集成电路

子分类

📁 ADC/DAC 2518 产品 📁 放大器IC 793 产品 📁 音频编解码器 16 产品 📁 音频IC 2 产品 📁 时钟与计时 287 产品 📁 DSP 962 产品 📁 数据采集IC 2 产品 📁 数字电位器 4 产品 📁 显示驱动与控制器 1 产品 📁 FPGA与CPLD 6666 产品 📁 接口IC 1568 产品 📁 LED驱动器 1 产品 📁 逻辑IC 305 产品 📁 存储IC 875 产品 📁 微控制器 18688 产品 📁 微处理器 4 产品 📁 电机驱动器 1 产品 📁 其他 1 产品 📁 Sensor and Detector Interfaces 1 产品 📁 专用IC 15 产品 📁 视频IC 13 产品

产品（32725)

SPC5605BK0CLL6 - 32-bit Auto MCU 768KB Flash 64MHz | NXP
SPC5605BK0CLL6

SPC5605BK0CLL6 - 32-bit Auto MCU 768KB Flash 64MHz | NXP

The NXP SPC5605BK0CLL6 is a 32-bit Power Architecture automotive microcontroller with an e200z0h core running up to 64 MHz, 768 KB of embedded Flash, and a 100-pin LQFP (14x14 mm) package designed for -40C to +85C operation. It belongs to the MPC56xx Qorivva family and targets automotive instrument cluster and gateway applications. The part is supplied in Tray packaging and is AEC-Q100 qualified for automotive use, with dual 3.3 V / 5 V I/O support. The Flash memory is organized as 768K x 8 and integrates the standard Qorivva peripheral set for body-electronics designs. A 32-bit automotive MCU is a microcontroller built around a 32-bit instruction set (here, Power Architecture technology) and qualified for the automotive temperature grade. In the system hierarchy, this places the SPC5605BK0CLL6 as a microcontroller -> embedded processor -> automotive semiconductor -> IC. The Qorivva MPC56xx family specifically addresses body-electronics, gateway, and instrument-cluster roles where deterministic interrupt latency and CAN/LIN connectivity matter more than raw MHz. Key differentiating features include the e200z0h core with VLE (variable-length encoding) APU for improved code density, an integrated FlexCAN module for CAN 2.0B communication, a 12-bit ADC, and enhanced motor-control timers. The device offers low-power run and stop modes suitable for always-on body controllers that must wake on CAN traffic. Compared with the higher-end SPC56xB/C/D variants, the SPC5605B family is the cost-optimized entry point while preserving the same peripheral IP. Technically, the SPC5605BK0CLL6 integrates 768 KB of Flash, up to 64 KB SRAM, and the standard Qorivva peripheral set. The 100-pin LQFP (14x14 mm) footprint provides ample GPIO for body-controller pin counts while remaining hand-solderable for prototype work. Power is supplied from a single 3.3 V or 5 V rail with on-chip voltage regulation for the core domain. Typical applications include automotive instrument clusters, central body controllers, gateway modules, and HVAC control units. The VLE APU and on-chip CAN make it a natural fit for LIN/CAN-based body networks. Design considerations include providing a 4.7 uF + 100 nF decoupling network near the supply pins, ensuring the RESET line is held low during power ramp, and verifying the JTAG/NPC pinout for production programming. This page synthesizes distributor pricing, drop-in Qorivva alternatives, and design notes not aggregated on any single manufacturer or distributor page.

USD $9.12 有现货
SPC5605BK0MLL6R - 32-bit 768KB Flash 64MHz MCU | NXP
SPC5605BK0MLL6R

SPC5605BK0MLL6R - 32-bit 768KB Flash 64MHz MCU | NXP

The NXP Semiconductors SPC5605BK0MLL6R is a 32-bit automotive microcontroller from the Qorivva MPC560xB family, built on a Power Architecture e200z0h core running at 64 MHz, with 768 KB of on-chip Flash memory, housed in a 100-pin LQFP (14x14 mm) surface-mount package rated from -40C to +125C for automotive-grade operation. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, program memory, data RAM, and a rich set of peripherals into one chip. MCUs sit at the lowest level of the embedded-computing hierarchy - below microprocessors and system-on-chip devices - and within the broader powertrain and body-electronics semiconductor category. Automotive MCUs like this one are qualified to operate across the harsh temperature, voltage, and EMC conditions found in vehicles. Key features include the 768 KB (768K x 8) Flash program memory, a 64 MHz e200z0h Power Architecture core, automotive-qualified AEC-grade operation from -40C to +125C, and flexible 3V to 5.5V supply operation. The device integrates CAN/FlexRay-oriented communication peripherals that make it suitable for in-vehicle networking nodes. The MPC560xB/C/D family represents NXP (formerly Freescale) integrated devices for automotive body electronics and industrial applications. The e200z0h core executes Power Architecture instructions, providing a mature tool ecosystem including NXP SPC5 Studio and third-party compilers. The 100-pin LQFP with 0.5 mm lead pitch offers a gull-wing, hand-solderable footprint that eases inspection and rework compared with BGA alternatives. Typical applications include automotive gateway modules, body control modules (BCM), lighting control, seat and door control units, HVAC controllers, and industrial nodes that require CAN/LIN connectivity with flash-rich firmware storage. For design, note that the 3V-5.5V supply range allows direct operation from automotive 5V rails, reducing the need for a dedicated 3.3V regulator; however, decoupling and EMC layout on the 100-pin LQFP must follow the manufacturer hardware design guidelines. This page synthesizes distributor pricing, drop-in alternatives within the SPC5605BK family, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-10-10.

USD $10.60 有现货
SPC5606BF1VLU6R - 32-Bit MCU, 1MB Flash, 64MHz, Automotive | NXP
SPC5606BF1VLU6R

SPC5606BF1VLU6R - 32-Bit MCU, 1MB Flash, 64MHz, Automotive | NXP

The NXP Semiconductors SPC5606BF1VLU6R is a 32-bit microcontroller from the MPC56xx Qorivva family, featuring an e200z0h Power Architecture core running at 64 MHz, 1 MB of on-chip Flash, and 80 KB SRAM, packaged in a 176-pin LQFP (24x24 mm). Designed for automotive body electronics and industrial applications, this MCU integrates peripherals for CAN, LIN, SPI, and timers while supporting an operating temperature range of -40 °C to +105 °C. An automotive-grade 32-bit MCU is a microcontroller engineered to meet the strict reliability, temperature, and EMC requirements of vehicle electronic systems. The MPC56xx Qorivva family sits within NXP's Power Architecture-based automotive portfolio, bridging the legacy Freescale MPC5500/5600 lines. Within the system hierarchy, the SPC5606B belongs to body-electronics controllers, an MCU class positioned between simple 8/16-bit body controllers and higher-performance chassis/powertrain MCUs, and is part of the broader category of embedded microcontrollers in automotive-grade electronics. Key features include an enhanced instruction set with Variable Length Encoding (VLE) for improved code density, hardware support for CAN 2.0B and LIN 2.1, an integrated interrupt controller, and on-chip debug. The 176-LQFP package supports both 5 V and 3.3 V I/O domains and provides ample GPIO for body and gateway applications. AEC-Q100 qualification makes it suitable for harsh underhood and cabin environments. The SPC5606B uses the e200z0h core, a cost-optimized Power Architecture vle-only implementation that delivers deterministic single-cycle execution for real-time body-control loops. With 1 MB Flash and 80 KB SRAM, designers can host AUTOSAR-style applications with moderate-sized calibration tables. The peripheral set includes FlexCAN, LINFlex, DSPI, eMIOS timers, and ADC channels, enabling direct sensor/actuator interfacing without external bridges. Typical applications include automotive body control modules (BCMs), gateway and CAN/LIN nodes, HVAC controllers, lighting modules, instrument clusters, and industrial PLCs. The combination of Power Architecture tooling, automotive qualification, and broad peripheral coverage makes it a workhorse for body-network ECUs. When designing with this device, ensure the operating voltage supply follows the 5 V ± 10 % NXP specification for VDD_HV and 3.3 V for VDD_LV domains. Decoupling and external ballast resistor sizing per the reference manual are critical for hot-plug reliability, and developers should use the SPC5Studio IDE for peripheral configuration. This page consolidates verified distributor pricing, drop-in compatible alternatives within the same LQFP-176 footprint, and design notes that go beyond the manufacturer datasheet for rapid sourcing and engineering evaluation.

