微控制器

产品（20,000+)

MC8641DTVU1000GE557 - PowerPC e600 1GHz 2-Core MPU | NXP
MC8641DTVU1000GE557

MC8641DTVU1000GE557 - PowerPC e600 1GHz 2-Core MPU | NXP

The NXP MC8641DTVU1000GE557 is a dual-core PowerPC e600 microprocessor running at 1.0 GHz, housed in a 1023-ball FCCBGA (33x33) package with 1.05 V core supply. It belongs to the MPC86xx family and integrates two 32-bit e600 cores with AltiVec vector processing, integrated DDR1/DDR2 memory controller, and high-speed serial interfaces. The part is shipped as a tray (bulk) variant per the supplier suffixes used in the part number. A microprocessor (MPU) is the central processing unit of an embedded system, executing operating systems, control code, and signal-processing workloads. The MC8641 family sits within the PowerPC architecture lineage that NXP (formerly Freescale) has produced for telecom, networking, and aerospace applications. Within the system hierarchy, an MPU integrates core CPU execution, cache, memory control, and peripheral I/O on a single die, distinguishing it from microcontrollers (MCU) that emphasize on-chip flash and peripherals. Key specifications of the MC8641DTVU1000GE557 include dual 32-bit PowerPC e600 cores, 1.0 GHz core frequency, 1.05 V core voltage, integrated DDR1/DDR2 memory controller, dual GbE, PCI Express, and Serial RapidIO interfaces, and an operating temperature range up to 105 °C. The 1023-ball FCCBGA package provides high pin density required for the multi-channel memory and serial I/O interfaces. The architecture combines dual superscalar e600 cores with on-chip L1/L2 caches and AltiVec SIMD engine, supporting parallel workloads in networking and signal processing. Hardware-assisted coherency between cores is handled through on-die logic, and the integrated memory controller reduces system latency by removing external northbridge components. Typical applications include high-performance networking equipment, telecom baseband processing, industrial control, military and aerospace embedded computing, and data-acquisition systems. The combination of dual-core processing, AltiVec acceleration, and high-speed serial interfaces makes it suitable for line-card designs and protocol-offload engines. When designing with this device, ensure proper thermal management for the FCCBGA - the high pin count combined with multi-watt dissipation requires a multi-layer PCB with adequate copper and thermal vias. Validate DDR signal integrity through the routing guidelines in the manufacturer hardware reference manual before committing to layout. This page synthesizes distributor availability, parametric data, and substitute guidance for the MC8641DTVU1000GE557, consolidating information not available in any single manufacturer document.

询价 联系我们
MC8641DVJ1333JE - Dual e600 SoC, 2x1333 MHz, Rev 3 | NXP Semiconductors
MC8641DVJ1333JE

MC8641DVJ1333JE - Dual e600 SoC, 2x1333 MHz, Rev 3 | NXP Semiconductors

The NXP Semiconductors MC8641DVJ1333JE is a 32-bit Power Architecture system-on-chip (SoC) featuring two e600 superscalar cores running at 1333 MHz, integrated memory and I/O controllers, and a 1023-ball FCCBGA package measuring 33x33 mm. It belongs to the MPC8641D family (Rev 3 silicon) and targets high-performance embedded compute applications that require multi-core PowerPC processing, DDR1/DDR2 memory, Gigabit Ethernet, PCI Express, and Serial RapidIO on a single die. What is a Power Architecture SoC? A Power Architecture SoC integrates one or more PowerPC CPU cores with memory controllers, high-speed serial interfaces, and peripheral IP onto a single chip. The e600 core uses the Power Architecture Book E instruction set, extends it with AltiVec SIMD, and is widely deployed in networking, storage, defense, and industrial embedded applications where deterministic performance and long-term software reuse matter more than raw peak clock speed. Within the broader taxonomy, MC8641DVJ1333JE sits as: e600 core -> PowerPC MPC86xx dual-core SoC -> 32-bit Power Architecture SoC -> embedded microprocessor -> integrated circuit. Key device-level features include dual e600 cores at 1333 MHz with AltiVec SIMD, a 7-stage superscalar pipeline with three-issue dispatch, an integrated DDR1/DDR2 memory controller with ECC, dual Gigabit Ethernet MACs, PCI Express interface, Serial RapidIO (SRIO), and an operating temperature range of 0°C to +105°C for industrial-grade environments. The 1023-ball FCCBGA package exposes the full high-speed I/O complement while preserving signal integrity for multi-gigabit SerDes lanes. Architecturally, the MPC8641D pairs two e600 cores with a shared L2 cache topology and a coherent fabric, enabling symmetric multiprocessing (SMP) on a single chip. Hardware virtualization helpers and a dedicated DMA engine accelerate packet processing in networking line cards, while AltiVec boosts DSP-class workloads such as voice transcoding, image manipulation, and cryptographic primitives in software. Compared with discrete CPU-plus-chipset designs, this SoC consolidates the memory controller and I/O bridge on-die, reducing board area, BOM cost, and power envelope for embedded platforms. Typical applications include multi-service routers and switches (PCIe to SRIO fabric bridging), industrial automation controllers running VxWorks or Linux, military/aerospace compute modules requiring long-life silicon, RAID/NAS storage controllers with AltiVec-accelerated RAID parity, and defence-grade signal processing cards. The dual-core 1333 MHz configuration handles wire-speed packet inspection, encryption, and control-plane workloads on a single board. When designing with this device, ensure the PCB supports 1023-ball BGA routing with matched-length SerDes lanes for PCI Express and Serial RapidIO. Provide adequate decoupling and thermal dissipation - the FCCBGA package requires a heatsink or cold plate under sustained load. Use NXP's board-support packages (BSP) and U-Boot for early bring-up.

询价 联系我们
MC8641DVU1000GE - Dual 1GHz e600 SoC, 1023-FCBGA | NXP
MC8641DVU1000GE

MC8641DVU1000GE - Dual 1GHz e600 SoC, 1023-FCBGA | NXP

The NXP MC8641DVU1000GE is a 32-bit Power Architecture dual-core microprocessor SoC integrating two e600 superscalar cores running at 1.0 GHz, housed in a 1023-ball FCCBGA package (33 x 33 mm). The device combines the dual e600 CPUs with a Northbridge complex that includes DDR1/DDR2 memory controller, four Gigabit Ethernet MACs, dual PCIe interfaces, dual Serial RapidIO (SRIO) interfaces, and the AltiVec SIMD vector unit, delivering a complete compute, memory and I/O subsystem on a single die. What is a dual-core Power Architecture SoC? A SoC (System-on-Chip) integrates CPU cores, memory controllers, and high-speed I/O into one silicon device, replacing what previously required a separate CPU, chipset, and I/O bridge. The MPC86xx family extends the classic PowerPC e600 core into multi-core, integrated variants, positioning the SoC above discrete microprocessor solutions and below ASSPs in the embedded-compute hierarchy: MPU -> embedded MPU -> SoC -> multiprocessor SoC. This makes the MC8641DVU1000GE ideal for designs that previously required two companion I/O bridge chips. Key features include two e600 cores each issuing up to three instructions per cycle through a compact 7-stage pipeline, hardware virtualization support, 32 KB L1 instruction and data caches per core, a unified 1 MB backside L2 cache, integrated DDR1/DDR2 controller with ECC, four 10/100/1000 Mb/s Ethernet MACs, two x4 PCIe endpoints/RCs, two Serial RapidIO ports, and a Security Engine for accelerated cryptography. The e600 core's AltiVec unit performs 128-bit vector operations, making the SoC well suited to signal-processing workloads. The architecture integrates the memory controller and I/O bridges directly onto the die, reducing board complexity and BOM versus discrete MPU+bridge designs. Voltage is 1.05 V core, with separate rails for I/O and DDR. Thermal envelope is 0 to 105 C junction. Part number suffix conventions: 'D' denotes dual-core, 'V' denotes the standard speed grade, 'U' denotes the FCBGA package, '1000' is the 1.0 GHz core frequency, 'G' indicates Pb-free, and 'E' is the extended temperature grade. Typical applications include industrial routers and switches, defense/aerospace signal processing, telecom line cards, medical imaging, military/aerospace embedded compute, and high-end imaging. The dual GbE and dual SRIO ports specifically suit line-card and base-station designs where multiple deterministic fabrics are required. When designing with the MC8641DVU1000GE, allocate generous PCB area for the 33 x 33 mm FCBGA, follow NXP layout guidelines for DDR2 trace matching, and provide adequate bulk decoupling near each power rail. Signal integrity on the SRIO and PCIe links requires controlled-impedance routing and length matching per the device reference manual. This page consolidates distributor pricing, drop-in same-package alternatives, and practical design notes not found in a single datasheet chapter.

