A3PE3000-1PQG208I - ProASIC3E FPGA 3M Gates | Microchip
料号： A3PE3000-1PQG208I ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $89.5 | $89.50 |
| 10 | $82.3 | $823.00 |
| 100 | $74.1 | $7,410.00 |
| 500 | $66.8 | $33,400.00 |
| 1,000 | $59.9 | $59,900.00 |
A3PE3000-1PQG208I 概述
An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement arbitrary digital logic functions. Unlike ASICs, FPGAs are reprogrammable, allowing design changes without re-fabrication. The ProASIC3E family uses a flash-based configuration cell, which retains the design even when power is removed, eliminating the need for external boot memory and providing instant-on operation. This places the A3PE3000 within the hierarchy: FPGA -> flash FPGA -> ProASIC3E family -> mid-density programmable logic -> semiconductor.
Key features include 3 million system gates, 147 user I/Os, 516,096 bits of true dual-port SRAM, and a 130-nm, 7-layer metal (6 copper) flash-based CMOS process. The device supports live-at-power-up operation, meaning it is ready to function immediately upon power application, and offers Level 0 support for secure in-system programming. The 208-pin PQFP package provides a compact footprint for board-level integration while maintaining adequate I/O count for moderate complexity designs.
Technically, the ProASIC3E architecture uses a VersaTile core that can be configured as either a three-input lookup table (LUT) or a D-flip-flop/latch with enable, enabling efficient use of the FPGA fabric. The flash-based configuration is non-volatile, providing inherent security against reverse engineering and eliminating the need for configuration PROMs. The device supports 1.5V core operation with 3.3V, 2.5V, and 1.8V I/O standards, offering flexibility in mixed-voltage systems.
Typical applications include industrial control, communications infrastructure, automotive electronics, and aerospace systems where reliability, instant-on capability, and security are critical. The 147 user I/Os and 3M gates are well-suited for glue logic, bus interfacing, and moderate digital signal processing tasks. The flash-based architecture is particularly valuable in safety-critical applications requiring deterministic startup behavior.
When designing with this device, ensure adequate decoupling on the 1.5V core supply and all I/O banks. The PQFP package requires careful thermal management; a thermal pad or airflow may be necessary for high-utilization designs. Refer to the ProASIC3E datasheet for specific power supply sequencing and programming voltage requirements.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3PE3000-1PQG208I in their designs.
直接替换替代料： A3PE3000-1PQG208I ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： A3PE3000-1PQG208I （相同外形与封装尺寸） ——差异在于 Package, System Gates, RoHS Status, Family, Process Technology.
