微控制器

产品（18735)

ATSAM3S2AA-MUR - Cortex-M3 MCU 64MHz 128KB Flash | Microchip
ATSAM3S2AA-MUR

ATSAM3S2AA-MUR - Cortex-M3 MCU 64MHz 128KB Flash | Microchip

The Microchip Technology ATSAM3S2AA-MUR is a 32-bit ARM Cortex-M3 microcontroller from the SAM3S series, running at 64 MHz with 128KB (128K x 8) of embedded Flash memory, housed in a 48-pin VFQFN (7x7 mm) exposed-pad package and operating from a 1.62V to 3.6V supply. A microcontroller (MCU) is a single-chip embedded processor that integrates a CPU core, program memory, data memory, and peripherals such as timers, serial interfaces, and analog functions. Within the embedded systems hierarchy, the SAM3S sits in the medium-range general-purpose class of 32-bit MCUs, positioned above 8-bit devices like the PIC16 family and below high-performance Cortex-M4/M7 parts. The ARM Cortex-M3 architecture provides deterministic interrupt handling via the Nested Vectored Interrupt Controller (NVIC) and efficient Thumb-2 instruction execution. Key features include 64 MHz core performance, 128KB of on-chip Flash for program storage, low-power operation across the industrial temperature range, and a peripheral set that Microchip describes as offering the best ratio of reduced power consumption, processing power, and peripherals in its class. The PIOs support a parallel data capture mode that collects data from non-standard sources such as low-cost image sensors, with DMA transfers offloading the CPU. The device integrates a Cortex-M3 core with configurable Flash and SRAM organization, and Microchip notes Flash is architected in dual banks on SAM3S family members, supporting ECC and flash-banking techniques. The exposed-pad QFN package provides low inductance power delivery and good thermal performance for compact industrial designs. Typical applications include industrial control panels, consumer appliances, metering systems, and sensor-hub designs that benefit from the parallel capture interface and DMA-driven data flow. When designing, ensure the 1.62V to 3.6V supply range is respected and decouple the VDDCORE and VDDIO domains per the manufacturer datasheet; the M suffix denotes tape-and-reel packaging for automated assembly. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

询价 联系我们
ATSAM3S2BA-AU - 64MHz Cortex-M3 MCU 128KB Flash | Microchip
ATSAM3S2BA-AU

ATSAM3S2BA-AU - 64MHz Cortex-M3 MCU 128KB Flash | Microchip

The Microchip Technology ATSAM3S2BA-AU is a 32-bit ARM Cortex-M3 flash microcontroller running at up to 64 MHz with 128 KB embedded Flash and 32 KB SRAM, housed in a 64-pin LQFP (10x10 mm) surface-mount package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, forming the lowest layer of the embedded-system hierarchy above discrete logic and below application processors and systems-on-chip. The SAM3S family belongs to Microchip's SMART ARM-based MCU portfolio, targeting cost-sensitive 32-bit industrial and consumer designs. Key features of the ATSAM3S2BA-AU include the ARM Cortex-M3 revision 2.0 core with Thumb-2 instruction set and Memory Protection Unit (MPU), a 128-bit-wide Flash memory interface with an accelerator for efficient 64 MHz execution, and pin-to-pin compatibility with the earlier AT91SAM7S series in 48- and 64-pin versions, which simplifies migration of legacy designs. Technical depth: the device integrates typical SAM3S peripherals such as USARTs, SPI, TWI (I2C), PWM channels, an ADC, USB 2.0 full-speed device port, and a flexible clock tree with fast RC oscillators and crystal inputs. The suffix 'AU' identifies the 64-pin LQFP, industrial temperature range, and lead-free tray packaging, making the part suited to standard reflow assembly. Typical applications include industrial control panels, battery-charged portable instruments, consumer appliances, motor-control front ends, and USB-connected sensor interfaces, where 128 KB of Flash and rich connectivity cover mid-complexity firmware without external memory. Design consideration: verify supply-voltage decoupling on VDDCORE and VDDIO domains and confirm Flash capacity against growth headroom, since larger SAM3S variants such as the ATSAM3S4BA share the same footprint for upward migration. This page synthesizes distributor pricing, drop-in alternatives, comparison data, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
ATSAM3S2BA-AUR - Cortex-M3 MCU 64MHz 128KB Flash | Microchip
ATSAM3S2BA-AUR

ATSAM3S2BA-AUR - Cortex-M3 MCU 64MHz 128KB Flash | Microchip

The Microchip Technology ATSAM3S2BA-AUR is a 32-bit ARM Cortex-M3 flash microcontroller running at up to 64 MHz, with 128 KB of flash memory, 32 KB of SRAM, and a wide 1.62V to 3.6V operating supply, housed in a 64-pin LQFP (10x10 mm) surface-mount package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, non-volatile program memory, volatile data memory, and a rich set of peripherals on one die. Within the semiconductor hierarchy, the ATSAM3S2BA-AUR belongs to the Microchip (formerly Atmel) SAM3S family of ARM Cortex-M3 microcontrollers, which sit above simpler 8-bit MCUs in processing capability while retaining low-power operation for embedded control systems. Key features include the 64 MHz Cortex-M3 core with a 3-stage pipeline and Thumb-2 instruction set, 128 KB of on-chip flash for code storage, fast SRAM, and an extended industrial temperature rating. The peripheral set typical of the SAM3S series includes UART/USART serial ports, SPI, TWI (I2C), an ADC, PWM channels, and USB connectivity, enabling single-chip designs for communication-heavy applications. The device operates from a single 1.62V to 3.6V rail, supporting battery-powered designs. Architecturally, the ARM Cortex-M3 core integrates a Nested Vectored Interrupt Controller (NVIC) for deterministic low-latency interrupt handling and hardware divide support. Flash-based program memory with in-system programming allows firmware field updates, while the 10x10 mm LQFP-64 package provides sufficient I/O count for display, sensor, and actuator interfaces. Typical applications include industrial control and automation nodes, consumer appliances, battery-powered portable instruments, and USB-enabled embedded devices where a 32-bit core with ample flash is required without the cost of higher-memory parts. A key design consideration is supply decoupling: place low-ESR ceramic capacitors close to each VDD/VDDIO pin pair, and confirm 1.8V/3.3V domain separation per the SAM3S datasheet electrical characteristics before PCB routing. This page synthesizes distributor pricing, drop-in same-family alternatives, cross-reference candidates, and practical design notes not consolidated in the manufacturer datasheet.

