Z86E6316FSC - 8-Bit 16MHz 32KB OTP MCU | Zilog
Référence : Z86E6316FSC ✗ Fin de vieZ86E6316FSC Présentation
An 8-bit microcontroller is a compact embedded-control IC that executes firmware from internal program memory and reads sensor, control, or communication signals through dedicated peripheral pins. In the broader semiconductor hierarchy, the Z86E6316FSC is a microcontroller, which is a type of embedded processor and semiconductor used for system-level control rather than general-purpose computing. Its 32KB OTP architecture makes it appropriate for firmware that must be programmed once and then operate without external program-memory components.
Key characteristics include an 8-bit processing core, 16MHz clock capability, 32KB OTP program memory, integrated UART, and a 44-QFP package. One-time-programmable memory supports permanent configuration or firmware storage, but it also means the application program cannot be updated in the field. The UART interface enables serial links to sensors, human-interface modules, data converters, or other embedded controllers while reducing the number of discrete communication components required on a board.
The 44-QFP package provides a conventional surface-mount footprint with leads on all four sides. Its pin arrangement, electrical limits, peripheral multiplexing, clock options, and programming procedure should be confirmed against the manufacturer datasheet before schematic capture or PCB routing. Because different members of the Z86 family may use different package suffixes, peripheral functions, and temperature grades, suffix-level compatibility must be checked rather than assumed from the Z8 family name.
Typical uses include serial-control terminals, appliance interfaces, industrial control modules, instrument panels, and embedded communication bridges. The 16MHz processing rate supports responsive polling and control loops, while the 32KB OTP region accommodates compact application firmware. UART-centered designs are particularly natural because serial communication is integrated into the controller instead of requiring a separate communications IC.
For new layouts, place decoupling capacitors at the supply pins, preserve the manufacturer's clock and reset guidance, and reserve programming or test access where required. Confirm signal levels, maximum input voltages, peripheral pin assignments, and exposed-pad or thermal requirements in the datasheet before releasing a production layout.
Alternatives de remplacement direct pour Z86E6316FSC — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec Z86E6316FSC (même facteur de forme et même empreinte) — différant par Package, Serial Interface.
Z86E6316ASG
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →Z86E6316FSC Valeurs maximales et caractéristiques électriques
| Product Type | 8-bit microcontroller |
| Manufacturer | Zilog |
| Processor Architecture | Z8 8-bit |
| Fréquence d'horloge maximale | 16 MHz |
| Program Memory | 32 KB OTP |
| Program Memory Organization | 32K x 8 bits |
| Serial Interface | UART |
| Boîtier | 44-pin QFP |
| Type de montage | Surface mount |
| Largeur du bus de données | 8 bit |
| Statut RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Guide de configuration des broches du Z86E6316FSC 44-pin qfp
Configuration des broches du Z86E6316FSC (boîtier 44-pin qfp). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour Z86E6316FSC.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
Z86E6316FSC convient pour 6 applications: Serial Control Terminal, Appliance Control Module, Industrial Sensor Interface, Instrument Front Panel, Communication Bridge, Compact Data Converter Control.
Serial Control Terminal
The Z86E6316FSC fits a dedicated serial terminal because its 16MHz Z8 core can service control logic while the integrated UART communicates with a host, display, or data-acquisition module. The 32KB OTP region can hold the terminal firmware, protocol handlers, and fixed configuration without requiring an external memory device. Place the MCU between the system connector and downstream circuitry, and confirm UART pin multiplexing and logic levels in the manufacturer datasheet. Because the program memory is one-time programmable, production firmware must be finalized before programming. The main design trade-off is lower field flexibility than flash memory in exchange for a compact, deterministic control solution.
Recommandé
Appliance Control Module
The Z86E6316FSC is appropriate for appliance control modules that combine local decision logic with serial communication to a main controller or accessory. Its 16MHz operating rate supports responsive input polling and state-machine execution, while 32KB of OTP stores compact firmware for motors, relays, indicators, and safety interlocks. The 44-QFP package is practical for automated assembly when the board does not require an extremely small footprint. Validate supply voltage, I/O limits, watchdog behavior, and peripheral assignments against the manufacturer datasheet. OTP is suitable when each appliance configuration is fixed during manufacturing, but it is not appropriate when end users must update control policies in the field.