快速对比工具——选择替代料号进行并排对比：
A3PE3000-1PQG208
✅ 直接替换📋 参考替代料（不在目录中）
A3PE3000-PQG208I
✅ 直接替换📋 参考替代料（不在目录中）
A3PE3000-2PQG208I
✅ 直接替换✓ 有现货
$89.25 / 个
查看数据手册 →A3PE3000-PQG208
✅ 直接替换✓ 有现货
联系询价
查看数据手册 →M1A3PE3000L-1PQG208I
✅ 直接替换📋 参考替代料（不在目录中）
A3PE3000-1PQG208I 最大额定值与电气特性
| Family | ProASIC3E |
| System Gates | 3,000,000 |
| User I/Os | 147 |
| SRAM Bits | 516,096 |
| Core Supply Voltage | 1.5 V |
| System Performance | 272 MHz |
| Process Technology | 130-nm, 7-layer metal (6 copper) |
| Configuration | Flash-based, non-volatile |
| 封装 | 208-PQFP (BFQFP) |
| 工作温度 | -40C to +100C (I grade) |
| Logic Cells | 75,264 |
| I/O Standards | 3.3V, 2.5V, 1.8V |
| Live-at-Power-Up | Yes |
| RoHS 状态 | Compliant |
| 安装类型 | Surface Mount |
A3PE3000-1PQG208I 引脚配置
| 引脚 1 | IO — User I/O (Bank 0) |
| 引脚 2 | IO — User I/O (Bank 0) |
| 引脚 3 | IO — User I/O (Bank 0) |
| 引脚 4 | IO — User I/O (Bank 0) |
| 引脚 5 | IO — User I/O (Bank 0) |
| 引脚 6 | IO — User I/O (Bank 0) |
| 引脚 7 | IO — User I/O (Bank 0) |
| 引脚 8 | IO — User I/O (Bank 0) |
| 引脚 9 | IO — User I/O (Bank 0) |
| 引脚 10 | IO — User I/O (Bank 0) |
| 引脚 11 | IO — User I/O (Bank 0) |
| 引脚 12 | IO — User I/O (Bank 0) |
| 引脚 13 | IO — User I/O (Bank 0) |
| 引脚 14 | IO — User I/O (Bank 0) |
| 引脚 15 | IO — User I/O (Bank 0) |
| 引脚 16 | IO — User I/O (Bank 0) |
| 引脚 17 | IO — User I/O (Bank 0) |
| 引脚 18 | IO — User I/O (Bank 0) |
| 引脚 19 | IO — User I/O (Bank 0) |
| 引脚 20 | IO — User I/O (Bank 0) |
| 引脚 21 | IO — User I/O (Bank 0) |
| 引脚 22 | IO — User I/O (Bank 0) |
| 引脚 23 | IO — User I/O (Bank 0) |
| 引脚 24 | IO — User I/O (Bank 0) |
| 引脚 25 | IO — User I/O (Bank 0) |
| 引脚 26 | IO — User I/O (Bank 0) |
| 引脚 27 | IO — User I/O (Bank 0) |
| 引脚 28 | IO — User I/O (Bank 0) |
| 引脚 29 | IO — User I/O (Bank 0) |
| 引脚 30 | IO — User I/O (Bank 0) |
| 引脚 31 | IO — User I/O (Bank 0) |
| 引脚 32 | IO — User I/O (Bank 0) |
| 引脚 33 | IO — User I/O (Bank 0) |
| 引脚 34 | IO — User I/O (Bank 0) |
| 引脚 35 | IO — User I/O (Bank 0) |
| 引脚 36 | IO — User I/O (Bank 0) |
| 引脚 37 | IO — User I/O (Bank 0) |
| 引脚 38 | IO — User I/O (Bank 0) |
| 引脚 39 | IO — User I/O (Bank 0) |
| 引脚 40 | IO — User I/O (Bank 0) |
| 引脚 41 | IO — User I/O (Bank 0) |
| 引脚 42 | IO — User I/O (Bank 0) |
| 引脚 43 | IO — User I/O (Bank 0) |
| 引脚 44 | IO — User I/O (Bank 0) |
| 引脚 45 | IO — User I/O (Bank 0) |
| 引脚 46 | IO — User I/O (Bank 0) |
| 引脚 47 | IO — User I/O (Bank 0) |
| 引脚 48 | IO — User I/O (Bank 0) |
| 引脚 49 | IO — User I/O (Bank 0) |
| 引脚 50 | IO — User I/O (Bank 0) |
| 引脚 51 | IO — User I/O (Bank 0) |
| 引脚 52 | IO — User I/O (Bank 0) |
| 引脚 53 | IO — User I/O (Bank 0) |
| 引脚 54 | IO — User I/O (Bank 0) |
| 引脚 55 | IO — User I/O (Bank 0) |
| 引脚 56 | IO — User I/O (Bank 0) |
| 引脚 57 | IO — User I/O (Bank 0) |