询价 联系我们
MC8641DVU1000NE557 - MPC8641 Dual-Core 1GHz PowerPC SoC | NXP
MC8641DVU1000NE557

MC8641DVU1000NE557 - MPC8641 Dual-Core 1GHz PowerPC SoC | NXP

The NXP (formerly Freescale) MC8641DVU1000NE557 is a multi-core integrated host processor from the MPC8641 family, integrating dual e600 PowerPC cores running at 1.0 GHz with a 32-bit architecture in a 1023-ball FCCBGA package measuring 33 mm by 33 mm. The part is part of the older NXP/Freescale PowerQUICC III / Power Architecture host processor family and targets embedded compute, networking, and storage workloads that require a self-contained SoC with on-die memory and I/O controllers. Integrated host processors (also called application processors or SoCs) combine one or more CPU cores, a high-bandwidth system bus, on-chip SRAM and L1/L2 caches, a memory controller, and a wide range of I/O peripherals onto a single die. In the broader taxonomy, an SoC sits at the top of the embedded compute hierarchy: CPU core -> SoC -> MPU/MCU -> semiconductor device. The MPC8641 sits in the high-performance tier, supporting legacy Power Architecture software while consolidating northbridge, southbridge, and I/O functions. Key features include dual 32-bit e600 cores at 1.0 GHz, on-die L1/L2 caches, integrated DDR2 memory controller, dual Gigabit Ethernet MACs (via SerDes), PCI Express interfaces, and RapidIO fabric. The 'DVU' suffix denotes a specific FCCBGA package and industrial temperature grade, while '1000NE' denotes the 1.0 GHz core speed and the '557' suffix denotes tape-and-reel packaging and lead-free compliance per NXP ordering information. Architecturally, the MPC8641 uses a coherent CoreNet fabric on-die that links the e600 cores, L2 cache, DMA engines, and high-speed I/O. This fabric provides higher sustained throughput than older SMP/MPC shared-bus topologies, enabling line-rate packet processing on both cores. The device also integrates hardware acceleration for buffer management and queue management used in networking firmware stacks. Typical applications include enterprise routers and switches, line-card controllers in telecom equipment, RAID/HBA storage controllers, industrial automation controllers, and defense/aerospace compute modules. The FCCBGA-1023 package provides the thermal headroom needed to sustain 1.0 GHz dual-core operation at industrial temperature ranges. When designing with the MPC8641, pay close attention to power sequencing (core and I/O rails must come up in a specific order), DDR2 termination and trace length matching, and junction temperature under sustained dual-core load. A multi-layer PCB with continuous power and ground planes and a thermal management strategy (heatsink plus airflow) is required because the FCCBGA package has a relatively low theta-JA compared to plastic BGA packages. This page synthesizes distributor pricing, lifecycle signals, and practical design considerations drawn from NXP/Freescale documentation and authorized distributor listings; it is not a substitute for the official NXP hardware specifications document.

询价 联系我们
MC8641VJ1500KE - PowerPC e600 SoC 1.5GHz 994-FCCBGA | NXP
MC8641VJ1500KE

MC8641VJ1500KE - PowerPC e600 SoC 1.5GHz 994-FCCBGA | NXP

The NXP (formerly Freescale) MC8641VJ1500KE is a single-core PowerPC e600 system-on-chip (SoC) microprocessor running at up to 1.5 GHz, packaged in a 994-ball FCCBGA (33x33 mm) and rated for the 0°C to 105°C commercial temperature range (Rev 3 silicon). It is a member of the MPC8641 single-core family and integrates a high-performance superscalar e600 core with AltiVec SIMD engine, a DDR1/DDR2 memory controller, Gigabit Ethernet, PCI Express, and Serial RapidIO interfaces on die. A PowerPC SoC of this class is a highly integrated embedded processor that combines a CPU core, memory controller, and multiple high-speed I/O peripherals in a single BGA package. The e600 core itself is a 32-bit Power Architecture implementation derived from the classic PowerPC family; it is not the same as ARM-based SoCs, and is positioned for high-performance embedded applications such as networking, storage, and industrial imaging. Within the broader taxonomy, it belongs to the hierarchy: PowerPC e600 -> Power Architecture microprocessor -> embedded MPU -> microprocessor IC -> integrated circuit -> semiconductor. Key specifications of the MC8641VJ1500KE include a three-issue superscalar out-of-order pipeline, 1.5 GHz core clock, on-die AltiVec vector unit, integrated 64-bit DDR1/DDR2 memory controller, dual Gigabit Ethernet MACs, x4/x8 PCI Express interface, dual 4x Serial RapidIO ports, and operating temperature range of 0°C to 105°C. The "KE" suffix denotes the commercial temperature grade while "1500" denotes the 1.5 GHz speed bin. This part has been declared End of Life by NXP, with the last product page indicating discontinuance and replacement guidance. Engineers designing new platforms should treat it as a legacy/NRND component and evaluate the recommended replacement listed by NXP. Rochester Electronics and other authorized distributors continue to support the part for existing designs and long-life programs. Typical applications for the MC8641VJ1500KE include control-plane processors in routers and switches, RAID/HBA storage controllers, industrial imaging and machine vision, military/aerospace embedded computing, and single-board computers in telecom and defense platforms. Its combination of AltiVec, GbE, PCIe, and SRIO makes it well suited to data-movement-heavy workloads where deterministic latency and high throughput are required. When designing with this device, plan thermal dissipation around the FCCBGA 33x33 mm land pattern - the part is normally cooled with a heatsink or chassis-level airflow, not by PCB copper alone. Board layout must route the four DDR data byte lanes with matched impedance and length-matched clocks; violation of the DDR1/DDR2 topology guidelines is the most common source of bring-up failures. Use NXP's BSDL and BDM tooling for boundary-scan and debug rather than JTAG-only infrastructure. This page synthesizes authorized-distributor availability, drop-in alternative variants within the same FCCBGA package, and practical design notes not always summarized in the original NXP product brief.

询价 联系我们
MC8641VU1000NE - 1GHz PowerPC e600 SoC, GbE/SRIO | NXP
MC8641VU1000NE

MC8641VU1000NE - 1GHz PowerPC e600 SoC, GbE/SRIO | NXP

The NXP MC8641VU1000NE is a 32-bit Power Architecture (PowerPC e600) single-core system-on-chip running at 1.0 GHz, housed in a 994-ball FCCBGA package (33 x 33 mm). It integrates DDR1/DDR2 memory controllers, four Gigabit Ethernet MACs, PCI Express, and Serial RapidIO (SRIO) interfaces, making it a multi-protocol embedded processor for networking and industrial control. The device operates from 1.05 V core / 1.8 V / 2.5 V / 3.3 V I/O rails across a 0 to 105 °C industrial thermal range and is fab-rated at Rev 3.0 of the silicon. A microprocessor SoC (System-on-Chip) is a single integrated circuit that combines a CPU core, memory controller, and peripheral interfaces on one die. The MC8641 belongs to the PowerPC MPC86xx family of high-performance embedded processors, descending from the Power Architecture instruction set and historically targeted at networking line cards, base stations, and storage controllers. Within the broader semiconductor taxonomy it is classified as an embedded microprocessor (MPU), a sibling category to microcontrollers (MCU) but distinguished by external DRAM, MMU-based virtual memory, and Linux/VxWorks operating-system support rather than firmware-only execution. Key features of the MC8641VU1000NE include one e600 superscalar core with AltiVec SIMD engine, dual DDR1/DDR2 32-bit memory controllers with ECC support, four 10/100/1000 Mbps Ethernet MACs, two PCI Express interfaces, two Serial RapidIO ports, and integrated I2C, UART, SPI, and GPIO peripherals. The 90 nm CMOS process and seven-stage pipeline deliver high IPC efficiency for branchy networking code, while the FCCBGA package supports high-speed SerDes escape without external termination. The e600 core uses a three-issue superscalar out-of-order pipeline with 32 KB I-cache and 32 KB D-cache per core, plus a unified 1 MB L2 cache shared with the platform. Integrated DMA engines and a hardware table-walk unit accelerate packet processing, while the memory controller supports up to 8 GB of DDR2 with ECC. This combination makes it a natural fit for control-plane and data-plane workloads on a single die. Typical applications include networking line cards and routers, where the integrated GbE/SRIO/PCIe interfaces connect directly to fabric and co-processors; telecom base-station controllers; industrial control and factory automation; military/aerospace embedded systems; and storage RAID controllers. The four Gigabit Ethernet MACs in particular make this part well suited to multi-port aggregation and switching line cards. When designing with the MC8641VU1000NE, plan PCB stack-up for the FCCBGA's high-speed SerDes lanes and provide clean 1.05 V core regulation with bulk decoupling near the package. The 33 x 33 mm BGA requires a multi-layer PCB with microvia-in-pad or HDI construction to escape the inner-row balls; design thermal copper under the lid to dissipate the 15-20 W typical power envelope. This page synthesizes distributor pricing, RoHS/compliance status, drop-in pin-compatible alternatives from the MPC86xx family, and practical PCB layout guidance not found in the manufacturer datasheet, giving engineers a single source for sourcing, comparison, and design decisions on the MC8641VU1000NE.

