微控制器

产品（20,000+)

MCF53011CQT240 - ColdFire V3 MPU, 240MHz, 208-TQFP | NXP
MCF53011CQT240

MCF53011CQT240 - ColdFire V3 MPU, 240MHz, 208-TQFP | NXP

The NXP MCF53011CQT240 is a 32-bit ColdFire V3 microprocessor unit (MPU) operating at up to 240 MHz, housed in a 208-pin TQFP (28x28 mm) package. It integrates a Version 3 ColdFire core with EMAC delivering up to 211 Dhrystone 2.1 MIPS, a 16 KByte unified instruction/data cache, 128 KBytes of internal SRAM, and a ROMless external memory interface. The device is fabricated in a low-power CMOS process and is targeted at industrial control with embedded voice applications. What is a ColdFire microprocessor? A ColdFire microprocessor is a 32-bit RISC-style processor architecture originally derived from the Motorola 68000 family, designed by NXP (formerly Freescale) for cost-sensitive, low-power embedded applications. Positioned in the taxonomy as: microprocessor (MPU) > 32-bit MPU > ColdFire family > ColdFire V3 core > semiconductor, ColdFire V3 parts combine moderate computational performance with low power consumption and rich peripheral integration, making them well suited to industrial control, point-of-sale, and embedded audio applications. Key features of the MCF53011CQT240 include a fast Ethernet MAC (EMAC) with MII/RMII interface for industrial networking, USB 2.0 Full-Speed and Host/Device On-the-Go (OTG) controllers, a voice codec interface with multiple time-division-multiplexed (TDM) channels, CAN 2.0B controller for industrial fieldbus connectivity, and a peripheral set covering UARTs, I2C, SPI, and GPIOs. The integrated eSDHC and external bus interface support NAND flash, SDRAM, and SRAM memory expansion. Architecturally, the ColdFire V3 core uses a variable-length instruction pipeline and Harvard-style split cache for instruction and data, allowing deterministic interrupt latency that is critical in real-time control loops. The dual-issue capabilities and dedicated multiply/accumulate (MAC) hardware accelerate DSP-style signal processing required by the integrated voice codec engine. Typical applications include industrial control with embedded voice (intercom, public-address, and VoIP-style appliances), human-machine interface (HMI) terminals, point-of-sale terminals with audio feedback, factory automation PLCs with Ethernet connectivity, and medical/automation equipment requiring multi-protocol industrial networking. The combination of CAN + Ethernet + USB + voice codec removes several external ICs from a typical BOM, reducing board area and cost in compact embedded designs. When designing with the MCF53011CQT240, follow the manufacturer reference design for power-rail decoupling and external bus termination. Place at least four 0.1 uF decoupling capacitors near each power pin, route the 50 MHz system clock with controlled impedance, and ensure the SDRAM traces are length-matched to the data strobe signals. The TQFP-208 package requires multilayer PCB stack-up for high-speed signal integrity. This page synthesizes distributor pricing, pin-compatible drop-in alternatives within the MCF5301x family, and practical PCB and firmware design notes not consolidated in a single place in the manufacturer datasheet.

询价 联系我们
MCF53012CQT240 - 32-Bit 240MHz ROMless MCU | NXP
MCF53012CQT240

MCF53012CQT240 - 32-Bit 240MHz ROMless MCU | NXP

The NXP Semiconductors MCF53012CQT240 is a 32-bit, 240 MHz ColdFire V3 ROMless microcontroller in a 208-pin TQFP package measuring 28 mm by 28 mm. It belongs to the MCF5301x family and is designed for embedded systems requiring high-performance control, Ethernet connectivity, USB OTG, serial interfaces, and programmable peripherals. The verified listing identifies its core processor as ColdFire V3, core size as 32-bit, speed as 240 MHz, and program memory as ROMless. A microcontroller is a semiconductor device that integrates a processor core, memory interfaces, communication peripherals, timers, interrupt control, and I/O into one integrated circuit. In the product hierarchy, this device is a 32-bit embedded microcontroller, part of the broader semiconductor and embedded-processing categories. Its ROMless architecture requires an external boot or program-memory solution, making the part suitable for systems where firmware storage, code execution, or product configuration must be external. The MCF53012CQT240 provides connectivity identified in the verified data as EBI/EMI, Ethernet, I2C, memory card, SPI, SSI, UART/USART, and USB OTG. The listed peripherals include DMA, PWM, and WDT. These resources support designs involving network-connected embedded equipment, industrial control, communications gateways, data acquisition, and peripheral control. The verified product description reports 61 I/O, while the listed package has 208 terminals. The device is identified as obsolete in the verified manufacturer-related listing, so lifecycle planning should account for long-term sourcing and design migration. Because this page uses only supplied verified data, details such as supply voltage, memory sizes, electrical limits, temperature range, pin names, and detailed package dimensions beyond the stated 28 mm by 28 mm are not inferred. Use the manufacturer datasheet and package drawings for schematic capture, decoupling, clocking, boot configuration, and PCB layout decisions. Typical engineering use includes industrial automation, Ethernet-connected controllers, USB-enabled embedded systems, serial bridges, memory-card interfaces, and real-time peripheral control. The 240 MHz ColdFire V3 core provides the processing headroom for control logic and communication stacks, while DMA and PWM support efficient data movement and timing-sensitive output generation. Its large 208-pin package exposes extensive external connectivity but requires careful escape routing and multilayer PCB design. A key design consideration is that the ROMless device depends on external program memory or a suitable boot arrangement. Confirm memory-interface compatibility, boot configuration, power sequencing, clock sources, peripheral pin multiplexing, and external transceiver requirements before layout release. Do not assume pin compatibility or drop-in replacement status without checking the exact package and datasheet. This page synthesizes the verified product identity, connectivity, package, lifecycle, sourcing links, and selection considerations available for MCF53012CQT240. It separates verified facts from unavailable parameters and avoids inventing electrical or pin-level details that are not present in the supplied data.

询价 联系我们
MCF53013CQT240 - 240MHz ColdFire V3 MPU | NXP | TQFP-208
MCF53013CQT240

MCF53013CQT240 - 240MHz ColdFire V3 MPU | NXP | TQFP-208

The NXP Semiconductors MCF53013CQT240 is a 32-bit ColdFire Version 3 microprocessor with EMAC, operating at 240 MHz in a 208-pin LQFP package. It is ROMless, uses a 28 mm by 28 mm package, and is identified by distributor data as the MCF5301x family part suited to embedded voice, networking, and industrial control designs. A microprocessor is the central processing element of an embedded system. It executes instructions, controls memory and peripherals, and connects external hardware through dedicated interfaces. The MCF5301x family combines the ColdFire processor core with connectivity peripherals and, according to the available part description, a voice codec and amplifiers. This places it above a basic microcontroller in the product hierarchy: microprocessor, embedded processor, semiconductor, and power-management-dependent system component. Key verified features include a Version 3 ColdFire core, EMAC support, 240 MHz operation, 211 Dhrystone 2.1 MIPS performance, a 16 Kbyte unified instruction/data cache, and 128 Kbytes of additional memory described in the available data. The ROMless designation means external program memory is required, which allows deployment-specific firmware to be selected while keeping the processor package independent of fixed embedded software. The device is also identified as a ColdFire V3 MCF5301x part with integrated voice-oriented functions. The MCF53013CQT240 is therefore relevant to voice-over-IP gateways, embedded telephony equipment, networked control systems, and industrial communication products where a higher-performance processor and multiple interfaces are useful. The 208-pin LQFP provides the package pin count required for the device's integrated peripherals. Because the exact pin names, memory-map details, electrical limits, and peripheral assignments were not included in the supplied verified data, this page does not infer them. The manufacturer datasheet should be consulted for authoritative pinout, voltage limits, clock requirements, decoupling, and application schematics before hardware is released to production. For sourcing and lifecycle decisions, the available distributor records should be treated as time-sensitive. The supplied search snapshot was fetched on 2026-10-20, while one distributor listing reports a reference quantity and price. Inventory, lifecycle status, exact package markings, and delivery commitments must be reconfirmed with the authorized supplier before ordering. This page combines verified distributor product data, ColdFire family details, application context, sourcing constraints, and explicit engineering gaps so engineers can distinguish documented facts from information that still requires datasheet validation.