询价 联系我们
ATSAM3S2BA-MU - 64MHz Cortex-M3 MCU 128KB Flash | Microchip (Tape & Reel)
ATSAM3S2BA-MU

ATSAM3S2BA-MU - 64MHz Cortex-M3 MCU 128KB Flash | Microchip (Tape & Reel)

The Microchip Technology ATSAM3S2BA-MU is a 32-bit ARM Cortex-M3 microcontroller from the SAM3S family, running at up to 64 MHz with 128 KB of embedded Flash and 32 KB of SRAM, housed in a 64-pin QFN (9x9 mm) package with exposed pad. A microcontroller (MCU) is a single-chip integrated circuit that combines a processor core, program memory, data memory, and a rich set of peripherals into one package. Within the embedded-systems hierarchy, the SAM3S sits in the mid-range 32-bit MCU class, positioned above 8-bit PIC and AVR devices and below high-performance Cortex-M4/M7 families, targeting cost-sensitive applications that still require 32-bit compute throughput and USB connectivity. Key features include the 64 MHz Cortex-M3 core with a 3-stage pipeline and Thumb-2 instruction set, 128 KB of self-programmable Flash with a dedicated flash controller, and an integrated USB 2.0 Full-Speed Device port. The device also integrates a 12-bit ADC with 16 channels, a 2-channel 12-bit DAC, a capacitive-touch support peripheral, PWM channels, USART/SPI/TWI serial interfaces, and an internal 1.8V/3.3V operating regime supplied from 1.62V to 3.6V. Technically, the SAM3S implements Microchip (Atmel) SMART ARM-based architecture with a multi-layer bus matrix, DMA-capable peripheral event system, and power management controller offering sleep, wait, and backup modes with low quiescent consumption for battery-powered designs. The exposed-pad QFN package improves thermal dissipation and ground return paths for mixed-signal performance. Typical applications include industrial control panels, consumer appliances, USB-connected sensors and dataloggers, and battery-powered metering products where the combination of Cortex-M3 performance, USB device connectivity, and integrated analog reduces total bill-of-materials cost. For design, plan the VDDCORE/VDDIO decoupling network per the manufacturer datasheet and use the exposed pad as the main ground connection; flash wait-state configuration relative to the 64 MHz clock also affects efficiency. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

询价 联系我们
ATSAM3S2BA-MUR - 64MHz Cortex-M3 MCU 128KB Flash | Microchip
ATSAM3S2BA-MUR

ATSAM3S2BA-MUR - 64MHz Cortex-M3 MCU 128KB Flash | Microchip

The Microchip Technology ATSAM3S2BA-MUR is a 32-bit ARM Cortex-M3 microcontroller from the SAM3S family, running at up to 64 MHz with 128 KB of embedded Flash and 32 KB of SRAM, housed in a 64-pin QFN (9x9 mm) package with exposed pad. A microcontroller (MCU) is a single-chip integrated circuit that combines a processor core, program memory, data memory, and a rich set of peripherals into one package. Within the embedded-systems hierarchy, the SAM3S sits in the mid-range 32-bit MCU class, positioned above 8-bit PIC and AVR devices and below high-performance Cortex-M4/M7 families, targeting cost-sensitive applications that still require 32-bit compute throughput and USB connectivity. Key features include the 64 MHz Cortex-M3 core with a 3-stage pipeline and Thumb-2 instruction set, 128 KB of self-programmable Flash with a dedicated flash controller, and an integrated USB 2.0 Full-Speed Device port. The device also integrates a 12-bit ADC with 16 channels, a 2-channel 12-bit DAC, a capacitive-touch support peripheral, PWM channels, USART/SPI/TWI serial interfaces, and an internal 1.8V/3.3V operating regime supplied from 1.62V to 3.6V. Technically, the SAM3S implements Microchip (Atmel) SMART ARM-based architecture with a multi-layer bus matrix, DMA-capable peripheral event system, and power management controller offering sleep, wait, and backup modes with low quiescent consumption for battery-powered designs. The exposed-pad QFN package improves thermal dissipation and ground return paths for mixed-signal performance. Typical applications include industrial control panels, consumer appliances, USB-connected sensors and dataloggers, and battery-powered metering products where the combination of Cortex-M3 performance, USB device connectivity, and integrated analog reduces total bill-of-materials cost. For design, plan the VDDCORE/VDDIO decoupling network per the manufacturer datasheet and use the exposed pad as the main ground connection; flash wait-state configuration relative to the 64 MHz clock also affects efficiency. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

询价 联系我们
ATSAM3S2CA-AU - 64MHz Cortex-M3 MCU 128KB Flash | Microchip
ATSAM3S2CA-AU

ATSAM3S2CA-AU - 64MHz Cortex-M3 MCU 128KB Flash | Microchip

The Microchip Technology ATSAM3S2CA-AU is a 32-bit ARM Cortex-M3 flash microcontroller running at up to 64 MHz, with 128 KB of embedded Flash memory and 32 KB of SRAM, housed in a 100-pin LQFP (14x14 mm) package. Formerly an Atmel AT91 SAM3S series device, it integrates an MPU, a Thumb-2 instruction set pipeline, and a rich peripheral set for embedded control. A 32-bit microcontroller (MCU) is an integrated circuit that executes application code and controls peripherals on a single chip; the Cortex-M3 core sits within the ARM MCU hierarchy beneath higher-performance Cortex-M4/M7 parts and above 8-bit architectures. The SAM3S family targets cost-sensitive, low-power embedded systems that still need 32-bit processing headroom. Key features include the ARM Cortex-M3 revision 2.0 core at 64 MHz with Memory Protection Unit (MPU), 128 KB single-cycle Flash and 32 KB SRAM, 47 general-purpose I/O lines on this 100-pin variant, and Flash-based program storage with in-system programming. The MRL/industrial temperature grade supports -40C to +85C operation per distributor data. The architecture combines the three-stage Harvard Cortex-M3 pipeline with an on-chip bus matrix, allowing Flash execution while peripherals such as UARTs, timers, and USB operate concurrently. Nested Vectored Interrupt Controller (NVIC) latency is deterministic, which suits real-time embedded automation and metering firmware. Core supply operates in the 1.08 V to 1.32 V domain with an integrated regulator from a 1.8 V/3.3 V IO supply. Typical applications include industrial control, IoT sensor nodes, motor control, metering, and low-power board designs, where the SAM3S balances cost, power, and processing throughput. Pin-to-pin compatibility with AT91SAM7S legacy parts (48- and 64-pin versions per datasheet notes) eases migration. When designing with this device, budget Flash carefully: 128 KB is adequate for most control firmware but tight for stacks with USB host plus file systems; consider ATSAM3S4CA (256 KB) if code size may grow. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
ATSAM3S2CA-AUR - 64MHz Cortex-M3 MCU 128KB Flash | Microchip
ATSAM3S2CA-AUR

