集成电路

子分类

📁 ADC/DAC 2518 产品 📁 放大器IC 795 产品 📁 音频编解码器 16 产品 📁 音频IC 2 产品 📁 时钟与计时 290 产品 📁 DSP 962 产品 📁 数据采集IC 2 产品 📁 数字电位器 4 产品 📁 显示驱动与控制器 1 产品 📁 FPGA与CPLD 6666 产品 📁 接口IC 1571 产品 📁 LED驱动器 1 产品 📁 逻辑IC 305 产品 📁 存储IC 875 产品 📁 微控制器 18695 产品 📁 微处理器 4 产品 📁 电机驱动器 1 产品 📁 其他 1 产品 📁 Sensor and Detector Interfaces 1 产品 📁 专用IC 15 产品 📁 视频IC 13 产品

产品（32740)

A3P600-1PQG208 - ProASIC3 FPGA 600K 208-QFP | Microchip
A3P600-1PQG208

A3P600-1PQG208 - ProASIC3 FPGA 600K 208-QFP | Microchip

The Microchip Technology A3P600-1PQG208 is a ProASIC3 family flash-based FPGA with 600K system gates, 154 user I/Os, 110592 bits of configuration flash, a maximum system performance of 272 MHz, and 1.5V core operation, housed in a 208-pin BFQFP (PQG208) surface-mount package in a -1 commercial speed grade. A flash FPGA is a field-programmable gate array whose configuration is stored in on-chip nonvolatile flash memory rather than an external configuration device or volatile SRAM. This places the ProASIC3 within the broader hierarchy of programmable logic: FPGA -> flash-based FPGA -> programmable logic device -> semiconductor. Because configuration is nonvolatile, ProASIC3 devices are Instant On and single-chip, needing no boot PROM and offering inherent design security against configuration readback. Key features of the A3P600 include 600K system gates in 130nm flash technology, low total cost of ownership (TOC), and reprogrammability for design iterations. The 154 user I/Os support banked I/O voltages, and the flash cell architecture eliminates the external configuration memory required by SRAM FPGAs, reducing BOM cost and board area. Architecturally, ProASIC3 is the third generation of Microchip's (formerly Actel/Microsemi) flash FPGA family, superseding ProASICPLUS. Four I/O banks are provided on the A3P600, each with dedicated VCCIBx supplies so only compatible I/O standards share a bank. The 130nm process balances density, cost, and power for mid-range designs. Typical applications include industrial control, communications interface bridging, secure single-chip logic, aerospace-adjacent control logic, and glueless ASIC prototyping where a secure, single-chip, instantly-configured FPGA is preferred over SRAM alternatives. For design, respect the I/O bank voltage rules documented in the ProASIC3 migration application notes, and verify speed-grade timing (-1 commercial, 0C to +70C) against your system clock requirements. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
A3P600-1PQG208I - ProASIC3 FPGA 600K Gates | Microchip
A3P600-1PQG208I

A3P600-1PQG208I - ProASIC3 FPGA 600K Gates | Microchip

The Microchip A3P600-1PQG208I is a flash-based Field Programmable Gate Array (FPGA) from the ProASIC3 family, offering 600,000 system gates, 13,824 VersaTiles (equivalent to 7K logic elements), and 154 user I/Os in a 208-pin PQFP (28x28 mm) package. It operates from a 1.5V core supply with a maximum operating frequency of 272 MHz, fabricated on 130nm flash technology, and is rated for the industrial temperature range of -40°C to +100°C. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing to implement arbitrary digital logic functions. Unlike microcontrollers that execute software, FPGAs implement hardware logic directly, providing parallel processing and deterministic timing. The ProASIC3 family uses nonvolatile flash-based configuration, meaning the design is stored on-chip and is instantly available at power-up (Instant On), eliminating the need for external configuration memory and providing inherent security against reverse engineering. Key features of the A3P600-1PQG208I include 600K system gates, 13,824 VersaTiles (each configurable as a 3-input LUT or D-flip-flop), 154 user I/Os, and 110,592 bits of RAM. The device supports multiple I/O standards including LVCMOS, LVTTL, PCI, and LVDS, with four I/O banks that have dedicated supply pins. The flash-based architecture provides single-chip, low-power operation with instant-on capability and design security, making it ideal for cost-sensitive applications. The ProASIC3 architecture uses a proprietary VersaTile core that can be configured as either a three-input lookup table (LUT) equivalent or as a D-flip-flop/latch with enable. This flexibility allows efficient implementation of both combinatorial and sequential logic. The device includes 4 phase-locked loops (PLLs) for clock management, and supports in-system programming (ISP) via JTAG, allowing field updates. The 130nm flash process provides low static power consumption, making it suitable for battery-powered applications. Typical applications include industrial control, automotive electronics, communications infrastructure, and consumer electronics where low cost, instant-on operation, and design security are critical. The 208-pin PQFP package provides a good balance of I/O count and board area, suitable for medium-complexity designs. The industrial temperature rating allows operation in harsh environments. When designing with this device, ensure proper decoupling of the 1.5V core supply and the I/O bank supplies (VCCIBx). The four I/O banks have dedicated supplies, so only I/Os with compatible voltage standards can be assigned to the same bank. Use the PLLs for clock generation and consider the 272 MHz maximum frequency for timing closure. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3P600-1PQG208I.

询价 联系我们
A3P600-2FG144 - ProASIC3 FPGA, 600K Gates | Microchip
A3P600-2FG144

A3P600-2FG144 - ProASIC3 FPGA, 600K Gates | Microchip

The Microchip Technology A3P600-2FG144 is a ProASIC3 Field Programmable Gate Array (FPGA) with 600,000 system gates, 13,824 CLBs, and 97 user I/Os, housed in a 144-ball LBGA (13x13 mm) package. It operates from a 1.425V to 1.575V core supply and supports a maximum clock frequency of 350 MHz, making it a high-performance, low-density, single-chip programmable logic solution. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing to implement arbitrary digital logic functions. FPGAs sit within the hierarchy of programmable logic devices (PLDs), above CPLDs in capacity and complexity, and are used to prototype or implement digital systems without the non-recurring engineering costs of ASICs. The ProASIC3 family is a flash-based FPGA, meaning configuration is stored in non-volatile flash cells, allowing instant-on operation and secure, low-power designs. Key features of the A3P600-2FG144 include 600,000 system gates, 13,824 CLBs, 97 user I/Os, and 110,592 bits of RAM. The device supports a wide range of I/O standards and includes advanced clock management with up to 6 PLLs. Its flash-based architecture provides inherent security against reverse engineering and supports single-chip, live-at-power-up operation without an external boot device. Technically, the ProASIC3 family uses a 130-nm flash process, offering low power consumption and high reliability. The device provides 1,024 bits of FlashROM for user data, and its non-volatile configuration means no external configuration memory is required. The 144-FPBGA package measures 13x13 mm with a 1.00 mm ball pitch, enabling compact PCB designs. Typical applications include industrial control, automotive electronics, communications infrastructure, and consumer electronics where low power, security, and instant-on capability are critical. The A3P600-2FG144 is also suitable for aerospace and defense systems requiring radiation-tolerant, flash-based FPGAs. When designing with this device, ensure the core supply is within 1.425V to 1.575V and provide adequate decoupling on all power pins. The device is RoHS non-compliant, so verify your environmental compliance requirements before use. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a comprehensive resource for engineers evaluating the A3P600-2FG144.