询价 联系我们
MCF53014CMJ240 - ColdFire V3 MCU 240MHz, 256-MAPBGA | NXP
MCF53014CMJ240

MCF53014CMJ240 - ColdFire V3 MCU 240MHz, 256-MAPBGA | NXP

The NXP (formerly Freescale) MCF53014CMJ240 is a 32-bit ColdFire V3 microprocessor unit operating at 240 MHz, packaged in a 256-ball MAPBGA (17 mm x 17 mm) plastic RoHS-compliant housing. The device delivers up to 211 Dhrystone 2.1 MIPS at the rated clock and integrates 16 KBytes of unified instruction/data cache alongside 128 KBytes of internal SRAM with standby power support. It is designed for industrial-grade embedded applications combining deterministic control with on-chip connectivity. A microprocessor (MPU) is the highest-level processing element in an embedded system, executing application code, handling interrupts, and coordinating peripherals. The MCF53014CMJ240 belongs to the ColdFire family, a scalable 68k-derived architecture from NXP optimized for low-power, high-integration designs, sitting architecturally between 8-bit microcontrollers and full application processors. It includes an integrated 10/100 Ethernet MAC (EMAC), USB OTG, and other connectivity peripherals. Key features of the MCF53014CMJ240 include 240 MHz ColdFire V3 core performance, 16 KB unified L1 cache, 128 KB internal SRAM with standby power support, 10/100 Ethernet MAC for networked industrial control, USB OTG host/device capability, ROMless boot from external flash, integrated crossbar switch, and an industrial -40C to +85C operating temperature range. The integrated peripherals reduce board complexity and BOM cost while supporting common industrial connectivity standards. The ColdFire V3 architecture uses a variable-length instruction set with both A- and B-line ColdFire ISA features, an enhanced MAC module for DSP-style operations, and a Harvard-style cache structure that delivers high code density while retaining deterministic interrupt response. The 128 KB SRAM is partitioned for low-leakage standby retention, allowing fast context save/restore in power-managed designs without external memory accesses. A bus crossbar arbitrates concurrent transfers between the core, EMAC, USB, and DMA, eliminating single-master bottlenecks. Typical applications include industrial control with embedded voice/audio processing, networked sensor gateways, factory automation controllers, embedded HMI front-ends, and remote monitoring/telemetry devices. The on-chip Ethernet MAC and USB OTG make it well suited for IP-connected industrial nodes where deterministic control and local diagnostics coexist on the same board. When designing with the MCF53014CMJ240, plan for an external boot flash (ROMless), supply decoupling per the Freescale/NXP reference design, and careful 256-ball BGA fan-out for PCB escape. JTAG/BDM is required for in-system debug and boundary scan. This page synthesizes distributor pricing, drop-in compatible ColdFire V3 alternatives in the same 256-ball MAPBGA, and practical design notes not found in the standalone datasheet.

询价 联系我们
MCF53014CMJ240J - 240MHz ColdFire V3 32-Bit MPU | NXP
MCF53014CMJ240J

MCF53014CMJ240J - 240MHz ColdFire V3 32-Bit MPU | NXP

The NXP Semiconductors MCF53014CMJ240J is a 32-bit ColdFire V3 microprocessor operating at 240 MHz, integrating Ethernet and voice-codec connectivity for industrial embedded control. It is packaged as a 256-ball MAPBGA measuring 17 mm by 17 mm and is identified as a ROMless part. The verified source data lists 83 I/O, 128 KB internal SRAM, a 16 KB unified instruction/data cache, and connectivity including EBI/EMI, Ethernet, I2C, memory card, SPI, SSI, UART/USART, USB, and USB OTG. A microprocessor such as the MCF53014 is a higher-level computing device than a microcontroller: it executes an instruction set, manages memory, coordinates peripherals, and supports embedded operating systems or real-time control software. The ColdFire V3 architecture combines that general-purpose processing role with integrated connectivity, allowing an industrial controller to handle networking and embedded voice functions without requiring separate interface devices. Its 240 MHz operating frequency provides a concrete performance point for control-loop, communications, and human-interface workloads. Verified features include Version 3 ColdFire processing with EMAC, 211 Dhrystone 2.1 MIPS at 240 MHz, a 16 KB unified instruction/data cache, and 128 KB internal SRAM. The internal SRAM includes standby power-supply support, while the peripheral mix includes DMA, PWM, and a watchdog timer. The processor is a ROMless device, so production designs must provide external nonvolatile boot storage rather than relying on integrated program memory. The 256-MAPBGA package and industrial temperature grade position the device for embedded industrial-control platforms rather than general commercial hobby use. Its external bus and serial interfaces support connections to memory, storage, audio circuitry, communications equipment, and human-interface modules. The Ethernet MAC and USB connectivity are especially relevant to gateways, terminals, and voice-enabled industrial equipment, while the watchdog and DMA resources support reliable real-time system behavior. A primary design consideration is package complexity. A 256-ball BGA requires careful PCB escape routing, via-in-pad or via-under-bump strategies where required, controlled impedance, adequate power-plane integrity, and assembly-process validation. Designers should also verify external memory support, boot-memory requirements, pin multiplexing, and power sequencing against the manufacturer data sheet before layout release. The verified sources identify the package as 17 mm by 17 mm MAPBGA-256, but the complete public pinout was not included in the supplied evidence.

询价 联系我们
MCF53015CMJ240J - ColdFire V3 MPU 240MHz | 256-MAPBGA | NXP
MCF53015CMJ240J

MCF53015CMJ240J - ColdFire V3 MPU 240MHz | 256-MAPBGA | NXP

The NXP MCF53015CMJ240J is a 32-bit ColdFire V3 core microprocessor unit (MPU) operating at 240 MHz with a ROMless architecture, integrated in a 256-ball MAPBGA (17x17 mm) package. According to the verified NXP distributor listings, the device combines low-power operation, high integration, and connectivity peripherals with a built-in voice codec, targeting industrial control and embedded voice applications. The part is marked Last Time Buy per the latest distributor data, indicating end-of-life planning has begun. A ColdFire V3 MPU is a member of the ColdFire microprocessor family - a 32-bit architecture derived from the original Motorola 68000 instruction set and optimized for embedded control. Within the broader semiconductor hierarchy, this places the MCF53015 as a microprocessor -> 32-bit MPU -> ColdFire V3 core -> embedded MPU. Compared with general-purpose microcontrollers (MCUs), MPUs typically have no integrated flash and rely on external memory, allowing larger program footprints and higher operating frequencies. Key features include the ColdFire V3 core with EMAC (Enhanced Multiply-Accumulate) for DSP-like signal processing, on-chip Ethernet MAC, USB OTG, DMA, PWM, and a watchdog timer. The integrated voice codec and 83 GPIO lines support direct connection to audio transducers and human-machine interface peripherals without external codecs, reducing BOM cost. Typical applications include industrial control with embedded voice prompting, point-of-sale terminals, secure access control panels, networked audio appliances, and human-machine interface (HMI) panels requiring TCP/IP connectivity plus low-latency audio. The integrated Ethernet MAC and SSI bus support both data telemetry and audio streaming in the same design. Designers should plan for external SDRAM and flash due to the ROMless architecture, and verify the Last Time Buy date with NXP before committing to new designs. This page synthesizes distributor pricing, Last Time Buy alternatives, and design considerations not consolidated in the manufacturer datasheet.

