Analog Devices

AD5303ARU - Dual 8-Bit Rail-to-Rail DAC | Analog Devices

料号: AD5303ARU ✓ 量产中
2.5 V to 5.5 V Vdss 230 uA at 3 V Id 16-lead TSSOP Package 30 MHz Speed
最小起订量: 1 |

AD5303ARU 概述

The Analog Devices AD5303ARU is a dual 8-bit buffered voltage-output digital-to-analog converter operating from a single 2.5 V to 5.5 V supply in a 16-lead TSSOP package. It combines two independent DAC channels, on-chip output amplifiers, and a 3-wire serial interface that supports clock rates up to 30 MHz. The converter consumes 230 uA at a 3 V supply, making it suitable for low-power instrumentation and control systems.

A DAC is a data-conversion integrated circuit that translates a digital code into a proportional analog voltage or current. The AD5303 belongs to the voltage-output DAC family, where buffered outputs are driven directly by on-chip amplifiers. Its rail-to-rail output stage allows the analog outputs to approach the available supply rails, while the dual-channel architecture supports two independent analog control or excitation channels in a compact footprint.

The principal features include 8-bit resolution on each channel, a versatile 3-wire serial interface compatible with SPI, QSPI, MICROWIRE, and DSP interface standards, and serial clock operation up to 30 MHz. Each converter derives its reference from a dedicated reference pin, allowing the two output voltages to be scaled independently. The single-supply operating range supports both 3.3 V and 5 V systems.

Internally, the device uses a resistor-string DAC architecture followed by buffered output amplifiers. This arrangement provides direct voltage output without requiring an external output buffer and simplifies connection to analog front ends. The 16-lead TSSOP package is suitable for compact analog and mixed-signal designs, while the dual channel count improves utilization when a system needs two matched control signals.

Typical applications include industrial process control, programmable test and measurement equipment, battery-powered instrumentation, sensor excitation, automated test equipment, and general-purpose analog signal generation. Its 230 uA current consumption at 3 V is especially useful in portable and distributed sensing systems where each subsystem must limit standby power.

Designers should treat the reference pins as precision analog nodes, route them away from digital switching currents, and use the pin-description table in the manufacturer datasheet when assigning PCB tracks. Confirm output settling time, reference voltage limits, and logic-level compatibility against the intended clock rate and analog settling requirements.

This page combines manufacturer specifications, drop-in device alternatives, application guidance, and design notes for engineers evaluating the AD5303ARU across low-power analog and mixed-signal systems.

直接替换替代料: AD5303ARU ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

AD5303ARUZ

✅ 直接替换
📦 16-lead TSSOP
Same dual 8-bit DAC function and 16-lead TSSOP pinout; ordering and tape-and-reel designation differ by 0% in core electrical specifications

📋 参考替代料(不在目录中)

AD5303BRU

✅ 直接替换
📦 16-lead TSSOP
Same dual 8-bit DAC architecture, 2.5 V to 5.5 V supply, and 16-lead TSSOP package; ordering grade differs while core electrical parameters match

📋 参考替代料(不在目录中)

AD5313ARUZ

✅ 直接替换 ⚠️ 规格未核验
📦 16-lead TSSOP
Resolution increases from 8 bits to 10 bits while supply, dual-channel architecture, and 16-lead TSSOP interface remain compatible

📋 参考替代料(不在目录中)

AD5313BRU

✅ 直接替换 ⚠️ 规格未核验
📦 16-lead TSSOP
Resolution increases from 8 bits to 10 bits, a 25% increase, with the same dual-buffer and 16-lead TSSOP organization

📋 参考替代料(不在目录中)

AD5323ARUZ

✅ 直接替换 ⚠️ 规格未核验
📦 16-lead TSSOP
Resolution increases from 8 bits to 12 bits while retaining the dual-channel, single-supply, 16-lead TSSOP family architecture

📋 参考替代料(不在目录中)

AD5323BRU

✅ 直接替换 ⚠️ 规格未核验
📦 16-lead TSSOP
Resolution increases from 8 bits to 12 bits, a 50% increase, with matching 16-lead TSSOP package organization and dual outputs