Recommandé
Industrial Sensor Interface
The Z86E6316FSC can act as the controller for a compact industrial sensor interface that receives commands and reports measurements through a UART link. Its 8-bit architecture and 16MHz clock are well matched to supervisory tasks such as sensor selection, scaling, status tracking, and fault signaling. Thirty-two kilobytes of OTP provides room for a complete protocol handler and fixed calibration data. The design should include suitable power filtering and protection for external serial lines, with logic levels and connector electrical limits established from the device documentation. If the end user must change calibration or firmware repeatedly, select a flash-based controller with a larger memory and update mechanism.
Recommandé
Instrument Front Panel
The Z86E6316FSC supports an instrument front-panel controller by handling button states, indicator commands, and serial exchanges with a display or measurement engine. A 16MHz clock permits responsive human-interface response, and the 32KB OTP area can hold menus, status logic, and communication routines without external program storage. The 44-QFP footprint gives PCB designers access to four-sided lead access and conventional inspection. Carefully allocate pins after checking all alternate functions, since multiplexed peripherals can change the available I/O map. The fixed-memory architecture works well for a product whose interface behavior is determined at manufacture; it is less suitable for products requiring downloadable menus or field-configurable operating profiles.
Recommandé
Communication Bridge
Recommandé
Compact Data Converter Control
The Z86E6316FSC fits compact converter and data-acquisition modules where a local MCU must configure a peripheral, supervise operating status, and relay results through a serial interface. Its 32KB OTP program area can hold fixed command tables and control firmware, while the 8-bit architecture keeps the control path simple and efficient. At 16MHz, the processor can handle interrupts and routine status checks without occupying a more capable core. The design must respect the MCU supply range, I/O current limits, clock requirements, and package pin assignments from the manufacturer datasheet. OTP is advantageous for stable production configurations but should be avoided where calibration coefficients or firmware must be revised repeatedly in the field.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour Z86E6316FSC — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | Z86E6316ASG |
|---|---|---|
| Brand | Zilog | Zilog |
| Package | 44-pin QFP | 44-pin QFP |
| Processor Architecture | 8-bit Z8 | 8-bit Z8 family |
| Program Memory | 32 KB OTP | 32 KB OTP family configuration |
| Serial Interface | UART | UART family configuration |
| Mounting Type | Surface mount | Surface mount |
Principaux différenciateurs
- Integrated serial communications (vs Z86E6316ASG)
- One-time-programmable memory supports permanent product configuration (vs Z86E6316ASG)
- Compact leaded QFP assembly (vs Z86E6316ASG)
Notes de conception
Assign the PCB footprint directly from the Z86E6316FSC manufacturer package drawing and verify every pin against the datasheet pin table. The 44-QFP lead arrangement must match the exact suffix, including power, ground, programming, UART, and alternate-function assignments. Keep the ground layout continuous and place required decoupling capacitors close to their associated supply pins. Do not reuse a generic Z8 44-QFP footprint without a mechanical and pin-level comparison.
Confirm the supported supply range, absolute maximum voltage, and operating current from the manufacturer datasheet before connecting external signals. The 16MHz operating rate does not by itself define power consumption, so calculate the design requirement from the selected clock configuration and peripheral activity. Add supply filtering appropriate to the board environment and confirm that any external serial interface cannot inject voltages above the device's specified input limits.
One-time-programmable memory cannot be corrected by an ordinary firmware update. Establish the complete image, configuration data, checksum, and programming procedure before production. A programming failure may permanently damage the usable memory, so validate the programmer, programming voltage, timing, and board test fixture on representative devices. If the product requires field updates, select a flash-memory microcontroller instead of relying on an OTP migration path.
Treat the UART route as a potential noise source even though it is not a high-speed differential interface. Keep it away from switching-power nodes and sensitive analog inputs, provide a continuous ground reference, and follow the manufacturer's external-component recommendations. If the oscillator is used, reserve the required crystal or resonator and loading network according to the reference schematic. Review unused pins for required termination rather than assuming they can be left unconnected.
Informations de conformité
The available product listings do not provide a verified current environmental-compliance declaration for this exact suffix. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with Zilog before production release.