Z86E6316FSC - 8-Bit 16MHz 32KB OTP MCU | Zilog
MPN: Z86E6316FSC ✗ 停產Z86E6316FSC 概覽
An 8-bit microcontroller is a compact embedded-control IC that executes firmware from internal program memory and reads sensor, control, or communication signals through dedicated peripheral pins. In the broader semiconductor hierarchy, the Z86E6316FSC is a microcontroller, which is a type of embedded processor and semiconductor used for system-level control rather than general-purpose computing. Its 32KB OTP architecture makes it appropriate for firmware that must be programmed once and then operate without external program-memory components.
Key characteristics include an 8-bit processing core, 16MHz clock capability, 32KB OTP program memory, integrated UART, and a 44-QFP package. One-time-programmable memory supports permanent configuration or firmware storage, but it also means the application program cannot be updated in the field. The UART interface enables serial links to sensors, human-interface modules, data converters, or other embedded controllers while reducing the number of discrete communication components required on a board.
The 44-QFP package provides a conventional surface-mount footprint with leads on all four sides. Its pin arrangement, electrical limits, peripheral multiplexing, clock options, and programming procedure should be confirmed against the manufacturer datasheet before schematic capture or PCB routing. Because different members of the Z86 family may use different package suffixes, peripheral functions, and temperature grades, suffix-level compatibility must be checked rather than assumed from the Z8 family name.
Typical uses include serial-control terminals, appliance interfaces, industrial control modules, instrument panels, and embedded communication bridges. The 16MHz processing rate supports responsive polling and control loops, while the 32KB OTP region accommodates compact application firmware. UART-centered designs are particularly natural because serial communication is integrated into the controller instead of requiring a separate communications IC.
For new layouts, place decoupling capacitors at the supply pins, preserve the manufacturer's clock and reset guidance, and reserve programming or test access where required. Confirm signal levels, maximum input voltages, peripheral pin assignments, and exposed-pad or thermal requirements in the datasheet before releasing a production layout.
直接替換替代品,適用於 Z86E6316FSC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: Z86E6316FSC (相同外形與佔位) — 差異在於 Package, Serial Interface.
Z86E6316ASG
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →Z86E6316FSC 最大額定值與電氣特性
| Product Type | 8-bit microcontroller |
| Manufacturer | Zilog |
| Processor Architecture | Z8 8-bit |
| 最大時脈頻率 | 16 MHz |
| Program Memory | 32 KB OTP |
| Program Memory Organization | 32K x 8 bits |
| Serial Interface | UART |
| 封裝 | 44-pin QFP |
| 安裝類型 | Surface mount |
| 資料匯流排寬度 | 8 bit |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Z86E6316FSC 44-pin qfp 腳位配置指南
Z86E6316FSC(44-pin qfp 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: Z86E6316FSC.
請參閱 資料表 以查看完整腳位配置。
典型應用
Z86E6316FSC 適用於 6 應用s: Serial Control Terminal, Appliance Control Module, Industrial Sensor Interface, Instrument Front Panel, Communication Bridge, Compact Data Converter Control.
Serial Control Terminal
The Z86E6316FSC fits a dedicated serial terminal because its 16MHz Z8 core can service control logic while the integrated UART communicates with a host, display, or data-acquisition module. The 32KB OTP region can hold the terminal firmware, protocol handlers, and fixed configuration without requiring an external memory device. Place the MCU between the system connector and downstream circuitry, and confirm UART pin multiplexing and logic levels in the manufacturer datasheet. Because the program memory is one-time programmable, production firmware must be finalized before programming. The main design trade-off is lower field flexibility than flash memory in exchange for a compact, deterministic control solution.
推薦
Appliance Control Module
The Z86E6316FSC is appropriate for appliance control modules that combine local decision logic with serial communication to a main controller or accessory. Its 16MHz operating rate supports responsive input polling and state-machine execution, while 32KB of OTP stores compact firmware for motors, relays, indicators, and safety interlocks. The 44-QFP package is practical for automated assembly when the board does not require an extremely small footprint. Validate supply voltage, I/O limits, watchdog behavior, and peripheral assignments against the manufacturer datasheet. OTP is suitable when each appliance configuration is fixed during manufacturing, but it is not appropriate when end users must update control policies in the field.