📋 参考替代料(不在目录中)

AD5303ARU 最大额定值与电气特性

Number of DAC Channels 2
分辨率 8 bits per channel
DAC Architecture Resistor string with buffered voltage output
Supply Voltage Range 2.5 V to 5.5 V
Current Consumption 230 uA at 3 V
输出类型 Buffered voltage output
Output Swing Rail-to-rail
Serial Interface 3-wire serial interface
Interface Compatibility SPI, QSPI, MICROWIRE, and DSP interfaces
Maximum Serial Clock Rate 30 MHz
Reference Inputs 2 independent reference pins
封装 16-lead TSSOP
安装类型 Surface mount

AD5303ARU 16-lead tssop 引脚配置指南

AD5303ARU(16-lead tssop 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

AD5303ARU 的 16-lead tssop 封装引脚图

暂无详细引脚数据: AD5303ARU.

请参阅 数据手册 以查看完整引脚配置。

典型应用

AD5303ARU 适用于 6 应用s: Industrial Process Control, Programmable Test and Measurement, Portable Sensor Excitation, Battery-Powered Data Acquisition, Automated Test Equipment, Audio and Communication Control.

🏭

Industrial Process Control

The AD5303ARU fits closed-loop industrial controllers that need two adjustable analog command outputs from a compact controller board. Its two independent 8-bit channels can represent actuator commands, setpoints, or offset adjustments, while the 2.5 V to 5.5 V supply range supports both 24 V industrial designs with local regulation and compact 5 V control electronics. The 30 MHz serial-interface capability provides ample bandwidth for periodic updates from an industrial microcontroller or PLC interface module. Because the outputs use buffered rail-to-rail stages, external unity-gain amplifiers are unnecessary for normal high-impedance loads. Confirm loop settling requirements and analog input ranges before using the 8-bit step size for precision positioning.

🧪

Programmable Test and Measurement

The AD5303ARU can generate two independent stimulus levels for automated test equipment, bench instruments, and board-level test fixtures. Its 3-wire serial interface supports SPI, QSPI, MICROWIRE, and DSP standards, while operation up to 30 MHz permits rapid code updates during automated sequences. A dual converter avoids duplicating the digital interface and reference distribution when a fixture requires two bias or excitation voltages. The buffered rail-to-rail outputs can drive high-impedance measurement inputs directly, although cable loading, settling time, and reference accuracy must be evaluated for each channel. The 230 uA consumption at 3 V also supports compact low-power test modules.

📱

Portable Sensor Excitation

The AD5303ARU is useful in portable or distributed sensor modules that must provide adjustable excitation or offset voltages beside a sensing frontend. Its 230 uA current consumption at a 3 V supply leaves more of the system power budget for sensing, signal conditioning, and short-range communications. Two independently referenced outputs can drive separate resistive bridges or compensate two measurement channels without duplicating the converter package. Rail-to-rail buffered operation provides useful output range in low-voltage designs, but the selected reference and load must remain within their documented limits. Validate the 8-bit resolution against the required excitation step, and account for reference drift when long-duration measurements depend on accurate excitation.

🖥️

Battery-Powered Data Acquisition

The AD5303ARU supports low-power data-acquisition systems that need controllable analog outputs alongside sensors and amplifiers. Its single-supply operation from 2.5 V to 5.5 V allows direct use of a regulated 3.3 V or 5 V rail, and the 230 uA consumption at 3 V limits the converter's contribution to standby demand. Two buffered channels can generate offset, span, or excitation voltages for instrumentation amplifiers and analog-to-digital converters. Because the DAC includes on-chip output amplifiers, the signal path remains compact, but external protection may be needed when outputs drive long cables or potentially mistuned loads. Confirm output stability, reference settling, and sleep-state behavior in the complete analog subsystem.

🛠️

Automated Test Equipment

The AD5303ARU is appropriate for automated test equipment that commands two analog levels through a common digital bus. Its SPI-compatible 3-wire interface and clock rate up to 30 MHz allow the converter to be updated rapidly between test steps without requiring separate data buses for each channel. Rail-to-rail buffered outputs support common low-voltage fixture biases and signal conditioning inputs, while the dual-reference arrangement allows independent scaling of the two commands. The 16-lead TSSOP package conserves board area in densely populated test-interface cards. When accuracy is critical, characterize the reference at temperature, verify full-scale settling after a code change, and keep high-current switching nodes away from the reference and analog output traces.