USD $11.10 有现货
SPC5606BK0MLQ6 - 1MB Flash Automotive MCU | NXP | LQFP-144
SPC5606BK0MLQ6

SPC5606BK0MLQ6 - 1MB Flash Automotive MCU | NXP | LQFP-144

The NXP SPC5606BK0MLQ6 is a 32-bit automotive-grade microcontroller from the Qorivva MPC56xx family, featuring an e200z0h Power Architecture core running at 64 MHz, 1 MB of embedded Flash, and 96 KB of on-chip SRAM, packaged in a 144-pin LQFP (LQ package, 20x20 mm). The device is specified for the -40C to +125C automotive temperature range and integrates FlexCAN, LINFlex, SPI, and DSPI serial interfaces, plus a 12-bit ADC and a programmable eMIOS timer unit, addressing body-electronics and chassis applications. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit processor core, program and data memory, and a rich set of on-chip peripherals. Within the broader semiconductor taxonomy, an MCU is a member of the embedded processor class, which itself sits inside the larger microprocessor family. Automotive-grade MCUs such as the SPC5606BK0MLQ6 belong to the Power Architecture (PowerPC-book-E-derived) lineage and are positioned above 8/16-bit MCUs in performance, code density, and peripheral integration, while remaining below application processors in clock speed and memory. The e200z0h core is a variable-length encoding (VLE) superset of the original Power Architecture, allowing 16-bit and 32-bit instruction mix to optimize code density without sacrificing the 32-bit data path. The 1 MB Flash is organized as 1M x 8 and supports both program and EEPROM emulation, while the 96 KB SRAM is split into system RAM and auxiliary RAM for DMA-friendly buffering. The device also includes a 64-channel DMA controller, a 12-bit SAR ADC with up to 36 channels (depending on package), and a 4-channel FlexCAN module compliant with CAN 2.0B. Designed for automotive body-electronics modules, the SPC5606BK0MLQ6 is qualified per AEC-Q100 and supports operating voltages of 3.0 V to 5.5 V (3.3 V/5 V nominal). Its -40C to +125C operating range and integrated CAN/LIN communication make it suitable for in-vehicle networks, while the 144-pin LQFP package enables cost-effective PCB manufacturing with conventional SMT lines rather than requiring fine-pitch BGA assembly. Typical applications include body control modules (BCM), gateway ECUs, HVAC controllers, lighting modules, instrument clusters, and chassis-control ECUs where deterministic CAN communication and Flash/SRAM headroom for AUTOSAR-style stacks are required. The LQFP-144 footprint is also friendly to low-volume industrial control designs needing automotive-grade qualification. When laying out the PCB, ensure that VDDE_HV and VDDE_LV decoupling capacitors are placed within 5 mm of their respective pins, and that the analog VDDA rail is filtered with a ferrite bead or pi-filter to keep ADC SNR within the 12-bit budget. Use the OSCEXT pin to ground if the internal 16 MHz IRC is selected, and reserve a 4.7 kohm pull-up on the RESET pin to guarantee a clean cold-boot edge. This page synthesizes distributor pricing, same-family drop-in alternatives, application notes, and PCB-level design considerations not found in the manufacturer datasheet alone, giving procurement and embedded engineers a single consolidated reference for the SPC5606BK0MLQ6.

USD $9.35 有现货
SPC5606SF2CLU6 - 32-bit MCU, 1MB Flash, 64MHz, QFP-176 | NXP
SPC5606SF2CLU6

SPC5606SF2CLU6 - 32-bit MCU, 1MB Flash, 64MHz, QFP-176 | NXP

The NXP SPC5606SF2CLU6 is a 32-bit automotive-qualified microcontroller from the MPC560xS family, featuring a Power Architecture e200z0h core running up to 64 MHz, 1 MB of embedded Flash, and packaged in a 176-pin LQFP (24x24 mm). It is purpose-built for color thin-film transistor (TFT) display control in automotive instrument cluster and human-machine interface (HMI) applications where deterministic real-time response and a rich peripheral mix are required. An automotive microcontroller (MCU) is a microprocessor unit qualified to operate reliably in the harsh electrical, thermal, and vibration environment of a vehicle, integrating one or more CPU cores, non-volatile program memory (Flash), volatile working memory (SRAM), and a heterogeneous peripheral set on a single die. SPC5606SF2CLU6 sits in the wider NXP Power Architecture MCU hierarchy (PowerPC e200 -> Qorivva MPC56xx -> MPC560xS cluster family) and targets mid-range instrument clusters that balance cost, performance, and integrated graphics/display peripherals over general-purpose automotive MCUs such as the MPC5566. Key features include up to 64 MHz core frequency, 1 MB on-chip Flash program memory, an integrated TFT display controller (LCDC) and video DAC, enhanced modular I/O subsystem (eMIOS), multiple CAN 2.0B controllers (FlexCAN), SPI, I2C, UART/SCI, a 12-bit ADC and an enhanced queued analog-to-digital converter (eQADC) for precision sensor acquisition. The device integrates a stepper-motor driver interface for gauge movements and supports the SPC5Studio software ecosystem with AUTOSAR MCAL drivers, reference hardware platforms, and a hardware security module (HSE) for secure boot in production-grade deployments. The SPC5606SF2CLU6 is built on a 90-nm non-volatile memory (NVM) CMOS process with an on-chip voltage regulator (low-voltage detection, power-on reset, and standby modes). A PLL provides the system clock, while independent peripheral clocks can be gated for active-power management. Memory protection and error-correcting code support contribute to functional safety compliance under ISO 26262 up to ASIL-B for instrument-cluster applications. Typical applications are mid-range automotive instrument clusters with 5-inch to 7-inch TFT color panels, body control modules driving multiple stepper gauges, CAN-based gateway nodes, HVAC controllers with graphical displays, and aftermarket heads-up displays. The wide operating temperature range of -40C to +85C and AEC-Q100 qualification make it well-suited to cabin and engine-bay-adjacent locations. When designing with this MCU, ensure a 4.7uF or larger bulk decoupling capacitor is placed near each VDD/VSS pair and that the analog and digital grounds return to a single low-impedance ground plane. Crystal layout must follow the short-trace, guard-ring rules described in the NXP hardware design guide to keep the PLL within its jitter mask. Software engineers should select the documented oscillator frequency (40 MHz external crystal is recommended) and configure the PLL through the SPC5Studio clock tool rather than overriding registers manually.

USD $8.78 有现货
SPC5606SF2VLQ6 - 64MHz 1MB Flash Automotive MCU | NXP | 144-LQFP
SPC5606SF2VLQ6