询价 联系我们
A3P600-2FG256 - ProASIC3 FPGA 600K Gates 256-FBGA | Microchip
A3P600-2FG256

A3P600-2FG256 - ProASIC3 FPGA 600K Gates 256-FBGA | Microchip

The Microchip Technology (formerly Microsemi) A3P600-2FG256 is a ProASIC3 flash-based FPGA with 600,000 system gates, 177 user I/Os, and a maximum system frequency of 310 MHz, housed in a 256-ball Fine-Pitch Ball Grid Array (FBGA/LBGA) package operating from a 1.5V core supply. A flash-based FPGA is a field-programmable gate array whose configuration is stored in on-chip flash memory cells rather than SRAM, so it retains its configuration through power cycles and needs no external configuration PROM. Within the programmable logic hierarchy (FPGA -> programmable logic device -> digital IC -> semiconductor), flash FPGAs occupy the single-chip, secure, low-power niche, and the ProASIC3 family is built on a 130nm CMOS flash process with optional soft ARM support. Key features of the A3P600-2FG256 include 600K system gates, 177 available user I/Os, support for multiple I/O voltage banks (VCCIBx), 1.5V core operation, instant-on operation, and single-chip functionality that eliminates external boot flash. The -2 speed grade delivers up to 310 MHz system performance, and the fabric supports embedded memory blocks and soft ARM core implementations for mixed logic-processor designs. Architecturally, ProASIC3 uses a sea-of-gates fabric of VersaTiles - fine-grained logic tiles that implement latches, flip-flops, or combinational functions without routing-dependent delays - giving deterministic timing. Four I/O banks per device allow mixed-voltage I/O standards, and VCCIBx pins are routed through corresponding banks so only compatible I/O standards share a bank, per Microchip's ProASIC3 migration application notes. Typical applications include industrial automation controllers, portable and battery-powered instruments benefiting from the family's low static power, secure single-chip designs where configuration data must not be readable externally, communications line cards, and military/industrial systems migrating to the RTAX-series radiation-tolerant relatives. Design consideration: verify I/O bank assignment early - only I/O standards electrically compatible with the same VCCIBx voltage may share a bank, and the 256-FBGA has a fixed ballout, so bank conflicts discovered late force PCB rework. This page synthesizes distributor pricing, drop-in package-compatible alternatives, AEO-optimized FAQs, and practical design notes not found in the manufacturer datasheet, as of 2026-09-01.

询价 联系我们
A3P600-2FG256I - ProASIC3 Flash FPGA 256-FBGA | Microchip
A3P600-2FG256I

A3P600-2FG256I - ProASIC3 Flash FPGA 256-FBGA | Microchip

The Microchip Technology A3P600-2FG256I is a ProASIC3 family flash-based FPGA offering approximately 7,000 logic elements (LEs) with 177 user I/Os in a 256-ball Fine-Pitch Ball Grid Array (FBGA) package. It operates from a 1.5V core supply and is rated for the industrial temperature range of -40C to +85C. A field-programmable gate array (FPGA) is a semiconductor device containing a fabric of configurable logic blocks and interconnects that the designer programs after manufacturing. FPGAs sit within the broader programmable logic hierarchy: FPGA -> programmable logic IC -> logic IC -> semiconductor. The ProASIC3 family is distinctive because it uses flash-based configuration memory rather than SRAM, so it is a single-chip, non-volatile solution that requires no external configuration PROM and powers up instantly. Key features of the A3P600 include live-at-power-up operation enabled by flash technology, reprogrammability without a boot device, low total cost of ownership (TOC), and a rich I/O set supporting popular single-ended and differential standards. The -2 speed grade provides higher system performance than the -1 grade, while the industrial suffix (I) guarantees -40C to +85C operation for harsh environments. Technically, the ProASIC3 fabric is built on Microchip's VersaTile architecture, where each tile can act as a three-input lookup table (LUT), a D-flip-flop, or a latch with enable, allowing efficient logic packing. I/O banks are grouped with dedicated VCCIBx supplies so only electrically compatible I/O standards share a bank, simplifying mixed-voltage board design. Typical applications include industrial automation and control, communications line cards, medical instrumentation, aerospace and defense sub-systems, and secure single-chip designs where non-volatile, instant-on configuration is mandatory. A key design consideration: verify I/O bank voltage assignments early, because VCCIBx banks constrain which I/O standards may share a bank, and confirm the -2 speed grade meets your timing closure margin at 1.5V core. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
A3P600-2FG484 - ProASIC3 FPGA, 600K Gates | Microchip
A3P600-2FG484

A3P600-2FG484 - ProASIC3 FPGA, 600K Gates | Microchip

The Microchip Technology A3P600-2FG484 is a ProASIC3 Field Programmable Gate Array (FPGA) with 600K system gates, 110,592 bits of flash-based RAM, and 235 user I/Os, housed in a 484-ball FBGA package. It operates from a 1.5V core supply and supports system performance up to 310 MHz, making it a high-performance, low-density FPGA for a wide range of applications. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing to implement custom digital logic functions. FPGAs belong to the programmable logic device family, which sits between fixed-function ASICs and general-purpose processors. They offer reconfigurability, parallel processing, and rapid prototyping, making them essential in applications where flexibility and time-to-market are critical. The A3P600-2FG484 features flash-based configuration, which retains the design without external boot memory, providing instant-on capability and enhanced security. It includes 110,592 bits of embedded flash memory, 235 user I/Os, and four I/O banks with support for multiple voltage standards. The device is lead-free and RoHS compliant, and it is available in a 484-ball FBGA package with a 23x23 mm body. This FPGA is built on a 130nm CMOS process, offering a balance of performance and power efficiency. The ProASIC3 family is known for its low total cost of ownership, single-chip solution, and reprogrammability. The device supports in-system programming (ISP) and can be reprogrammed in the field, enabling design updates and secure key storage. Typical applications include industrial automation, automotive electronics, communications infrastructure, and aerospace systems. The 235 I/Os and 600K gates provide ample resources for implementing complex logic, interfacing with sensors and actuators, and handling communication protocols. The flash-based architecture ensures reliable operation in harsh environments. When designing with this FPGA, consider the I/O bank voltage requirements and the need for proper decoupling of the 1.5V core supply. The device supports multiple I/O standards, so configure each bank according to the interfacing voltage levels. Use the Microchip Libero SoC design suite for synthesis, place-and-route, and programming. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3P600-2FG484.