🌐

Audio and Communication Control

The AD5303ARU can provide two low-level control or bias voltages in audio and communication equipment where a dedicated audio codec is unnecessary. The buffered rail-to-rail outputs may set mixer-control levels, line-driver references, or small signal offsets, and the fast 3-wire interface allows a host controller to update both channels during configuration. Its 230 uA consumption at 3 V suits compact peripheral modules, although noise-sensitive analog paths require careful grounding and reference filtering. Because this is an 8-bit converter, use it for coarse control levels rather than fine amplitude synthesis, and evaluate glitch energy when updating codes between sensitive operating states. Keep return currents out of the reference ground path to avoid modulation of the two outputs.

What is the operating voltage of the AD5303ARU?
The AD5303ARU operates from a single 2.5 V to 5.5 V supply. According to the Analog Devices AD5303 product page, this range supports 3 V and 5 V systems, while the specified 230 uA consumption applies at a 3 V supply. The dual converter therefore fits both low-voltage portable equipment and conventional 5 V industrial control boards without requiring a separate negative analog supply.
How many DAC channels and bits does the AD5303ARU provide?
The AD5303ARU provides two independent 8-bit voltage-output DAC channels. Analog Devices describes the AD5303, AD5313, and AD5323 as dual 8-bit, 10-bit, and 12-bit buffered converters, respectively, all using a 16-lead TSSOP package. The AD5303 is the 8-bit member of that family and uses a resistor-string DAC architecture with on-chip output amplifiers.
Which serial interfaces are compatible with the AD5303ARU?
The AD5303ARU uses a 3-wire serial interface compatible with SPI, QSPI, MICROWIRE, and DSP standards. According to the Analog Devices AD5303 product page, the interface operates at clock rates up to 30 MHz. This makes the device suitable for microcontroller, DSP, and programmable-instrumentation systems where two low-power digital code-to-analog outputs are required.
Where can I download the AD5303ARU datasheet PDF?
The official AD5303 datasheet and product information are available from the Analog Devices product page at https://www.analog.com/en/products/ad5303.html. The manufacturer page links the device documentation and describes the AD5303ARU as an 8-bit, dual, rail-to-rail buffered voltage-output DAC in a 16-lead TSSOP package. Use the manufacturer datasheet for the complete pin-description table, electrical characteristics, and recommended application circuits.
Where can I find the AD5303ARU pinout?
The AD5303ARU pinout is documented in the Analog Devices AD5303 datasheet and its outline-dimensions section. The component uses a 16-lead TSSOP package with one reference connection for each DAC channel. Assign PCB tracks using the numbered pin-description table and package drawing in the manufacturer datasheet, rather than relying on the general AD5303 family description.
Can the AD5303ARU drive an analog input directly?
Yes, the AD5303ARU includes on-chip output amplifiers, so its two channels can drive analog inputs without an external unity-gain buffer. The output amplifiers support rail-to-rail operation, allowing each voltage to approach the supply limits. Check the load impedance, output settling time, and output-current limits in the datasheet when driving sampling circuits, amplifiers, or downstream sensors.
What are the key specifications of the AD5303ARU that engineers should know?
The AD5303ARU combines two 8-bit buffered voltage-output DAC channels, a 2.5 V to 5.5 V supply range, and 230 uA current consumption at 3 V. Its 3-wire serial interface supports SPI, QSPI, MICROWIRE, and DSP standards with clock rates up to 30 MHz. The 16-lead TSSOP package and rail-to-rail outputs suit compact, low-power analog and mixed-signal designs.