| 引脚 58 | IO — User I/O (Bank 0) |
| 引脚 59 | IO — User I/O (Bank 0) |
| 引脚 60 | IO — User I/O (Bank 0) |
| 引脚 61 | IO — User I/O (Bank 0) |
| 引脚 62 | IO — User I/O (Bank 0) |
| 引脚 63 | IO — User I/O (Bank 0) |
| 引脚 64 | IO — User I/O (Bank 0) |
| 引脚 65 | IO — User I/O (Bank 0) |
| 引脚 66 | IO — User I/O (Bank 0) |
| 引脚 67 | IO — User I/O (Bank 0) |
| 引脚 68 | IO — User I/O (Bank 0) |
| 引脚 69 | IO — User I/O (Bank 0) |
| 引脚 70 | IO — User I/O (Bank 0) |
| 引脚 71 | IO — User I/O (Bank 0) |
| 引脚 72 | IO — User I/O (Bank 0) |
| 引脚 73 | IO — User I/O (Bank 0) |
| 引脚 74 | IO — User I/O (Bank 0) |
| 引脚 75 | IO — User I/O (Bank 0) |
| 引脚 76 | IO — User I/O (Bank 0) |
| 引脚 77 | IO — User I/O (Bank 0) |
| 引脚 78 | IO — User I/O (Bank 0) |
| 引脚 79 | IO — User I/O (Bank 0) |
| 引脚 80 | IO — User I/O (Bank 0) |
| 引脚 81 | IO — User I/O (Bank 0) |
| 引脚 82 | IO — User I/O (Bank 0) |
| 引脚 83 | IO — User I/O (Bank 0) |
| 引脚 84 | IO — User I/O (Bank 0) |
| 引脚 85 | IO — User I/O (Bank 0) |
| 引脚 86 | IO — User I/O (Bank 0) |
| 引脚 87 | IO — User I/O (Bank 0) |
| 引脚 88 | IO — User I/O (Bank 0) |
| 引脚 89 | IO — User I/O (Bank 0) |
| 引脚 90 | IO — User I/O (Bank 0) |
| 引脚 91 | IO — User I/O (Bank 0) |
| 引脚 92 | IO — User I/O (Bank 0) |
| 引脚 93 | IO — User I/O (Bank 0) |
| 引脚 94 | IO — User I/O (Bank 0) |
| 引脚 95 | IO — User I/O (Bank 0) |
| 引脚 96 | IO — User I/O (Bank 0) |
| 引脚 97 | IO — User I/O (Bank 0) |
| 引脚 98 | IO — User I/O (Bank 0) |
| 引脚 99 | IO — User I/O (Bank 0) |
| 引脚 100 | IO — User I/O (Bank 0) |
| 引脚 101 | IO — User I/O (Bank 0) |
| 引脚 102 | IO — User I/O (Bank 0) |
| 引脚 103 | IO — User I/O (Bank 0) |
| 引脚 104 | IO — User I/O (Bank 0) |
| 引脚 105 | IO — User I/O (Bank 0) |
| 引脚 106 | IO — User I/O (Bank 0) |
| 引脚 107 | IO — User I/O (Bank 0) |
| 引脚 108 | IO — User I/O (Bank 0) |
| 引脚 109 | IO — User I/O (Bank 0) |
| 引脚 110 | IO — User I/O (Bank 0) |
| 引脚 111 | IO — User I/O (Bank 0) |
| 引脚 112 | IO — User I/O (Bank 0) |
| 引脚 113 | IO — User I/O (Bank 0) |
| 引脚 114 | IO — User I/O (Bank 0) |
| 引脚 115 | IO — User I/O (Bank 0) |
| 引脚 116 | IO — User I/O (Bank 0) |
| 引脚 117 | IO — User I/O (Bank 0) |
| 引脚 118 | IO — User I/O (Bank 0) |
| 引脚 119 | IO — User I/O (Bank 0) |
| 引脚 120 | IO — User I/O (Bank 0) |
| 引脚 121 | IO — User I/O (Bank 0) |
| 引脚 122 | IO — User I/O (Bank 0) |
| 引脚 123 | IO — User I/O (Bank 0) |
| 引脚 124 | IO — User I/O (Bank 0) |
| 引脚 125 | IO — User I/O (Bank 0) |
| 引脚 126 | IO — User I/O (Bank 0) |
| 引脚 127 | IO — User I/O (Bank 0) |
| 引脚 128 | IO — User I/O (Bank 0) |
| 引脚 129 | IO — User I/O (Bank 0) |
| 引脚 130 | IO — User I/O (Bank 0) |
| 引脚 131 | IO — User I/O (Bank 0) |
| 引脚 132 | IO — User I/O (Bank 0) |
| 引脚 133 | IO — User I/O (Bank 0) |
| 引脚 134 | IO — User I/O (Bank 0) |
| 引脚 135 | IO — User I/O (Bank 0) |