询价 联系我们
MCF53016CMJ240J - 240MHz 32-Bit ROMless MPU | NXP
MCF53016CMJ240J

MCF53016CMJ240J - 240MHz 32-Bit ROMless MPU | NXP

The NXP Semiconductors MCF53016CMJ240J is a 240 MHz, 32-bit ColdFire V3 microprocessor with an Ethernet media access controller, ROMless configuration, and voice-oriented connectivity peripherals, housed in a 256-map BGA package measuring 17 x 17 mm. It combines an embedded voice codec, Ethernet MAC, and general-purpose control processing in one highly integrated system-on-chip. The 240 J speed designation denotes the 240 MHz operating class stated by the distributor data, while the CMJ package designation identifies the 256-map BGA form used by this MPN. A microprocessor is the central programmable controller in an embedded system. Unlike a microcontroller family centered on tightly coupled internal memory and peripherals, this ROMless ColdFire processor is intended to use external program and data memory. That architecture separates software storage from the processor, providing greater memory flexibility but requiring careful bus, boot, and memory-system design. The ColdFire V3 core belongs to the broader 32-bit microprocessor and embedded-controller hierarchy. Verified source data identifies the part as a ColdFire V3 MCF5301x device with an Ethernet media access controller. It is specifically described for industrial control with embedded voice applications, combining low-power operation, high integration, connectivity peripherals, and a voice codec. Its 256-terminal BGA package provides a dense interface for external memory and system connectivity, but it also requires multilayer PCB construction, careful escape routing, and assembly processes capable of handling fine-pitch balls. The MCF53016CMJ240J is ROMless, so firmware must be stored in external nonvolatile memory and loaded or mapped according to the system architecture. This makes the processor suitable for designs where updateable code, large program images, or shared memory access are valuable. The integrated codec supports voice-processing designs, while the Ethernet MAC provides a path to networked industrial equipment. However, Ethernet PHY integration, memory technology, signal integrity, and boot behavior must be verified from the full manufacturer documentation before schematic release. Typical uses include embedded voice-over-IP terminals, industrial controllers, networked embedded equipment, and communication appliances that benefit from a high-performance 32-bit processor. The 240 MHz class is relevant to real-time protocol processing, but total system throughput still depends on memory latency, bus behavior, cache configuration, peripheral utilization, and firmware quality. The main layout consideration is the 256-map BGA package. Place the processor, memory, Ethernet physical layer, codec support circuitry, and required clock circuitry according to the manufacturer’s reference design and pin constraints. Validate power and ground distribution, high-speed routing, via geometry, and thermal performance before fabrication. Because the supplied web results provide only a datasheet landing page and distributor summaries, unverified electrical limits must not be inferred. This page consolidates verified product identity, package information, sourcing references, and engineering considerations. It distinguishes documented values from missing parameters and does not treat search-result page counts, distributor availability, or generic cross-reference tools as proof of electrical compatibility or drop-in equivalence.

询价 联系我们
MCF53017CMJ240 - 240MHz 32-Bit ColdFire Processor | NXP
MCF53017CMJ240

MCF53017CMJ240 - 240MHz 32-Bit ColdFire Processor | NXP

NXP Semiconductors MCF53017CMJ240 is a 32-bit ColdFire Version 3 microprocessor operating at 240 MHz, supplied in a 3.3 V 256-ball MAP-BGA package. The supplied product data identifies the device as a ROMless industrial-temperature embedded processor and highlights its Ethernet media access controller capability. It is positioned for communication-oriented embedded systems requiring a high-performance 32-bit RISC architecture, external memory interfaces, and integrated network connectivity. What is a ColdFire processor? ColdFire is a 32-bit RISC microprocessor architecture derived from the Motorola 68k family. It combines a compact instruction set with an embedded processor integration model, allowing a system to combine processor execution, memory interfaces, communications peripherals, and security-oriented Ethernet connectivity. In the broader semiconductor hierarchy, the MCF53017 is an embedded microprocessor rather than a general-purpose desktop CPU or a small microcontroller. The verified product listing identifies a 240 MHz operating frequency, 3.3 V supply, 256-ball package, industrial temperature grade, and an Ethernet media access controller. The MCF53017 family is described by its Version 3 ColdFire core. These characteristics make the device suitable for industrial networking equipment, communications infrastructure, protocol gateways, embedded control systems, and equipment requiring a dedicated 32-bit processing engine. Because the MCF53017CMJ240 is a ROMless device, an external memory source is required for application boot code and program storage. The package also makes PCB layout, escape routing, thermal management, and manufacturing process control important engineering concerns. A 256-ball BGA footprint is substantially more demanding than a leaded package or a small low-pin-count MCU, particularly during inspection, rework, and prototype assembly. The processor should be selected only when its documented operating conditions, pinout, memory interface, Ethernet requirements, and package design are matched to the system architecture. The target MPN is associated with industrial-temperature product data, but the supplied source set does not provide a complete manufacturer datasheet parameter table, electrical limits, or current lifecycle designation. Those values should be confirmed against the applicable MCF53017 technical reference and procurement record before production release. This page consolidates the verified distributor and manufacturer-related search results, package information, application context, source URLs, and engineering caveats for MCF53017CMJ240. It distinguishes documented facts from unavailable parameters and does not substitute guessed specifications for missing data.

询价 联系我们
MCF53017CMJ240J - 240MHz ColdFire V3 MPU | NXP
MCF53017CMJ240J

MCF53017CMJ240J - 240MHz ColdFire V3 MPU | NXP

The NXP MCF53017CMJ240J is a 32-bit ColdFire V3 microprocessor operating at 240 MHz, packaged in a 256-ball MAPBGA measuring 17 mm by 17 mm. It is a ROMless microprocessor intended for industrial control and embedded voice systems, combining a high-integration processor core with connectivity peripherals and a voice codec. The verified listing identifies Ethernet, USB, USB OTG, SPI, SSI, I2C, UART/USART, memory-card, EBI/EMI, DMA, PWM, and watchdog connectivity. What is a ColdFire V3 microprocessor? A ColdFire V3 microprocessor is a 32-bit embedded processor within the ColdFire family of RISC processors. It provides substantially more processing capability than a small 8-bit or 16-bit controller while integrating communication and timing resources needed by industrial control equipment. In the product hierarchy, it sits between a general-purpose microprocessor and a microcontroller-oriented system-on-chip. The most prominent verified specifications are a 240 MHz operating frequency, 32-bit architecture, ROMless configuration, and 256-ball MAPBGA package. The part is listed as industrial temperature grade by a distributor and as last-time-buy by another result, so procurement should be planned carefully. Its 83 I/O count and broad peripheral set support connected embedded products, but the supplied data does not provide complete memory, voltage, power, or timing values. The MCF5301x family is positioned for industrial control with embedded voice applications. Its voice-codec integration can reduce the need for a separate audio interface, while Ethernet and USB support broader connectivity. The ROMless architecture means external program memory is required according to the system memory design; exact memory-device requirements are not available in the verified data. A critical design consideration is that this is a high-pin-count BGA device with 256 balls and a 17 mm by 17 mm footprint. Layout, routing, thermal performance, and manufacturing capability must be validated before release. The supplied evidence does not provide the complete pinout, recommended memory configuration, power-supply limits, or package thermal resistance, so those values must be confirmed from the manufacturer datasheet before schematic or PCB sign-off. This product data combines verified distributor availability, lifecycle information, package information, and application positioning with practical sourcing and design guidance. It does not invent missing electrical parameters or claim a drop-in replacement where verified compatibility evidence is absent.