询价 联系我们
A3P600-2FGG144 - 600K Gate Flash FPGA 144-FBGA | Microchip
A3P600-2FGG144

A3P600-2FGG144 - 600K Gate Flash FPGA 144-FBGA | Microchip

The Microchip (Microsemi) A3P600-2FGG144 is a ProASIC3 flash-based Field Programmable Gate Array (FPGA) delivering 600,000 equivalent gates, 13,824 CLBs, and 97 user I/Os in a 144-ball Fine-Pitch Ball Grid Array (FBGA) package. The device operates at a 1.5V core voltage, supports system performance up to 310 MHz, and is fabricated on a 130 nm CMOS process. A flash FPGA is a programmable logic device that stores its configuration in on-chip nonvolatile flash memory rather than the volatile SRAM used by most mainstream FPGA families. Because the configuration is retained when power is removed, flash FPGAs power up instantly (Instant On), typically need no external configuration PROM or microcontroller for bitstream loading, and offer a single-chip solution with a smaller bill of materials within the broader hierarchy of programmable logic: FPGA -> flash FPGA -> ProASIC3 family -> A3P600 device. Key features of the A3P600 include nonvolatile flash fabric for security and instant-on operation, reprogrammability with no external boot device, low total cost of ownership (TOC), four I/O banks with independently supplied VCCIB rails supporting multiple voltage standards, and VersaTile architecture in which each tile can act as a three-input LUT, a D-flip-flop with enable, or a latch, maximizing fabric efficiency. The optional Soft ARM support in the ProASIC3 family allows embedded processor integration. Technically, the ProASIC3 third-generation flash architecture builds on the ProASICPLUS family, delivering higher density, higher performance, and lower power. Because the fabric is flash-based, there is no configuration data stream to intercept, improving design security versus SRAM FPGAs, and static power consumption is reduced since no SRAM configuration cells are held in every routing node. Typical applications include industrial control, secure embedded systems, bridge and interface logic, portable and low-power equipment, and ASIC prototyping where a single-chip, boot-free solution shortens time to market. When designing, note that I/O banks are supplied by dedicated VCCIBx pins: only I/O standards with compatible voltages may share a bank, and package VCCIBx pins route through the corresponding banks per the Microchip migration application note. This page synthesizes distributor sourcing channels, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
A3P600-2FGG144I - ProASIC3 600K-Gate FPGA 144-FBGA | Microchip
A3P600-2FGG144I

A3P600-2FGG144I - ProASIC3 600K-Gate FPGA 144-FBGA | Microchip

The Microchip Technology (Microsemi) A3P600-2FGG144I is a 600K-gate ProASIC3 flash-based FPGA operating at up to 310 MHz system performance, built on 130nm flash technology with a 1.5V core supply, housed in a 144-pin fine-pitch BGA (FBGA, 13x13 mm) package with 97 user I/Os. A flash-based FPGA is a field-programmable gate array whose configuration is stored in on-chip non-volatile flash cells rather than an external configuration ROM. Within the programmable-logic hierarchy (semiconductor -> programmable logic device -> FPGA -> flash FPGA), this architecture gives the ProASIC3 family single-chip, instant-on behavior and inherent security advantages over SRAM FPGAs, which must load their bitstream at every power-up. Key features of the A3P600-2FGG144I include 600,000 system gates (13,824 CLBs), 110,592 bits of embedded RAM, 97 user I/Os supporting single-ended standards, a 1.425V to 1.575V core supply range, and an industrial operating junction range of -40C to +100C. The -2 speed grade supports up to 310 MHz internal system performance. Low total cost of ownership comes from the single-chip solution, small 13x13 mm footprint, and reprogrammability without external configuration devices. Technically, ProASIC3 uses a sea-of-gates architecture of versatile logic elements with flash switches, so configuration data survives power cycling and cannot be easily read back, reducing cloning risk. Four I/O banks allow compatible I/O voltage standards to be grouped per bank, with VCCIBx pins routed per bank as described in Microchip migration application notes. Typical applications include industrial automation and motor control interfaces, aerospace and defense systems requiring secure instant-on logic, communications line cards, and medical instrumentation where the 144-FBGA footprint balances density and board area. Design consideration: assign only electrically compatible I/O standards to each of the four banks, and budget the 1.5V core rail for inrush during flash power-up. This page adds value beyond the datasheet by synthesizing distributor stock sources, same-package drop-in alternatives, comparison tables, and practical design notes in one place.

询价 联系我们
A3P600-2FGG256 - ProASIC3 Flash FPGA 600K Gates | Microchip
A3P600-2FGG256

A3P600-2FGG256 - ProASIC3 Flash FPGA 600K Gates | Microchip

The Microchip Technology (Microsemi) A3P600-2FGG256 is a ProASIC3 flash-based FPGA with 600K system gates, 177 user I/Os, and 110592 bits of embedded RAM, housed in a 256-ball Fine-Pitch Ball Grid Array (FBGA/LBGA) package. It operates from a 1.5V core supply at speeds up to 310 MHz in a commercial (-speed-grade -2) temperature profile. A flash-based FPGA is a field-programmable gate array whose configuration data is stored in on-chip flash memory rather than an external configuration device or volatile SRAM. Within the programmable-logic hierarchy, the A3P600 sits in the mid-density tier of the ProASIC3 family: FPGA -> flash FPGA -> ProASIC3 generation -> A3P600 device. Because the configuration is nonvolatile, the device powers up instantly as a single-chip solution with no boot PROM, no configuration controller, and no configuration-bitstream exposure during power-up. Key features include LiveStructure-style reprogrammability without an external configuration device, a 1.5V core for low dynamic power, four I/O banks supporting compatible voltage standards per bank, and support for common single-ended and differential I/O standards. The 177 available user I/Os in the 256-ball package give substantial routing headroom for bus-intensive designs, while the 110592-bit embedded RAM supports FIFOs and small datapath buffers. Architecturally, the ProASIC3 fabric is built on a 130nm flash process using a sea-of-VersaTiles mesh. VersaTiles are fine-grained logic cells that implement combinational and sequential functions with predictable timing; routing is handled by a hierarchical segmented structure. The -2 speed grade offers faster worst-case timing than the -1 grade, supporting system performance up to 310 MHz. Typical applications include industrial automation and motor-control interfaces, communications line-card glue logic and bridging, aerospace/defense subsystems requiring instant-on operation, and test and measurement instrumentation. The single-chip flash configuration makes it particularly attractive where BOM simplification and tamper-resistant bitstream storage matter. Designers should budget power by grouping I/O standards into the four banks, since VCCIBx supplies are bank-specific and only electrically compatible standards may share a bank, per the Microchip migration application note. Decouple each VCC/VCCIBx pin with low-ESR ceramics placed close to the balls. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
A3P600-2FGG256I - ProASIC3 600K FPGA | Microchip
A3P600-2FGG256I