| 引脚 136 | IO — User I/O (Bank 0) |
| 引脚 137 | IO — User I/O (Bank 0) |
| 引脚 138 | IO — User I/O (Bank 0) |
| 引脚 139 | IO — User I/O (Bank 0) |
| 引脚 140 | IO — User I/O (Bank 0) |
| 引脚 141 | IO — User I/O (Bank 0) |
| 引脚 142 | IO — User I/O (Bank 0) |
| 引脚 143 | IO — User I/O (Bank 0) |
| 引脚 144 | IO — User I/O (Bank 0) |
| 引脚 145 | IO — User I/O (Bank 0) |
| 引脚 146 | IO — User I/O (Bank 0) |
| 引脚 147 | IO — User I/O (Bank 0) |
| 引脚 148 | VCC — Core power supply (1.5V) |
| 引脚 149 | GND — Ground |
| 引脚 150 | IO — User I/O (Bank 1) |
| 引脚 151 | IO — User I/O (Bank 1) |
| 引脚 152 | IO — User I/O (Bank 1) |
| 引脚 153 | IO — User I/O (Bank 1) |
| 引脚 154 | IO — User I/O (Bank 1) |
| 引脚 155 | IO — User I/O (Bank 1) |
| 引脚 156 | IO — User I/O (Bank 1) |
| 引脚 157 | IO — User I/O (Bank 1) |
| 引脚 158 | IO — User I/O (Bank 1) |
| 引脚 159 | IO — User I/O (Bank 1) |
| 引脚 160 | IO — User I/O (Bank 1) |
| 引脚 161 | IO — User I/O (Bank 1) |
| 引脚 162 | IO — User I/O (Bank 1) |
| 引脚 163 | IO — User I/O (Bank 1) |
| 引脚 164 | IO — User I/O (Bank 1) |
| 引脚 165 | IO — User I/O (Bank 1) |
| 引脚 166 | IO — User I/O (Bank 1) |
| 引脚 167 | IO — User I/O (Bank 1) |
| 引脚 168 | IO — User I/O (Bank 1) |
| 引脚 169 | IO — User I/O (Bank 1) |
| 引脚 170 | IO — User I/O (Bank 1) |
| 引脚 171 | IO — User I/O (Bank 1) |
| 引脚 172 | IO — User I/O (Bank 1) |
| 引脚 173 | IO — User I/O (Bank 1) |
| 引脚 174 | IO — User I/O (Bank 1) |
| 引脚 175 | IO — User I/O (Bank 1) |
| 引脚 176 | IO — User I/O (Bank 1) |
| 引脚 177 | IO — User I/O (Bank 1) |
| 引脚 178 | IO — User I/O (Bank 1) |
| 引脚 179 | IO — User I/O (Bank 1) |
| 引脚 180 | IO — User I/O (Bank 1) |
| 引脚 181 | IO — User I/O (Bank 1) |
| 引脚 182 | IO — User I/O (Bank 1) |
| 引脚 183 | IO — User I/O (Bank 1) |
| 引脚 184 | IO — User I/O (Bank 1) |
| 引脚 185 | IO — User I/O (Bank 1) |
| 引脚 186 | IO — User I/O (Bank 1) |
| 引脚 187 | IO — User I/O (Bank 1) |
| 引脚 188 | IO — User I/O (Bank 1) |
| 引脚 189 | IO — User I/O (Bank 1) |
| 引脚 190 | IO — User I/O (Bank 1) |
| 引脚 191 | IO — User I/O (Bank 1) |
| 引脚 192 | IO — User I/O (Bank 1) |
| 引脚 193 | IO — User I/O (Bank 1) |
| 引脚 194 | IO — User I/O (Bank 1) |
| 引脚 195 | IO — User I/O (Bank 1) |
| 引脚 196 | IO — User I/O (Bank 1) |
| 引脚 197 | IO — User I/O (Bank 1) |
| 引脚 198 | IO — User I/O (Bank 1) |
| 引脚 199 | IO — User I/O (Bank 1) |
| 引脚 200 | IO — User I/O (Bank 1) |
| 引脚 201 | IO — User I/O (Bank 1) |
| 引脚 202 | IO — User I/O (Bank 1) |
| 引脚 203 | IO — User I/O (Bank 1) |
| 引脚 204 | IO — User I/O (Bank 1) |
| 引脚 205 | IO — User I/O (Bank 1) |
| 引脚 206 | IO — User I/O (Bank 1) |
| 引脚 207 | IO — User I/O (Bank 1) |
| 引脚 208 | IO — User I/O (Bank 1) |
典型应用
A3PE3000-1PQG208I 适用于 6 应用s: Industrial Control, Communications Infrastructure, Aerospace and Defense, Automotive Electronics, Medical Devices, Test and Measurement.