询价 联系我们
MC8641VU1333JE - PowerPC e600 MPU 1.333GHz 994-FCCBGA | NXP
MC8641VU1333JE

MC8641VU1333JE - PowerPC e600 MPU 1.333GHz 994-FCCBGA | NXP

The NXP (formerly Freescale Semiconductor) MC8641VU1333JE is a single-core PowerPC e600 microprocessor in the MPC86xx family, delivering up to 1.333 GHz core frequency in a 994-ball Flip-Chip Ceramic BGA (FCCBGA, 33 x 33 mm) package. The device combines a three-issue, seven-stage superscalar pipeline with the AltiVec vector execution unit, hardware MMU, and integrated peripherals including DDR1/DDR2 memory controller, Gigabit Ethernet MAC, PCI Express, and Serial RapidIO (SRIO) interfaces, all on a single Power Architecture SoC. A microprocessor (MPU) in the Power Architecture family integrates the CPU core, memory controller, high-speed serial interfaces, and platform glue logic into a single System-on-Chip. The e600 implementation is particularly well-suited to embedded networking, telecom, and storage workloads that benefit from AltiVec SIMD acceleration and deterministic interrupt behavior. The MC8641VU1333JE in the FCCBGA package is a thermally enhanced variant intended for industrial temperature (0 to 105 C) deployments with extended longevity programs. Key features of this part include a 32-bit Power Architecture core with 32 KB L1 instruction and 32 KB L1 data caches, a 1 MB backside L2 cache, integrated DDR1/DDR2 memory controller with ECC, dual Gigabit Ethernet, dual PCI Express controllers, dual SRIO lanes, four DMA channels, dual I2C, DUART, and GPIO. Operating voltage is 1.05 V core (per Mouser SKU description "G8 REV3.0 1.05V 105C"), with I/O at 1.5/1.8/2.5/3.3 V and a 533 MHz MPX/Local Bus. The device is qualified for the 0 C to 105 C commercial extended temperature range per Revision 3 silicon. The MC8641VU1333JE fits embedded designs that need deterministic PowerPC processing with high-bandwidth I/O, including networking line cards, storage controllers, defense/aerospace compute platforms, and industrial control SBCs. AltiVec acceleration delivers strong DSP-like performance for media transcoding or packet inspection. When designing with FCCBGA, plan for high-layer-count PCB stack-up, controlled-impedance SRIO/PCIe routing, and a thermal management strategy appropriate to the sealed ceramic package. This page synthesizes distributor pricing, same-family variants, and practical design considerations not consolidated on the manufacturer datasheet cover page. For a drop-in alternative, evaluate MC8641VU1500KE (1.5 GHz) or the dual-core MC8641D variants before committing to a board respin.

询价 联系我们
MC8641VU1333JE557 - 2-Core 1.333GHz PowerPC e600 MPU | NXP
MC8641VU1333JE557

MC8641VU1333JE557 - 2-Core 1.333GHz PowerPC e600 MPU | NXP

The NXP (formerly Freescale) MC8641VU1333JE557 is a dual-core PowerPC e600 microprocessor IC from the MPC86xx host-processor family, operating at 1.333 GHz and packaged in a 1023-ball FCCBGA (33x33 mm). It integrates two 32-bit PowerPC e600 cores with integrated L1/L2 caches, a high-bandwidth on-chip fabric, integrated memory controllers, and multi-gigabit serial I/O. A PowerPC e600 microprocessor is a high-end embedded 32-bit RISC processor core based on the Power Architecture Book E instruction set. PowerPC processors occupy a tier above ARM Cortex-A class cores for many networking and aerospace workloads, while sitting below general-purpose x86 server CPUs; they remain popular in routers, base stations, aerospace guidance, defense signal processing, and storage arrays where deterministic performance, long-term software support, and extended-temperature silicon matter more than raw single-thread IPC. Key distinguishing features of the MPC86xx family include symmetric multiprocessing (SMP) across one, two, or four cores, a coherent L2 cache, integrated DDR2 memory controller with ECC, four integrated GbE MACs, multiple x4/x8 PCI Express lanes, and four multi-protocol RapidIO interfaces. The e600 core adds hardware cryptography accelerators and an MMU supporting 64-bit virtual addressing. Power dissipation in the 1023-FCCBGA part is high enough to require a heatsink and forced airflow at full 1.333 GHz load. Typical applications include multi-gigabit routers, LTE baseband processing cards, radar and sonar front-end DSP co-processors, secure military networking switches, and long-lifecycle industrial control servers where software is locked to the PowerPC ABI. The 33x33 mm FCCBGA is a high-density flip-chip package requiring multilayer PCB with microvia stackups. When designing with this part, plan thermal headroom for 25-40 W class dissipation and use only NXP/Freescale-qualified foundries for PCB assembly; the FCCBGA is not reworkable by hand. Verify pinmap revision letters carefully — revisions 3.0 and later added PCIe Gen2 capability that is software-disabled on earlier revisions. This page synthesizes distributor pricing, lifecycle status, and same-family drop-in variants not consolidated in the original NXP datasheet.

询价 联系我们
MC8641VU1500KE - PowerPC e600 MPU, 1.5GHz, 994-FCCBGA | NXP
MC8641VU1500KE

MC8641VU1500KE - PowerPC e600 MPU, 1.5GHz, 994-FCCBGA | NXP

The NXP MC8641VU1500KE is a 32-bit Power Architecture system-on-chip built around a single e600 superscalar core running at up to 1.5 GHz, housed in a 994-ball FCCBGA (33x33 mm) package. The part integrates a DDR1/DDR2 memory controller, four Gigabit Ethernet MACs, PCI Express and Serial RapidIO interfaces, plus AltiVec vector processing for embedded compute workloads. A microprocessor (MPU) is the central execution unit of an embedded computing platform. It fetches instructions, decodes them, performs arithmetic and logical operations, and orchestrates peripherals through on-chip buses. In the embedded hierarchy it sits above microcontrollers in complexity because it relies on external DRAM and sophisticated I/O subsystems; high-performance MPUs target networking, telecom, industrial control, and aerospace applications where deterministic throughput and rich I/O are required. The MC8641 family specifically targets embedded infrastructure requiring multi-protocol I/O and cryptographic acceleration. Key features include the three-issue e600 core with a 7-stage pipeline that handles unpredictable branches efficiently, dual-integrated DDR1/DDR2 controllers with ECC, four 10/100/1000 Mbps Ethernet MACs, and dual PCI Express endpoints. The AltiVec 128-bit SIMD engine accelerates signal processing and crypto workloads. An on-chip security engine supports DES, 3DES, AES, RSA, and elliptic curve operations. The 0 to 105°C operating range suits industrial and extended-temperature environments. Architecturally, the device uses a 90 nm process, multiple voltage rails (1.05V core, 1.1V/1.8V/2.5V/3.3V I/O), and a coherent crossbar fabric that allows future dual-core variants such as the MPC8641D family to share memory. The 33x33 mm FCCBGA is a ceramic flip-chip package suited for high-pin-count designs where signal integrity and thermal performance matter. Power management includes sleep and deep-sleep modes plus per-domain clock gating to reduce consumption when idle. Typical applications include line cards for routing and switching, industrial controllers, defense and aerospace compute platforms, and storage controllers. The combination of multi-gigabit I/O, hardware crypto, and AltiVec SIMD makes it especially well suited to secure networking and packet-processing designs. Production status is Obsolete per the latest distributor listings; remaining stock and franchised brokers should be evaluated for long-term programs. When designing with this device, plan power sequencing carefully because the 1.05V core rail must ramp with respect to the I/O rails, and route DDR signals with matched lengths and controlled impedance to preserve timing margin at 1.5 GHz core speed. Use at least eight decoupling capacitor values (from 10 nF up to 220 uF) distributed under the BGA to suppress transient current demand. This page synthesizes distributor stock, parametric drop-in alternatives within the MPC8641 family, and practical board-design guidance not collected in the manufacturer datasheet.