询价 联系我们
MCF5307AI66B - ColdFire V3 32-bit 66MHz MCU | NXP
MCF5307AI66B

MCF5307AI66B - ColdFire V3 32-bit 66MHz MCU | NXP

The NXP Semiconductors MCF5307AI66B is a 32-bit ColdFire V3 microprocessor (MCU) running at 66 MHz with on-chip 4 KB SRAM and ROMless program memory, housed in a 208-pin FQFP (28x28 mm) surface-mount package. A ColdFire microprocessor is a 32-bit embedded processor derived from the Motorola 68000 (M680x0) architecture. The ColdFire family spans the V1 through V4 core generations, sitting within the broader hierarchy of CISC-heritage embedded processors used in industrial control, networking, and instrumentation. The V3 core in the MCF5307 executes the ColdFire instruction set with a multiply-accumulate (MAC) module for DSP-style arithmetic, delivering approximately 70 MIPS of sustained performance for embedded control applications. Key features of the MCF5307 include a highly integrated system-on-chip design combining the V3 core with a DRAM controller, a direct memory access (DMA) controller, programmable interrupt controller, timers, parallel interface, and serial interfaces including I2C and UART/USART. The 4 KB internal SRAM can be used as tightly-coupled scratchpad memory for time-critical code or data, reducing bus traffic on the external bus interface (EBI/EMI). Technically, the MCF5307 is ROMless: program code executes from external flash or DRAM via the integrated DRAM controller and external bus interface. Peripherals include DMA, power-on reset (POR), and a watchdog timer (WDT). Sixteen general-purpose I/O lines are available, and the processor operates as a single-core 32-bit device at 66 MHz, offering a cost-effective balance of performance and integration for legacy embedded designs. Typical applications include industrial embedded control systems, factory automation controllers, networking equipment line cards, and legacy instrumentation upgrades where existing ColdFire code bases must be maintained. A key design consideration is that the MCF5307AI66B is designated End-of-Life by NXP and is Not Recommended for New Designs; new projects should evaluate ColdFire successors such as the MCF52xx or MCF53xx family variants, and existing designs should plan last-time-buy inventory strategies. This page synthesizes distributor pricing, availability from multiple sources, and lifecycle status information not consolidated in the manufacturer product listing.

询价 联系我们
MCF5307CAI66B - ColdFire V3 32-bit MPU 66MHz | NXP Semiconductors
MCF5307CAI66B

MCF5307CAI66B - ColdFire V3 32-bit MPU 66MHz | NXP Semiconductors

The NXP Semiconductors MCF5307CAI66B is a 32-bit ColdFire V3 microprocessor running at 66 MHz (up to 70 MIPS), housed in a 208-pin FQFP (28x28 mm) tray package. It is a high-performance, cost-effective, highly integrated MPU designed for embedded control applications, combining a ColdFire V3 core with a multiply-accumulate (MAC) module, DRAM controller, DMA controller, timers, and parallel/serial interfaces. A microprocessor (MPU) is an integrated circuit that contains the CPU, control unit, and on-chip peripherals in a single device. Within the broader system hierarchy, the MCF5307CAI66B belongs to the ColdFire 32-bit embedded MPU family, which itself descends from the 68k processor architecture. ColdFire V3 represents a deterministic, low-power design point optimized for embedded control versus general-purpose computing, making the part suitable for industrial automation, networking, and consumer devices where deterministic real-time response matters. Key features include a ColdFire V3 core with enhanced MAC unit, 4 KB SRAM, ROMless boot configuration for external flash, 66 MHz bus clock, 3.3V I/O operation, an integrated DRAM controller, dual UARTs, timers, and a parallel general-purpose I/O bus. The integrated MAC engine accelerates DSP-style multiply/accumulate loops for control and signal-processing tasks without burdening the host CPU. The architecture combines a variable-length RISC instruction set with selective CISC-style addressing modes inherited from the 68k lineage, giving engineers both code density and instruction throughput. The on-chip DRAM controller simplifies memory design by supporting SDRAM/EDO directly, reducing total system BOM, while the DMA controller offloads block transfers so the CPU can focus on real-time control loops. Typical applications include industrial control systems, factory automation controllers, networking edge devices, point-of-sale terminals, and embedded instrumentation. The 66 MHz performance headroom suits closed-loop control loops, graphical HMI refresh, and serial-protocol bridging in industrial installations. Design considerations include 3.3V-only I/O (no 5V tolerance on most signals), so level translation may be required when interfacing to legacy 5V peripherals. Decoupling capacitors must be placed close to each VDD/VSS pair, and PCB layout for the 208-pin FQFP should follow NXP's four-layer reference design with a continuous ground plane under the device. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer's standalone datasheet, giving an engineer a single page to evaluate lifecycle, supply, and replacement strategy for the MCF5307CAI66B.

询价 联系我们
MCF5307CAI90B - ColdFire V3 32-Bit MPU, 90MHz, 208-FQFP | NXP
MCF5307CAI90B

MCF5307CAI90B - ColdFire V3 32-Bit MPU, 90MHz, 208-FQFP | NXP

The NXP Semiconductors MCF5307CAI90B is a high-performance 32-bit ColdFire V3 microprocessor delivering up to 70 MIPS at a 90 MHz core clock, housed in a 208-pin FQFP (28 mm x 28 mm) package. It integrates a multiply-accumulate (MAC) module, a DRAM controller, a four-channel DMA controller, timers, and parallel and serial interfaces on a single die, targeting cost-sensitive embedded control designs. A microprocessor (MPU) is an integrated processor that contains the central processing unit, on-chip peripherals, memory interfaces, and bus controllers needed to run an embedded system. The MCF5307 belongs to the ColdFire family (a Motorola/Freescale/NXP 32-bit M68k-derivative architecture), sitting in the hierarchy MPU -> embedded processor -> ColdFire family -> ColdFire V3 core -> integrated microprocessor. It is designed for designers who need deterministic 32-bit performance with rich peripheral integration without the complexity of external ASIC glue logic. Key features include a 32-bit ColdFire V3 core with MAC for DSP-like arithmetic, a 90 MHz core clock delivering 70 MIPS of integer throughput, a 32-bit DRAM controller supporting FPM/EDO/SDRAM, four DMA channels, three timer modules, dual UARTs, an I2C interface, a QSPI port, and a 16-bit general-purpose parallel port. The 208-FQFP package offers generous I/O for industrial and networking designs. Typical applications include industrial automation controllers, networking edge devices, point-of-sale terminals, building automation gateways, and embedded instrumentation. The on-chip DRAM controller and MAC unit make it well suited to control loops and protocol conversion without external DSP chips. When designing with this device, allocate at least 4 KB of SRAM for boot vectors and consider external bus mastering carefully because the integrated DMA and DRAM controller share the same external memory bus as the CPU.

