |
| Program Memory | 8KB OTP |
| Program Memory Organization | 8K x 8 |
| RAM | 236 bytes |
| Operating Voltage Range | 3.5V to 5.5V |
| Series | Z86743 |
| 封裝 | 44-LQFP (10mm x 10mm) |
| Package Type | LQFP-44 |
| Terminal Count | 44 pins |
| Terminal Form | Gull wing |
| 安裝類型 | SMT |
| Process Technology | CMOS |
| Temperature Grade | Commercial |
| Program Memory Type | One-time programmable |
| RoHS 狀態 | Compliant |
| Manufacturer | Zilog |
| Series Identification | Z8 |
Z8674312ASG lqfp-44 腳位配置指南
Z8674312ASG（lqfp-44 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： Z8674312ASG.
請參閱 資料表 以查看完整腳位配置。
典型應用
Z8674312ASG 適用於 6 應用s: Appliance Control, Industrial Interface Module, Measurement Instrument, Sensor Processing Board, Small Motor Support Controller, Fixed-Function Communication Endpoint.
Appliance Control
The Z8674312ASG fits appliance-control boards that require an 8-bit processor, 12MHz operating speed, and a fixed program rather than field-reprogrammable Flash. Its 8KB OTP program memory can hold the operating logic, while 236 bytes of RAM supports task state, timing variables, and short data buffers. The 3.5V-to-5.5V supply range aligns with common control-board rails. Because OTP cannot be rewritten after programming, firmware validation and manufacturing-programming procedures are especially important before volume production.
推薦
Industrial Interface Module
Z8674312ASG can serve as the supervisory controller in a compact industrial interface that translates switch, sensor, and relay signals into a higher-level system function. Its 12MHz 8-bit core is appropriate for deterministic supervisory logic, while the 236-byte RAM limits buffering and should be included in early memory planning. The 44-LQFP package exposes more I/O than a small leadless package and is practical for conventional through-hole-style PCB assembly. A 3.5V-to-5.5V input rail simplifies integration with legacy 5V control electronics.
推薦
Measurement Instrument
The Z8674312ASG is appropriate for a fixed-function measurement instrument that displays readings, controls front-panel inputs, and performs lightweight signal conditioning or unit conversion. The 8KB OTP area supports dedicated instrument firmware without field-update infrastructure, and the 12MHz clock provides sufficient throughput for modest control loops. Designers should evaluate the 236-byte RAM against display buffers, calibration data handling, and communications staging. The commercial-grade device is best aligned with indoor instruments rather than harsh automotive environments.
推薦
Sensor Processing Board
Z8674312ASG can process basic sensor inputs and convert them into control or communications output when the firmware does not require large buffers. The 8-bit architecture and 12MHz clock are suitable for sampling supervisory logic, threshold evaluation, debouncing, and status reporting. Its limited 236-byte RAM makes careful allocation necessary when handling packet assembly or time-series data. The 3.5V-to-5.5V operating range supports conventional regulated sensor-board power, while OTP suits products manufactured with stable, fixed behavior.
推薦
Small Motor Support Controller
The Z8674312ASG can implement auxiliary control, direction sequencing, limit-switch handling, and fault reporting around a larger motor-control subsystem. Its 12MHz operation is suitable for deterministic supervisory tasks, while the 8KB OTP program area can hold a production-fixed control sequence. The MCU should not be treated as the primary high-current motor driver; it is better used alongside a suitable driver interface. Its 3.5V-to-5.5V range helps simplify integration with conventional logic-level control circuits.
推薦
Fixed-Function Communication Endpoint
Z8674312ASG can act as a small protocol-conversion or command-routing endpoint when the required message set is modest and firmware can be fixed at production. The 12MHz 8-bit core handles byte-oriented framing, checks, and state-machine tasks, while 236 bytes of RAM limits simultaneous buffering. Designers should size message storage carefully and use external interface components when speed or packet volume exceeds the internal resources. OTP memory is advantageous when security or configuration consistency is prioritized over field upgrades.
推薦
推薦產品摘要
工程參考資料，適用於 Z8674312ASG — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Package | 44-LQFP (10mm x 10mm) |
| Brand | Zilog |
| CPU Architecture | 8-bit |
| Maximum Clock Frequency | 12MHz |
| Program Memory | 8KB OTP |
| RAM | 236 bytes |
| Operating Voltage | 3.5V to 5.5V |
| Program Memory Type | One-time programmable |
| Temperature Grade | Commercial |
主要差異化特點
- Purpose-built 8-bit Z8 control platform (對比Generic Flash-memory 8-bit MCU)
- 12MHz operating point for compact embedded control (對比Low-speed 8-bit MCU)
- 44-LQFP implementation with 236-byte RAM (對比Small leadless 8-bit MCU)
設計說明
Use the manufacturer’s 44-LQFP land pattern rather than a generic 44-pin QFP footprint. Confirm pad length, exposed-pad treatment, pin-1 orientation, and courtyard dimensions against the official package drawing. Place the decoupling capacitors close to the supply and ground pins, and route high-current or switching-node copper away from sensitive input traces.
Treat OTP programming as a one-time manufacturing step. Complete code review, boundary testing, and programming-file verification before committing the device to a production board. A defective OTP image cannot be corrected by ordinary firmware download, so maintain controlled firmware revision records and test programmed samples before full volume release.
Design the power rail for the confirmed 3.5V-to-5.5V operating range and check timing behavior at the maximum 12MHz clock frequency. Use local supply bypassing and provide clean reset behavior. If the board combines the Z8674312ASG with motors, relays, or switching converters, separate noisy power paths and keep switching-node return currents out of the microcontroller ground path.
Assign oscillator, reset, and programming-related traces according to the manufacturer reference layout. Avoid routing high-current inductive or capacitive loads near the 12MHz clock network and sensitive input pins. Because the device is an 8-bit part with only 236 bytes of RAM, reserve debug or test access in the PCB design so firmware diagnosis remains possible after assembly.
合規資訊
RoHS compliance is indicated in the exact-part LCSC listing. The remaining compliance attributes require confirmation from the manufacturer or an authoritative compliance document.