A3P600-2FGG256I - ProASIC3 600K FPGA | Microchip

The Microchip Technology A3P600-2FGG256I is a flash-based ProASIC3 Field Programmable Gate Array (FPGA) with 600,000 system gates, 13,824 logic elements, 177 user I/O pins, and 110,592 bits of embedded RAM, supplied in a 256-ball FBGA package with a 1.5 V core supply. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured after manufacturing to implement arbitrary digital logic. FPGAs belong to the programmable logic device family and are used when a design requires flexibility, parallel processing, or fast time-to-market without the non-recurring engineering costs of an ASIC. The ProASIC3 family specifically uses non-volatile flash cells for configuration, meaning the device is live at power-up and does not require an external configuration PROM, unlike SRAM-based FPGAs. Key features of the A3P600-2FGG256I include 600K system gates, 177 single-ended or differential user I/Os, 110,592 bits of RAM, and a maximum internal frequency of 310 MHz according to family data. The -2 speed grade supports the highest performance tier in the ProASIC3 600K device. The device is built on a 130 nm process and operates from a nominal 1.5 V core supply with a recommended range of 1.425 V to 1.575 V. Four I/O banks allow flexible mixed-voltage I/O support, as noted in Microchip migration application notes. The A3P600-2FGG256I has an industrial temperature range of -40C to +100C, making it suitable for demanding environments. The FGG package suffix indicates a lead-free/RoHS-compliant 256-ball FBGA. Because ProASIC3 uses flash technology, the FPGA holds its configuration permanently without a boot ROM, and supports In-System Programming (ISP) through JTAG, simplifying field updates and reducing system BOM cost. Typical applications for the A3P600-2FGG256I include industrial automation controllers, communications infrastructure, aerospace and defense electronics, IoT edge gateways, medical instrumentation, and test-and-measurement systems. The 177 I/O pins, combined with 600K gates, provide an ideal balance for glue logic, bus interfaces, and small protocol bridges. When designing with this device, pay close attention to I/O bank supply voltages (VCCIBX) and decoupling. Because the device is flash-based, no configuration device is required, but the JTAG interface should be accessible for programming and boundary-scan testing. Use the Microchip Libero SoC software for design implementation and the Power Calculator early in the design cycle to plan thermal and power-supply margins. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a complete decision hub for the A3P600-2FGG256I.

询价 联系我们
A3P600-2FGG484I - ProASIC3 FPGA 600K 235 I/O | Microchip
A3P600-2FGG484I

A3P600-2FGG484I - ProASIC3 FPGA 600K 235 I/O | Microchip

The Microchip Technology A3P600-2FGG484I is a ProASIC3 flash-based field programmable gate array (FPGA) delivering 600,000 system gates with 235 user I/Os in a 484-ball Fine-Pitch Ball Grid Array (FGG484) package. The '-2' speed grade denotes 25% faster timing than the standard grade, and the 'I' suffix denotes the industrial operating temperature range. A flash-based FPGA is a type of programmable logic device that stores its configuration in on-chip non-volatile flash memory rather than the volatile SRAM used by most FPGA architectures. Within the programmable logic hierarchy, the ProASIC3 family sits as a mid-density, single-chip solution: FPGA -> flash FPGA -> programmable logic device -> semiconductor. Because configuration data is stored on-chip, ProASIC3 devices need no external configuration PROM, reduce bill-of-materials cost, and offer instant-on operation at power-up with inherent resistance to configuration corruption. Key features include single-chip, low total-cost-of-ownership operation, reprogrammability in-system, support for low-power modes, and a rich I/O capability of 235 user I/Os in the 484-ball package. The device contains 110592 bits of on-chip resources as listed in distributor data, and the ProASIC3 fabric supports common single-ended and differential I/O standards for system integration. Architecturally, the ProASIC3 fabric is built from a sea-of-gates array of versatile logic elements with flash switches, so no configuration loading time or volatile configuration memory is required. Microchip (formerly Microsemi and Actel) documents in its migration application note that A3P600 devices use four I/O banks with dedicated VCCIBx bank supplies, allowing only electrically compatible I/O standards to share a bank. Typical applications include industrial automation controllers, communications and networking line cards, medical instrumentation, aerospace subsystems, and test equipment, where instant-on, secure, single-chip programmable logic is valued. A key design consideration is I/O bank planning: assign I/O standards to banks by voltage compatibility before floorplanning, since VCCIBx supplies are bank-specific. This page synthesizes distributor pricing, drop-in same-footprint alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
A3P600-2PQ208I - 600K Gate ProASIC3 FPGA | Microchip
A3P600-2PQ208I

A3P600-2PQ208I - 600K Gate ProASIC3 FPGA | Microchip

The Microchip Technology A3P600-2PQ208I is a ProASIC3 Field Programmable Gate Array (FPGA) offering 600,000 system gates and 110,592 bits of RAM, housed in a 208-pin PQFP (28x28 mm) package. This device delivers high performance with a system performance of up to 350 MHz, making it suitable for a wide range of mid-density logic applications. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer or designer after manufacturing. Unlike fixed-function ASICs, FPGAs contain an array of programmable logic blocks and interconnects that can be programmed to implement complex digital functions. FPGAs are part of the broader category of programmable logic devices (PLDs), which also includes CPLDs and SoC FPGAs. They are essential in applications requiring flexibility, rapid prototyping, and field upgrades. Key features of the A3P600-2PQ208I include 600,000 system gates, 110,592 bits of RAM, and 154 user I/O pins. It operates from a 1.5V core supply with 3.3V, 2.5V, and 1.8V I/O support, and is available in a 208-pin PQFP package. The device is flash-based, providing non-volatile configuration that is instantly available on power-up, eliminating the need for external configuration memory. It also supports reprogrammability, allowing design updates in the field. Technically, the ProASIC3 family uses a flash-based architecture that combines the benefits of ASIC and FPGA technologies. The flash switches provide low power consumption, high security, and immunity to radiation-induced configuration upsets. The device includes four I/O banks with dedicated VCCIBx supplies, enabling mixed-voltage I/O standards. The A3P600-2PQ208I is part of the ProASIC3 family, which offers a single-chip solution with low total cost of ownership. Typical applications include industrial control, automotive electronics, communications infrastructure, and consumer electronics. The device is well-suited for glue logic, bus interfacing, and custom logic implementations where mid-density logic and reprogrammability are required. Its 154 I/O pins provide ample connectivity for peripheral interfaces. When designing with this device, consider the I/O bank voltage requirements and ensure proper decoupling of the core and I/O supplies. The flash-based architecture requires no configuration device, simplifying the board design. For high-speed designs, pay attention to signal integrity and use the device's programmable I/O standards to match the interface requirements. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3P600-2PQ208I.