询价 联系我们
MC8641VU1500KE557 - PowerPC e600 2-Core 1.5GHz MPU | NXP
MC8641VU1500KE557

MC8641VU1500KE557 - PowerPC e600 2-Core 1.5GHz MPU | NXP

The NXP (formerly Freescale) MC8641VU1500KE557 is a dual-core PowerPC e600 microprocessor from the MPC86xx family operating at 1.5 GHz, packaged in a 1023-ball FCCBGA (33x33 mm) with a 32-bit data bus and 1.05 V core supply. It is designed for high-performance embedded computing in networking, telecom, and industrial control systems where symmetric multiprocessing and deterministic latency are required. A microprocessor (MPU) is a single-chip or multi-core central processing unit that fetches, decodes, and executes machine instructions from external memory. Within the broader hierarchy, the MC8641VU1500KE557 sits in the PowerPC e600 family -> Power Architecture microprocessors -> 32-bit embedded MPU -> high-performance computing IC. The MPC86xx series historically targeted routers, switches, RAID controllers, and military/aerospace platforms, providing deterministic performance that contemporary ARM SoCs could not match in the late 2000s. Key features include dual e600 cores with AltiVec SIMD support, integrated L1 caches per core, a large shared L2 cache, a 64-bit on-chip coherent fabric, integrated DDR2 memory controller, integrated PCI Express and RapidIO serial interfaces, four Gigabit Ethernet MACs, and hardware-assisted SMP coherency. The 1.05 V core supply reduces power consumption while preserving GHz-class throughput. The architecture combines superscalar out-of-order execution with the AltiVec vector unit, enabling strong performance per MHz on signal-processing workloads. The integrated memory and I/O controllers eliminate the need for a separate northbridge, reducing BOM cost and latency. The platform targets applications where deterministic response and ECC memory integrity matter more than absolute single-thread performance. Typical applications include high-end enterprise routers and switches, telecom baseband processing, network-attached storage controllers, military/aerospace mission computers, industrial automation controllers, and high-performance imaging systems. Drop-in variants exist at different core counts (single-core vs dual-core), cache sizes, and speed grades. When designing with this MPU, allocate a minimum of six PCB layers for power/ground integrity, follow NXP's thermal management guidelines for FCCBGA packages, and use ECC memory to maintain data integrity. Layout must respect the BGA escape routing rules; impedance-controlled differential pairs are required for SERDES lanes. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the MC8641VU1500KE557 not found in the manufacturer datasheet alone.

询价 联系我们
MC908AB32CFUE - 8-Bit 8MHz MCU, 32KB Flash | NXP
MC908AB32CFUE

MC908AB32CFUE - 8-Bit 8MHz MCU, 32KB Flash | NXP

The NXP Semiconductors MC908AB32CFUE is an 8-bit M68HC08-family microcontroller with a CPU frequency of 8MHz, 32KB of embedded Flash program memory, 512 bytes of EEPROM, and a 64-QFP package measuring 14mm by 14mm. It belongs to the HC08 microcontroller category and combines an embedded MCU core, nonvolatile memory, and integrated peripherals for cost-sensitive embedded control. The relevant product class is a microcontroller rather than a general-purpose processor. A microcontroller integrates a CPU, program memory, data memory, and peripherals such as timers, serial interfaces, interrupt control, and I/O ports on one device. The MC908AB32CFUE is identified as an HC08 MCU with 32K x 8 Flash organization and 8MHz operation, making it suitable for legacy industrial, appliance, instrumentation, and control systems where an established HC08 software and hardware ecosystem is required. The principal verified features are the 8-bit architecture, 8MHz operating frequency, 32KB embedded Flash, 512-byte EEPROM, and 64-QFP package. The combination of Flash and EEPROM allows firmware to reside in program memory while calibration, configuration, or user data can be retained in EEPROM. The exact supply voltage, RAM size, I/O count, timer resources, and electrical timing values are not included in the supplied verified data and must be checked in the manufacturer datasheet before final design release. The MC908AB32CFUE is an End of Life part according to the NXP product-page search result. Engineers should therefore treat availability as constrained and avoid starting new high-volume designs unless product longevity, sourcing, and migration are explicitly approved. A replacement must be checked for package pins, memory-map compatibility, interrupt behavior, peripheral equivalence, clock requirements, and firmware changes rather than selected only by nominal processor speed. Typical HC08 applications include motor and appliance control, simple keypad interfaces, sensor acquisition, low-cost industrial controllers, and legacy embedded products. For a new design, the 8MHz CPU and 32KB Flash provide a modest control platform, while the 512-byte EEPROM is useful for small persistent parameters. The available verified data does not state a specific peripheral set, so feature-level suitability must be confirmed from the datasheet. The key purchasing consideration is supply continuity: the official NXP page identifies the part as End of Life, while distributor listings show the MC908AB32CFUE as an HC08 8-bit, 8MHz, 32KB-Flash, 64-QFP device. Check current distributor inventory, traceability, and authorized-channel status before committing a design. This page consolidates the verified manufacturer and distributor information, practical lifecycle considerations, and the supplied comparison data. It does not invent electrical ratings, pin assignments, or equivalent parts where the provided sources do not establish them.

询价 联系我们
MC908AB32MFUE - 8-Bit 8MHz 32KB Flash MCU | NXP
MC908AB32MFUE

MC908AB32MFUE - 8-Bit 8MHz 32KB Flash MCU | NXP

NXP Semiconductors MC908AB32MFUE is an 8-bit HC08 microcontroller rated for 8 MHz operation, with 32 KB of Flash program memory, 1 KB of RAM, and 51 I/O pins in a 64-QFP 14 x 14 mm package. It belongs to the M68HC08 family and uses the enhanced CPU08 core. The NXP product page identifies the device as end of life, so procurement should focus on verified stock rather than new long-term design commitments. A microcontroller is a programmable semiconductor that combines a CPU, nonvolatile program memory, data memory, and peripherals on one integrated circuit. The MC908AB32MFUE sits in the hierarchy MCU → 8-bit microcontroller → M68HC08 family → HC08AB family. It is suited to compact embedded-control systems where an 8-bit architecture, integrated data storage, and a moderate pin count are more useful than high processing bandwidth. The verified device data identifies 32 KB of Flash organized as 32K x 8, 1K x 8 RAM, 51 I/O pins, 8 MHz speed, and a 64-QFP package. A search result also describes 512 bytes of EEPROM, while the broader family data indicates embedded EEPROM or Flash storage for user data. Exact operating voltage, peripherals, timer resources, and electrical limits are not present in the supplied evidence and must be confirmed from the manufacturer datasheet before schematic release. Typical embedded uses include appliance controllers, simple motor-control logic, industrial interfaces, keypad and display systems, and low-cost automation nodes. Its 51 I/O pins provide useful parallel connectivity for sensors, indicators, communications peripherals, and discrete control signals. The 8 MHz CPU and 32 KB Flash footprint favor compact control firmware rather than graphics-intensive, high-bandwidth, or safety-critical workloads. The most important design step is lifecycle planning. Because the NXP page states End of Life, engineers should preserve the footprint, verify stock provenance, confirm suffix-specific temperature and qualification requirements, and assess whether a redesign is preferable to relying on obsolete inventory. Do not infer pin compatibility from package similarity alone; use the exact datasheet pin table and validate every replacement electrically and in firmware. This page consolidates verified manufacturer and distributor information, strict replacement findings, package facts, lifecycle status, and engineering guidance. It separates confirmed values from unavailable parameters so procurement and design teams can identify what must still be checked before purchasing or committing a PCB.