SPC5606SF2VLQ6 - 64MHz 1MB Flash Automotive MCU | NXP | 144-LQFP

The NXP SPC5606SF2VLQ6 is a 32-bit Power Architecture microcontroller from the MPC560xS Qorivva family, featuring a 64 MHz e200z0h core, 1 MB of embedded Flash, 48 KB of SRAM, and housed in a 144-pin LQFP (20x20 mm) package. The part targets color thin-film transistor (TFT) automotive instrument cluster displays and is qualified to the -40C to +105C automotive temperature grade, with 105 general-purpose I/O pins and a 10-bit ADC. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The SPC5606SF2VLQ6 belongs to the power-architecture microcontroller sub-category, which descends into the broader automotive-qualified MCU family and ultimately the semiconductor taxonomy. Qorivva devices specifically address body, chassis, and instrument-cluster applications where deterministic real-time behavior and a long-life supply window are mandatory. Key features of this part include 1 MB on-chip Flash, 48 KB SRAM, an e200z0h single-issue 32-bit Power Architecture core running at 64 MHz, integrated TFT display controller peripherals, two 12-bit / one 10-bit ADC subsystem, multiple timers (eMIOS, PIT, STM), and NXP's low-power dynamic power-management scheme. The integrated display controller enables direct driving of TFT panels for instrument clusters without an external graphics controller, which reduces BOM cost and PCB area. Technically, the SPC5606SF2VLQ6 is built on a 90 nm automotive-qualified process and supports 3.3 V single-supply operation, JTAG and Nexus debug interfaces, CAN, LINFlex, SPI, and I2C communication peripherals. Compared with general-purpose ARM Cortex-M microcontrollers, the Power Architecture e200z0h core provides a more deterministic interrupt response time for real-time cluster workloads and longer software legacy migration paths within the MPC5xxx family. Typical applications include automotive instrument clusters with color TFT displays, head-up displays, body controllers with CAN/LIN nodes, HVAC control modules, and lighting/ECM modules. The -40C to +105C automotive temperature grade and AEC-Q100 qualification make it a primary choice for under-dash and behind-cluster electronics. When designing with this device, ensure proper decoupling on VDD/VSS pairs (typically 100 nF per pair plus bulk capacitance) and follow NXP application note AN2865 for oscillator layout. Confirm the device revision with NXP's product change notices before committing to long-life automotive programs because the Qorivva roadmap has shifted toward S32K and S32K1 ARM Cortex-M migration. This page synthesizes distributor pricing, same-family drop-in NXP alternatives, application notes, and design considerations not found in the manufacturer datasheet, giving automotive embedded engineers a faster basis of decision than distributor product pages alone.

USD $10.55 有现货
SPC5606SF2VLU6 - 32-bit Power Arch MCU, 1MB Flash, 64MHz | NXP
SPC5606SF2VLU6

SPC5606SF2VLU6 - 32-bit Power Arch MCU, 1MB Flash, 64MHz | NXP

The NXP Semiconductors SPC5606SF2VLU6 is a 32-bit automotive-grade microcontroller from the MPC560xS Qorivva family, featuring a Power Architecture e200z0h core running at 64 MHz, with 1 MB of embedded Flash and 48 KB of SRAM, housed in a 176-pin LQFP (24x24 mm) package. The device integrates 133 I/O pins, 16 channels of 10-bit ADC, and operates from a 3.0V to 5.5V supply across an automotive-grade -40C to +105C temperature range. It is qualified to AEC-Q100 standards, making it suitable for safety-critical automotive environments. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals such as ADCs, timers, communication interfaces (CAN, SPI, UART), and GPIO. Within the broader taxonomy, an MCU is a member of the embedded processor class, sitting below application processors but above simple digital signal controllers. The Power Architecture e200z0h core in the SPC5606SF2VLU6 targets deterministic real-time control with low interrupt latency, which is essential for chassis, body, and instrument cluster applications. Key features of the SPC5606SF2VLU6 include 1 MB of Flash program memory organized as 1M x 8, 48 KB of SRAM, 64 KB of EEPROM emulation, a 64 MHz maximum core frequency, 16 channels of 10-bit ADC, integrated timers, and a peripheral set designed for automotive cluster and TFT display driving. The 176-LQFP package provides ample pin count for parallel display interfaces, multiple CAN nodes, and LIN transceivers, while the automotive qualification supports ISO 26262-friendly system designs. The device uses an internal oscillator with PLL-based clock generation, supports low-power modes with dynamic peripheral gating, and provides comprehensive development and software support through NXP's ecosystem. Its Power Architecture core delivers deterministic execution ideal for real-time instrument cluster rendering and motor control feedback loops. Typical applications include color TFT automotive instrument clusters, body control modules (BCM), HVAC controllers, gateway ECUs, and industrial HMI panels. The wide operating voltage (3V-5.5V) and AEC-Q100 qualification allow direct connection to automotive 12V battery rails via standard regulators. When designing with this device, ensure the LQFP-176 PCB footprint is laid out to expose adequate thermal copper and route the parallel display bus with controlled impedance. Use NXP's S32 Design Studio or legacy CodeWarrior toolchains for firmware development, and follow the errata sheet for any silicon revision-specific workarounds. This page synthesizes distributor pricing from DigiKey, Mouser and Octopart, identifies drop-in NXP and competitor alternatives, and consolidates practical design notes that go beyond the manufacturer datasheet.

USD $11.10 有现货
SPC5607BF1VLU6 - 32-bit Qorivva MCU, 1.5MB Flash, 64MHz | NXP (Tape & Reel)
SPC5607BF1VLU6

SPC5607BF1VLU6 - 32-bit Qorivva MCU, 1.5MB Flash, 64MHz | NXP (Tape & Reel)

The NXP SPC5607BF1VLU6 is a 32-bit automotive-grade microcontroller based on the Power Architecture e200z0h core, delivering 64 MHz operation with 1.5 MB of on-chip Flash and 80 KB SRAM, housed in a 176-pin LQFP package (24x24 mm) for automotive body electronics and industrial applications. The device integrates a single-issue core, enhanced Variable Length Encoding (VLE) instruction set, FlexCAN, LINFlex, SPI, UART, and ADC peripherals, and is qualified to AEC-Q100 Grade 1 with -40 to +105 C operation. What is an automotive MCU? An automotive microcontroller is a semiconductor device that integrates a CPU core, memory, peripherals, and interfaces on a single chip, designed and qualified for harsh under-hood and cabin environments per AEC-Q100. Within the broader taxonomy: microcontroller -> 32-bit MCU -> Power Architecture MCU -> NXP Qorivva MPC56xx family -> automotive body-comfort MCU. The SPC560xB/C/D family targets body-electronics subsystems (BCM, lighting, HVAC, door modules, instrument clusters) where deterministic performance, CAN/LIN connectivity, and automotive-grade reliability are required. Key features include 1.5 MB program Flash, 80 KB SRAM, up to 64 MHz core frequency, an e200z0h single-issue 32-bit core with VLE, 16-channel 10-bit ADC, multiple FlexCAN 2.0 channels, LINFlex/UART/SPI peripherals, on-chip debug (JTAG/Nexus), and a 5V-tolerant I/O ring optimized for 3.3V or 5V system rails. The 176-LQFP footprint provides ample GPIO count (up to 120 GPIO) for distributed body-control networks. Typical applications include automotive body control modules (BCM), HVAC controllers, instrument clusters, lighting modules, and industrial PLC-class controllers. The qualified -40 C to +105 C operating range and AEC-Q100 certification make it well suited for placement in cabin and under-hood environments, including dash-top clusters and engine-bay peripheral ECUs. When designing with this device, ensure the 5V supply rail is decoupled with bulk + ceramic capacitors near each VDD pin pair, and route the JTAG/Nexus debug traces with 50 ohm characteristic impedance and length matching for reliable in-circuit programming.

USD $17.52 有现货
SPC5607BF1VLU6R - 32-bit Qorivva MCU, 1.5MB Flash, 64MHz | NXP
SPC5607BF1VLU6R