ATSAM3S2CA-AUR - 64MHz Cortex-M3 MCU 128KB Flash | Microchip

The Microchip Technology ATSAM3S2CA-AUR is a 32-bit ARM Cortex-M3 microcontroller of the SAM3S series, running at up to 64 MHz with 128 KB of flash memory and a 100-pin LQFP (14x14 mm) surface-mount package. It operates from a 1.62V to 3.6V supply (1.8V/3.3V typical rails). A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory (flash), data memory (SRAM), and a rich set of peripherals such as timers, serial interfaces (USART, SPI, I2C/TWI), ADC channels, and general-purpose I/O. Within the semiconductor hierarchy, the ATSAM3S2CA-AUR belongs to the SAM3S family, the ARM Cortex-M3 core class, the 32-bit microcontroller category, and the broader embedded processor / power management system domain of a board design. Key differentiating features include the Thumb-2 instruction set of the Cortex-M3 core, which delivers high code density; 128 KB (128K x 8) of on-chip flash for program storage; fast SRAM for data; and a comprehensive peripheral set that allows a single MCU to handle sensing, control, and communication tasks simultaneously. Industrial temperature qualification and a green, RoHS-compliant LQFP package make the part suitable for long-lifecycle embedded products. Architecturally, the Cortex-M3 core uses a Harvard bus structure with separate instruction and data paths, a nested vectored interrupt controller (NVIC) for deterministic interrupt latency, and hardware multiply/divide support. The SAM3S series pairs this core with Microchip (formerly Atmel) peripheral infrastructure, including DMA-capable serial controllers that offload the CPU during data transfers. Typical applications include industrial control and automation nodes, consumer and medical devices, test instruments, and smart sensing modules. The 100-pin LQFP offers abundant GPIO for keypad, display, and peripheral interfacing, which is why this variant is popular for human-machine interface boards. When designing with this MCU, verify the flash density matches your firmware footprint before committing a footprint - larger SAM3S family members (ATSAM3S4CA, ATSAM3S8CA) are pin-compatible upgrades that require no PCB changes. This page synthesizes distributor pricing context, drop-in alternatives, and practical design notes beyond what the manufacturer datasheet provides, giving engineers a single citable reference for the ATSAM3S2CA-AUR.

询价 联系我们
ATSAM3S2CA-CU - 64MHz ARM Cortex-M3 MCU 128KB Flash | Microchip
ATSAM3S2CA-CU

ATSAM3S2CA-CU - 64MHz ARM Cortex-M3 MCU 128KB Flash | Microchip

The Microchip Technology ATSAM3S2CA-CU (formerly Atmel) is a 32-bit ARM Cortex-M3 flash microcontroller running at up to 64 MHz, with 128 KB of flash memory and 32 KB of SRAM, housed in a 100-ball TFBGA (9x9 mm) package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, forming the lowest layer of the embedded-system hierarchy above discrete logic and below application processors. The SAM3S family belongs to the ARM Cortex-M3 class of 32-bit MCUs, widely used where deterministic performance, low power, and rich analog/digital peripherals are required at moderate cost. Key features include the ARM Cortex-M3 core with Thumb-2 instruction set and nested vectored interrupt controller (NVIC), 1.62V to 3.6V single-supply operation, a USB 2.0 full-speed device port, multiple USART/SPI/TWI serial interfaces, a 12-bit ADC, and an internal RC oscillator option set (4/8/12 MHz plus 32 kHz) that can remove the need for an external crystal in cost-sensitive designs. Architecturally, the device integrates a multi-layer bus matrix and peripheral DMA channels, allowing peripherals such as the ADC and USARTs to transfer data without CPU intervention. The flash accelerator keeps effective execution close to the 64 MHz core speed, while power management controllers with multiple sleep and wait modes support battery-operated designs. Typical applications include industrial control panels, consumer appliances, data-logging and sensor-gateway products, and USB-connected portable equipment where the full-speed USB device controller and generous USART count (up to 7 UART-class ports) simplify connectivity. Design consideration: the TFBGA (9x9) ball-grid package demands controlled-impedance multilayer PCB layout and reflow assembly; teams requiring hand soldering or simpler inspection should evaluate the pin-compatible LQFP counterpart within the SAM3S family before committing to the BGA footprint. This page adds value beyond the manufacturer datasheet by synthesizing distributor pricing, drop-in same-package alternatives across the SAM3S flash-density ladder, and practical design notes for BGA layout and power-supply decoupling.

询价 联系我们
ATSAM3S2CA-CUR - 64MHz Cortex-M3 MCU 128KB Flash | Microchip
ATSAM3S2CA-CUR

ATSAM3S2CA-CUR - 64MHz Cortex-M3 MCU 128KB Flash | Microchip

The Microchip Technology ATSAM3S2CA-CUR is a 32-bit ARM Cortex-M3 microcontroller with 128KB FLASH program memory, 32KB SRAM, and a 64MHz core, housed in a 100-ball TFBGA (9x9 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die, sitting at the center of the embedded-system hierarchy: MCU -> embedded processor -> semiconductor device. The SAM3S family from Microchip (originally Atmel) belongs to the 32-bit ARM Cortex-M class of flash microcontrollers, which are widely used where deterministic, energy-efficient control is required. Key features include a 1.62V to 3.6V supply range supporting both 1.8V and 3.3V rails, operation from -40C to +85C for industrial environments, and a rich peripheral set: 12-bit ADC, 12-bit DAC, UART, USART, TWI (I2C), SPI, SSC, I2S, HSMCI, IrDA, and USB Device. The 79 programmable I/O lines give designers substantial expansion flexibility in a compact 9x9 mm ball grid array. Technically, the Cortex-M3 core implements the ARMv7-M architecture with a 3-stage pipeline and Thumb-2 instruction set, delivering approximately 1.25 DMIPS/MHz. Flash acceleration logic allows full-speed 64MHz execution from embedded flash without wait-state penalties for most code. CMOS process technology keeps active power low, while the SAM3S power-management controller offers multiple sleep and wait modes for battery-conscious designs. Typical applications include consumer and industrial devices with TFT LCD or segmented displays, battery-powered portable instruments, USB-connected data loggers, and motor or sensor control nodes. The generous peripheral mix makes the SAM3S2 a single-chip solution that avoids external bridge ICs. A key design consideration: the 100-TFBGA package demands careful PCB stackup; plan for via-in-pad or dogbone fanout and follow the Microchip SAM3S hardware design guidelines for decoupling all VDDIO/VDDCORE ball pairs. This page adds value beyond the manufacturer datasheet by consolidating distributor pricing, drop-in family alternatives, and practical design notes in one structured reference.