询价 联系我们
MCF5307FT66B - 66MHz ColdFire V3 MCU 208-FQFP | NXP
MCF5307FT66B

MCF5307FT66B - 66MHz ColdFire V3 MCU 208-FQFP | NXP

The NXP MCF5307FT66B is a 32-bit ColdFire V3 microcontroller MCU running at 66 MHz, packaged in a 208-pin FQFP (28x28 mm) and offered in a ROMless configuration with 4 KB of on-chip SRAM. It belongs to the MCF530x family and provides a low-cost general-purpose peripheral set tailored for embedded industrial and networking applications, presenting a compelling upgrade path for existing 68K and ColdFire designs. A microcontroller (MCU) is an integrated circuit that combines a processor core, program and data memory, and a set of on-chip peripherals on a single die. Within the ColdFire V3 hierarchy, the MCF5307 sits between simple 8/16-bit controllers and higher-performance application processors. It supports external memory addressing, allowing ROMless designs to attach external Flash and SRAM as the system requires - useful when code density or in-field firmware updates are required. ColdFire implements a variable-length instruction set (ISA_B) that retains a high degree of source compatibility with legacy Motorola 68K code, easing porting efforts. Key features of the MCF5307FT66B include a Version 3 ColdFire core with hardware multiply/accumulate, 4 KB unified SRAM, an external memory controller supporting ROM, SRAM, and DRAM, a flexible peripheral set including timers, serial interfaces, and a system integration module. Operating voltage is 3.3 V (typical) and the device integrates clock generation and reset management. The 208-FQFP (28x28 mm) surface-mount package provides 16 GPIO-equivalent lines and supports industrial temperature grades per device marking. Technically, the MCF5307 separates its peripheral bus from the CPU core bus, enabling simultaneous DMA and CPU activity with minimal contention. The 66 MHz core clock combined with the V3 pipeline delivers sustained throughput adequate for protocol stacks such as TCP/IP, USB device class stacks, and industrial fieldbus firmware. The 208-FQFP footprint offers 16 dedicated user I/O pins plus all peripheral and address/data pins, allowing direct interface to external memory and logic. Typical applications include industrial control and HMI terminals, factory automation controllers, embedded networking appliances, point-of-sale terminals, and upgrade platforms for legacy 68K designs. It is well-suited wherever a low-cost 32-bit MCU with a familiar instruction set and external memory expansion is preferred over SoC alternatives. When designing with the MCF5307FT66B, allocate PCB space carefully around the 208-FQFP land pattern and route address/data bus traces with matched impedance. Use external watchdog and supervisor circuits for safety-critical applications, and place bypass capacitors adjacent to all VDD/VSS pin pairs to limit core noise on the 3.3 V rail. This page synthesizes distributor pricing, drop-in alternatives, and design considerations specifically for the MCF5307FT66B, complementing the manufacturer datasheet with cross-reference and selection guidance.

询价 联系我们
MCF5307FT90B - 90MHz ColdFire V3 MCU ROMless 208-FQFP | NXP
MCF5307FT90B

MCF5307FT90B - 90MHz ColdFire V3 MCU ROMless 208-FQFP | NXP

The NXP MCF5307FT90B is a 32-bit ColdFire V3 microprocessor (MCU) running at 90 MHz with ROMless architecture, housed in a 208-pin FQFP (28x28 mm) surface-mount package. It integrates the ColdFire V3 core with on-chip peripherals, EMAC, USB, and external memory controller for embedded industrial and networking designs. The MCF5307FT90B belongs to the MCF530x family originally introduced by Motorola Freescale and now maintained by NXP Semiconductors. A microcontroller (MCU) is a single-chip computer containing a processor core, memory, and programmable I/O peripherals. The ColdFire V3 architecture is a variable-length RISC instruction set derived from the original Motorola 68000 family, optimized for embedded systems that require deterministic performance, low power, and a rich peripheral set. Within the broader taxonomy, the MCF5307FT90B is a microprocessor (MCU) -> 32-bit MCU -> ColdFire family -> power-management-aware embedded controller. Key features include a 90 MHz ColdFire V3 core delivering approximately 70 MIPS, integrated 10/100 Ethernet MAC, USB 1.1 device and host, four 32-bit timers, dual UARTs, I2C, QSPI, and a glueless external memory controller supporting DRAM, SRAM, and flash. The 208-FQFP package provides 130+ GPIO and dedicated peripheral interfaces, enabling high-pin-count applications without external bus expander logic. The architecture integrates a Harvard-style bus with separate instruction and data paths, a hardware multiply/accumulate unit, and a debug module supporting BDM (Background Debug Mode) for real-time in-circuit emulation. This combination of deterministic interrupt latency and high-throughput peripherals makes the part well suited to control planes in networking and industrial automation. Typical applications include industrial control, networking gateways, point-of-sale terminals, factory automation, and embedded HMI panels. The on-chip EMAC and USB simplify connected-device designs by removing external PHY bridge components in low-cost systems. When designing with the MCF5307FT90B, ensure the 3.3V core and I/O supply sequencing matches the external SDRAM requirements and that JTAG/BDM debug access is routed to a header for production diagnostics. Decoupling capacitors should be placed within 5 mm of each supply pin pair. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Lifecycle status, package dimensions, and stock availability are sourced from real-time distributor data as of 2026-10-18.

询价 联系我们
MCF5327CVM240J - ColdFire V3 240MHz MPU 196-LBGA | NXP
MCF5327CVM240J

MCF5327CVM240J - ColdFire V3 240MHz MPU 196-LBGA | NXP

The NXP (formerly Freescale) MCF5327CVM240J is a ColdFire V3 family 32-bit microprocessor running at 240 MHz, housed in a 196-ball LBGA (MAPBGA) 15x15 mm package with integrated LCD controller. The MCF532x family targets human-machine interface (HMI) and industrial control applications, combining a variable-length RISC core with rich connectivity and security integration. Key features include 32 KB internal SRAM, 94 user I/O lines, ROMless external memory interface, JTAG/BDM debug, and an integrated TFT/LCD controller. The ColdFire V3 core delivers 211 MIPS at 240 MHz while maintaining code compatibility with the wider ColdFire ecosystem, easing migration from older V2 designs. The architecture pairs the V3 core with a 32-bit system bus, dedicated DMA channels, and a peripheral set that includes Ethernet MAC, USB 2.0 Full-Speed OTG, CAN, SPI, I2C, UARTs, and a 16-bit external memory controller supporting SDRAM, SRAM, and NOR flash. The integrated LCD controller supports TFT panels up to 800x600, eliminating the need for an external graphics controller in many HMI designs. Typical applications include industrial HMI panels, factory automation controllers, point-of-sale terminals, medical instrument displays, building automation touch panels, and embedded operator interfaces. The combination of Ethernet, USB, CAN, and LCD in one package reduces BOM cost and PCB area. Designers should verify that the LBGA 15x15 mm land pattern is acceptable for their manufacturing process (X-ray or AOI inspection is recommended for BGA rework) and that thermal vias under the package are adequate for the application power profile. This page consolidates distributor pricing, drop-in alternatives, and design guidance not found in the manufacturer datasheet, enabling faster part selection and lifecycle planning.