推薦
Industrial Sensor Interface
The Z86E6316FSC can act as the controller for a compact industrial sensor interface that receives commands and reports measurements through a UART link. Its 8-bit architecture and 16MHz clock are well matched to supervisory tasks such as sensor selection, scaling, status tracking, and fault signaling. Thirty-two kilobytes of OTP provides room for a complete protocol handler and fixed calibration data. The design should include suitable power filtering and protection for external serial lines, with logic levels and connector electrical limits established from the device documentation. If the end user must change calibration or firmware repeatedly, select a flash-based controller with a larger memory and update mechanism.
推薦
Instrument Front Panel
The Z86E6316FSC supports an instrument front-panel controller by handling button states, indicator commands, and serial exchanges with a display or measurement engine. A 16MHz clock permits responsive human-interface response, and the 32KB OTP area can hold menus, status logic, and communication routines without external program storage. The 44-QFP footprint gives PCB designers access to four-sided lead access and conventional inspection. Carefully allocate pins after checking all alternate functions, since multiplexed peripherals can change the available I/O map. The fixed-memory architecture works well for a product whose interface behavior is determined at manufacture; it is less suitable for products requiring downloadable menus or field-configurable operating profiles.
推薦
Communication Bridge
推薦
Compact Data Converter Control
The Z86E6316FSC fits compact converter and data-acquisition modules where a local MCU must configure a peripheral, supervise operating status, and relay results through a serial interface. Its 32KB OTP program area can hold fixed command tables and control firmware, while the 8-bit architecture keeps the control path simple and efficient. At 16MHz, the processor can handle interrupts and routine status checks without occupying a more capable core. The design must respect the MCU supply range, I/O current limits, clock requirements, and package pin assignments from the manufacturer datasheet. OTP is advantageous for stable production configurations but should be avoided where calibration coefficients or firmware must be revised repeatedly in the field.
推薦
推薦產品摘要
工程參考資料,適用於 Z86E6316FSC — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | Z86E6316ASG |
|---|---|---|
| Brand | Zilog | Zilog |
| Package | 44-pin QFP | 44-pin QFP |
| Processor Architecture | 8-bit Z8 | 8-bit Z8 family |
| Program Memory | 32 KB OTP | 32 KB OTP family configuration |
| Serial Interface | UART | UART family configuration |
| Mounting Type | Surface mount | Surface mount |
主要差異化特點
- Integrated serial communications (對比Z86E6316ASG)
- One-time-programmable memory supports permanent product configuration (對比Z86E6316ASG)
- Compact leaded QFP assembly (對比Z86E6316ASG)
設計說明
Assign the PCB footprint directly from the Z86E6316FSC manufacturer package drawing and verify every pin against the datasheet pin table. The 44-QFP lead arrangement must match the exact suffix, including power, ground, programming, UART, and alternate-function assignments. Keep the ground layout continuous and place required decoupling capacitors close to their associated supply pins. Do not reuse a generic Z8 44-QFP footprint without a mechanical and pin-level comparison.
Confirm the supported supply range, absolute maximum voltage, and operating current from the manufacturer datasheet before connecting external signals. The 16MHz operating rate does not by itself define power consumption, so calculate the design requirement from the selected clock configuration and peripheral activity. Add supply filtering appropriate to the board environment and confirm that any external serial interface cannot inject voltages above the device's specified input limits.
One-time-programmable memory cannot be corrected by an ordinary firmware update. Establish the complete image, configuration data, checksum, and programming procedure before production. A programming failure may permanently damage the usable memory, so validate the programmer, programming voltage, timing, and board test fixture on representative devices. If the product requires field updates, select a flash-memory microcontroller instead of relying on an OTP migration path.
Treat the UART route as a potential noise source even though it is not a high-speed differential interface. Keep it away from switching-power nodes and sensitive analog inputs, provide a continuous ground reference, and follow the manufacturer's external-component recommendations. If the oscillator is used, reserve the required crystal or resonator and loading network according to the reference schematic. Review unused pins for required termination rather than assuming they can be left unconnected.
合規資訊
The available product listings do not provide a verified current environmental-compliance declaration for this exact suffix. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with Zilog before production release.