询价 联系我们
A3P600-2PQG208 - ProASIC3 FPGA 600K Gates 154 I/O | Microchip
A3P600-2PQG208

A3P600-2PQG208 - ProASIC3 FPGA 600K Gates 154 I/O | Microchip

The Microchip Technology (formerly Microsemi/Actel) A3P600-2PQG208 is a ProASIC3 family flash-based FPGA with 600K system gates, 154 user I/Os, and 110592 bits of configuration flash, housed in a 208-pin BFQFP (PQG208) package operating at a 1.5V core voltage with a maximum system performance of 310 MHz. A field-programmable gate array (FPGA) is a semiconductor device containing programmable logic blocks and interconnects that designers configure to implement custom digital circuits. Unlike SRAM-based FPGAs, the ProASIC3 family uses flash memory cells for configuration, so it is a single-chip, non-volatile solution that requires no external boot PROM and powers up instantly with live-at-power-up operation. Key features include flash-based reprogrammability with low total cost of ownership, single-chip integration without external configuration memory, four I/O banks supporting multiple voltage standards, and the speed grade -2 with 310 MHz system performance. The 130nm flash process enables secure, low-power operation suitable for radiation-tolerant-adjacent and secure designs. Architecturally, the A3P600 provides VersaTiles (fine-grained logic tiles), embedded memory blocks for FIFOs and dual-port RAM, and abundant advanced features such as on-chip debugging support through SoftConsole and Libero design tools. Four I/O banks allow only electrically compatible I/O standards to share a bank, per the Microchip migration application note. Typical applications include industrial control, communications equipment, medical instrumentation, aerospace subsystems, and secure embedded systems where instant-on, single-chip FPGA operation is required. A key design consideration: I/O bank assignment must respect VCCIBx compatibility; only I/Os with compatible voltage standards may share a bank, so plan I/O placement early in the design flow. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
A3P600-2PQG208I - ProASIC3 FPGA 600K Gates 208-QFP | Microchip
A3P600-2PQG208I

A3P600-2PQG208I - ProASIC3 FPGA 600K Gates 208-QFP | Microchip

The Microchip Technology A3P600-2PQG208I is a flash-based FPGA from the ProASIC3 family offering 600,000 system gates (approximately 7,000 logic elements), up to 310 MHz system performance, and 154 user I/Os in a 208-pin PQFP (208-BFQFP) package with gull-wing leads. Built on a 130nm CMOS process and powered from a 1.5V core, this industrial-temperature-grade device is a single-chip, nonvolatile, reprogrammable solution. A flash-based FPGA is a field-programmable gate array whose configuration is stored in on-chip flash memory rather than an external configuration device. Within the programmable logic hierarchy, the ProASIC3 sits in the mainstream FPGA tier below high-end SRAM-based FPGAs, functioning as a system-level programmable logic IC. Because the configuration is nonvolatile, the A3P600 powers up instantly without a boot PROM, improving board reliability and reducing bill-of-materials cost. Key features include low total cost of ownership, single-chip operation, secure flash-based configuration, and four I/O banks that allow pins with compatible voltage standards to share a bank supply (VCCIBx). The -2 speed grade provides the second-fastest timing grade in the family, and the 'I' suffix denotes the industrial temperature grade for extended-environment deployment. Architecturally, the device uses ProASIC3 VersTiles arranged in a sea-of-tiles fabric with embedded flash switching elements, supporting a broad range of LVTTL/LVCMOS I/O standards with bank-selectable I/O voltages. Design entry and implementation use Microchip (formerly Actel/Microsemi) Libero SoC design tools, allowing RTL (Verilog/VHDL) synthesis through flash programming via JTAG. Typical applications include industrial automation control, glue logic integration and board-level consolidation, communications and networking line cards, medical instrumentation, and aerospace/defense systems requiring nonvolatile, single-chip programmable logic. Design consideration: verify I/O bank voltage assignments early, because only I/Os with compatible voltage standards may share a VCCIBx bank, and migration between A3P400/A3P600/A3P1000 densities depends on bank-routed supply pins. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
A3P600-FG144 - 600K Gate Flash FPGA | Microchip Technology
A3P600-FG144

A3P600-FG144 - 600K Gate Flash FPGA | Microchip Technology

The Microchip Technology A3P600-FG144 is a flash-based Field Programmable Gate Array (FPGA) from the ProASIC3 family, offering 600,000 system gates, 231 MHz maximum internal frequency, and 97 user I/Os in a 144-ball FBGA package. It operates from a 1.5V core supply and is built on a 130-nm, 7-layer metal (6 copper) flash-based CMOS process, providing instant-on, low-power, and secure non-volatile operation. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement custom digital logic functions. FPGAs belong to the broader category of programmable logic devices (PLDs), which sit between fixed-function ASICs and general-purpose processors in the digital logic hierarchy. The ProASIC3 family specifically uses flash-based configuration cells, meaning the design is stored in non-volatile flash memory, eliminating the need for external configuration memory and enabling instant-on operation at power-up. Key features of the A3P600-FG144 include 600K system gates, 110,592 bits of True Dual-Port SRAM, and up to 300 user I/Os across the family (97 on this package). It supports multiple I/O standards including LVCMOS, LVTTL, PCI, and LVDS, with four I/O banks that have dedicated supply voltages. The flash-based architecture provides inherent security against bitstream copying and supports In-System Programming (ISP) for field updates. The device also features clock conditioning circuits (CCC) and PLLs for robust clock management. Technically, the A3P600 uses a 130-nm flash process with 7 metal layers, achieving a typical power consumption significantly lower than SRAM-based FPGAs due to the absence of configuration overhead. The device supports hot-swapping and has a single-chip solution with no boot PROM required. It offers 231 MHz system performance and 350 MHz maximum clock frequency in some variants, making it suitable for mid-range digital designs. Typical applications include industrial control, automotive electronics, communications infrastructure, and consumer electronics where low power, instant-on, and security are critical. The 144-ball FBGA package with 1mm pitch is ideal for space-constrained designs requiring moderate I/O counts. When designing with this device, ensure proper decoupling of the 1.5V core supply and each VCCIBx bank supply. The flash-based configuration retains the design even without power, but careful power sequencing is recommended to avoid I/O contention during power-up. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a comprehensive resource for engineers evaluating the A3P600-FG144.