询价 联系我们
MCF53281CVM240 - ColdFire V3 MPU, 240MHz, 256-MAPBGA | NXP
MCF53281CVM240

MCF53281CVM240 - ColdFire V3 MPU, 240MHz, 256-MAPBGA | NXP

The NXP MCF53281CVM240 is a ColdFire V3 MCF532x family 32-bit microprocessor running at 240 MHz, with no on-chip program memory (ROMless) and housed in a 256-pin MAPBGA (17x17 mm) package. The MCF532x family integrates the first LCD controller on a ColdFire device, addressing HMI and industrial control while keeping a rich connectivity and security feature set. A ColdFire microprocessor is a 32-bit variable-length RISC processor core derived from the original Motorola 68000 architecture. ColdFire V3 devices target embedded applications requiring deterministic performance with low power. The MCF532x sits within the NXP ColdFire MPU taxonomy: ColdFire -> 32-bit embedded MPU -> microprocessor -> integrated circuit. This category hierarchy helps engineers and AI knowledge graphs reason about fit-for-purpose when comparing against ARM Cortex-M or other 32-bit MCU/MPU families. Key features include the Version 3 ColdFire variable-length RISC core, system debug via JTAG (IEEE 1149.1) for board-level test, an integrated LCD controller for direct TFT/STN panel drive, Ethernet MAC, USB On-The-Go, CAN, and security peripherals. The 240 MHz core delivers sufficient throughput for graphical HMI rendering and real-time industrial control loops on a single chip, reducing bill-of-materials relative to discrete controller-plus-MCU designs. The MCF532x family shares a common peripheral set across package-compatible variants. The ROMless design requires external program memory (typically SDRAM or NOR flash) connected through the external bus interface, giving system designers freedom to size memory to use case rather than committing to a fixed on-chip flash density. The 256-MAPBGA (17x17 mm) package supports the wide external memory bus plus rich peripheral pinout. Typical applications include industrial HMI panels, building automation controllers, point-of-sale terminals, factory-automation HMIs, and networked control gateways that benefit from integrated LCD, Ethernet, and USB-OTG. The part is also used in medical patient-interface displays and security/alarm panels requiring on-board graphical capability. When designing with this MPU, confirm external SDRAM timing and trace length against the MCF53281 datasheet, and verify PCB layer stackup supports the 256-ball BGA escape. Designers should also plan JTAG header placement early for bring-up and production test. This page synthesizes distributor pricing, drop-in MCF532x family alternatives, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
MCF53281CVM240J - 32-bit ColdFire V3 MCU, 240MHz, 256-MAPBGA | NXP
MCF53281CVM240J

MCF53281CVM240J - 32-bit ColdFire V3 MCU, 240MHz, 256-MAPBGA | NXP

The NXP (formerly Freescale) MCF53281CVM240J is a 32-bit ColdFire V3 MCF532x microprocessor running at 240 MHz with no on-chip program ROM (ROMless variant), housed in a 256-ball MAPBGA package (17x17 mm body). It integrates the ColdFire Variable-Length RISC (VLRISC) Version 3 core, a 32 KB on-chip SRAM, a rich set of peripherals, and the eMAC/FEC Ethernet block targeting connected and industrial control applications. A ColdFire microprocessor is a family of 32-bit RISC cores derived from the Motorola 68000 architecture, optimized for embedded systems requiring deterministic performance at low power. Positioned in the NXP product hierarchy, MCF53281 sits within the MCF532x sub-family of ColdFire V3 microprocessors, above the MCF521x and below the MCF537x/547x families, and is broadly classed as a microcontroller (MCU)/microprocessor unit (MPU) in the semiconductor taxonomy. Key features include the 240 MHz ColdFire V3 core delivering up to 211 MIPS, integrated 10/100 Ethernet MAC (FEC), USB 2.0 Full-Speed OTG, CAN 2.0A/B, three UARTs, two I2C ports, two QSPI channels, eMIOS timer, four 32-bit DMA channels, 16-channel analog-to-digital converter, JTAG/BDM debug, and 94 GPIO lines. The 32 KB SRAM is complemented by external memory controllers supporting SDRAM, SRAM, NOR flash, and NAND flash devices. From an architectural standpoint, the ColdFire V3 core pairs a Harvard-style instruction/data split with a unified internal bus and 16 KB instruction cache. The device operates from a single 3.3 V supply for I/O with separate 1.5 V internal core supply, and exposes a comprehensive interrupt controller plus edge-port and GPIO subsystem. Hardware multiply/accumulate (MAC) and divider units accelerate DSP-style math. Typical applications include industrial automation controllers, point-of-sale terminals, building automation gateways, factory-floor networked sensors, medical instrumentation, and any embedded system needing on-chip Ethernet with deterministic real-time behavior. Designers choose MCF53281 for its balanced connectivity and modest power footprint versus higher-end ColdFire or PowerPC parts. When designing with the part, allocate 1 square inch of copper under the MAPBGA thermal pad and use four-layer FR4 minimum to handle the 256-ball routing. Place 0.1 uF + 10 uF decoupling pairs within 5 mm of every supply ball. External SDRAM traces must be length-matched within 25 mils across byte groups. This page synthesizes distributor pricing, parametric drop-in alternatives from within the MCF532x family, and practical PCB/decoupling guidance not found in the manufacturer datasheet alone, giving an engineer a single stop for sourcing and design validation.

询价 联系我们
MCF5328CVM240 - ColdFire V3 240MHz MPU, 256-MAPBGA | NXP
MCF5328CVM240

MCF5328CVM240 - ColdFire V3 240MHz MPU, 256-MAPBGA | NXP

The NXP Semiconductors MCF5328CVM240 is a 32-bit ColdFire V3 microprocessor running at 240 MHz, packaged in a 256-ball MAPBGA (17x17 mm) and supplied as a ROMless device. It integrates an integrated LCD controller (the first on a ColdFire device), 32 KB of SRAM, 94 user I/O lines, and a rich connectivity/security peripheral set, making it a system-on-chip for human-machine interface (HMI) and industrial control. Its part status is NRND (Not Recommended for New Designs). A microprocessor (MPU) is an integrated circuit that contains the central processing unit, on-chip memory, and peripheral interfaces required to execute software and orchestrate external hardware. Within the broader taxonomy, the MCF5328CVM240 belongs to the ColdFire V3 (Version 3) family, a variable-length RISC architecture derived from the original 68k lineage and positioned between traditional 8/16-bit microcontrollers and higher-end PowerPC/MPC processors. ColdFire V3 cores are commonly used in embedded industrial and graphical HMI applications where deterministic control and connectivity outweigh the need for a full application processor. Key features include a 240 MHz ColdFire V3 core with on-chip SRAM, an integrated LCD controller for direct panel driving, JTAG/BDM for system debug, an external oscillator interface, and an extended industrial operating temperature range of -40C to +85C. The ROMless configuration requires external boot memory (typically NOR flash) connected through the external bus interface, giving designers freedom to size non-volatile storage to the application. Architecturally, the MCF5328CVM240 implements the ColdFire V3 ISA with an enhanced multiply-accumulate (EMAC) unit for DSP-style signal processing and dedicated peripheral engines for connectivity (including Ethernet MAC, USB, and CAN options within the family). The 256-MAPBGA package provides ample pin count for the external memory bus and parallel peripheral interfaces, while keeping the PCB footprint modest at 17x17 mm. Typical applications include industrial HMI panels with integrated TFT LCDs, factory automation controllers, building-automation gateways, security/access-control panels, and point-of-sale terminals. The integrated LCD controller reduces BOM cost by eliminating an external graphics controller, while the ColdFire V3 core provides the throughput needed for graphical menu rendering. When designing with this part, note that the ROMless variant requires external boot flash and a well-defined reset/boot-mode configuration. Decoupling must follow the BGA pin-map recommendations in the manufacturer datasheet, and the NRND status should trigger an active migration plan to a newer NXP part for new designs. This page synthesizes distributor stock data, parametric drop-in alternatives, and PCB-aware design notes not typically aggregated in a single manufacturer datasheet view.