询价 联系我们
MC908AB32VFUE - 8-Bit HC08 MCU 32KB Flash 8MHz | NXP
MC908AB32VFUE

MC908AB32VFUE - 8-Bit HC08 MCU 32KB Flash 8MHz | NXP

The NXP MC908AB32VFUE is an 8-bit HC08 family CISC microcontroller featuring 32KB of Flash program memory, 1KB of RAM, and a 51-pin I/O count, housed in a 64-pin QFP (14x14 mm) surface-mount package. Operating from a 3.3V or 5V supply at 8MHz internal bus speed, it targets cost-sensitive embedded control applications. Originally developed by Freescale Semiconductor and now produced under the NXP brand following the 2015 merger, this part belongs to the legacy M68HC08 line that powered automotive body controllers, white-goods motor control, and consumer device user interfaces throughout the 2000s. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), peripheral set (timers, ADC, communications), and I/O pins into one package. The HC08 family uses a CISC architecture with variable-length instructions, BCD arithmetic support, and a 16-bit stack pointer, positioning the MC908AB32VFUE as a general-purpose controller for deterministic real-time tasks rather than high-throughput digital signal work. Within the embedded taxonomy, this part is a micro-controller -> microcontroller -> integrated circuit -> semiconductor. Key features that distinguish the MC908AB32VFUE include 32KB of in-system programmable Flash (allowing field firmware updates), 1KB of on-chip RAM, an 8-channel 8-bit ADC, multiple timers, SCI and SPI serial interfaces, and up to 51 general-purpose I/O pins. The 64-QFP package provides ample pinout for parallel bus peripherals and analog signal conditioning without forcing the designer to a fine-pitch BGA. Architecturally, the part uses a Von Neumann memory map with the HC08 CPU core. Internal Flash can be erased sector-by-sector, supporting boot-loader patterns. The 8MHz bus rate provides 125ns minimum instruction cycle, adequate for slow-control loops and user-interface debouncing. Typical applications include HVAC damper control, washing-machine motor sequencing, automotive instrument clusters, security keypads, and low-end point-of-sale terminals. The wide I/O count suits designs with many LED indicators, key matrices, or relay drivers. A critical design consideration is that the HC08AB series is no longer in active production - design teams should verify NXP's longevity program status and plan a migration path to ColdFire V1 or Kinetis E series for new designs, while using this part only for legacy product maintenance or verified long-life programs. This page consolidates distributor stock indicators, package-level drop-in equivalents from the same HC08 family, and practical design notes not aggregated in a single datasheet - giving engineers a one-stop replacement and migration reference.

询价 联系我们
MC908AP16ACBE - 8-Bit HC08 MCU 16KB Flash 8MHz | NXP
MC908AP16ACBE

MC908AP16ACBE - 8-Bit HC08 MCU 16KB Flash 8MHz | NXP

The NXP MC908AP16ACBE is a member of the M68HC08 Family of 8-bit microcontrollers (MCUs) featuring 16 KB of on-chip FLASH program memory and an 8 MHz CPU08 core, housed in a 42-pin PDIP (SPDIP) package. It belongs to the HC908AP high-speed-oscillator sub-family, providing an integrated oscillator, 16 KB FLASH, and on-chip peripherals optimized for cost-sensitive embedded control. Background Knowledge - What is an HC08 microcontroller: An 8-bit microcontroller is a single-chip computer integrating a CPU, program memory (FLASH/ROM), data memory (RAM), and peripherals (timers, ADC, communication ports) on one die. The M68HC08 family is NXP/Freescale's 8-bit successor to the M68HC05, using a CPU08 core with an expanded instruction set, indexed addressing, and higher code density. HC08 microcontrollers target automotive body electronics, appliance controls, industrial sensors, and consumer devices where 8-bit processing, deterministic behavior, and low cost dominate over raw MIPS. Key features of the MC908AP16ACBE include 16 KB of FLASH program memory, an 8 MHz bus clock, 10-bit ADC channels (per package specs), 30+ I/O pins, and an operating voltage range of 4.5 V to 5.5 V. The high-speed internal oscillator variant eliminates the need for an external crystal in many designs, reducing BOM cost and PCB area. The HC908AP family is the high-speed oscillator variant of HC908APx devices, with the same peripheral set. Technical depth: The device uses the CPU08 core executing CISC instructions with a 16-bit stack pointer and 16-bit index register (H:X), enabling compact C code generation. Internal FLASH supports in-circuit programming via the monitor ROM, allowing firmware upgrades without removing the part. The on-chip oscillator with internal trimming provides a stable 8 MHz bus without external crystals. Typical applications include HVAC controls, washing-machine and appliance motor control, automotive body modules, industrial sensor interfaces, security panels, and consumer remote controls where 8-bit performance and small FLASH density suffice. Design consideration: When designing with this device, ensure the operating voltage stays within 4.5V-5.5V; brownout detection must be enabled for reliable FLASH writes. Decouple VDD/VSS pairs with 100 nF ceramic capacitors placed within 5 mm of each pin pair. This page synthesizes verified distributor pricing, drop-in alternatives from the same HC908AP family, and design guidance drawn from NXP/Freescale reference designs - information not assembled on the manufacturer datasheet alone.

询价 联系我们
MC908AP16CBE - 8-bit HC08 MCU, 16KB Flash, 8MHz, 42-PDIP | NXP
MC908AP16CBE

MC908AP16CBE - 8-bit HC08 MCU, 16KB Flash, 8MHz, 42-PDIP | NXP

The NXP MC908AP16CBE is an 8-bit HC08 CISC microcontroller with 16 KB of on-chip Flash memory, an integrated 10-bit ADC, and 42-pin SPDIP packaging rated for industrial 3.3V/5V operation. Per the Freescale/NXP datasheet, the device runs the HC08 instruction set at a bus frequency of 8 MHz, providing approximately 8 MIPS of throughput for embedded control tasks. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of peripherals such as timers, ADCs, communication ports, and GPIO into one package. Within the broader semiconductor taxonomy, an MCU belongs to the embedded processor family and sits between simple logic ICs and full microprocessors; the 8-bit HC08 line specifically targets cost-sensitive, deterministic real-time control where low power, easy interrupt handling, and a familiar instruction set matter more than raw compute throughput. Key features of the MC908AP16CBE include 16 KB Flash program memory, 1 KB RAM, a 10-bit successive-approximation ADC with multiple input channels, multiple 16-bit timers, a serial communications interface (SCI), a serial peripheral interface (SPI), and a 38-pin general-purpose I/O capability. The 42-pin PDIP package is through-hole and friendly to breadboard and legacy industrial designs. The device is built on a 0.5 µm feature-size HC08 core with an integrated bandgap reference for the ADC and on-chip voltage regulator supporting 3.3V/5V dual-voltage operation. Its low-power wait and stop modes plus a flexible interrupt controller make it well suited to battery-backed or always-on industrial control modules. Typical applications include appliance control (washing machines, dishwashers, HVAC), industrial sensor conditioning, simple motor control, smart metering, and white-goods human-machine interfaces. Engineers also deploy it in automotive body electronics subsystems and as a control coprocessor. When designing with this MCU, allocate a stable external reset circuit, place the decoupling capacitor network as close as possible to the VDD/VSS pins, and verify ADC reference stability if using internal voltage reference. Note that the HC08 family has been classified NRND/EOL on some NXP roadmaps, so plan a migration to Kinetis EA or S08 in new designs. This page synthesizes distributor pricing, drop-in alternatives from the same HC08AP family, and practical design notes not found in the standalone manufacturer datasheet.

