AD623BRZ - 800 kHz Rail-to-Rail INA | Analog Devices
料号: AD623BRZ ✓ 量产中AD623BRZ 概述
An instrumentation amplifier is a specialized analog amplifier optimized for measuring small differential signals superimposed on a larger common-mode voltage. Its internal topology combines differential input amplification, high input impedance, and common-mode rejection. The AD623BRZ belongs to the instrumentation-amplifier hierarchy within amplifier ICs and interface ICs, providing a practical alternative to constructing a balanced differential amplifier from several discrete operational amplifiers.
The AD623 can operate from single or dual supplies, and its output can swing close to the supply rails. A single external gain-setting resistor programs the closed-loop gain, simplifying designs that require adjustable signal amplification. The device also provides internal gain-set resistors for common gain selections and supports operation with a single external resistor where continuous gain adjustment is useful. Its rail-to-rail output stage improves usable output range in low-voltage systems.
With an 800 kHz bandwidth and approximately 0.3 V/µs slew rate, the AD623BRZ can process signals faster than many low-frequency precision instrumentation amplifiers. This bandwidth is especially useful for sensor outputs whose useful content includes pulse, vibration, or other time-varying components. The operating range of 2.7 V to 12 V accommodates battery-powered, industrial, laboratory, and portable measurement equipment without requiring a high-voltage analog supply.
Typical applications include bridge-transducer excitation and readout, pressure and strain measurement, biomedical instrumentation, current sensing, industrial process monitoring, and buffered differential sensor interfaces. The 8-lead SOIC package supports conventional surface-mount assembly while exposing input, output, reference, supply, and gain-configuration connections in an industry-standard format.
For reliable operation, maintain the supply voltage within 2.7 V to 12 V and ensure that input and output common-mode voltages remain within the device's permitted range. Gain selection requires careful resistance placement to minimize parasitic capacitance and thermal noise. Decoupling capacitors should be positioned close to the supply pins, while sensitive input routing should minimize pickup and board contamination.
This page combines the Analog Devices product information, package and sourcing details, strict drop-in alternatives, and practical application guidance to support component selection and PCB implementation. It also highlights verified differences among the AD623BRZ and related AD623 orderable part numbers so engineers can assess replacement risk before modifying a production design.
直接替换替代料: AD623BRZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: AD623BRZ (相同外形与封装尺寸) ——差异在于 Package, Amplifier Type, Gain Programming, Gain Range, Number of Circuits.
AD623ARZ-R7
✅ 直接替换✓ 有现货
$2.65 / 个
查看数据手册 →AD623BR
✅ 直接替换📋 参考替代料(不在目录中)
AD623BRZ 最大额定值与电气特性
| Amplifier Type | Single-circuit instrumentation amplifier |
| Number of Circuits | 1 circuit |
| Supply Voltage Range | 2.7 V to 12 V |
| Output Swing | Rail-to-rail |
| Gain | Programmable, up to 25 |
| Gain Programming | Single external gain-set resistor |
| Bandwidth | 800 kHz |
| Slew Rate | 0.3 V/µs |
| 封装 | 8-lead SOIC |
| 安装类型 | Surface mount |
| RoHS 状态 | unknown |
| REACH Status | unknown |
AD623BRZ 8-lead soic 引脚配置指南
AD623BRZ(8-lead soic 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: AD623BRZ.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AD623BRZ 适用于 6 应用s: Bridge Transducer Signal Conditioning, Pressure and Strain Measurement, Battery-Powered Sensor Interface, Current Sensing and Power Monitoring, Biomedical and Physiological Sensing, Industrial Process Monitoring.
Bridge Transducer Signal Conditioning
The AD623BRZ is appropriate for conditioning a resistive bridge output because it amplifies the differential voltage generated by the bridge while rejecting the common-mode voltage present on both input nodes. Its programmable gain up to 25 lets a designer establish the required measurement span, and the 800 kHz bandwidth supports signals beyond static weight or temperature measurements. The bridge should use excitation voltage and sensor resistance that remain compatible with the input limits. Place the gain resistor close to the device and route the two input signals symmetrically to minimize conversion of common-mode pickup into differential error.
推荐
Pressure and Strain Measurement
The AD623BRZ can amplify the small differential output of a piezoresistive pressure sensor or strain gauge while the sensor remains exposed to a substantially larger common-mode voltage. A 2.7 V to 12 V operating range supports compact portable and industrial measurement systems, while the rail-to-rail output improves utilization of low-voltage supplies. The 800 kHz bandwidth is suitable for dynamic events when it is filtered against mechanical and electrical noise. Differential input routing, input protection, reference selection, and gain-resistor placement determine whether the measured strain or pressure is reproduced accurately.