询价 联系我们
MCF5329CVM240 - ColdFire V3 MPU, 240MHz, 256-LBGA | NXP
MCF5329CVM240

MCF5329CVM240 - ColdFire V3 MPU, 240MHz, 256-LBGA | NXP

The NXP Semiconductors MCF5329CVM240 is a 32-bit ColdFire V3 microprocessor that integrates the first LCD controller on a ColdFire device, running at 240 MHz with 256 KB of on-chip SRAM, in a 256-ball LBGA (MAPBGA) package. According to the NXP MCF532x datasheet, it targets human-machine interface (HMI) and industrial control applications while maintaining rich connectivity and security integration. The integrated LCD controller supports TFT and STN panels directly, eliminating the need for an external graphics controller in many designs. Key features include the ColdFire Variable-Length RISC (VLRISC) V3 core with a 16-Kbyte unified write-back cache, 32 KB of SRAM, 94 general-purpose I/O lines, an external memory controller for SDRAM, SRAM, and NOR/NAND flash, plus a 10/100 Ethernet MAC and USB 2.0 full-speed OTG controller. The device also integrates a DDR/LCD controller, DMA channels, timers, UARTs, I2C, SPI, and an enhanced JTAG debug interface (BDM/OnCE). A ColdFire V3 microprocessor is a 32-bit RISC-style processor core optimized for embedded control with code-density advantages over fixed-length architectures. ColdFire sits in the embedded microprocessor hierarchy between 8/16-bit MCUs and high-end application processors, providing deterministic real-time performance with a rich peripheral set and external memory bus for systems that exceed internal memory limits. The MCF532x family extends this with integrated graphics, making it a single-chip solution for HMI panels. Typical applications include industrial operator-interface panels, point-of-sale (POS) terminals, medical patient monitors, building-automation touch panels, and portable instrumentation with TFT displays. The combination of Ethernet, USB OTG, CAN, and the LCD controller allows a single device to drive the full HMI plus connectivity stack. When designing with the MCF5329CVM240, ensure the PCB land pattern matches the 256-LBGA (MAPBGA) 17x17 mm footprint and that JTAG/BDM lines are length-matched for reliable boundary-scan debugging. As an NRND (Not Recommended for New Designs) part, evaluate the pin-compatible MCF53281CVM240 family for new product introductions while keeping MCF5329CVM240 as the baseline for legacy systems. This page synthesizes NXP manufacturer data, distributor pricing, NRND-aware drop-in alternatives within the same 256-LBGA footprint, and practical design notes for engineers maintaining existing HMI designs or planning a migration path.

询价 联系我们
MCF5329CVM240J - 240MHz ColdFire V3 MPU 32-Bit ROMless 256-MAPBGA | NXP
MCF5329CVM240J

MCF5329CVM240J - 240MHz ColdFire V3 MPU 32-Bit ROMless 256-MAPBGA | NXP

The NXP Semiconductors MCF5329CVM240J is a ColdFire V3 (Version 3) 32-bit microprocessor unit (MPU) running at 240 MHz, housed in a 256-ball MAPBGA package measuring 17 mm × 17 mm. It is part of the MCF532x family and is supplied in a ROMless configuration, meaning external flash memory is required for application code storage. The device integrates a variable-length RISC ColdFire core with enhanced JTAG debug support, system-level debug hooks, and on-chip peripherals suited for connected embedded systems. An MPU (microprocessor unit) is a CPU-centric integrated circuit that relies on external memory for both program and data storage, in contrast to a microcontroller (MCU) which integrates flash and SRAM on-chip. The ColdFire V3 architecture is a 32-bit variable-length RISC ISA derived from the original m68k family, optimized for embedded systems that require deterministic performance, low power, and high code density. MPUs like the MCF5329CVM240J typically sit above MCUs in the embedded hierarchy (MPU -> microcontroller -> embedded processor -> semiconductor IC), targeting applications that need external memory expansion, large address spaces, or high-throughput peripherals such as Ethernet and USB. Key features of the MCF5329CVM240J include a 240 MHz ColdFire V3 core with EMAC (enhanced multiply-accumulate) for DSP-style operations, integrated Fast Ethernet MAC, USB On-The-Go (OTG) controller, 32 KB SRAM, eSDHC (enhanced Secure Digital Host Controller), FlexCAN, and multiple serial interfaces (UART, SPI, I2C). It supports DDR SDRAM, NAND flash, and SRAM external memories through its system bus, with flexible chip-select configuration for glueless memory expansion. The architecture combines a Harvard-style internal bus with a unified external bus, and it is supported by NXP's CodeWarrior and Eclipse-based development tools. The 256-MAPBGA package with 1 mm pitch enables dense PCB designs suitable for industrial control, point-of-sale terminals, and connected appliances requiring Ethernet plus USB connectivity in a single chip. Typical applications include industrial automation controllers, networked point-of-sale (POS) terminals, factory-floor Ethernet gateways, and consumer connected appliances such as smart-home hubs and networked printers. The ROMless design allows OEMs to select their preferred external flash density and supplier. When designing with the MCF5329CVM240J, ensure proper power-rail decoupling with 100 nF ceramic capacitors placed close to each supply ball, and follow NXP's reference PCB layout for the 17 mm × 17 mm MAPBGA to avoid signal-integrity issues on the DDR memory bus. The JTAG signals require a 4-wire TAP plus optional reset for boundary-scan debugging. This page synthesizes current distributor pricing, drop-in same-package alternatives (including JAK Electronics comparison data), and practical PCB-layout guidance not assembled in a single location by the manufacturer datasheet.

询价 联系我们
MCF53721CVM240 - ColdFire V3 32-Bit MPU 240MHz | NXP
MCF53721CVM240

MCF53721CVM240 - ColdFire V3 32-Bit MPU 240MHz | NXP

The NXP Semiconductors MCF53721CVM240 is a ColdFire V3 MCF537x microprocessor that delivers 32-bit RISC processing at 240 MHz, housed in a 196-ball LBGA (15x15 mm) ROMless package. What is a ColdFire microprocessor? ColdFire is a 68k-architecture derivative microprocessor family designed by Freescale/NXP that brings 32-bit processing to cost- and power-sensitive embedded applications. It sits within the MPU (microprocessor) hierarchy, above 8/16-bit microcontrollers, and provides higher clock speeds and richer peripheral integration. The MCF537x family specifically adds on-chip Ethernet, USB, and hardware encryption, targeting industrial control networks and secure communication endpoints. The MCF53721CVM240 features 32 KB of unified SRAM, 62 programmable I/O lines, an external oscillator interface, and an integrated ColdFire V3 core capable of 211 Dhrystone 2.1 MIPS. Its advanced integration reduces BOM by consolidating communications peripherals, timers, and DMA into one device for connected industrial systems. The ColdFire V3 core uses a Variable-Length RISC architecture with 16- and 32-bit instruction mixes, a hardware multiply/accumulate unit, and a configurable Memory Management Unit (MMU) on select derivatives. At 240 MHz the device consumes well under 1 W typical, an order of magnitude lower than comparable PowerPC parts, enabling fanless industrial designs. Typical applications include industrial Ethernet gateways, secured building-automation controllers, and networked sensor hubs. The MCF53721CVM240 is also used in HVAC controllers, substation automation, and point-of-sale terminals where deterministic real-time response and hardware-accelerated cryptography simplify the firmware. Designers should evaluate the absence of internal Flash when selecting boot configuration: external boot ROM or Flash is required, and the boot mode is sample-strapped via the configuration pins. Plan PCB layout with 4-layer minimum and matched-length Ethernet traces to meet signal integrity at 100 Mbps. This page compiles distributor pricing, drop-in same-package alternatives from the MCF537x family, and application-specific design guidance not centralized in the manufacturer datasheet.