SPC5607BF1VLU6R - 32-bit Qorivva MCU, 1.5MB Flash, 64MHz | NXP

The NXP SPC5607BF1VLU6R is a 32-bit automotive-grade microcontroller based on the Power Architecture e200z0h core, delivering 64 MHz operation with 1.5 MB of on-chip Flash and 80 KB SRAM, housed in a 176-pin LQFP package (24x24 mm) for automotive body electronics and industrial applications. The device integrates a single-issue core, enhanced Variable Length Encoding (VLE) instruction set, FlexCAN, LINFlex, SPI, UART, and ADC peripherals, and is qualified to AEC-Q100 Grade 1 with -40 to +105 C operation. What is an automotive MCU? An automotive microcontroller is a semiconductor device that integrates a CPU core, memory, peripherals, and interfaces on a single chip, designed and qualified for harsh under-hood and cabin environments per AEC-Q100. Within the broader taxonomy: microcontroller -> 32-bit MCU -> Power Architecture MCU -> NXP Qorivva MPC56xx family -> automotive body-comfort MCU. The SPC560xB/C/D family targets body-electronics subsystems (BCM, lighting, HVAC, door modules, instrument clusters) where deterministic performance, CAN/LIN connectivity, and automotive-grade reliability are required. Key features include 1.5 MB program Flash, 80 KB SRAM, up to 64 MHz core frequency, an e200z0h single-issue 32-bit core with VLE, 16-channel 10-bit ADC, multiple FlexCAN 2.0 channels, LINFlex/UART/SPI peripherals, on-chip debug (JTAG/Nexus), and a 5V-tolerant I/O ring optimized for 3.3V or 5V system rails. The 176-LQFP footprint provides ample GPIO count (up to 120 GPIO) for distributed body-control networks. Typical applications include automotive body control modules (BCM), HVAC controllers, instrument clusters, lighting modules, and industrial PLC-class controllers. The qualified -40 C to +105 C operating range and AEC-Q100 certification make it well suited for placement in cabin and under-hood environments, including dash-top clusters and engine-bay peripheral ECUs. When designing with this device, ensure the 5V supply rail is decoupled with bulk + ceramic capacitors near each VDD pin pair, and route the JTAG/Nexus debug traces with 50 ohm characteristic impedance and length matching for reliable in-circuit programming.

USD $12.05 有现货
SPC5607BK0MLQ6 - 32-bit MCU, 1.5MB Flash, 64MHz | NXP | Automotive
SPC5607BK0MLQ6

SPC5607BK0MLQ6 - 32-bit MCU, 1.5MB Flash, 64MHz | NXP | Automotive

The NXP SPC5607BK0MLQ6 is a 32-bit automotive microcontroller of the MPC560xB Qorivva family, built around an e200z0h Power Architecture core running at 64 MHz, with 1.5 MB of on-chip Flash memory, housed in a 144-pin LQFP (20x20 mm) package rated from -40C to +125C and qualified to AEC-Q100 for automotive grade applications. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, program memory, data RAM, and peripheral controllers such as CAN, LIN, SPI, and ADC modules into one chip. Within the semiconductor hierarchy, an MCU sits under the broader categories of embedded processor and system-on-chip, and the SPC5607BK0MLQ6 specifically targets the automotive-grade MCU segment governed by AEC-Q100 qualification. Key features include 1.5 MB (1.5M x 8) of Flash program memory for large application code, a 64 MHz e200z0h RISC core delivering deterministic real-time performance, and an operating temperature range of -40C to +125C suitable for under-hood and harsh environments. The gull-wing LQFP-144 package offers 20x20 mm surface-mount footprint with 0.5 mm lead pitch, easing inspection and rework compared with BGA alternatives. Technically, the device belongs to NXP's MPC560xB/C/D family of Power Architecture based MCUs, which NXP describes as the latest integrated devices for automotive body electronics and industrial applications. The family is supported by an enablement ecosystem including software drivers, operating systems (such as AUTOSAR stacks), and configuration tools that accelerate design execution. Supply voltage support spans 3.3 V to 5 V per distributor parametric data. Typical applications include automotive body control modules, gateway nodes, lighting control, window/door/seat management, and industrial control systems requiring AEC-Q100 reliability. The scalable family architecture allows designers to migrate across memory sizes without redesigning the software framework. A key design consideration is thermal budgeting: at 64 MHz in a 144-lead plastic package, verify junction temperature stays within the 125C rating using the PCB copper pour as heatsink. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $9.55 有现货
SPC560B40L3 - 32-bit MCU, 512KB Flash, 64MHz | STMicroelectronics
SPC560B40L3

SPC560B40L3 - 32-bit MCU, 512KB Flash, 64MHz | STMicroelectronics

The SPC560B40L3 is a 32-bit microcontroller from STMicroelectronics, part of the SPC560B family based on the Power Architecture® e200z0h core. It operates at a maximum frequency of 64 MHz and features 512 KB of flash memory and 48 KB of RAM, making it suitable for automotive body and gateway applications. The device is housed in a 100-pin LQFP package (LQFP-100) and supports a supply voltage range of 3.3V to 5V. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals. The SPC560B40L3 belongs to the family of 32-bit automotive microcontrollers, which are a subset of embedded controllers used in vehicle electronics. These MCUs are optimized for real-time control, low power consumption, and high reliability in harsh environments. Key features of the SPC560B40L3 include a 64 MHz e200z0h core, 512 KB flash memory, 48 KB RAM, and a rich set of peripherals such as multiple CAN interfaces, LIN, SPI, and ADC. It also includes a flexible timer module (FTM) and a crossbar switch for efficient data routing. The device is designed to meet AEC-Q100 automotive qualification standards, ensuring reliable operation in automotive temperature ranges from -40°C to +125°C. The SPC560B40L3 utilizes a single-issue, 32-bit Power Architecture core with variable-length encoding (VLE) for code density. It integrates a memory protection unit (MPU) and a cyclic redundancy check (CRC) unit for enhanced safety. The MCU supports low-power modes, including halt and stop modes, to reduce power consumption in battery-powered applications. Typical applications include automotive body control modules, gateway modules, and sensor fusion units. The multiple CAN interfaces make it ideal for in-vehicle networking, while the ADC and timer modules support motor control and signal conditioning. The device's robust design and automotive qualification make it a reliable choice for safety-critical systems. When designing with the SPC560B40L3, ensure proper decoupling of the power supply pins and consider the thermal performance of the LQFP-100 package. The device requires a stable clock source, typically a 4-40 MHz crystal, and supports an internal RC oscillator for cost-sensitive designs.

USD $5.89 有现货
SPC560B40L3B4E0X - 32-bit MCU, 64MHz, 256KB Flash | STMicroelectronics
SPC560B40L3B4E0X

SPC560B40L3B4E0X - 32-bit MCU, 64MHz, 256KB Flash | STMicroelectronics

The SPC560B40L3B4E0X is a 32-bit automotive microcontroller from STMicroelectronics, built on the Power Architecture embedded category. It features a high-performance e200z0h CPU core running at 64 MHz, with 256KB of Flash memory and 24KB of RAM. The device is housed in a 100-pin LQFP package (14x14 mm) and operates from a 3.3V supply (3.0V to 3.6V). It is designed for automotive body electronics and gateway applications, offering a rich set of peripherals including CAN, LIN, SPI, and ADC interfaces. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals. The SPC560B40L3B4E0X belongs to the SPC56 family, which is part of STMicroelectronics' automotive-grade microcontroller portfolio. These devices are built on the Power Architecture, a RISC-based instruction set architecture widely used in automotive and industrial applications. The MCU sits at the heart of electronic control units (ECUs), managing functions such as body control, gateway routing, and sensor interfacing. Key features of the SPC560B40L3B4E0X include a 64 MHz e200z0h core, 256KB Flash, 24KB RAM, and a comprehensive set of communication interfaces. It supports up to 45 I/O ports, making it suitable for a wide range of automotive body control applications. The device is AEC-Q100 qualified, ensuring reliability in harsh automotive environments. It also features a flexible clock generation unit, multiple timers, and a 12-bit ADC for analog signal acquisition. From a technical perspective, the SPC560B40L3B4E0X leverages the Power Architecture's efficient instruction set to deliver high performance at low power consumption. The e200z0h core includes a single-precision floating-point unit (FPU) and a memory protection unit (MPU), enhancing its capability for complex control algorithms. The device supports a wide operating temperature range of -40°C to +125°C, making it suitable for under-hood applications. Its 100-pin LQFP package provides a compact footprint while offering ample I/O for peripheral connectivity. Typical applications include automotive body control modules, gateway modules, and sensor fusion units. The SPC560B40L3B4E0X is also used in industrial automation and smart grid systems where robust communication and real-time processing are required. Its CAN and LIN interfaces enable seamless integration into vehicle networks, while its low-power modes help reduce overall system power consumption. When designing with this MCU, it is essential to provide a stable 3.3V power supply with adequate decoupling capacitors near the VDD pins. The device requires an external crystal or oscillator for precise timing, and the reset circuit must be properly configured to ensure reliable startup. Additionally, the ADC reference voltage should be filtered to minimize noise in analog measurements.