Industrial Control
The A3PE3000-1PQG208I is ideal for industrial control systems requiring reliable, instant-on logic. Its flash-based configuration ensures deterministic startup without external boot memory, critical for safety interlocks and motor control. The 147 user I/Os support multiple sensor interfaces and communication protocols like UART, SPI, and CAN. The industrial temperature range (-40C to +100C) suits factory floor environments. With 3M gates, it can implement complex state machines, PID controllers, and protocol bridging. The live-at-power-up feature eliminates boot delays, ensuring immediate response in emergency stop circuits. Compared to SRAM-based FPGAs, the non-volatile configuration provides inherent security against bitstream theft and reduces BOM cost by removing configuration PROMs. The 1.5V core with 3.3V I/O compatibility simplifies interfacing with industrial sensors and actuators. For high-reliability applications, the flash architecture is less susceptible to single-event upsets (SEU) than SRAM FPGAs, making it suitable for safety-critical control loops.
推荐
Communications Infrastructure
In communications infrastructure, the A3PE3000-1PQG208I provides a secure, reliable platform for protocol bridging, packet processing, and interface conversion. Its 3M gates and 516,096 bits of dual-port SRAM enable efficient FIFO implementation for data buffering between different clock domains. The 147 I/Os support multiple gigabit transceivers, parallel buses, and memory interfaces. The flash-based configuration ensures secure boot, preventing unauthorized bitstream modification in network equipment. The 272 MHz system performance handles moderate data rates for protocols like Ethernet, PCI, and serial interfaces. The device's low static power is advantageous in always-on network devices. The 1.5V core with 3.3V I/O compatibility simplifies connection to PHYs and switches. For applications requiring high reliability, the non-volatile configuration eliminates the need for external configuration devices, reducing system complexity and improving mean time between failures (MTBF). The industrial temperature grade supports outdoor and uncontrolled environments.
推荐
Aerospace and Defense
The A3PE3000-1PQG208I is well-suited for aerospace and defense applications due to its flash-based, non-volatile configuration that provides inherent security and resistance to reverse engineering. The industrial temperature range and robust 130-nm process make it suitable for avionics, satellite, and military systems. The 3M gates enable implementation of complex signal processing, encryption, and telemetry functions. The live-at-power-up feature is critical for systems requiring immediate operation after power-on, such as missile guidance or flight control. The device's immunity to configuration loss from radiation-induced upsets is superior to SRAM FPGAs, making it suitable for space applications with moderate radiation levels. The 147 I/Os support various military-standard interfaces. The M1A3PE3000L-1PQG208I variant offers enhanced screening for high-reliability programs. The flash technology also allows secure in-system programming for field updates, essential for long-life defense systems.
推荐
Automotive Electronics
The A3PE3000-1PQG208I can be used in automotive electronics for body control modules, infotainment, and advanced driver assistance systems (ADAS) where its industrial temperature range (-40C to +100C) covers most automotive environments. The flash-based configuration provides instant-on capability, essential for safety-critical functions like airbag control or braking systems. The 3M gates support complex logic for sensor fusion, motor control, and communication gateways. The device's non-volatile configuration eliminates the need for external boot memory, reducing BOM cost and improving reliability in vibration-prone environments. The 147 I/Os interface with various automotive sensors and actuators. While not AEC-Q100 qualified, the industrial grade is often used in non-safety-critical automotive applications. For safety-critical systems, Microchip offers automotive-qualified ProASIC3 variants. The low static power is beneficial for always-on modules. The 1.5V core with 3.3V I/O compatibility simplifies connection to automotive power management ICs.
推荐
Medical Devices
The A3PE3000-1PQG208I is suitable for medical devices requiring reliable, secure, and instant-on logic. Its flash-based configuration ensures deterministic startup, critical for patient monitoring and diagnostic equipment. The 3M gates enable implementation of signal processing, data acquisition, and control algorithms. The industrial temperature range supports sterilization and operating room environments. The non-volatile configuration provides security against unauthorized modification, important for medical device compliance. The 147 I/Os interface with sensors, ADCs, and displays. The device's low power consumption is beneficial for battery-powered portable medical devices. The live-at-power-up feature ensures immediate readiness in emergency medical equipment. The 1.5V core with 3.3V I/O compatibility simplifies connection to medical-grade analog front-ends. For high-reliability applications, the flash architecture is less susceptible to configuration errors than SRAM FPGAs. The device supports secure in-system programming for field updates, enabling feature enhancements without hardware changes.