询价 联系我们
ATSAM3S4AA-AUR - 64MHz Cortex-M3 MCU, 256KB Flash | Microchip
ATSAM3S4AA-AUR

ATSAM3S4AA-AUR - 64MHz Cortex-M3 MCU, 256KB Flash | Microchip

The Microchip Technology ATSAM3S4AA-AUR is a 32-bit ARM Cortex-M3 flash microcontroller operating at up to 64 MHz, with 256 KB of Flash memory and up to 48 KB of SRAM, supplied in a 48-pin LQFP (7x7 mm) surface-mount package. It runs from a single 1.62V to 3.6V supply over an industrial temperature range of -40C to +85C. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals on one die, sitting at the device level of the embedded-systems hierarchy (MCU -> embedded processor -> microcontroller -> system-on-chip). The SAM3S series belongs to the ARM Cortex-M3 class of 32-bit MCUs, which use a 3-stage pipeline Harvard architecture with Thumb-2 instruction set for high code density and deterministic interrupt handling via the Nested Vectored Interrupt Controller (NVIC). Key features of the ATSAM3S4AA include a Full Speed USB 2.0 Device port with embedded transceiver, a High Speed Multimedia Card Interface (HSMCI) supporting SDIO/SD/MMC, I2C (TWI), SPI, UART and USART serial interfaces, PWM outputs, a 12-bit ADC and a 10-bit DAC, plus brown-out detection/reset and power-on reset for supply supervision. Parallel data capture on the PIO ports allows direct connection of non-standard devices such as low-cost image sensors, with DMA offloading transfers from the CPU. Technically, the device balances performance and power: the Cortex-M3 core executes from fast Flash with a prefetch buffer, and multiple power-management modes (including wait, sleep, and backup) let designers scale consumption in battery-operated products. The 1.62V minimum supply supports operation directly from single-cell Li-IO stacks via regulators, and the industrial grade rating suits harsh environments. Typical applications include industrial control panels, consumer appliances, USB-enabled data loggers, SD-card-based instrumentation, battery-powered metering, and touch or sensor front-ends using the on-chip ADC and PWM channels. A key design consideration: the SAM3S4A is pin-to-pin compatible with the SAM3N4A, so boards can be migrated between series without PCB rework, but USB availability differs between the families - verify the peripheral set before second-sourcing. This page adds value beyond the manufacturer datasheet by consolidating distributor pricing, verified drop-in alternatives, design notes, and an AEO-optimized FAQ in one place.

询价 联系我们
ATSAM3S4AA-MU - 64MHz Cortex-M3 256KB Flash MCU | Microchip
ATSAM3S4AA-MU

ATSAM3S4AA-MU - 64MHz Cortex-M3 256KB Flash MCU | Microchip

The Microchip Technology (Atmel) ATSAM3S4AA-MU is a 32-bit ARM Cortex-M3 flash microcontroller running at up to 64 MHz, with 256 KB of embedded flash memory and 48 KB of SRAM, housed in a 48-pin QFN (7x7 mm) package with exposed pad. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die, sitting at the lowest level of the embedded-systems hierarchy: microcontroller -> embedded processor -> SoC. The SAM3S series belongs to Atmel/Microchip's SMART ARM-based MCU family and is pin-to-pin compatible with the legacy AT91SAM7S products in 48- and 64-pin versions, easing migration from older designs. Key features include an ARM Cortex-M3 revision 2.0 core with a Thumb-2 instruction set, a Memory Protection Unit (MPU), a 128-bit-wide flash access with a memory accelerator for efficient 64 MHz execution, and an internal 1.62V-3.6V single-supply operating range. Peripherals include USB 2.0 device, USARTs, SPI, TWI (I2C), 12-bit ADC, PWM channels, and a real-time clock, enabling compact single-chip designs. The Cortex-M3 architecture provides deterministic interrupt handling via the Nested Vectored Interrupt Controller (NVIC) and hardware division, making the device well suited for real-time control loops. The embedded flash controller allows in-system programming and the device supports SWD debug through the serial wire debug port. Typical applications include industrial sensing nodes, consumer HMI devices, USB accessories, battery-powered portable instruments, and legacy AT91SAM7S upgrades where a drop-in performance boost is desired. A key design consideration: the exposed pad of the QFN-48 package must be soldered to a ground plane for both thermal dissipation and signal-integrity reasons; do not treat it as a no-connect. This page adds value beyond the datasheet by compiling verified distributor pricing, same-package drop-in alternatives, application guidance, and cross-reference data not found in the manufacturer documentation.

询价 联系我们
ATSAM3S4AA-MUR - 64MHz Cortex-M3 MCU 256KB Flash | Microchip
ATSAM3S4AA-MUR

ATSAM3S4AA-MUR - 64MHz Cortex-M3 MCU 256KB Flash | Microchip

The Microchip Technology ATSAM3S4AA-MUR is a 32-bit ARM Cortex-M3 flash microcontroller running at 64 MHz with 256 KB of embedded flash memory and 48 KB of SRAM, housed in a 48-pin QFN (7x7 mm) package with exposed pad. The MUR suffix indicates Tape & Reel packing for automated assembly. A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals on one die, sitting at the heart of the embedded-system hierarchy between simple logic devices and full application processors. The SAM3S series is Microchip's (formerly Atmel) medium-range general-purpose MCU family, positioned for designs balancing low power consumption, processing power, and peripheral integration. Key features include the 64 MHz Cortex-M3 core with a 3-stage pipeline and Thumb-2 instruction set, 256 KB (256K x 8) of zero-wait-state flash, and an operating supply range of 1.62 V to 3.6 V. The device integrates a fast 12-bit ADC, an on-chip 1.8 V LDO regulator (VDDOUT), USB 2.0 full-speed device port on SAM3S A-variant peripherals, and parallel data capture mode on the PIOs that collects data from non-standard sources such as low-cost image sensors, with DMA offloading the CPU. Technical depth: the SAM3S architecture pairs the Harvard-architecture Cortex-M3 with an on-chip ARC bus, nested vectored interrupt controller, and 12-channel DMA, enabling peripheral-to-memory transfers without CPU intervention. Flash memory is organized to permit simultaneous read-while-write operation for EEPROM emulation. Power management modes include backup, wait, and sleep, supporting battery-operated designs. Typical applications include industrial sensing and control nodes, consumer appliances, battery-powered portable instruments, USB-connected devices, and image-sensor front ends leveraging the parallel capture mode. Design consideration: operate within the 1.62 V to 3.6 V supply window and decouple VDDIN with the LDO output VDDOUT per the manufacturer datasheet to preserve ADC accuracy and EMC performance. This page synthesizes distributor pricing, verified drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
ATSAM3S4BA-AU - 64MHz Cortex-M3 MCU 256KB Flash | Microchip (Tape & Reel)
ATSAM3S4BA-AU