USD $8.10 有现货
SPC560B40L3C6E0X - 32-bit MCU 64MHz 256KB Flash | STMicroelectronics
SPC560B40L3C6E0X

SPC560B40L3C6E0X - 32-bit MCU 64MHz 256KB Flash | STMicroelectronics

The SPC560B40L3C6E0X is a 32-bit microcontroller from STMicroelectronics, built on the Power Architecture embedded category. It features a high-performance e200z0h core running at 64 MHz, with 256KB of Flash memory and 24KB of RAM. The device is housed in a 100-pin LQFP package (14x14 mm) and is designed for automotive body and gateway applications. A 32-bit microcontroller is a single-chip computer integrating a processor core, memory, and programmable I/O peripherals. The Power Architecture is a RISC-based instruction set architecture originally developed by IBM, Motorola, and Apple, now widely used in automotive and networking applications. This MCU belongs to the SPC56 family, which is optimized for body electronics, offering a balance of performance, low power, and robust communication interfaces. Key features include a 64 MHz e200z0h core, 256KB Flash, 24KB RAM, and a rich set of peripherals such as multiple CAN, LIN, and SPI interfaces. The device operates from 3.0V to 3.6V supply, with 45 I/O ports. It is AEC-Q100 qualified for automotive use, ensuring reliability in harsh environments. The LQFP-100 package provides a compact footprint with good thermal performance. The SPC560B40L3C6E0X integrates a single-core e200z0h processor with a 32-bit Power Architecture, delivering up to 64 MHz performance. It includes a memory protection unit, DMA controller, and a flexible timer module. The MCU supports a wide range of communication protocols, making it suitable for gateway applications that require multiple bus interfaces. Typical applications include automotive body control modules, gateway modules, and lighting control. Its robust CAN and LIN interfaces enable seamless integration into vehicle networks. The device's low power consumption and wide operating temperature range (-40°C to +125°C) make it ideal for under-hood and cabin electronics. When designing with this MCU, ensure proper decoupling of the power supply and careful layout of the crystal oscillator. The device supports in-circuit programming and debugging via JTAG, facilitating development. For automotive designs, follow AEC-Q100 guidelines and consider using the SPC560B40L3C6E0X for its proven reliability.

USD $8.10 有现货
SPC560B54L3 - 32-bit MCU, 1.5MB Flash, 64MHz | STMicroelectronics
SPC560B54L3

SPC560B54L3 - 32-bit MCU, 1.5MB Flash, 64MHz | STMicroelectronics

The SPC560B54L3 is a 32-bit microcontroller from STMicroelectronics, based on the Power Architecture e200z0h core, operating at up to 64 MHz. It features 1.5 MB of embedded flash memory and 96 KB of RAM, making it suitable for automotive body electronics and industrial control applications. The device is housed in a 100-pin LQFP package (LQFP-100) and operates over a temperature range of -40°C to +125°C. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals. The SPC560B54L3 belongs to the SPC56 family of automotive microcontrollers, which are part of the broader Power Architecture portfolio. These MCUs are optimized for real-time control, with features like a 10-bit ADC, multiple CAN and LIN interfaces, and a flexible timer module (eTPU). Key features of the SPC560B54L3 include a 64 MHz e200z0h core with single-precision floating-point unit (FPU), 1.5 MB flash with ECC, 96 KB SRAM, and a rich set of communication interfaces: 3x FlexCAN, 3x LIN, and 2x SPI. It also integrates a 10-bit ADC with up to 16 channels, a 16-bit timer, and a watchdog timer. The device supports low-power modes and has a supply voltage range of 3.3V to 5V, making it flexible for various automotive and industrial power rails. The SPC560B54L3 is built on ST's advanced 90nm embedded flash process, providing high reliability and low power consumption. The e200z0h core is a cost-optimized version of the Power Architecture, delivering efficient code execution for control applications. The device includes a memory protection unit (MPU) and a cyclic redundancy check (CRC) unit for enhanced safety and data integrity, aligning with automotive safety standards. Typical applications include automotive body control modules (BCM), gateway modules, HVAC control, and industrial automation controllers. The multiple CAN and LIN interfaces make it ideal for in-vehicle networking, while the robust temperature range and AEC-Q100 qualification support harsh environments. When designing with the SPC560B54L3, ensure proper decoupling of the power supply pins and consider the thermal performance of the LQFP-100 package. The device requires a stable 3.3V or 5V supply and a crystal or oscillator for the system clock. Use the on-chip flash programming interface for firmware updates, and follow ST's application notes for optimal EMC performance.

USD $10.34 有现货
SPC560B60L7B6E0X - 32-bit 64MHz 1MB Flash Automotive MCU | ST
SPC560B60L7B6E0X

SPC560B60L7B6E0X - 32-bit 64MHz 1MB Flash Automotive MCU | ST

The STMicroelectronics SPC560B60L7B6E0X is a 32-bit system-on-chip microcontroller from the SPC560B60 family, built on the Power Architecture e200z0h core and targeted at automotive body and gateway applications. It integrates 1MB of on-chip Flash, runs at a core frequency of 64MHz, and is housed in a 176-pin LQFP package (24 x 24 mm). The device is qualified for 3.3V / 5V supply operation and supports industrial temperature grades, making it suitable for under-the-hood and chassis-mounted ECUs as well as body control modules. An automotive microcontroller (MCU) is a specialised class of embedded processor that integrates CPU, memory, communications peripherals, and analog/digital interfaces onto a single die to execute real-time control loops in vehicles. In the broader taxonomy, the SPC560B60 family sits below gateway/edge MCUs and above sensor-interface ASICs in the automotive electronics stack, providing deterministic interrupt response for CAN, LIN, and FlexRay network traffic while running AUTOSAR-classical or bare-metal application software. Key features include up to 77 general-purpose I/O lines, multiple CAN 2.0B-compliant interfaces, LIN, SPI, and an enhanced FlexCAN peripheral set. The CPU core combines the e200z0h Power Architecture instruction set with a 64MHz system bus, 1MB embedded Flash for program storage, and dedicated SRAM for stack and data. The 176-LQFP package supplies ample pin budget for simultaneous use of multiple communication buses and analog acquisition channels. The SPC560B60L7B6E0X uses the proven e200z0h core with a single-precision FPU option and a tightly-coupled interrupt controller, enabling deterministic latencies down to single-digit microseconds. The on-chip voltage regulator supports single-supply 5V operation, which simplifies ECU power-tree design and reduces external component count relative to discrete MCU + regulator solutions. Typical applications include automotive body control modules (BCM), gateway ECUs that bridge CAN/LIN/FlexRay segments, lighting controllers with PWM-driven LED drivers, HVAC control, and seat/window module electronics. The wide peripheral mix also suits industrial PLC and ruggedised sensor hubs that require CAN connectivity. When designing with this device, allocate PCB area for a 4-layer minimum stack-up to maintain signal integrity on the external memory interface and to provide adequate thermal dissipation across the 24x24mm package footprint. Plan decoupling against the 5V rail with low-ESR ceramic capacitors placed within 5mm of each supply pin pair. This page synthesises distributor pricing, drop-in same-family alternatives, and application guidance not found in the manufacturer datasheet alone, organised for engineers evaluating the SPC560B60L7B6E0X against adjacent SPC56 and SPC57 parts.