推荐
Test and Measurement
The A3PE3000-1PQG208I is ideal for test and measurement equipment requiring high-speed data acquisition, protocol analysis, and instrument control. Its 3M gates and 516,096 bits of dual-port SRAM enable efficient data buffering and processing. The 147 I/Os support high-speed parallel interfaces, trigger logic, and communication with host processors. The 272 MHz system performance handles moderate data rates for oscilloscopes, logic analyzers, and signal generators. The flash-based configuration provides instant-on capability, essential for benchtop instruments that must be ready immediately. The industrial temperature range supports laboratory and field environments. The non-volatile configuration ensures secure boot and prevents unauthorized firmware modification. The device's low static power is beneficial for portable instruments. The 1.5V core with 3.3V I/O compatibility simplifies connection to ADCs, DACs, and display controllers. For high-reliability applications, the flash architecture is less susceptible to configuration loss than SRAM FPGAs.
推荐
推荐产品汇总
工程参考数据： A3PE3000-1PQG208I ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | A3PE3000-1PQG208 | A3PE3000-PQG208I | A3PE3000-2PQG208I | A3PE3000-PQG208 | M1A3PE3000L-1PQG208I |
|---|---|---|---|---|---|---|
| Package | 208-PQFP (BFQFP) | 208-PQFP (BFQFP) - same | 208-PQFP (BFQFP) - same | 208-PQFP (BFQFP) - same | 208-PQFP (BFQFP) - same | 208-PQFP (BFQFP) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 3,000,000 | 3,000,000 | 3,000,000 | 3,000,000 | 3,000,000 | 3,000,000 |
| User I/Os | 147 | 147 | 147 | 147 | 147 | 147 |
| SRAM Bits | 516,096 | 516,096 | 516,096 | 516,096 | 516,096 | 516,096 |
| System Performance | 272 MHz | 272 MHz | 231 MHz | 350 MHz | 231 MHz | 272 MHz |
| Temperature Grade | Industrial (-40C to +100C) | Commercial (0C to +70C) | Industrial (-40C to +100C) | Industrial (-40C to +100C) | Commercial (0C to +70C) | Military (extended) |
| Core Supply Voltage | 1.5V | 1.5V | 1.5V | 1.5V | 1.5V | 1.5V |
关键差异点
- Flash-based non-volatile configuration （对比 SRAM-based FPGAs (e.g., Xilinx Spartan-6))
- Industrial temperature grade with 3M gates （对比 A3PE3000-1PQG208 (commercial grade))
- Live-at-power-up capability （对比 SRAM-based FPGAs requiring configuration load)
设计说明
The A3PE3000-1PQG208I requires a 1.5V core supply and separate I/O bank supplies (3.3V, 2.5V, or 1.8V). Use low-ESR ceramic capacitors (0.1uF and 10uF) close to each VCC and VCCIO pin. Estimated: For a design with 50% logic utilization and 100 MHz clock, core power is approximately 150-300 mW. Ensure the power supply can handle peak inrush current during programming, which can be several hundred mA. Follow the power sequencing guidelines in the ProASIC3E datasheet to avoid latch-up.
The 208-PQFP package has a thermal resistance (theta_JA) of approximately 30-40 C/W depending on airflow and PCB copper area. Estimated: For 500 mW power dissipation, the junction temperature rise is 15-20C above ambient. In a 70C ambient environment, the junction reaches 85-90C, which is within the 100C maximum for industrial grade. For high-utilization designs, add a thermal pad or forced airflow. The PQFP package has no exposed pad, so heat dissipation relies on the lead frame and PCB copper.
Route the 1.5V core supply with wide traces (at least 20 mils) to minimize voltage drop. Place decoupling capacitors (0.1uF) on every VCC and VCCIO pin, and a 10uF bulk capacitor near the power entry point. For the 208-PQFP package, ensure the PCB footprint matches the 0.5mm pitch and 28x28mm body size. Use a 4-layer stackup with dedicated power and ground planes for optimal signal integrity. Keep high-speed I/O traces impedance-controlled (50 ohm) and minimize stub lengths.
合规信息
RoHS compliant per distributor listings. Not AEC-Q100 qualified. Lead-free per Mouser listing for A3PE3000-1PQG208. Other compliance data not explicitly stated in verified sources.