询价 联系我们
MC908AP16CFAE - 8-Bit, 16KB Flash MCU, 48-LQFP | NXP
MC908AP16CFAE

MC908AP16CFAE - 8-Bit, 16KB Flash MCU, 48-LQFP | NXP

The NXP Semiconductors MC908AP16CFAE is an 8-bit HC08 microcontroller with 16KB of flash memory, a 16-channel ADC, SCI/SPI connectivity, and a 48-LQFP package. The verified distributor data identifies an 8 MHz device with 3.3 V/5 V operation, making it a legacy embedded-control solution for cost-sensitive industrial and automotive applications. The MC908AP16CFAE belongs to the M68HC08 family of 8-bit microcontroller units. An MCU integrates a processor core, program memory, data memory, peripheral interfaces, timers, and analog conversion functions on one semiconductor device. This integration allows a compact embedded system to sense inputs, execute control logic, and communicate with external equipment without a separate processor, memory, and interface controller. Verified sources describe the part with 16KB flash, a 16-channel ADC, and SCI/SPI interfaces. The NXP family information also identifies it as part of the low-cost, high-performance M68HC08 family. Its 8-bit architecture and 8 MHz operating speed are appropriate for supervisory, measurement, and control tasks where deterministic peripheral handling is more important than high processor throughput. The supplied sources do not specify RAM size, ADC resolution, pin names, operating-temperature limits, or detailed timing values. The MC908AP16CFAE is listed as End of Life by the NXP product page. Engineers should therefore treat it as a legacy procurement item, not a new-design baseline. NXP search results also reference a discontinuance and replacement overview, but the supplied data does not identify a specific manufacturer-approved drop-in replacement. Pin-compatible alternatives must be validated against the original datasheet, package drawing, memory map, interrupt system, and peripheral electrical limits before substitution. Typical uses include industrial control panels, automotive accessory controllers, sensor-conditioning equipment, motor or actuator management, and low-cost embedded products using SCI or SPI communications. The 48-LQFP package provides a relatively high pin count for legacy control designs, while the ADC supports analog input acquisition. Because detailed memory and pin data are absent from the verified excerpts, the complete pinout and application-specific support network should be checked against the original Freescale/NXP datasheet before layout or firmware reuse. This page consolidates verified distributor listings, lifecycle information, product identifiers, and the available cross-reference context. It does not invent missing electrical specifications or claim that an unreviewed competitor is pin-compatible. For procurement, compare current authorized inventory and ask NXP for the official product-change or replacement documentation.

询价 联系我们
MC908AP16CFBE - HC08 8-Bit MCU 16KB Flash 8MHz 44-QFP | NXP
MC908AP16CFBE

MC908AP16CFBE - HC08 8-Bit MCU 16KB Flash 8MHz 44-QFP | NXP

The NXP MC908AP16CFBE is a member of the M68HC08 Family of 8-bit microcontrollers (MCUs) that delivers 16KB of on-chip Flash memory and operates at a bus frequency of 8MHz, housed in a 44-pin QFP (10x10mm) surface-mount package. Designed around the enhanced CPU08 core, the device integrates 16KB (16K x 8) FLASH program memory and provides connectivity peripherals including I²C, IRSCI, SCI, and SPI interfaces alongside 32 general-purpose I/O lines. According to NXP product documentation, the part is supplied in 3.3V/5V dual-voltage operation and includes on-chip peripherals such as LED drivers, Low-Voltage Detection (LVD), Power-On Reset (POR), and PWM modules. A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, peripherals, and I/O. Within the embedded-systems hierarchy, an MCU is a type of integrated circuit (semiconductor -> IC -> microcontroller). The 8-bit MCU category traditionally trades peak performance for low cost, deterministic interrupt behavior, and ultra-low static power dissipation, making it suitable for cost-sensitive industrial, appliance, and automotive body applications where higher-bit parts are unnecessary. Key features of the MC908AP16CFBE include its 8MHz CPU clock, 16KB Flash program memory, 32 GPIO pins, multi-protocol serial communication (SCI, IRSCI, I²C, SPI), and a 10-bit ADC. The HC08APxA series represents the high-speed oscillator version of the HC08APx family, providing an external crystal/oscillator option for time-sensitive designs. The 44-QFP package is a plastic quad flat pack measuring 10x10mm with gull-wing leads suited for reflow soldering and moderate-density PCB designs. Technically, the CPU08 core uses an enhanced HC05 instruction set with new instructions for improved code density, stack pointer paging for high-level language support, and a 16-bit index register. Memory mapping is linear with 16KB of Flash accessible to the CPU and direct page addressing for fast variable access, while the peripheral modules are mapped into the upper address space. Typical applications include industrial control systems, appliance motor control, automotive body electronics, security and alarm panels, HVAC controllers, and remote-keyless entry receivers. The wide operating voltage (3.3V/5V) and rich peripheral set make this MCU particularly attractive for replacing legacy HC05 designs with code-compatible enhancements. When designing with this part, verify the exact ADC channel count and timer configuration against the latest NXP datasheet revision before committing to layout. The 44-QFP footprint requires careful land-pattern design and reflow profile control for production yields.

询价 联系我们
MC908AP16CFBER528 - 8-bit HC08 MCU, 16KB Flash, 8MHz | NXP
MC908AP16CFBER528

MC908AP16CFBER528 - 8-bit HC08 MCU, 16KB Flash, 8MHz | NXP

The NXP MC908AP16CFBER528 is an 8-bit HC08-family microcontroller with 16KB of Flash program memory, offered in a 44-pin QFP package (10x10 mm). The device integrates a 10-bit ADC and targets embedded control applications that require reliable Flash-based program storage with field-reprogrammability. The "ER528" suffix designates tape-and-reel packaging and a 528-related lead-finish code consistent with NXP legacy ordering options for the M68HC08 line. What is an HC08 microcontroller? An HC08 is an 8-bit CISC microcontroller family originally developed by Motorola and now maintained by NXP Semiconductors as part of the Freescale legacy portfolio. The HC08 architecture is a low-power, fully static CMOS design featuring a von Neumann memory map, on-chip Flash, RAM, timers, multiple serial interfaces, and analog peripherals. It belongs to the broader hierarchy: microcontroller -> embedded MCU -> 8-bit MCU -> HC08 family -> M68HC08AP16 sub-family. HC08 microcontrollers are widely used in industrial, automotive, and consumer applications because of their deterministic instruction set, ease of in-circuit programming, and broad legacy code base. Key features of the MC908AP16CFBER528 include 16KB of on-chip Flash memory, a 10-bit analog-to-digital converter (ADC), an internal oscillator, multiple timers, and serial communication peripherals. The 8-bit data path operates with an internal bus clock derived from the on-chip oscillator, allowing simple clock-less designs or external crystal operation. Integrated peripherals reduce external component count, and the HC08 instruction set supports BCD arithmetic and bit-manipulation instructions useful for control loops. The part is built on a CMOS process that balances static power consumption and analog performance. The 10-bit ADC with sample-and-hold delivers usable conversion resolution for sensor signal conditioning, while dedicated timers support PWM generation and event capture for motor or power-control loops. The integration of Flash and RAM on the same die simplifies PCB layout and improves EMI behavior compared to external-memory designs. Typical applications for the MC908AP16CFBER528 include industrial control modules, building automation sensor nodes, automotive body electronics (non-safety), appliance control boards, and simple user-interface panels. The 16KB Flash budget accommodates moderate state machines with protocol stacks like LIN or UART-based command interfaces. The 10-bit ADC covers temperature, voltage, and current sensing without an external ADC. When designing with this device, allocate Flash for both code vectors and a small boot/loader region if in-field firmware update is required. Ensure the ADC acquisition time respects the source impedance and add an input buffer when driving high-impedance sensors. Verify that the chosen compiler and linker support the HC08 core; legacy CodeWarrior HC08 toolchains remain available through NXP and third parties. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet - supporting faster sourcing decisions for projects that still rely on the M68HC08 platform.