USD $10.85 有现货
SPC560B64L7B6E0X - 32-bit Automotive MCU, 1.5MB Flash, 64MHz | STMicroelectronics
SPC560B64L7B6E0X

SPC560B64L7B6E0X - 32-bit Automotive MCU, 1.5MB Flash, 64MHz | STMicroelectronics

The STMicroelectronics SPC560B64L7B6E0X is a 32-bit Power Architecture e200z0h automotive microcontroller with 1.5 MB Flash, 64 MHz CPU clock, and a 176-pin LQFP (24x24 mm) package, qualified for AEC-Q100 body electronics. It integrates 1.5 MB on-chip Flash, 96 KB SRAM, and a rich set of automotive peripherals including multiple CAN, LINFlex, SPI, and FlexRay interfaces. An automotive microcontroller is a specialized system-on-chip that integrates a CPU, memory, and mixed-signal peripherals onto a single die to control vehicle body, chassis, and powertrain functions in real time. The SPC560B family targets body and chassis applications such as central body controllers, smart junction boxes, front modules, door modules, seat controllers, body peripherals, and gateway ECUs. As a 32-bit automotive MCU, it sits within the broader microcontroller hierarchy (8-bit -> 16-bit -> 32-bit -> 64-bit) and within the automotive-specific Power Architecture family (e200z0 -> e200z0h -> e200z4 -> e200z6), occupying a low-power, cost-optimized tier for deterministic real-time body control. Key features include the VLE (variable-length encoding) APU for improved code density, hardware CRC, a 64-channel eDMA controller, a 12-bit ADC, eMIOS timer/pulse generation, and an enhanced modular I/O subsystem. The 176-LQFP exposed-pad package provides a thermal-resistance path for automotive under-hood and cabin environments. The supply range of 3 V to 3.6 V (with 5 V-tolerant I/O on selected pins) and AEC-Q100 qualification make this part suitable for OEM and Tier-1 automotive designs. The e200z0h core implements the Power Architecture VLE-only subset, trading richer SIMD DSP capability for smaller code footprint and predictable interrupt latency. The SPC560B64x family is a die-shrink revision of the SPC560B40/50x, doubling Flash density while keeping the same LQFP-176 footprint, which simplifies migration for existing designs. The on-chip flash controller supports concurrent read-while-write to simplify boot-loader and OTA workflows. Typical applications include central body controllers, smart junction boxes, front modules, door and seat controllers, body peripherals such as lighting and wiper control, and CAN/LIN gateway nodes. AEC-Q100 Grade 2 qualification supports deployment under the hood and in harsh cabin environments where thermal stress is significant. When designing with this MCU, place bulk decoupling within 50 mm of each VDD/VSS pair and route high-speed CAN/LIN traces as 100-ohm differential pairs with impedance matching. Preserve JTAG access on dedicated header pins so boundary-scan and in-circuit flash programming remain available after PCB assembly. This page synthesizes distributor pricing, AEC-Q100 cross-reference alternatives, and practical automotive design notes not found in the manufacturer datasheet, providing engineers with a single condensed view for body-control MCU selection.

USD $9.60 有现货
SPC560D30L1 - 32-bit MCU, 1MB Flash, 64MHz | STMicroelectronics
SPC560D30L1

SPC560D30L1 - 32-bit MCU, 1MB Flash, 64MHz | STMicroelectronics

The SPC560D30L1 is a 32-bit microcontroller from STMicroelectronics, part of the SPC560D family based on the Power Architecture e200z0h core. It operates at a maximum frequency of 64 MHz and features 1 MB of flash memory and 96 KB of RAM, making it suitable for automotive body and gateway applications. The device is available in a 100-pin LQFP package and supports a supply voltage range of 3.3V to 5V. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals. The SPC560D30L1 belongs to the family of 32-bit automotive microcontrollers, which are part of the broader category of embedded processors used in vehicle control units. These MCUs are optimized for real-time performance, reliability, and low power consumption, often meeting AEC-Q100 automotive qualification standards. Key features of the SPC560D30L1 include a 64 MHz e200z0h Power Architecture core, 1 MB flash memory, 96 KB RAM, and a rich set of communication interfaces such as CAN, LIN, and SPI. It also integrates a 10-bit ADC, multiple timers, and a flexible PWM module. The device supports a wide operating temperature range of -40°C to +125°C, making it suitable for harsh automotive environments. The SPC560D30L1 is built on a highly reliable flash technology with ECC (Error Correction Code) support, ensuring data integrity in safety-critical applications. The MCU includes a Memory Protection Unit (MPU) and a Cyclic Redundancy Check (CRC) unit for enhanced security and data validation. Its low-power modes, including stop and standby, help reduce energy consumption in battery-powered systems. Typical applications include automotive body control modules, gateway modules, and sensor fusion units. The device's robust CAN and LIN interfaces enable seamless communication in vehicle networks, while its high-speed ADC and PWM capabilities support motor control and lighting applications. When designing with the SPC560D30L1, ensure proper decoupling of the power supply pins and a stable clock source. The device requires a 4-40 MHz crystal or external clock for operation. Careful PCB layout is essential to minimize electromagnetic interference, especially in automotive environments.

USD $8.10 有现货
SPC560D30L3 - 32-bit MCU, 1MB Flash, 64MHz | STMicroelectronics
SPC560D30L3

SPC560D30L3 - 32-bit MCU, 1MB Flash, 64MHz | STMicroelectronics

The SPC560D30L3 is a 32-bit microcontroller from STMicroelectronics, part of the SPC560D family based on the Power Architecture® e200z0h core. It operates at a maximum frequency of 64 MHz and provides 1 MB of flash memory and 96 KB of RAM, making it suitable for automotive body and gateway applications. The device is available in a LQFP-100 package, offering a compact footprint for space-constrained designs. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (flash and RAM), and programmable input/output peripherals. The SPC560D30L3 belongs to the class of 32-bit automotive microcontrollers, which are optimized for real-time control, robust communication interfaces, and high reliability under harsh environmental conditions. Within the hierarchy, it is a microcontroller -> automotive MCU -> Power Architecture MCU -> SPC560 family. Key features of the SPC560D30L3 include a 64 MHz e200z0h core with single-precision floating-point unit (FPU), 1 MB flash with ECC, 96 KB SRAM, and a rich set of communication interfaces: 3× FlexCAN, 3× LINFlex, 3× DSPI, and 1× I2C. It also integrates a 10-bit ADC with up to 16 channels, multiple timers (eMIOS, PIT, STM), and a CRC unit. The device supports a supply voltage range of 3.3V to 5V, with an operating temperature range of -40°C to +125°C, meeting AEC-Q100 Grade 1 requirements. Technically, the SPC560D30L3 is built on a 90nm process technology, offering a balance between performance and power consumption. The e200z0h core is a single-issue, 32-bit Power Architecture core with variable-length encoding (VLE) for code density, reducing flash usage by up to 30% compared to traditional PowerPC instructions. The device includes a memory protection unit (MPU) and a memory management unit (MMU) for enhanced safety, and it supports a Nexus class 1 debug interface for real-time trace. Typical applications include automotive body control modules (BCM), gateway modules, smart junction boxes, and industrial control systems. The SPC560D30L3's robust CAN and LIN interfaces make it ideal for in-vehicle networking, while its high-temperature rating and AEC-Q100 qualification ensure reliable operation in under-hood environments. When designing with this device, ensure proper decoupling of the power supply pins with 100nF capacitors placed close to each VDD pin, and a 4.7µF bulk capacitor on the main supply. The device requires a stable clock source; an external 8-40 MHz crystal can be used with the on-chip oscillator, or an external clock can be applied. For safety-critical applications, use the built-in self-test (BIST) and cyclic redundancy check (CRC) modules to enhance diagnostic coverage.