询价 联系我们
A3P600-FG144I - 600K Gate ProASIC3 FPGA | Microchip
A3P600-FG144I

A3P600-FG144I - 600K Gate ProASIC3 FPGA | Microchip

The Microchip Technology A3P600-FG144I is a flash-based FPGA from the ProASIC3 family, offering 600,000 system gates, 13,824 logic elements (CLBs), and a maximum operating frequency of 350 MHz. It is housed in a 144-ball FBGA package with 1 mm pitch, providing 97 user I/Os. This device operates from a 1.5V core supply and supports an industrial temperature range of -40°C to +100°C, making it suitable for demanding embedded applications. A Field-Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing to implement custom digital logic functions. Unlike fixed-function ASICs, FPGAs offer reconfigurability, allowing designers to iterate on designs without the cost and lead time of custom silicon. The ProASIC3 family is part of the broader FPGA category, which also includes SRAM-based FPGAs from competitors like Xilinx and Intel. Flash-based FPGAs like the A3P600 retain their configuration even when power is removed, providing instant-on capability and enhanced security against reverse engineering. Key features of the A3P600-FG144I include its flash-based non-volatile configuration, which eliminates the need for external boot memory and reduces system complexity. It offers 600,000 system gates, 13,824 CLBs, and 97 user I/Os, with support for multiple I/O standards including LVCMOS, LVTTL, and PCI. The device also includes up to 108 Kbits of embedded RAM, PLLs for clock management, and a secure programming mode. Its low power consumption and single-chip solution make it ideal for cost-sensitive applications. From a technical perspective, the A3P600 is built on a 130 nm flash process, providing a balance of performance and power efficiency. The flash-based architecture allows for live updates and secure in-system programming, which is critical for field-upgradeable systems. The device supports JTAG (IEEE 1149.1) for boundary-scan testing and programming, and it is compatible with Microchip's Libero SoC design suite, which includes synthesis, simulation, and place-and-route tools. Typical applications for the A3P600-FG144I include industrial control systems, automotive electronics, communications infrastructure, and aerospace/defense systems. Its instant-on capability and high reliability make it well-suited for safety-critical applications where immediate operation is required after power-up. The 97 I/Os and 144-ball package allow for compact PCB designs with moderate pin count requirements. When designing with this FPGA, consider the 1.5V core supply and ensure adequate decoupling capacitors are placed near the power pins. The device supports multiple I/O banks with independent voltage supplies, enabling mixed-voltage systems. For high-speed designs, pay attention to signal integrity and use the on-chip PLLs to generate clean clock signals. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a comprehensive resource for engineers evaluating the A3P600-FG144I.

询价 联系我们
A3P600-FG256I - ProASIC3 FPGA, 600K Gates | Microchip Technology
A3P600-FG256I

A3P600-FG256I - ProASIC3 FPGA, 600K Gates | Microchip Technology

The Microchip Technology A3P600-FG256I is a ProASIC3 flash-based Field Programmable Gate Array (FPGA) with 600K system gates, 13,824 VersaTiles (approximately 7K logic elements), 177 user I/O, and 110,592 RAM bits, supplied in a 256-pin FBGA (LBGA-256) package. It operates from a 1.5 V core supply, enabling single-chip, reprogrammable logic for mid-density industrial and communications applications. What is a Field Programmable Gate Array? An FPGA is a semiconductor device containing configurable logic blocks and programmable interconnects that can be reconfigured after manufacturing to implement arbitrary digital logic. Unlike fixed-function ASICs, FPGAs allow in-system design changes and rapid prototyping. Microchip's ProASIC3 family uses nonvolatile flash-based configuration, meaning the FPGA retains its programming without an external boot PROM while still being reprogrammable. The A3P600-FG256I sits in the FPGA -> programmable logic -> integrated circuit hierarchy and is often selected for applications requiring secure IP protection, flexible I/O, and low total cost of ownership. Key features of the A3P600-FG256I include 600K system gates, 13,824 VersaTiles, 177 user I/O, 110,592 RAM bits, a 1.5 V core supply, and a 17 x 17 mm 256-ball FBGA package with 1 mm pitch. The flash-based architecture provides nonvolatile configuration, in-system programmability, and a small footprint for mid-density logic designs. According to Mouser, the device is categorized as a 7KLEs ProASIC3 FPGA, and DigiKey confirms the 177 I/O and 110,592 RAM bit organization. Technically, the ProASIC3 architecture uses a proprietary VersaTile structure that can be configured as a three-input lookup table or a D-flip-flop with enable, giving designers efficient implementation of combinational and sequential logic. The 256-LBGA package balances I/O count and board area while offering a standard 1.5 V core voltage. The device is in-system programmable, and its flash configuration simplifies power-up sequencing because no external configuration device is required. Arrow lists the device as a 600K-gate FPGA with 231 MHz system performance, while other listings cite 350 MHz; designers should verify the exact speed grade against the latest datasheet. Typical applications for the A3P600-FG256I include industrial automation, motor control, wired communications, medical device signal processing, and IoT edge gateways. Its 177 user I/O and 110K-bit embedded RAM support bus interfaces, state machines, and digital signal processing functions. The industrial temperature suffix (I) makes it suitable for harsh operating environments. The flash-based architecture also reduces system cost by eliminating external PROMs and simplifies field updates. When designing with the A3P600-FG256I, pay careful attention to power supply decoupling, BGA thermal management, and I/O bank voltage assignments. Because the device is flash-based, no external configuration device is required, which saves board space and reduces boot time. Sufficient VCC and ground plane stitching under the 256-ball package is essential for reliable operation, especially at higher I/O toggle rates. This page synthesizes distributor pricing, drop-in package variants, practical design notes, a comparison table, and AEO-optimized FAQ content that goes beyond the raw manufacturer datasheet. It is intended to help engineers quickly evaluate the A3P600-FG256I against other ProASIC3 family members and make a confident selection for new designs.

询价 联系我们
A3P600-FG484 - ProASIC3 600K-Gate Flash FPGA, 484-BGA | Microchip
A3P600-FG484

A3P600-FG484 - ProASIC3 600K-Gate Flash FPGA, 484-BGA | Microchip

The Microchip (Microsemi) A3P600-FG484 is a 600,000-gate ProASIC3 flash-based FPGA with up to 235 user I/Os, a 231 MHz system performance rating, and 130 nm 7-layer metal flash process technology, housed in a 484-pin Fine-Pitch Ball Grid Array (FBGA, 23x23 mm) operating at a 1.5 V core supply. A flash-based FPGA stores its configuration in on-chip flash cells rather than the SRAM lookup tables used by Xilinx or Intel (Altera) devices. Because configuration is non-volatile, the A3P600 powers up instantly with no external boot PROM, no configuration controller, and no bitstream exposure during power-up - a major advantage for security-sensitive and high-reliability systems. In the programmable logic hierarchy, the A3P600 sits in the mid-density tier of the ProASIC3 family, above the A3P250 and below the A3P1000. Key features include single-chip, single-voltage operation (1.425 V to 1.575 V core), support for optional soft ARM Cortex-M1 processor cores, abundant 18-kbit embedded block SRAM, and reprogrammability without a separate configuration device. The flash fabric also delivers inherently low static power and better SEU robustness than SRAM-based competitors. Architecturally, the device is built from VersaTiles - a fine-grained logic tile that can act as a three-input LUT, a D-flip-flop, or a latch with enable - interconnected by segmented routing. Clock resources support multiple PLLs and clock-conditioning circuits for source-synchronous interfaces up to 231 MHz. Typical applications include industrial automation controllers, medical instrumentation, military/aerospace subsystems (where the related RTAX radiation-tolerant family is used), communications bridging, and secure embedded systems requiring instant-on, tamper-resistant configuration storage. Design consideration: the 484-FBGA requires careful power-plane design at 1.5 V and attention to simultaneously switching output (SSO) limits; consult the Microchip ProASIC3/E SSO and Pin Placement Guidelines when assigning high-drive I/O banks. This page synthesizes distributor pricing, drop-in same-footprint alternatives, design notes, and AEO-optimized FAQs not consolidated in the manufacturer datasheet.