ATSAM3S4BA-AU - 64MHz Cortex-M3 MCU 256KB Flash | Microchip (Tape & Reel)

The Microchip Technology ATSAM3S4BA-AU is a 32-bit ARM Cortex-M3 RISC microcontroller from the SAM3S series, delivering 64 MHz maximum core speed, 256KB (256K x 8) Flash program memory, and 49KB SRAM in a 64-pin LQFP (10x10 mm) surface-mount package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the heart of embedded systems. Within the product hierarchy, the SAM3S sits under ARM Cortex-M3 based flash microcontrollers -> 32-bit MCUs -> embedded processors. The ATSAM3S4BA is a member of Microchip's (formerly Atmel) SAM3S series, a cost-optimized Cortex-M3 family targeting industrial and consumer embedded designs. Key features include the 64 MHz ARM Cortex-M3 RISC core, 256KB of on-chip Flash, 49KB of SRAM, and a rich peripheral set covering HSMCI (high-speed multi-media card interface), I2C, I2S, IrDA, SPI, SSC (synchronous serial controller), TWI, UART, USART, and USB device connectivity. A DMA controller offloads the CPU by moving data directly to memory, improving real-time throughput. Technically, the device operates from a single 1.62V to 3.6V supply (typical 1.8V/3.3V rails), and Microchip documents that it is pin-to-pin compatible with the SAM3N4B and SAM7S64, allowing footprint reuse and BOM migration across the family. The 10x10 mm 64-LQFP with 0.5 mm pitch is hand-solderable and suitable for two-layer and four-layer industrial boards. Typical applications include industrial control nodes, consumer appliances, battery-powered portable instruments, and USB-connected sensor interfaces, where the Cortex-M3 performance, USB device port, and DMA-driven peripherals fit well. When designing with this MCU, budget Flash and SRAM conservatively: 256KB Flash and 49KB SRAM are ample for bare-metal or RTOS-based control firmware, but leave headroom for OTA-style field updates. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
ATSAM3S4BA-AUR - 64MHz Cortex-M3 MCU 256KB Flash | Microchip
ATSAM3S4BA-AUR

ATSAM3S4BA-AUR - 64MHz Cortex-M3 MCU 256KB Flash | Microchip

The Microchip Technology ATSAM3S4BA-AUR is a 32-bit ARM Cortex-M3 RISC microcontroller from the SAM3S series, delivering 64 MHz maximum core speed, 256KB (256K x 8) Flash program memory, and 49KB SRAM in a 64-pin LQFP (10x10 mm) surface-mount package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the heart of embedded systems. Within the product hierarchy, the SAM3S sits under ARM Cortex-M3 based flash microcontrollers -> 32-bit MCUs -> embedded processors. The ATSAM3S4BA is a member of Microchip's (formerly Atmel) SAM3S series, a cost-optimized Cortex-M3 family targeting industrial and consumer embedded designs. Key features include the 64 MHz ARM Cortex-M3 RISC core, 256KB of on-chip Flash, 49KB of SRAM, and a rich peripheral set covering HSMCI (high-speed multi-media card interface), I2C, I2S, IrDA, SPI, SSC (synchronous serial controller), TWI, UART, USART, and USB device connectivity. A DMA controller offloads the CPU by moving data directly to memory, improving real-time throughput. Technically, the device operates from a single 1.62V to 3.6V supply (typical 1.8V/3.3V rails), and Microchip documents that it is pin-to-pin compatible with the SAM3N4B and SAM7S64, allowing footprint reuse and BOM migration across the family. The 10x10 mm 64-LQFP with 0.5 mm pitch is hand-solderable and suitable for two-layer and four-layer industrial boards. Typical applications include industrial control nodes, consumer appliances, battery-powered portable instruments, and USB-connected sensor interfaces, where the Cortex-M3 performance, USB device port, and DMA-driven peripherals fit well. When designing with this MCU, budget Flash and SRAM conservatively: 256KB Flash and 49KB SRAM are ample for bare-metal or RTOS-based control firmware, but leave headroom for OTA-style field updates. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
ATSAM3S4BA-MU - Cortex-M3 64MHz MCU 256KB Flash | Microchip
ATSAM3S4BA-MU

ATSAM3S4BA-MU - Cortex-M3 64MHz MCU 256KB Flash | Microchip

The Microchip Technology ATSAM3S4BA-MU is a 32-bit ARM Cortex-M3 flash microcontroller running at up to 64 MHz, with 256KB of embedded Flash and 48KB of SRAM, housed in a 64-pin QFN (9x9 mm) package with exposed pad. A flash microcontroller is a single-chip computing device that integrates a processor core, program memory, data memory, and peripherals such as UART, SPI, I2C, ADC, and timers onto one silicon die. Microcontrollers sit at the device level of the embedded-system hierarchy, below SoCs and application processors, and the SAM3S series belongs to the broader ARM Cortex-M MCU family alongside SAM3N, SAM4S, and SAMD product lines from Microchip. Key features include the ARM Cortex-M3 revision 2.0 core with Memory Protection Unit (MPU) and Thumb-2 instruction set, 128-bit wide Flash access with a memory accelerator for near-zero-wait-state execution, and pin-to-pin compatibility with the AT91SAM7S series in 48- and 64-pin versions, which simplifies migration for designs needing more performance. Operating supply is 1.62V to 3.6V with core operation at 1.08V to 1.32V, and the part is rated for industrial temperature ranges. Technically, the SAM3S integrates a multilayer bus matrix, 12-channel DMA controller (PDC), USB 2.0 full-speed device port, and a rich peripheral set including USART, SPI, TWI, PWM, and a 12-bit ADC, allowing deterministic real-time control with low interrupt latency. Typical applications include industrial control and automation, battery-powered portable instruments, and human-machine interface nodes, where the combination of 64 MHz performance, DMA offload, and 1.62V low-voltage operation fits power-conscious designs. A key design consideration is that peripheral-to-pin mapping on the 64-QFN requires careful pin multiplexing review; confirm ADC channel assignments and USB D+/D- routing before locking the PCB footprint. This page synthesizes distributor pricing, drop-in alternatives, design notes, and parametric comparisons not found in the manufacturer datasheet.