USD $8.10 有现货
SPC560D40L1 - 32-bit MCU, 1.5MB Flash, 64MHz | STMicroelectronics
SPC560D40L1

SPC560D40L1 - 32-bit MCU, 1.5MB Flash, 64MHz | STMicroelectronics

The SPC560D40L1 is a 32-bit microcontroller from STMicroelectronics, part of the SPC560D family based on the Power Architecture e200z0h core. It operates at a maximum core frequency of 64 MHz and provides 1.5 MB of embedded flash memory and 96 KB of RAM, making it suitable for automotive body electronics and industrial control applications. The device is offered in a 100-pin LQFP package (LQFP-100) with a 14x14 mm body, supporting surface-mount assembly. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (flash and RAM), and programmable input/output peripherals on a single chip. MCUs are the building blocks of modern automotive electronics, industrial automation, and consumer devices, providing the intelligence to control sensors, actuators, and communication interfaces. The SPC560D40L1 sits within the broader hierarchy of embedded processors, specifically as a 32-bit automotive-grade MCU, which offers higher performance and memory than 8-bit or 16-bit counterparts while maintaining real-time responsiveness. Key features of the SPC560D40L1 include a 64 MHz e200z0h core with single-precision floating-point unit (FPU), 1.5 MB flash with error correction code (ECC), 96 KB SRAM, and a rich set of peripherals: two FlexCAN modules for CAN 2.0B communication, multiple eSCI (UART) and DSPI (SPI) interfaces, a 16-channel 12-bit ADC, and a flexible timer module (eMIOS). The device also integrates a crossbar switch (XBAR) for efficient bus arbitration and a memory protection unit (MPU) for enhanced safety. These features enable complex real-time control and communication in automotive body control modules, gateway nodes, and industrial motor control. The SPC560D40L1 is designed for harsh environments, with an operating temperature range of -40°C to +125°C (ambient) and AEC-Q100 qualification, ensuring reliability in automotive applications. It supports low-power modes (HALT, STOP, STANDBY) to reduce energy consumption in battery-powered systems. The MCU is programmed via JTAG or LINFlex (UART) bootloader, and development is supported by ST's SPC5 Studio IDE and third-party tools like IAR and GCC. Typical applications include automotive body control modules (BCM), door and seat control units, HVAC control, industrial PLCs, and motor control for pumps and fans. The combination of CAN, LIN, and rich analog peripherals makes it a versatile choice for distributed automotive networks. When designing with the SPC560D40L1, ensure proper decoupling of the VDD and VDDA pins with 100 nF ceramic capacitors placed close to the pins, and provide a stable 5V or 3.3V supply. The device requires an external crystal or oscillator on the EXTAL/XTAL pins for the main clock; a 8-40 MHz crystal is recommended. For EMI-sensitive designs, use the internal PLL with spread-spectrum modulation if available.

USD $8.10 有现货
SPC560D40L3 - 32-bit MCU, 1.5MB Flash, 64MHz | STMicroelectronics
SPC560D40L3

SPC560D40L3 - 32-bit MCU, 1.5MB Flash, 64MHz | STMicroelectronics

The SPC560D40L3 is a 32-bit microcontroller from STMicroelectronics, based on the Power Architecture e200z0h core. It operates at a maximum frequency of 64 MHz and features 1.5 MB of flash memory and 96 KB of RAM. The device is housed in a 100-pin LQFP package, making it suitable for a wide range of automotive and industrial applications. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals. The SPC560D40L3 belongs to the SPC56 family of automotive microcontrollers, which are part of the broader Power Architecture portfolio. These MCUs are optimized for real-time control, safety-critical applications, and harsh environments, offering a balance of performance, power efficiency, and reliability. Key features of the SPC560D40L3 include a 64 MHz e200z0h core, 1.5 MB flash memory, 96 KB RAM, and a rich set of peripherals such as multiple CAN, LIN, SPI, and I2C interfaces. It also includes advanced timers, ADCs, and a flexible memory protection unit. The device supports a wide operating voltage range of 3.3V to 5V and is designed for extended temperature ranges from -40°C to +125°C, making it ideal for under-the-hood automotive applications. Technically, the SPC560D40L3 is built on a 90nm process technology, offering a good balance of performance and power consumption. The e200z0h core is a single-issue, 32-bit Power Architecture core with a five-stage pipeline, providing efficient execution of control algorithms. The MCU includes a memory protection unit (MPU) and a cyclic redundancy check (CRC) unit for enhanced safety and data integrity. It also features a fail-safe clock monitor and a watchdog timer to ensure reliable operation in safety-critical systems. Typical applications include engine control units (ECUs), transmission control, body control modules, and industrial automation. The SPC560D40L3 is particularly well-suited for automotive body electronics, where its robust communication interfaces and low-power modes are essential. In industrial settings, it can be used for motor control, PLCs, and process control systems. When designing with the SPC560D40L3, it is important to consider proper decoupling of the power supply pins and careful layout of the crystal oscillator circuit. The device supports multiple low-power modes, which can be leveraged to reduce overall system power consumption. Additionally, the flash memory can be programmed in-circuit, simplifying firmware updates in the field.

USD $8.10 有现货
SPC560P34L1CEFAR - 32-bit 64MHz Auto MCU 192KB Flash | STMicroelectronics
SPC560P34L1CEFAR

SPC560P34L1CEFAR - 32-bit 64MHz Auto MCU 192KB Flash | STMicroelectronics

The STMicroelectronics SPC560P34L1CEFAR is a 32-bit automotive microcontroller from the SPC56 family built on the Power Architecture e200z0h core, delivering 64 MHz CPU clock with 192 KB on-chip Flash program memory and packaged in a 64-pin LQFP (10x10 mm). The SPC560P34L1CEFAR is in volume production and targets chassis, body-electronics, and vehicle network control applications. It is qualified for 5 V automotive electrical environments and offers peripheral integration suited for CAN/LIN-connected ECUs. An automotive MCU (microcontroller) is a single-chip processor integrating CPU, memory, timers, ADC, and communication peripherals, designed to operate reliably under harsh vehicle conditions such as temperature extremes, voltage transients, and EMC stress. Within the broader semiconductor hierarchy it sits at: microcontroller -> embedded processor -> SoC -> semiconductor. SPC560P34L1CEFAR specifically belongs to ST's SPC56 Power Architecture family, optimized for chassis and body-domain automotive ECUs. Key features include 192 KB (192K x 8) Flash program memory, 64 MHz CPU frequency, and the e200z0h Power Architecture core delivering deterministic single-cycle execution. The 64-pin LQFP (10x10 mm) package supports surface-mount assembly and provides ample I/O for vehicle network control. Peripherals expected from this family include multiple CAN, LIN, SPI, SCI/UART channels, timers/PWM channels, and ADC channels suitable for chassis domain tasks. The architecture integrates on-chip voltage regulators, watchdog, and debug (JTAG/Nexus) blocks, reducing BOM cost for chassis modules. Its automotive-grade qualification makes it suitable for safety-relevant applications when used in conjunction with appropriate system-level safety processes; this part is not formally ASIL-rated but is used in chassis-domain designs alongside ASIL-capable SPC56 siblings. Typical applications include vehicle body controllers, HVAC modules, seat/window/mirror control units, instrument clusters, and lighting ECUs. Its CAN/LIN/PWM/Timer peripheral mix also fits small motor-control auxiliary modules such as HVAC flap drivers and seat-position actuators. Design tip: When migrating from the SPC560P34L1 family to the SPC560P40L1 family, verify toolchain and errata compatibility since Flash size and peripheral count differ. Always run the ST-provided BSP (SPC5Studio / SPC56x BSP) against the device errata sheet before committing to a layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate supply, pin-compatible replacements, and engineering trade-offs.