询价 联系我们
A3P600-FG484I - 600K Gate Flash FPGA, 231MHz | Microchip
A3P600-FG484I

A3P600-FG484I - 600K Gate Flash FPGA, 231MHz | Microchip

The Microchip A3P600-FG484I is a flash-based FPGA from the ProASIC®3 family, offering 600K system gates, a maximum operating frequency of 231MHz, and 235 user I/Os in a 484-pin FBGA package. It operates from a 1.5V core supply and is built on 130nm flash technology, providing a single-chip, reprogrammable solution with instant-on capability and inherent security. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement arbitrary digital logic functions. Unlike microcontrollers or ASICs, FPGAs contain a fabric of programmable logic blocks and interconnects, allowing designers to create custom hardware without the cost and lead time of a custom chip. The ProASIC3 family uses flash-based configuration cells, which retain their programming even when power is removed, enabling instant-on operation and eliminating the need for external boot memory. Key features of the A3P600-FG484I include 600K system gates, 231MHz system performance, 235 user I/Os, and 1.5V core operation. The flash-based architecture provides non-volatile configuration, low power consumption, and high security against reverse engineering. The device supports up to 128K bits of flash memory for user data and includes advanced clock management with up to 6 PLLs, enabling robust timing control for complex designs. The ProASIC3 architecture uses a VersaTile core that can be configured as either a three-input lookup table (LUT) or a D-flip-flop/latch with enable, providing efficient use of the FPGA fabric. The 130nm flash process delivers a balance of performance and power, with low static power consumption ideal for battery-powered and thermally constrained applications. The device supports multiple I/O standards including LVCMOS, LVTTL, and differential standards, offering design flexibility. Typical applications for the A3P600-FG484I include industrial control, automotive electronics, communications infrastructure, and aerospace systems where reliability, security, and instant-on operation are critical. Its non-volatile configuration makes it suitable for safety-critical applications that require immediate functionality upon power-up without external configuration devices. When designing with this device, consider the 1.5V core supply requirement and ensure adequate decoupling on all power pins. The flash-based configuration eliminates the need for a configuration PROM, simplifying board design and reducing BOM cost. For high-speed I/O, follow the manufacturer's layout guidelines for signal integrity and use the integrated PLLs for clock management. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3P600-FG484I in their designs.

询价 联系我们
A3P600-FGG144 - 600K-Gate ProASIC3 Flash FPGA | Microchip
A3P600-FGG144

A3P600-FGG144 - 600K-Gate ProASIC3 Flash FPGA | Microchip

The Microchip Technology A3P600-FGG144 is a 600,000-gate ProASIC3 flash-based FPGA with 97 user I/Os, 13,824 CLBs, and 110592 bits of configuration flash memory, housed in a 144-ball Fine-Pitch Ball Grid Array (FBGA/LBGA) package. As a member of the third-generation ProASIC3 family originally developed by Actel and now part of Microchip, it delivers ASIC-level integration with a single-chip, nonvolatile, Instant-On solution. A flash-based FPGA (field-programmable gate array) stores its configuration in on-chip flash cells rather than SRAM, eliminating the need for an external boot PROM and greatly improving design security. Within the programmable logic hierarchy, the A3P600 sits in the mid-density tier of the ProASIC3 family, above the A3P250 and below the A3P1000, and belongs to the broader category of programmable logic devices that also includes CPLDs and antifuse FPGAs. Key features include nonvolatile flash programming for a true single-chip solution, reprogrammability with no external configuration device, low total cost of ownership as highlighted by Microchip, and a compact 144-ball footprint with 1.00 mm ball pitch suitable for surface-mount assembly. The device provides 97 usable I/Os distributed across four I/O banks whose VCCIBx supplies are bank-independent, allowing mixed-voltage I/O standards on one package. Architecturally, the ProASIC3 fabric consists of VersaTiles implementing sequential or combinable logic, supported by embedded flash blocks for on-chip nonvolatile storage. Optional soft ARM capability in the family enables embedded processor designs on the same fabric. CMOS flash technology yields low static power versus SRAM FPGAs of similar density. Typical applications include industrial control, motor drive interface logic, bridging and glue logic consolidation, secure single-chip designs where bitstream theft is a concern, and portable or battery-powered systems benefiting from low standby power. Design consideration: assign I/Os bank-aware, since only I/Os with compatible voltage standards may share a VCCIBx bank, per the Microchip migration application note. This page synthesizes distributor pricing, drop-in same-package alternatives from the ProASIC3 family, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
A3P600-FGG144I - 600K Gate ProASIC3 FPGA | Microchip
A3P600-FGG144I

A3P600-FGG144I - 600K Gate ProASIC3 FPGA | Microchip

The Microchip Technology A3P600-FGG144I is a flash-based field-programmable gate array (FPGA) from the ProASIC3 family, offering 600,000 system gates, 110,592 bits of RAM, and 97 user I/Os in a 144-pin FBGA (FGG144) package. It operates at a core voltage of 1.5V and supports system performance up to 231 MHz, making it suitable for a wide range of low-power, high-reliability applications. A field-programmable gate array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing to implement custom digital logic functions. Unlike fixed-function ASICs, FPGAs offer reprogrammability, rapid prototyping, and lower non-recurring engineering costs. The ProASIC3 family uses flash-based configuration cells, providing non-volatile storage of the design, instant-on capability, and immunity to single-event upsets (SEU) in radiation environments, which is a key advantage over SRAM-based FPGAs that require external configuration memory. Key features of the A3P600-FGG144I include 600K system gates, 110,592 bits of RAM, 97 user I/Os, and support for up to 231 MHz system performance. It operates from a 1.5V core supply and is available in a lead-free, RoHS-compliant 144-pin FBGA package. The device also supports multiple I/O standards, including LVCMOS, LVTTL, and PCI, and includes phase-locked loops (PLLs) for clock management. Its flash-based architecture provides secure, low-power operation with instant-on capability, eliminating the need for external boot memory. Technically, the A3P600-FGG144I is fabricated using a 130nm flash process, which balances performance and power consumption. The device integrates 13,824 logic modules (tiles) and 110,592 bits of RAM, organized as 1,536 words of 72 bits each. It includes up to 3 PLLs and supports various I/O standards. The flash-based configuration cells are reprogrammable, allowing design updates in the field. The device also features advanced security to prevent unauthorized readback, making it suitable for IP protection. Typical applications include industrial automation, automotive electronics, communications infrastructure, and aerospace systems. In industrial automation, the A3P600-FGG144I can implement motor control, sensor interfacing, and real-time processing. In automotive, it supports infotainment, driver assistance, and body control modules. Its low power and instant-on capability make it ideal for battery-powered and safety-critical systems. When designing with this device, ensure proper power supply decoupling with 0.1uF and 10uF capacitors near the VCC and GND pins. The core voltage must be regulated to 1.5V ±5%. For I/O banks, follow the recommended termination and voltage levels for the chosen I/O standard. Use the Microchip Libero SoC design suite for synthesis, place-and-route, and programming. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3P600-FGG144I.