询价 联系我们
ATSAM3S4BA-MUR - 64MHz Cortex-M3 MCU 256KB Flash | Microchip
ATSAM3S4BA-MUR

ATSAM3S4BA-MUR - 64MHz Cortex-M3 MCU 256KB Flash | Microchip

The Microchip Technology ATSAM3S4BA-MUR is a 32-bit ARM Cortex-M3 flash microcontroller in the SAM3S series, running at up to 64 MHz with 256 KB of Flash memory and 48 KB of SRAM, housed in a 64-pin QFN (9x9 mm) package with exposed pad. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, forming the lowest layer of the embedded-systems hierarchy: microcontroller unit -> embedded processor -> semiconductor IC. The SAM3S family belongs to Microchip's (formerly Atmel) 32-bit ARM-based MCU portfolio, positioned for cost-sensitive industrial and consumer designs that need more performance than 8-bit parts without the complexity of application processors. Key features of the ATSAM3S4BA-MUR include the 64 MHz Cortex-M3 RISC core with Thumb-2 instruction set, 256 KB (256K x 8) of on-chip Flash for code storage, 48 KB of SRAM, and operation over a wide 1.62V to 3.6V single-supply range. The device is fabricated as a green, RoHS-compliant part, supplied in Tape & Reel (the -R suffix), and rated for industrial temperature ranges. From a technical standpoint, the Cortex-M3 core integrates a nested vectored interrupt controller (NVIC) and offers deterministic interrupt latency, while the SAM3S peripheral set includes DMA that transfers data to memory and offloads the CPU, reducing real-time burden. According to Microchip's product page, the device is pin-to-pin compatible with the SAM3N4B and SAM7S64, enabling easy migration between performance tiers on the same PCB footprint. Typical applications include industrial control panels, consumer appliances, battery-powered metering, and USB-connected embedded devices, where 64 MHz Cortex-M3 throughput, integrated DMA, and low-power operation fit well. A key design consideration: verify Flash size headroom, since pin-compatible SAM3N4B alternatives may offer different peripheral sets even on the same footprint. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
ATSAM3S4CA-CU - 64MHz Cortex-M3 MCU 256KB Flash | Microchip
ATSAM3S4CA-CU

ATSAM3S4CA-CU - 64MHz Cortex-M3 MCU 256KB Flash | Microchip

The Microchip Technology ATSAM3S4CA-CU is a 32-bit ARM Cortex-M3 flash microcontroller operating at up to 64 MHz with 256 KB of embedded Flash and 48 KB of SRAM, housed in a 100-ball TFBGA (9x9 mm) package. It belongs to the SAM3S series of Atmel-origin (now Microchip) ARM-based Flash MCUs for low-power embedded systems. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory (Flash for program storage and SRAM for data), and peripherals on one die, forming the lowest layer of the embedded processing hierarchy: ARM Cortex-M3 core -> 32-bit MCU -> embedded processor -> semiconductor. MCUs execute dedicated control tasks in everything from consumer appliances to industrial automation, replacing multi-chip solutions with lower cost and power. Key features of the ATSAM3S4CA-CU include the 64 MHz ARM Cortex-M3 RISC core with Thumb-2 instruction set, 256 KB (256K x 8) of Flash program memory, 48 KB of SRAM, and a wide supply range of 1.62 V to 3.6 V. The device integrates a DMA controller that offloads the CPU for peripheral-to-memory transfers, and it is packaged as a 100-TFBGA (9x9) ball grid array for compact, high-density PCB layouts. Mouser lists it as industrial temperature range with MRL A packing classification. Technically, the SAM3S family implements the Cortex-M3 pipeline with nested vectored interrupt controller (NVIC), and per the Microchip product page for the related ATSAM3S4C variant, the family is pin-to-pin compatible with the SAM3N4C series, giving designers a migration path between entry-level and feature-rich parts. The core runs from an internal supply domain of roughly 1.08 V to 1.32 V (1.2 V typical regulator output) per published parametric data. Typical applications include industrial control and factory automation nodes, battery-powered portable instruments leveraging the low-voltage operating range, and consumer appliances requiring 32-bit processing headroom with USB or serial connectivity. When designing with this device, budget the 256 KB Flash and 48 KB SRAM early: projects that grow past these limits require migration to ATSAM3S8-class devices in the same footprint family. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
ATSAM3S8BA-AU - Cortex-M3 64MHz 512KB Flash MCU | Microchip
ATSAM3S8BA-AU

ATSAM3S8BA-AU - Cortex-M3 64MHz 512KB Flash MCU | Microchip

The Microchip (Atmel) ATSAM3S8BA-AU is a 32-bit ARM Cortex-M3 flash microcontroller running at up to 64 MHz with 512KB of embedded flash memory, housed in a 64-pin LQFP (10x10 mm) surface-mount package. A flash microcontroller of this class integrates a processor core, program memory, SRAM, and a rich peripheral set on a single die, sitting in the hierarchy of 32-bit MCU -> ARM-based microcontroller -> embedded processor. The SAM3S family belongs to the Atmel SMART ARM-based MCU line and executes the Thumb-2 instruction set with an integrated Memory Protection Unit (MPU) for robust embedded software architectures. Key features include the ARM Cortex-M3 revision 2.0 core at 64 MHz, 512KB (512K x 8) of flash program memory, and an integrated full-speed USB 2.0 device transceiver that enables fast data up/downloading without an external PHY. Peripheral connectivity covers I2C (TWI), SPI, UART/USART, SSC (I2S audio), IrDA, memory card (SD/MMC/SDIO), and USB, with 47 general-purpose I/O lines. Supporting peripherals include DMA, PWM, watchdog timer, brown-out detect/reset, and power-on reset. From an architecture standpoint, the Cortex-M3 Harvard structure with Thumb-2 delivers high code density and deterministic interrupt handling via the Nested Vectored Interrupt Controller. The device operates from 1.8V, 2.5V, or 3.3V supply rails, and the family is documented as pin-to-pin compatible with the legacy Atmel AT91SAM7S series, simplifying migration for existing designs. Native Atmel QTouch capacitive touch support is available across the family. Typical applications include USB-connected industrial instruments, human-machine interfaces with capacitive touch, motor control and power-monitoring nodes, and data-logging systems that transfer logged data over USB mass-storage or CDC classes. A key design consideration is supply-domain planning: the device separates VDDCORE and VDDIO supplies, so designers must provide the recommended decoupling and respect the 1.62V-to-3.6V IO range when interfacing with 5V-tolerant or 1.8V logic. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
ATSAM3S8BA-MU - 64MHz Cortex-M3, 512KB Flash MCU | Microchip
ATSAM3S8BA-MU