询价 联系我们
MCF5372LCVM240 - ColdFire V3 240MHz MPU, 196-LBGA | NXP
MCF5372LCVM240

MCF5372LCVM240 - ColdFire V3 240MHz MPU, 196-LBGA | NXP

The NXP Semiconductors MCF5372LCVM240 is a 32-bit ColdFire V3 microprocessor built on the MCF537x family, delivering a 240 MHz core clock, ROMless boot from external memory, and 32 KB on-chip SRAM in a 196-ball LBGA (15x15 mm) package. It integrates Ethernet MAC, USB, CAN, and UART peripherals aimed at industrial networking and process-control embedded systems. A microprocessor (MPU) is a CPU-centric system-on-chip that requires external program memory and external RAM. Within the embedded hierarchy, the MCF5372 sits above microcontrollers: it executes code directly from external flash or ROM, scales to larger memory maps than typical MCUs, and runs an MMU-less V4 architecture tuned for deterministic real-time response. ColdFire is NXP's legacy 68k-compatible ISA, and the V3 core adds enhanced integer pipelines and improved interrupt handling versus older V2 cores such as the MCF5329. Key differentiating features include 32 KB on-chip SRAM, hardware cryptography acceleration on selected family members, dual 10/100 Ethernet MACs, USB 2.0 full-speed OTG, two CAN 2.0B controllers, four UARTs, and an eMAC for fast Ethernet switching. The 196-LBGA package exposes 62 user I/O pins plus dedicated address/data bus lines, and operates from a 1.4 V to 1.6 V core supply with 3.3 V I/O tolerance. Industrial temperature grade (-40 C to +85 C) supports deployment in factory-floor and outdoor enclosures. Typical applications include industrial control PLCs, factory automation gateways, point-of-sale terminals, networked sensor hubs, and HVAC building-automation controllers. The combination of deterministic ColdFire pipeline, dual Ethernet, and CAN is well-matched to industrial EtherNet/IP and DeviceNet slave designs. When designing in this part, allocate a four-layer PCB with a solid ground plane under the LBGA. Use 1 oz copper and controlled-impedance routing for the external memory bus. Note that this part is in NRND (Not Recommended for New Designs) lifecycle status - NXP has flagged it for eventual EOL. Plan a migration path to an active ColdFire or Kinetis successor for new product introductions. This page synthesizes distributor pricing across DigiKey, Mouser, and Octopart, an alternatives list compiled from same-package NXP ColdFire variants and cross-reference data, and practical design notes not consolidated in any single manufacturer document.

询价 联系我们
MCF5372LCVM240J - ColdFire V3 240MHz 32-Bit MPU | NXP | 196-LBGA
MCF5372LCVM240J

MCF5372LCVM240J - ColdFire V3 240MHz 32-Bit MPU | NXP | 196-LBGA

The NXP MCF5372LCVM240J is a ColdFire V3 MCF537x family 32-bit microprocessor (MPU) running at up to 240 MHz core frequency, supplied in a 196-pin LBGA (15x15 mm, MAP-BGA) package. The device is ROMless and integrates peripherals targeted at industrial control, human-machine interface (HMI), and connectivity gateway designs. A microprocessor (MPU) is a CPU chip without on-chip Flash memory; the system stores code in external NOR/NAND Flash or SDRAM. The ColdFire V3 core is a variable-length RISC architecture derived from the original Motorola 68k family, optimized for embedded control with deterministic interrupt response and a compact code footprint. MCF537x parts sit in the NXP ColdFire hierarchy as: ColdFire V3 -> MCF537x family -> 32-bit microprocessor -> embedded MPU -> semiconductor. Key specifications include a 240 MHz core clock, ROMless architecture requiring external boot memory, a 196-pin LBGA package, and an integrated peripheral set typical of the MCF5372 family (Ethernet MAC, USB, UARTs, timers, and external memory bus). The 'J' suffix designates industrial temperature grade (-40C to +85C). The LBGA-196 footprint provides generous thermal dissipation and high I/O density, suited to multilayer PCBs. Typical applications include industrial automation controllers, HMI panels, building automation gateways, point-of-sale terminals, and networked sensor hubs. The combination of ColdFire determinism, integrated Ethernet, and ROMless expandability supports long-lifecycle embedded platforms. Designers should plan an external boot Flash and SDRAM interface with proper bus-termination and decoupling. Verify firmware boot mode selection resistors before PCB fabrication. For thermal management, the LBGA's exposed die and large copper area on inner PCB layers provide adequate heat spreading at typical industrial workloads. This page synthesizes distributor availability, lifecycle (NRND) status, parametric cross-reference data, and practical design considerations not collated on individual datasheet sites.

询价 联系我们
MCF5407AI162 - ColdFire V4 162MHz MPU 208-FQFP | NXP
MCF5407AI162

MCF5407AI162 - ColdFire V4 162MHz MPU 208-FQFP | NXP

The NXP MCF5407AI162 is a 32-bit ColdFire V4 microprocessor delivering up to 162 MHz core clock, with a ROMless architecture and 4 KB of internal SRAM, housed in a 208-pin FQFP (28x28 mm) package. It is the original member of the MCF540x family, the first standard microprocessor to implement the ColdFire V4 core and offers up to 316 MIPS (Dhrystone 2.1) of integer performance at full clock. The variable-length RISC technology combined with an enhanced ColdFire instruction set gives designers a high-performance control-plane processor with a slower, easier-to-route external system bus interface. A microprocessor (MPU) is a single-chip CPU that integrates the integer core, cache, bus controllers and peripheral bridges into one device, requiring external program memory (ROM/RAM) and I/O. ColdFire V4 sits in the Freescale/NXP MPU hierarchy between the ColdFire V2/V3 controllers and the higher-end PowerPC cores, offering RISC-like code density with deterministic interrupt latency. The MCF5407AI162 was specifically designed to ease migration for systems previously built around 68k/ColdFire parts that needed more headroom without moving to PowerPC toolchains. Key features include a 162 MHz internal core clock (selectable via clock divider relative to the system bus), 4 KB unified instruction/data SRAM, dual on-chip UARTs, a 10/100 Ethernet MAC, DMA, timers, and a 32-bit system bus with programmable Chip Select / SDRAM controllers. The integrated FPU is optional via the MCF5407 (no FPU) variant; the AI162 suffix designates the 162 MHz speed grade in the industrial -40C to +85C range. ROMless boot allows external Flash to host the firmware image and supports secure boot through external encryption devices. Typical applications include industrial control PLCs, networked embedded gateways, point-of-sale terminals, factory automation controllers, and any 68k-ColdFire legacy migration that needs more compute than the V2/V3 families. The Ethernet MAC and UARTs make it a fit for serial- or IP-connected supervisory controllers. The wide peripheral set (DMA, timers, CS, SDRAM) keeps the external glue logic low. When designing with this part, carefully observe the SDRAM controller timing parameters and provide adequate decoupling on the 3.3V core/IO rails. Boot mode strapping must be valid at reset for the chosen Flash address; consult the ColdFire MCF5407 reference manual for chip-select timing and SDRAM configuration registers.

询价 联系我们