询价 联系我们
A3P600-FGG256 - 600K Gate ProASIC3 FPGA | Microchip Technology
A3P600-FGG256

A3P600-FGG256 - 600K Gate ProASIC3 FPGA | Microchip Technology

The Microchip Technology A3P600-FGG256 is a 600,000 system-gate ProASIC3 flash Field Programmable Gate Array (FPGA) with 177 user I/Os, 110,592 total RAM bits, and a maximum system frequency of 231 MHz, housed in a 256-ball FBGA (17x17 mm) package. This single-chip, instant-on FPGA operates from a 1.5V core supply and supports commercial temperature operation from 0°C to 85°C. A Field Programmable Gate Array (FPGA) is a semiconductor device containing configurable logic blocks and programmable interconnects that can be configured after manufacturing to implement arbitrary digital logic. In the programmable logic taxonomy, FPGA sits within the broader family of programmable logic devices; ProASIC3 is Microchip's flash-based FPGA family. Unlike SRAM-based FPGAs, ProASIC3 stores its configuration in nonvolatile flash cells, enabling instant-on operation without external boot memory. This architecture improves system reliability, reduces bill-of-materials count, and provides inherent bitstream security. Key features of the A3P600-FGG256 include nonvolatile flash configuration with instant-on capability, 600K system gates, 177 user I/Os, 110,592 RAM bits, 231 MHz system performance, and a 1.425V-1.575V supply range. The device is RoHS3 compliant and lead-free, and it is supplied in a 256-FPBGA package with a 17x17 mm body and 1.00 mm ball pitch. The four I/O banks with dedicated VCCIB supplies allow flexible voltage-standard mixing on the same device. The ProASIC3 family is built on a flash-based CMOS process, combining ASIC-like unit cost with full reprogrammability. The device integrates dedicated clock conditioning PLLs and embedded memory resources. According to Microchip's ProASIC3 migration application note, A3P400, A3P600, and A3P1000 devices share four I/O banks and dedicated bank supplies, which simplifies board design when moving between densities in the same 256-ball package. The flash architecture also provides design security and low dynamic power density. Typical applications include industrial automation and motor control, communications protocol bridging, medical signal processing, aerospace and defense secure processing, smart energy monitoring, and ASIC replacement. The 177 user I/Os and instant-on behavior make the A3P600-FGG256 suitable for high-reliability systems where external configuration devices are undesirable or where fast startup is critical. When designing with this FPGA, pay careful attention to 1.5V core supply decoupling and to each I/O bank's VCCIB voltage. Use Microchip's power management guidelines, and verify pin compatibility when migrating between ProASIC3 densities using the same 256-FPBGA footprint. For industrial-temperature environments, select the A3P600-FGG256I variant. This page synthesizes distributor inventory, estimated pricing, drop-in alternatives from the same ProASIC3 family, and practical design notes not found in the manufacturer datasheet, giving engineers a complete cross-reference resource for the A3P600-FGG256.

询价 联系我们
A3P600-FGG256I - ProASIC3 Flash FPGA 600K Gates | Microchip
A3P600-FGG256I

A3P600-FGG256I - ProASIC3 Flash FPGA 600K Gates | Microchip

The Microchip Technology (formerly Microsemi/Actel) A3P600-FGG256I is a 600K-system-gate ProASIC3 flash-based FPGA with 13,824 registers, 110,592 bits of embedded RAM, 177 user I/Os, and a maximum system performance of 231 MHz, fabricated on a 130nm process and housed in a 256-ball Fine-Pitch Ball Grid Array (FBGA) package rated for the industrial temperature range of -40C to +85C. A flash-based FPGA is a field-programmable gate array whose configuration is stored in on-chip flash memory cells rather than SRAM, allowing single-chip, instant-on operation without an external configuration device. Within the programmable logic hierarchy, the A3P600 sits in the mid-density tier of the ProASIC3 family, above the A3P400 and below the A3P1000. Key features include nonvolatile flash programming that eliminates the boot-time and security exposure of SRAM FPGAs, four I/O banks with independently configurable VCCIBx supplies supporting mixed-voltage systems, 1.5V core operation for low dynamic power, and reprogrammability for in-field updates. Low total cost of ownership (TOC) is a stated family pillar on the Microchip product page. Architecturally, ProASIC3 uses a sea-of-gates fabric of versatile logic elements and embedded flash switches, delivering deterministic, ASIC-like security because the bitstream is stored invisibly in flash and cannot be read back. The 130nm process balances density, cost, and power, while the 231 MHz ceiling supports real-time signal processing and glue-logic consolidation. Typical applications include industrial automation controllers, communications line cards, real-time signal processing, custom hardware acceleration, and secure single-chip logic replacement in aerospace-adjacent industrial systems, where instant-on startup and configuration security are decisive. A key design consideration: assign I/O standards with compatible voltage levels to the same VCCIBx bank, because bank supplies are dedicated and cannot be mixed within a bank, per Microchip migration application notes. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing information gain for engineers evaluating the ProASIC3 family.

询价 联系我们
A3P600-FGG484 - 600K Gate ProASIC3 FPGA | Microchip
A3P600-FGG484

A3P600-FGG484 - 600K Gate ProASIC3 FPGA | Microchip

The Microchip (Microsemi) A3P600-FGG484 is a flash-based ProASIC3 family FPGA with 600K system gates, a system performance of 231 MHz, and 235 user I/Os, housed in a 484-ball Fine-Pitch Ball Grid Array (FBGA) package and operating from a 1.5V core supply on a 130nm process. A field-programmable gate array (FPGA) is a semiconductor device containing a fabric of configurable logic blocks, routing resources, and I/O cells that designers program to implement custom digital circuits. Unlike SRAM-based FPGAs, the ProASIC3 family uses flash-based configuration cells, meaning the device is non-volatile, single-chip (no external boot configuration device is required), and instant-on at power-up. Within the programmable logic hierarchy, the A3P600 sits between the smaller A3P400 and the larger A3P1000 in the ProASIC3 family. Key differentiating specifications include 600K system gates in the ProASIC3 fabric, 235 user I/Os on the 484-pin FBGA, a maximum system frequency of 231 MHz, and support for embedded soft processors in the Microchip/Microsemi tool flow. The flash-based fabric delivers low total cost of ownership by eliminating the external configuration flash, reducing bill-of-materials cost and board area while improving system security because the bitstream is stored on-chip. Technically, the A3P600 is built on a 130nm CMOS process with a 1.5V core. The VersaTile-based architecture allows each tile to be used as a lookup table, flip-flop, or embedded memory element, giving designers fine-grained flexibility. On-chip flash and RAM blocks support FIFOs and buffering in data-path designs. Typical applications include industrial control and automation, medical instrumentation, military and aerospace subsystems (in industrial temperature variants), communication bridging, and secure single-chip logic integration where instant-on operation is required. Design consideration: plan I/O banking and power supply sequencing early, as the FBGA package limits rework options; verify availability of the non-automotive commercial temperature grade before finalizing sourcing. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们