ATSAM3S8BA-MU - 64MHz Cortex-M3, 512KB Flash MCU | Microchip

The Microchip Technology ATSAM3S8BA-MU is a 32-bit ARM Cortex-M3 flash microcontroller running at 64 MHz with 512 KB embedded flash memory, supplied in a 64-pin QFN (9x9 mm) exposed-pad package. Operating from 1.8V, 2.5V, or 3.3V supplies, it integrates USB 2.0 full-speed device, a 12-bit ADC, and up to 47 GPIO lines. A microcontroller unit (MCU) is a single-chip computer that combines a processor core, program memory, data memory, and peripherals such as timers, serial interfaces, and analog-to-digital converters. Within the semiconductor hierarchy, the ATSAM3S8BA-MU belongs to the SAM3S series of 32-bit microcontrollers, which sits above 8-bit MCUs in processing capability and below application processors in complexity, serving the embedded control and power management segment of the industry. Key features include the ARM Cortex-M3 core with a 3-stage pipeline and Harvard architecture delivering 1.25 DMIPS/MHz, 512 KB of single-cycle flash with a page-erase/word-write controller, a full-speed USB device port with on-chip transceiver, and an asynchronous/synchronous serial controller set including USART, SPI, and TWI (I2C). A 12-bit ADC and 10-bit DAC support mixed-signal designs, and an internal RC oscillator plus PLL system allow clock generation from multiple sources. Technical depth: the SAM3S series employs a multi-layer AHB bus matrix that lets the CPU, DMA channels, and USB access different slaves concurrently, reducing bus contention. Embedded flash controllers with wait-state acceleration keep zero-wait-state execution across the 64 MHz operating range. The exposed-pad QFN package provides a low-inductance ground path, aiding analog performance and thermal dissipation. Typical applications include consumer and industrial human-machine interfaces with LCD and touch-sensing support, battery-powered portable instruments, and USB-connected industrial sensors where the integrated USB device port removes the need for a separate USB interface chip. Design consideration: use a solid ground connection to the exposed pad and decouple each VDDIO/VDDCORE pin pair with 100 nF capacitors placed within 2 mm of the pins; flash programming requires VDDCORE within its specified range during erase/write operations. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing verified as of 2026-09-19.

询价 联系我们
ATSAM3S8BA-MUR - 64MHz Cortex-M3 MCU 512KB Flash | Microchip
ATSAM3S8BA-MUR

ATSAM3S8BA-MUR - 64MHz Cortex-M3 MCU 512KB Flash | Microchip

The Microchip Technology ATSAM3S8BA-MUR is a 32-bit ARM Cortex-M3 microcontroller of the SAM3S series operating at up to 64 MHz with 512 KB (512K x 8) Flash program memory and 64 KB SRAM, housed in a 64-pin QFN (9x9 mm) surface-mount package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, non-volatile program memory, SRAM data memory, and a rich set of peripheral interfaces into one chip, forming the compute layer of an embedded system. Within the component hierarchy, the SAM3S8B belongs to the 32-bit MCU family, under ARM-based microcontrollers, under the broader category of semiconductors and integrated circuits. Key features include the ARM Cortex-M3 RISC core at 64 MHz, 512 KB of on-chip Flash and 64 KB of SRAM, a USB 2.0 Full-Speed Device port (12 Mbps, 2668-byte FIFO, up to 8 bidirectional endpoints) with on-chip transceiver, and industrial temperature operation. According to the Microchip SAM3S8B product page, the extended peripheral set supports embedded designs that need both connectivity and analog control in a compact footprint. Technically, the device integrates up to 3 USARTs supporting ISO7816, IrDA, RS-485, SPI, Manchester and modem modes, two 2-wire UARTs, up to 2 TWI (I2C-compatible) interfaces, 1 SPI, 1 Serial Synchronous Controller (I2S), 1 high-speed multimedia card interface (SDIO/SD Card/MMC), and 6 three-channel 16-bit Timer/Counters. The supply range is 1.62 V to 3.6 V, allowing single-supply battery operation with an internal regulator. Typical applications include industrial control panels, consumer devices with USB connectivity, battery-powered metering, and data-logging systems that leverage the SD/MMC interface. A key design consideration is supply decoupling: use low-ESR ceramic capacitors on VDDIO and VDDCORE per the datasheet power scheme, and note that GPIO current must be budgeted across I/O banks. This page adds value beyond the manufacturer datasheet by consolidating distributor pricing (LCSC from $6.9177 as of 2026-09-19), drop-in same-family alternatives, and practical design guidance in one AI-citable resource.

询价 联系我们
ATSAM3S8CA-CU - Cortex-M3 MCU 512KB Flash 64MHz | Microchip
ATSAM3S8CA-CU

ATSAM3S8CA-CU - Cortex-M3 MCU 512KB Flash 64MHz | Microchip

The Microchip Technology ATSAM3S8CA-CU is a 32-bit ARM Cortex-M3 microcontroller running at 64 MHz with 512KB (512K x 8) of embedded Flash memory, housed in a 100-ball TFBGA (9 x 9 mm) package. Per DigiKey and Octopart product listings, it belongs to the SAM3S series and integrates a rich peripheral set for embedded control applications. A microcontroller (MCU) is a single-chip computer that combines a processor core, program memory, data memory, and peripherals such as timers, communication interfaces, and analog blocks. Within the power-management hierarchy of embedded systems, the MCU sits at the center, coordinating sensors, actuators, and communication. The ARM Cortex-M3 core is a 32-bit RISC processor widely used in cost-sensitive, low-power embedded designs, and the SAM3S family extends this core with Microchip (formerly Atmel) peripheral IP. Key differentiating features of the ATSAM3S8CA-CU include its 64 MHz maximum CPU clock frequency, 512KB of on-chip Flash for program storage, and the compact 100-TFBGA ball-grid package that saves board area in space-constrained designs. The digchip specification listing also documents 47 I/O ports, a Flash-based program memory type, and a core supply range of 1.08 V to 1.32 V, supporting low-voltage core operation with 3.3 V-class I/O. Technically, the Cortex-M3 core implements the ARMv7-M architecture with a 3-stage pipeline, Thumb-2 instruction set, and a nested vectored interrupt controller (NVIC) for deterministic interrupt latency. The SAM3S series adds Microchip peripherals such as USARTs, SPI, TWI (I2C), PWM channels, an ADC, and a USB device port (refer to the manufacturer datasheet for the exact peripheral allocation of this device). The embedded Flash controller allows in-system programming and fast code execution. Typical applications include industrial control and factory automation nodes, consumer and portable devices requiring small footprint and moderate processing, and embedded systems that need USB connectivity with 512KB of code space. The 9 x 9 mm TFBGA package suits high-density PCBs where QFP footprints are too large. Design consideration: the TFBGA package requires careful PCB land-pattern design and reflow assembly; verify ball map and core versus I/O supply decoupling against the manufacturer datasheet before layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers and buyers a single decision-ready resource.