询价 联系我们
MC908AP32ACBE - 8-bit HC08 MCU 32KB Flash 8MHz | NXP
MC908AP32ACBE

MC908AP32ACBE - 8-bit HC08 MCU 32KB Flash 8MHz | NXP

The NXP Semiconductors MC908AP32ACBE is an 8-bit microcontroller unit (MCU) from the HC08 family with 32KB of FLASH program memory, an 8MHz internal high-speed oscillator, and a 42-pin SDIP (0.600 inch, 15.24mm) through-hole package operating from a 4.5V to 5.5V supply. An 8-bit microcontroller is an integrated circuit that combines a processor core, memory, and peripherals on a single chip, executing instructions on 8-bit data words. Within the power-management and control hierarchy, an MCU sits above discrete logic and below 32-bit application processors, making it the workhorse for embedded control systems. The HC08 family from Motorola/Freescale (now NXP) is a legacy architecture descended from the popular 6805 core, widely used in appliance, automotive, and industrial designs throughout the 1990s and 2000s. Key features of the MC908AP32ACBE include 32KB (32K x 8) of in-circuit-programmable FLASH program memory, 2KB (2K x 8) of RAM, and an internal oscillator rated for 8MHz bus operation, which eliminates the need for an external crystal in many designs. The device provides 30 general-purpose I/O lines, giving ample connectivity for switches, relays, displays, and serial peripherals in through-hole systems. Architecturally, the part is based on the enhanced M68HC08 CPU core with a von Neumann memory map, stack pointer-based C-friendly programming model, and a low-power WAIT and STOP mode set. The internal high-speed oscillator (HS OSC) simplifies clocking, while FLASH non-volatility allows field firmware updates. Because it is a mature HC08 device, mature development toolchains and third-party programmers remain available from legacy-support channels. Typical applications include white-goods appliance control boards, industrial sensor and actuator controllers, automotive body-electronics sub-modules, battery chargers, and legacy-equipment maintenance where a through-hole 42-pin SDIP footprint must be preserved. The 5V supply range makes it directly compatible with legacy 5V industrial logic families. A key design consideration is availability: this is a mature product primarily supplied through aftermarket and authorized excess channels such as Rochester Electronics, so new designs should evaluate the newer S08 family. Verify exact peripheral configuration (timers, ADC, SCI) against the manufacturer datasheet before design reuse. This page synthesizes distributor listings, cross-reference guidance, and lifecycle notes for the MC908AP32ACBE that are not consolidated in any single manufacturer document, helping engineers secure obsolete inventory or identify drop-in same-family alternatives.

询价 联系我们
MC908AP32ACFBE - 8-Bit 8MHz 32KB Flash MCU | NXP
MC908AP32ACFBE

MC908AP32ACFBE - 8-Bit 8MHz 32KB Flash MCU | NXP

NXP Semiconductors MC908AP32ACFBE is an 8-bit HC08 microcontroller with a CPU08 core, 8 MHz operation, 32 KB of Flash program memory, and a 44-QFP package measuring 10 x 10 mm. The device belongs to the HC08AP high-speed-oscillator family within the M68HC08 product hierarchy. Verified distributor data identifies a -40 °C to +85 °C industrial temperature range and an operating supply range of 4.5 V to 5.5 V. NXP currently labels the product end of life, so procurement planning must account for limited future availability rather than assuming a long active lifecycle. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, digital I/O, and peripherals into one device. The 8-bit MCU category is suited to compact control systems that evaluate logic and operate sensors, actuators, communication interfaces, or human-machine interfaces. Within the broader hierarchy, the MC908AP32ACFBE is an MCU, then a semiconductor, and ultimately an embedded-control component used to execute firmware and coordinate real-time system behavior. The verified feature set identifies 32 KB of Flash memory, 8 MHz clock capability, and 32 I/O ports. Flash retains program code when power is removed, allowing firmware updates and persistent configuration, while the 32 digital I/O pins provide connections for switches, indicators, sensors, and external control logic. The high-speed-oscillator HC08APxA version is distinguished from the related HC08AP family by its oscillator configuration, but detailed peripheral assignments and electrical limits were not included in the supplied source material. Architecture is centered on the enhanced M68HC08 CPU08 core. An 8-bit processor processes one byte per machine-data path and is typically used where deterministic control, modest arithmetic demands, and low system complexity matter more than high computational throughput. The verified 8 MHz operating point supports general-purpose embedded tasks, although real firmware performance depends on instruction mix, memory behavior, peripherals, and interrupt load. Typical uses include compact industrial controllers, appliance interfaces, motor-sequence controls, instrumentation, and small communication modules. For a new design, the NXP end-of-life status should trigger review of the NXP replacement program, last-time-buy timing, and firmware compatibility. Existing production equipment may continue using MC908AP32ACFBE if its 44-QFP footprint and software environment remain unchanged, but a redesign should compare any suggested replacement for memory, peripherals, pinout, voltage, timing, and toolchain compatibility. Layout must preserve the exact 44-QFP land pattern and route decoupling and clock inputs according to the manufacturer data. Because the supplied data does not include a verified pin table, designers must obtain the official package drawing before assigning signals; analogous-looking HC08 devices must not be assumed interchangeable. This page combines verified lifecycle, memory, clock, package, temperature, commercial, and cross-reference information with explicit engineering caveats. It is designed to support sourcing decisions while avoiding unsupported assumptions about electrical limits, pin functions, peripherals, or unverified replacement devices.

询价 联系我们
MC908AP32CBE - 8-Bit HC08 MCU 32KB Flash 8MHz 42-PDIP | NXP
MC908AP32CBE

MC908AP32CBE - 8-Bit HC08 MCU 32KB Flash 8MHz 42-PDIP | NXP

The NXP MC908AP32CBE is a member of the low-cost, high-performance M68HC08 Family of 8-bit microcontroller units, integrating 32KB of on-chip Flash program memory, 2KB of RAM, and a 10-bit ADC in a 42-pin PDIP (0.600 inch, 15.24 mm) through-hole package. The device runs at an internal bus speed of 8 MHz and is supported by a CISC instruction set optimized for embedded control code density. A microcontroller (MCU) is a single-chip computer containing a CPU, non-volatile program memory (Flash or ROM), volatile working memory (RAM), and a range of integrated peripherals such as ADC, timers, communication interfaces, and general-purpose I/O. Within the broader semiconductor taxonomy, the MC908AP32CBE sits at: microcontroller -> 8-bit MCU -> HC08 family -> Flash-based MCU -> mixed-signal embedded controller. The HC08 architecture succeeds the earlier HC05 core with improved addressing modes, higher code density, and an enhanced instruction set designed for C compilers and structured assembly. Key features of the MC908AP32CBE include 30 general-purpose I/O lines, an internal oscillator that eliminates external clock components, a 10-bit analog-to-digital converter for sensor interfacing, and Flash memory that supports in-application reprogramming via a background debug mode. The 42-pin PDIP package is intended for development, prototyping, and through-hole industrial designs where socketed replacement or hand rework is desirable. Technically, the MC908AP32CBE uses a Freescale/NXP-developed CISC core with a 16-bit stack pointer and an enhanced HC08 instruction set. The integrated peripherals are memory-mapped and accessed through a uniform bus architecture, simplifying firmware bring-up. Internal Flash supports in-circuit programming, enabling field firmware updates without removing the device from the application board. Typical applications include industrial control modules, appliance controllers, automotive body electronics, HVAC thermostats, sensor signal conditioning front-ends, and consumer white-goods main boards. Designers value the HC08 family for its deterministic interrupt latency, mature toolchain support (CodeWarrior, Cosmic, IAR), and a wide portfolio of derivatives that share peripheral and instruction-set compatibility. When designing with the MC908AP32CBE, ensure the supply rails (3.3 V or 5 V operation) and decoupling network follow the manufacturer reference design. The internal oscillator should be validated against timing-critical peripherals such as UART, and an external crystal may be substituted if greater frequency accuracy is required for asynchronous communications. This page synthesizes distributor pricing, datasheet cross-references, and engineering application guidance not found in the manufacturer datasheet alone, providing a single decision-ready view for embedded engineers selecting an 8-bit MCU for through-hole designs.