USD $3.80 有现货
SPC560P34L1CEFAY - 32-bit Auto Chassis MCU, 64MHz, 192KB Flash LQFP-64
SPC560P34L1CEFAY

SPC560P34L1CEFAY - 32-bit Auto Chassis MCU, 64MHz, 192KB Flash LQFP-64

The STMicroelectronics SPC560P34L1CEFAY is a 32-bit Power Architecture system-on-chip (SoC) automotive microcontroller operating at up to 64 MHz with 192 KB of embedded Flash, 14 KB SRAM, and a 64-pin (10x10 mm) LQFP package. It integrates an e200z0h core, dual 12-bit SAR ADC modules, a FlexCAN (CAN 2.0B) controller, LINFlex, DSPI, and UART/USART communication peripherals, optimized specifically for chassis and body electronics. The device operates from a 3.0 V to 5.5 V supply, supports up to 5.0 V I/O with 5 V-tolerance on most digital inputs, and is qualified per AEC-Q100 for automotive use. Background: A 32-bit automotive microcontroller is an MCU whose instruction set, peripherals, and qualification pedigree target body and chassis domains rather than infotainment or ADAS. Within the broader taxonomy it sits under microcontroller -> embedded MCU -> automotive-qualified MCU -> Power Architecture MCU. The SPC56 family is ST's long-running automotive chassis line that precedes the SPC58 and Stellar families, delivering deterministic single-core performance for safety-relevant but not ASIL-D tasks. Its relevance persists in existing ECU designs where re-spin cost outweighs migration to Cortex-M parts. Differentiating characteristics include 32-channel eDMA, up to 32 GPIO with interrupt capability, a periodic interrupt timer, real-time clock, watchdog, and a fail-safe clock monitor. The integrated FlexCAN supports up to 6 mailboxes with CAN 2.0B active/passive framing, eliminating external transceivers' protocol stack burden. Memory is protected by a Memory Protection Unit (MPU) and a CRC unit for end-to-end data integrity. Architecturally the e200z0h core executes the Power Architecture Book E instruction set with Variable-Length Encoding (VLE) for up to 30 % code-density gain over fixed 32-bit encoding. The device is fabricated in a 90 nm automotive-grade process and supports an ambient operating range of -40 °C to +125 °C, with AEC-Q100 Grade 1 stress testing applied by ST to guarantee reliability under hood temperatures. Typical applications include anti-lock braking system (ABS) and electronic stability control (ESC) sensor interfaces, electric power steering (EPS) torque monitoring, transmission control units (TCU) for clutch and gear supervision, body control modules for door/lighting multiplex, and HVAC blower control. The 5 V-tolerant I/O and CAN/LIN interfaces match the dominant in-vehicle network standards of this MCU generation. Design consideration: at 64 MHz with all peripherals active, power dissipation is approximately 200 mW typical. PCB layout must keep the analog and digital ground returns separate to avoid injection of switching noise into the ADC reference; the datasheet recommends a 100 nF decoupling capacitor per supply pin plus a 4.7 µF bulk on each main rail. Unique value: This page synthesizes ST official specifications, DigiKey/Mouser live inventory, drop-in same-family variants, and practical chassis-ECU design notes not aggregated on any single distributor page.

USD $5.95 有现货
SPC560P40L1CEFAR - 32-bit 64MHz Auto MCU 256KB Flash LQFP-64
SPC560P40L1CEFAR

SPC560P40L1CEFAR - 32-bit 64MHz Auto MCU 256KB Flash LQFP-64

The STMicroelectronics SPC560P40L1CEFAR is a 32-bit Power Architecture based automotive microcontroller from the SPC56 family featuring an e200z0h core running at 64 MHz with 256 KB of Flash memory and 20 KB of SRAM, housed in a 64-pin LQFP (10x10 mm) surface-mount package. This AEC-Q100 qualified SoC is targeted at automotive chassis and safety applications where deterministic real-time performance is mandatory, and includes integrated peripherals for CAN-based vehicle networks, timers, ADC, and a flexible interrupt controller. The device operates from a 5 V supply with wide tolerance, supporting direct battery connection through the voltage regulator on chassis harnesses. An automotive microcontroller (MCU) is a specialized microprocessor designed for safety-critical vehicle subsystems. Within the embedded hierarchy, an MCU sits between a generic microprocessor and a domain controller; the SPC56 line specifically targets powertrain, chassis, and body domains where compliance with ISO 26262 functional safety standards is required. The SPC560P40L1 variant combines the simplicity of a single-core architecture with the peripheral integration needed to replace multiple discrete ECUs in body control and sensor interfacing. Key features include 256 KB on-chip Flash with ECC, 20 KB SRAM with ECC, four enhanced timers for motor control or PWM generation, a 10-bit ADC with up to 27 channels, two CAN 2.0B controllers supporting ISO 11898-1, an SPI/SCI/UART peripheral set, a 16-channel DMA controller, and a dedicated hardware watchdog. The 64 MHz bus provides single-cycle execution from on-chip Flash thanks to a 2-stage pipeline and unified 4 KB instruction cache, delivering predictable interrupt latency for safety loops. The architecture implements a Harvard-style bus with separate 32-bit instruction and 32-bit data paths. Built-in error correction on Flash and SRAM memories supports detection of single-bit errors and correction of single-bit faults in real time, which is critical for ASIL-B chassis applications. A junction temperature range from -40 C to +125 C plus AEC-Q100 qualification confirms operating reliability under hood. Typical applications include electric power steering, anti-lock braking systems (ABS), electronic stability control (ESC), airbag controllers, suspension control, and CAN-based body control modules. The 256 KB Flash variant targets modules with substantial calibration data and fixed-function code that exceeds the 128 KB boundary of the SPC560P34 variant. When designing with this MCU, ensure the 5 V supply remains within the 3.0 V to 5.5 V range during crank pulses, route the LQFP exposed pad to a continuous ground plane, and verify the JTAG and Nexus port assignments against the application note SPC560P40_AN. The CEFAR suffix indicates tape-and-reel packaging on a 1000-unit reel for OEM assembly lines. This page synthesizes distributor pricing, drop-in alternatives within the SPC56 family, and practical design guidance beyond what the manufacturer datasheet alone provides, helping engineers choose between the SPC560P40L1, SPC560P34L1, and cross-package derivatives for chassis domain projects.

USD $5.42 有现货
SPC560P40L3 - 32-bit MCU, 512KB Flash, 64MHz | STMicroelectronics
SPC560P40L3

SPC560P40L3 - 32-bit MCU, 512KB Flash, 64MHz | STMicroelectronics

The SPC560P40L3 is a 32-bit microcontroller from STMicroelectronics' SPC560P family, based on the Power Architecture e200z0h core. It operates at a maximum frequency of 64 MHz and features 512 KB of flash memory and 48 KB of RAM. The device is housed in a 100-pin LQFP package (LQFP-100) and is designed for automotive and industrial applications requiring robust performance and safety features. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (flash and RAM), and programmable input/output peripherals. The SPC560P40L3 belongs to the category of 32-bit automotive microcontrollers, which are optimized for real-time control, safety-critical functions, and harsh environments. These MCUs are part of the broader power management and control hierarchy, often used in engine control units (ECUs), body control modules, and industrial automation systems. Key features of the SPC560P40L3 include a 64 MHz e200z0h core with single-precision floating-point unit (FPU), 512 KB flash with ECC, 48 KB SRAM, and a rich set of peripherals: 2x eSCI (UART), 2x DSPI (SPI), 1x FlexCAN, 1x eMIOS (timer), 1x ADC with 16 channels, and up to 64 GPIO pins. It supports a supply voltage range of 3.3V to 5V, with an operating temperature range of -40°C to +125°C, making it suitable for automotive under-hood applications. The device is AEC-Q100 qualified and RoHS compliant. Technically, the SPC560P40L3 is built on a 90nm flash process, offering a balance of performance and power efficiency. The e200z0h core is a Power Architecture v1.1 compliant core with variable-length encoding (VLE) for code density, reducing memory footprint. The MCU includes a memory protection unit (MPU), a cyclic redundancy check (CRC) unit, and a fail-safe protection module, enhancing reliability for safety-critical systems. The FlexCAN module supports CAN 2.0B with up to 32 message buffers, enabling robust communication in automotive networks. Typical applications include automotive body control modules (BCMs), engine management systems, transmission control units, and industrial motor control. The SPC560P40L3's combination of high-speed processing, extensive peripherals, and automotive-grade reliability makes it ideal for real-time control loops and communication-intensive tasks. For example, in a BCM, it manages lighting, door locks, and window lifts, while communicating over CAN bus. When designing with this device, ensure proper decoupling of the power supply pins with 100nF capacitors close to each VDD pin, and a 10uF bulk capacitor. The device requires a stable clock source; an external 8-40 MHz crystal can be used with the on-chip oscillator. For safety-critical applications, use the built-in self-test (BIST) and CRC modules to meet ISO 26262 requirements. Also, consider the thermal dissipation: the LQFP-100 package has a thermal resistance of 45°C/W, so adequate PCB copper area is needed for high ambient temperatures.

USD $8.10 有现货