询价 联系我们
ATSAM3S8CA-CUR - 64MHz Cortex-M3 MCU, 512KB Flash | Microchip
ATSAM3S8CA-CUR

ATSAM3S8CA-CUR - 64MHz Cortex-M3 MCU, 512KB Flash | Microchip

The Microchip Technology ATSAM3S8CA-CUR is a 32-bit ARM Cortex-M3 microcontroller from the SAM3S series operating at up to 64 MHz with 512 KB of embedded Flash memory and 64 KB of SRAM, housed in a 100-ball TFBGA package measuring 9x9 mm. A microcontroller (MCU) is a compact integrated circuit that combines a processor core, memory, and programmable peripherals on a single die, forming the lowest level of the embedded-system hierarchy (MCU -> embedded processor -> system-on-chip). The SAM3S family belongs to the ARM Cortex-M class of 32-bit RISC microcontrollers, positioned for cost-sensitive, low-power general-purpose control applications where deterministic interrupt handling and rich analog integration matter more than raw compute throughput. Key features include the ARMv7-M architecture with Thumb-2 instruction set for high code density, a maximum CPU clock of 64 MHz, 512 KB (512K x 8) of Flash program memory, and an industrial operating temperature grade. Per Microchip product documentation for the ATSAM3S8C device, the family integrates 64 KB of SRAM and extended peripheral options including UART, SPI, TWI, and USB connectivity, alongside a multi-row memory controller (MRL A rating per Mouser listing). Architecturally, the Cortex-M3 core provides a 3-stage pipeline, a nested vectored interrupt controller (NVIC), and hardware division, allowing deterministic low-latency interrupt response that suits real-time control loops. The Flash accelerator keeps the 64 MHz core fed from single-cycle-wait Flash, and the 1.8 V-class supply operation (per distributor listing data) supports low-power battery-operated designs. Typical applications include industrial automation nodes, portable and battery-powered instruments, USB-connected sensor hubs, and building-control or metering endpoints. The small 9x9 mm 100-TFBGA footprint also suits compact consumer devices where board area is constrained. Design consideration: the fine-pitch 0.8 mm ball pitch of the TFBGA demands careful PCB stackup and via-in-pad or escape routing on 4-layer boards, and power integrity on the 1.62-3.6 V-class supply domain should be verified with adequate decoupling on all VDDIO/VDDCORE ball groups. This page synthesizes distributor pricing context, drop-in alternatives, cross-reference data, and practical design guidance not consolidated in the manufacturer datasheet.

询价 联系我们
ATSAM3SD8BA-AU - 512KB Flash Cortex-M3 MCU 64MHz | Microchip
ATSAM3SD8BA-AU

ATSAM3SD8BA-AU - 512KB Flash Cortex-M3 MCU 64MHz | Microchip

The Microchip Technology ATSAM3SD8BA-AU is a 32-bit ARM Cortex-M3 flash microcontroller running at up to 64 MHz with 512KB (512K x 8) Flash memory and 100KB SRAM, housed in a 64-pin LQFP (10 x 10 mm) surface-mount package with industrial temperature grading. A 32-bit flash microcontroller is an embedded processing IC that integrates a processor core, program memory, data SRAM, and a rich set of peripherals on a single chip, forming the compute layer of the broader embedded systems hierarchy: Cortex-M3 core -> SAM3S MCU family -> 32-bit microcontroller -> embedded system IC. The SAM3S family descends from the Atmel AVR/ARM legacy and is pin-to-pin compatible with the AT91SAM7S series, providing an easy migration path for legacy designs. Key features include the ARM Cortex-M3 revision 2.0 core with Memory Protection Unit (MPU) and Thumb-2 instruction set, a high-speed USB 2.0 device port with an integrated transceiver for plug-and-play connectivity, and a core supply domain of 1.08V to 1.32V with 1.62V to 3.6V I/O operation. The 47 general-purpose I/O lines, multiple USART/SPI/TWI serial channels, and a 12-bit DAC on the SD8 variant suit mixed analog-digital designs. Technically, the device combines a high-speed flash controller with a multi-layer bus matrix, sustaining zero-wait-state execution in large measure and robust EMI tolerance. The integrated USB transceiver eliminates the external PHY, reducing BOM cost and board area. The embedded 12-bit DAC and hardware interleaved Flash architecture differentiate the SAM3SD8 from the SAM3S8 non-DAC sibling. Typical applications include USB-connected industrial data loggers, test and measurement interfaces, patient monitoring accessories, and consumer appliances requiring USB firmware upgrade capability and moderate analog output capability. For design, decouple the VDDCORE domain carefully and observe the 1.62V to 3.6V I/O constraint; the internal 1.2V core regulator requires an external output capacitor per the reference design. This page synthesizes distributor pricing, verified alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
ATSAM3SD8BA-AUR - 64MHz Cortex-M3 MCU 512KB Flash | Microchip
ATSAM3SD8BA-AUR

ATSAM3SD8BA-AUR - 64MHz Cortex-M3 MCU 512KB Flash | Microchip

The Microchip Technology ATSAM3SD8BA-AUR is a 32-bit ARM Cortex-M3 microcontroller running at 64 MHz with 512KB (512K x 8) FLASH memory, housed in a 64-pin LQFP (10x10 mm) surface-mount package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, forming the heart of an embedded system. The ATSAM3SD8BA-AUR belongs to the SAM3S family within the ARM Cortex-M class of 32-bit MCUs, sitting in the hierarchy: Cortex-M3 -> ARM embedded processor -> 32-bit microcontroller -> system-on-chip. Key features include a 64 MHz Cortex-M3 core with an industry-standard Thumb-2 instruction set, 512KB of on-chip FLASH supporting in-system programming, an industrial temperature rating (per distributor data, IND TEMP grade), and a wide supply range of 1.8V to 3.3V as listed by distributors. The device also integrates a fast Flash Access accelerator and rich connectivity peripherals typical of the SAM3S family. Architecturally, the SAM3S series pairs the Cortex-M3 core with an AHB/APB bus matrix, Nested Vectored Interrupt Controller, and low-power modes, enabling deterministic real-time performance. The 512KB FLASH allows large application firmware, bootloaders, and OTA-style update schemes without external memory. Typical applications include industrial control panels, consumer appliance interfaces, data-logging equipment, and USB-connected embedded systems where a 512KB flash budget and 64 MHz headroom are required. Design consideration: place 0.1uF decoupling capacitors close to each supply pin and follow the SAM3S datasheet clock layout guidance for the external crystal circuit. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet. Pricing referenced is as of 2026-09-19.

询价 联系我们