推荐
Battery-Powered Sensor Interface
The AD623BRZ is useful in battery-powered acquisition systems because it accepts supply voltages from 2.7 V to 12 V and provides rail-to-rail output swing. That operating range allows a sensor and instrumentation amplifier to operate from a compact low-voltage source without requiring a higher-voltage analog rail. Its programmable gain reduces the need for a separate gain-control stage, while the 800 kHz bandwidth handles time-varying sensor content. Designers should still examine quiescent current, input common-mode limits, and whether the sensor output can remain inside the allowed range throughout the battery discharge cycle.
推荐
Current Sensing and Power Monitoring
The AD623BRZ can amplify the differential voltage produced by a current-sense network when the monitored voltage is small relative to its common-mode level. Its differential architecture helps reject supply excursions and switching noise that would affect both sense inputs equally. With programmable gain up to 25 and approximately 800 kHz bandwidth, it can support telemetry, protection, and power-flow measurements. The input network must keep the common-mode voltage within the instrumentation amplifier's operating limits, and the shunt, filtering, Kelvin routing, and output reference should be designed to avoid introducing errors outside the AD623's measurement range.
推荐
Biomedical and Physiological Sensing
The AD623BRZ can condition low-level differential bioelectric or resistive sensor signals when the application requires common-mode rejection and a compact analog front end. The 2.7 V minimum supply supports portable instruments, and programmable gain up to 25 allows the analog signal chain to be scaled before digitization. The rail-to-rail output helps preserve dynamic range in low-voltage systems. Biomedical designs require additional consideration of patient protection, input bias currents, electrode impedance, leakage, noise, and applicable medical requirements that are outside the basic electrical specification of the amplifier.
推荐
Industrial Process Monitoring
The AD623BRZ is suitable for industrial process monitoring when a transducer produces a small differential signal over a larger common-mode voltage. Its 800 kHz bandwidth can capture process transients, while the 2.7 V to 12 V supply range supports both portable test equipment and embedded industrial electronics. The rail-to-rail output is helpful when the downstream converter has a limited input range. A robust implementation should include surge and transient protection at the field-wired input, shielded or differential signal routing, filtering matched to the measurement bandwidth, and a verified reference connection to control output offset.
推荐
推荐产品汇总
工程参考数据: AD623BRZ ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | AD623ARZ | AD623BR |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | SOIC-8 | SOIC-8 - same | SOIC-8 - same |
| Product Type | Instrumentation amplifier | Instrumentation amplifier | Instrumentation amplifier |
| Number of Circuits | 1 circuit | 1 circuit | 1 circuit |
| Supply Voltage Range | 2.7 V to 12 V | 2.7 V to 12 V | 2.7 V to 12 V |
| Maximum Gain | 25 | 25 | 25 |
| Output Swing | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Gain Programming | Single external gain-set resistor | Single external gain-set resistor | Single external gain-set resistor |
关键差异点
- Rail-to-rail output in a low-voltage instrumentation amplifier (对比 AD623ARZ)
- Programmable gain supports flexible analog signal scaling (对比 AD623ARZ)
- Broad signal bandwidth for dynamic measurements (对比 AD623BR)
- Single-supply compatibility for portable systems (对比 AD623ARZ)
设计说明
Route the two differential inputs as a closely matched pair and connect the gain-set resistor directly to the corresponding AD623BRZ pin. Keep input traces away from switching nodes, relay contacts, inductors, and the return path of high-current outputs. Place the supply bypass capacitor beside the device and use a ground plane that provides a low-impedance return for both input and output currents. Good symmetry and short sensitive paths reduce conversion of common-mode noise into differential error.
Estimated: use P_dissipation ≈ (VIN − VOUT) × IOUT plus internal losses to evaluate the AD623BRZ thermal design. For example, a 5 V input, 2.5 V output, and 10 mA load produces approximately 25 mW from the voltage difference before internal losses. Compare the total estimated dissipation with the package thermal data for the actual PCB copper area and ambient temperature. Lower the output or input voltage when possible because linear-regulator dissipation increases directly with voltage drop.
Set the input and output filtering bandwidth deliberately rather than assuming the full 800 kHz amplifier bandwidth is useful. Sensor cables can introduce large common-mode transients, so confirm that every input remains within the allowed common-mode range under worst-case conditions. Add protection or filtering ahead of the amplifier when necessary, but account for the added noise and phase behavior. Verify gain accuracy at the signal frequencies of interest using the manufacturer gain and frequency-response data.
Do not select the AD623BRZ solely by its supply range and bandwidth. Input common-mode voltage, output swing, gain accuracy, input bias current, offset voltage, and temperature behavior determine measurement performance. Likewise, do not substitute a reel or tape-and-reel order code when the function requires a different electrical variant. Compare the exact orderable part number against the Analog Devices datasheet and pin description before approving a replacement.
合规信息
Compliance attributes require confirmation from the current Analog Devices product documentation or manufacturer declarations.