When should I choose the AD5303ARU over the AD5303BRU?
Choose the AD5303ARU when the board requires the Analog Devices AD5303 in its standard commercial ordering configuration. The AD5303BRU is the alternative grade or ordering designation shown in distributor cross-reference listings for the same 8-bit dual DAC family. Confirm the ordering code, temperature range, and qualification requirements against the current Analog Devices ordering guide before releasing a replacement to production.
Is the AD5303ARU suitable for low-power instrumentation?
Yes, the AD5303ARU is well suited to low-power instrumentation because it consumes 230 uA at a 3 V supply while providing two buffered analog outputs. The 2.5 V to 5.5 V operating range permits use in coin-cell, portable, and distributed sensing systems. Overall system power still depends on the reference source, digital interface activity, load current, and the analog circuitry connected to each output.
Is the AD5303ARU pin-compatible with the AD5313 and AD5323?
The AD5303, AD5313, and AD5323 are offered in the same 16-lead TSSOP family, with the defining difference being 8-bit, 10-bit, and 12-bit resolution. Their common package and serial-interface organization make them useful alternatives when a design can be reconfigured, but software scaling and register behavior must be reviewed before substituting a higher-resolution part into an existing AD5303 design.
What can replace the AD5303ARU?
The closest drop-in alternatives are the AD5303ARUZ and AD5303BRU, followed by the AD5313ARUZ, AD5313BRU, AD5323ARUZ, and AD5323BRU family variants. The AD5303 variants preserve the 8-bit function and 16-lead TSSOP organization, while the AD5313 and AD5323 increase resolution to 10 and 12 bits. Review interface behavior, reference wiring, and software compatibility before replacement.
What is the best Analog Devices equivalent for the AD5303ARU?
The best same-manufacturer equivalent depends on whether resolution or ordering code is the deciding factor. AD5303ARUZ and AD5303BRU remain in the 8-bit dual-DAC family, while AD5313ARUZ, AD5313BRU, AD5323ARUZ, and AD5323BRU provide 10-bit or 12-bit resolution in the same 16-lead TSSOP family. The AD5303 grade is preferable when existing 8-bit data formatting must remain unchanged.
What is the difference between the AD5303ARU and AD5303ARUZ?
The AD5303ARU and AD5303ARUZ provide the same core AD5303 dual 8-bit DAC function in a 16-lead TSSOP package, with identical stated performance parameters of 2.5 V to 5.5 V operation, 230 uA consumption at 3 V, and rail-to-rail buffered outputs. Their ordering designations differ, so confirm reel, tape, grade, and temperature details against the current Analog Devices ordering information.
Where can I buy the AD5303ARU and check current availability?
Use the Request a Quote form on this page to ask about AD5303ARU stock, minimum order quantity, current lead time, and volume pricing. The component is listed in distributor catalogs and cross-reference systems, but availability changes with demand and regional inventory. Providing your required quantity, date code preference, and shipment destination allows the manufacturer or authorized channel to confirm a firm allocation.
What is the price of the AD5303ARU?
Pricing for the AD5303ARU depends on order quantity, date code, inventory position, and shipment terms, so it is best requested through the Request a Quote form on this page. The form is the correct route for a current quotation, volume-break review, and lead-time confirmation. Avoid treating historic distributor catalog values as a live quotation because component pricing and inventory can change without notice.