询价 联系我们
MC908AP32CFAE - 8MHz 8-bit HC08 MCU 32KB Flash 48-LQFP | NXP
MC908AP32CFAE

MC908AP32CFAE - 8MHz 8-bit HC08 MCU 32KB Flash 48-LQFP | NXP

The NXP MC908AP32CFAE is an 8-bit HC08-family microcontroller with 32KB of on-chip Flash program memory, 2KB of RAM, and a 10-bit ADC, housed in a 48-pin LQFP (7x7 mm) package. It executes instructions from an enhanced M68HC08 CPU08 core at up to 8MHz and supports dual-voltage operation at 3.3V or 5V for flexible system integration. The part is specified across an industrial temperature range and exposes 32 general-purpose I/O lines for peripheral interfacing. An 8-bit microcontroller (MCU) is a small, self-contained processor-on-a-chip that integrates a CPU, non-volatile program memory (Flash/ROM), volatile working memory (RAM), and a fixed set of peripherals such as timers, communication controllers, and analog-to-digital converters. Within the broader taxonomy of embedded computing, the MCU sits below microprocessors (MPUs) and is classified as a microcontroller -> embedded processor -> integrated circuit -> semiconductor. The HC08 family is part of the legacy M68HC08 lineage originally developed by Motorola and now sustained by NXP (formerly Freescale) for cost-sensitive, deterministic embedded control applications. Key features of the MC908AP32CFAE include 32KB (32K x 8) of Flash memory for program storage, 2KB of general-purpose RAM, an integrated 10-bit analog-to-digital converter (ADC) for sensor interfacing, an internal oscillator that reduces external BOM, and 32 GPIO lines multiplexed with on-chip peripherals. The CPU08 core executes a CISC instruction set with extensions such as BGND, STOP, and WAIT low-power modes. The 48-LQFP package measures 7x7 mm and supports standard surface-mount assembly with an exposed-pad thermal path for improved heat dissipation. From an architectural standpoint, the HC08AP family uses a unified memory map, Harvard-style bus architecture for simultaneous instruction fetch and data access, and on-chip in-system programmable Flash. The integrated 10-bit ADC typically provides 8 to 15 channels depending on variant, supporting both single-ended and differential conversions. Hardware timers, a serial communications interface (SCI), and a serial peripheral interface (SPI) round out the peripheral set, enabling motor control, sensor aggregation, and human-machine interface (HMI) functions on a single chip. Typical applications include industrial automation controllers, white-goods and appliance control boards, HVAC damper and thermostat actuators, automotive body and chassis ECUs (non-safety), low-end point-of-sale terminals, and general-purpose embedded control where cost per node is the dominant constraint. Engineers most often select this part for its mature toolchain (CodeWarrior HC08, Cosmic, IAR), deterministic interrupt latency, and robust Flash security features. When designing with this device, plan for an external decoupling capacitor network near VDD/VSS pins and reserve the RESET pin for a proper supervisory reset circuit. The part is approaching end-of-life; new designs should evaluate modern Kinetis (Cortex-M0/M4) or S08 successors for long-term availability while preserving the HC08 family for legacy maintenance and cost-down retrofits. This page synthesizes distributor pricing, verified pin-compatible HC08 family alternatives, and practical design notes not found in the original NXP datasheet, including migration paths to active Kinetis and S08 families.

询价 联系我们
MC908AP32CFAER - 8MHz 8-bit HC08 MCU 32KB Flash 48-LQFP | NXP (Tape & Reel)
MC908AP32CFAER

MC908AP32CFAER - 8MHz 8-bit HC08 MCU 32KB Flash 48-LQFP | NXP (Tape & Reel)

The NXP MC908AP32CFAER is an 8-bit HC08-family microcontroller with 32KB of on-chip Flash program memory, 2KB of RAM, and a 10-bit ADC, housed in a 48-pin LQFP (7x7 mm) package. It executes instructions from an enhanced M68HC08 CPU08 core at up to 8MHz and supports dual-voltage operation at 3.3V or 5V for flexible system integration. The part is specified across an industrial temperature range and exposes 32 general-purpose I/O lines for peripheral interfacing. An 8-bit microcontroller (MCU) is a small, self-contained processor-on-a-chip that integrates a CPU, non-volatile program memory (Flash/ROM), volatile working memory (RAM), and a fixed set of peripherals such as timers, communication controllers, and analog-to-digital converters. Within the broader taxonomy of embedded computing, the MCU sits below microprocessors (MPUs) and is classified as a microcontroller -> embedded processor -> integrated circuit -> semiconductor. The HC08 family is part of the legacy M68HC08 lineage originally developed by Motorola and now sustained by NXP (formerly Freescale) for cost-sensitive, deterministic embedded control applications. Key features of the MC908AP32CFAER include 32KB (32K x 8) of Flash memory for program storage, 2KB of general-purpose RAM, an integrated 10-bit analog-to-digital converter (ADC) for sensor interfacing, an internal oscillator that reduces external BOM, and 32 GPIO lines multiplexed with on-chip peripherals. The CPU08 core executes a CISC instruction set with extensions such as BGND, STOP, and WAIT low-power modes. The 48-LQFP package measures 7x7 mm and supports standard surface-mount assembly with an exposed-pad thermal path for improved heat dissipation. From an architectural standpoint, the HC08AP family uses a unified memory map, Harvard-style bus architecture for simultaneous instruction fetch and data access, and on-chip in-system programmable Flash. The integrated 10-bit ADC typically provides 8 to 15 channels depending on variant, supporting both single-ended and differential conversions. Hardware timers, a serial communications interface (SCI), and a serial peripheral interface (SPI) round out the peripheral set, enabling motor control, sensor aggregation, and human-machine interface (HMI) functions on a single chip. Typical applications include industrial automation controllers, white-goods and appliance control boards, HVAC damper and thermostat actuators, automotive body and chassis ECUs (non-safety), low-end point-of-sale terminals, and general-purpose embedded control where cost per node is the dominant constraint. Engineers most often select this part for its mature toolchain (CodeWarrior HC08, Cosmic, IAR), deterministic interrupt latency, and robust Flash security features. When designing with this device, plan for an external decoupling capacitor network near VDD/VSS pins and reserve the RESET pin for a proper supervisory reset circuit. The part is approaching end-of-life; new designs should evaluate modern Kinetis (Cortex-M0/M4) or S08 successors for long-term availability while preserving the HC08 family for legacy maintenance and cost-down retrofits. This page synthesizes distributor pricing, verified pin-compatible HC08 family alternatives, and practical design notes not found in the original NXP datasheet, including migration paths to active Kinetis and S08 families.

询价 联系我们
MC908AP32CFBE - 8-Bit HC08 MCU 32KB Flash 44-QFP | NXP
MC908AP32CFBE

MC908AP32CFBE - 8-Bit HC08 MCU 32KB Flash 44-QFP | NXP

The NXP (Freescale) MC908AP32CFBE is an 8-bit HC08 microcontroller with 32KB (32K x 8) FLASH program memory, an 8MHz maximum bus clock, a 10-bit ADC, and a 44-pin QFP (10x10 mm) package. It is a member of the low-cost, high-performance M68HC08 family built around the enhanced CPU08 CISC core. An 8-bit microcontroller is a single-chip embedded processor that integrates a CPU core, program memory (FLASH), RAM, timers, analog-to-digital conversion, and general-purpose I/O on one die, sitting at the entry level of the microcontroller hierarchy (MCU -> embedded processor -> integrated circuit). The HC08 family was widely deployed in cost-sensitive industrial and appliance control before the industry migrated to ARM-based MCUs. Key features of the MC908AP32CFBE include 32KB of in-system-programmable FLASH with sector erase, a 10-bit ADC for analog sensor inputs, a high-speed timer module for PWM generation and input capture, and low-power operation modes (wait and stop) suited to battery- and energy-conscious designs. The CPU08 core delivers efficient CISC instruction execution at up to 8MHz, with a background debug mode for in-circuit development without costly emulators. Architecturally, the device combines the CPU08 core with on-chip FLASH, SRAM, a watchdog (COP), oscillator options, and serial and timer peripherals. The 3.3V/5V supply flexibility (per distributor listings of this family) and the 44-pin PQFP format with 10x10mm body make it suitable for compact two- and four-layer industrial PCBs with through-hole-equivalent serviceability. Typical applications include small motor control, appliance and white-goods control panels, industrial sensor nodes, battery chargers, and legacy communication modules - anywhere a modest 8-bit core with integrated ADC and FLASH keeps bill-of-materials cost low. When designing with this device, verify bus frequency versus supply voltage per the datasheet, and note that NXP lists this part as End of Life - new designs should not start here; existing designs should plan a replacement. This page synthesizes distributor data, lifecycle status, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

询价 联系我们