工程参考数据: AD5303ARU ——对比、设计指导和合规信息。

选型指南

Choose the AD5303ARU when the system requires two buffered 8-bit voltage outputs, a single 2.5 V to 5.5 V supply, and a compact 16-lead TSSOP implementation. It is a strong fit for coarse industrial control, programmable bias generation, and low-power sensor excitation where 8-bit command resolution is sufficient. Select AD5303ARUZ or AD5303BRU when the confirmed ordering or grade configuration better matches procurement, while checking temperature and packaging requirements. Use AD5313ARUZ or AD5313BRU when 10-bit resolution improves analog granularity, and AD5323ARUZ or AD5323BRU when 12-bit resolution is required. Higher-resolution alternatives still require code-scaling and interface verification. If the application needs substantially more precision than an 8-bit step, a dedicated high-resolution DAC may be preferable. Request the current lead time and availability through the Request a Quote form before committing the production design.

与替代料对比

参数 本产品 AD5303ARUZ AD5303BRU AD5313ARUZ AD5313BRU AD5323ARUZ AD5323BRU
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-lead TSSOP 16-lead TSSOP - same 16-lead TSSOP - same 16-lead TSSOP - same 16-lead TSSOP - same 16-lead TSSOP - same 16-lead TSSOP - same
Resolution 8 bits 8 bits 8 bits 10 bits 10 bits 12 bits 12 bits
Number of DAC Channels 2 2 2 2 2 2 2
Supply Voltage Range 2.5 V to 5.5 V 2.5 V to 5.5 V 2.5 V to 5.5 V 2.5 V to 5.5 V 2.5 V to 5.5 V 2.5 V to 5.5 V 2.5 V to 5.5 V
Output Type Buffered rail-to-rail voltage output Buffered rail-to-rail voltage output Buffered rail-to-rail voltage output Buffered voltage output Buffered voltage output Buffered voltage output Buffered voltage output
Serial Interface 3-wire SPI, QSPI, MICROWIRE, and DSP compatible 3-wire serial interface 3-wire serial interface 3-wire serial interface 3-wire serial interface 3-wire serial interface 3-wire serial interface
Maximum Serial Clock Rate 30 MHz 30 MHz 30 MHz 30 MHz 30 MHz 30 MHz 30 MHz
Reference Architecture One reference pin per DAC channel One reference pin per DAC channel One reference pin per DAC channel One reference pin per DAC channel One reference pin per DAC channel One reference pin per DAC channel One reference pin per DAC channel

关键差异点

  • Lower output resolution than the higher-resolution family alternatives (对比 AD5323ARUZ)
  • Dual buffered outputs without external output amplifiers (对比 AD5313ARUZ)
  • Directly compatible with SPI-style host interfaces (对比 AD5303BRU)

设计说明

Treat both reference pins as sensitive analog nodes. Route each reference directly to its assigned pin, keep the traces short, and avoid routing them beneath digital clock or serial-data lines. If a reference source sits far from the converter, place the required bypass capacitor at the device rather than at the source. This prevents supply and reference transients from appearing simultaneously on both analog outputs.

Use a compact analog and digital floor-plan with the converter near the interface controller, while keeping analog outputs and reference routing away from switching nodes. The TSSOP package allows the analog pins to be grouped, but pin assignments must be taken from the manufacturer pin-description table. Provide a quiet return path and avoid connecting output return current through the reference ground region.

Do not assume that identical package dimensions guarantee identical behavior when moving from the 8-bit AD5303 to a 10-bit AD5313 or 12-bit AD5323. Confirm serial-register behavior, code scaling, output settling, and reference requirements after substitution. Similarly, confirm the ordering grade and temperature range of AD5303BRU before using it as a production replacement for AD5303ARU.

The 230 uA specification applies to the converter at a 3 V supply. Total analog-channel power depends on the reference source, load current, and whether either output is disabled or updated continuously. Decouple the single supply close to the device and verify startup behavior at the minimum 2.5 V operating voltage, especially when the output load pulls downward during code transitions.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The manufacturer product page confirms RoHS-relevant product information availability, but no explicit compliance statement was extracted. The component is an analog data converter rather than an automotive-qualified device.

数据核验日期: 2026-11-18 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

AD5303ARU datasheet AD5303ARU datasheet pdf AD5303ARU pinout AD5303ARU specifications Analog Devices AD5303ARU AD5303ARU equivalent AD5303ARU replacement AD5303ARU vs AD5313ARUZ AD5303ARU vs AD5323ARUZ AD5303ARU price AD5303ARU stock AD5303 dual 8-bit DAC AD5303 TSSOP application circuit AD5303ARU lead time

相关元器件 & 术语

Analog Devices AD5303ARU AD5303ARUZ AD5303BRU AD5313ARUZ AD5313BRU AD5323ARUZ AD5323BRU digital-to-analog converter DAC voltage-output DAC resistor-string DAC buffered output amplifier rail-to-rail output SPI QSPI MICROWIRE DSP interface 3-wire serial interface TSSOP-16 surface-mount package 2.5 V to 5.5 V supply 230 uA low-power operation industrial process control programmable test and measurement sensor excitation data acquisition automated test equipment
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情