Analog Devices

AD510KH/+ - Precision Laser-Trimmed Instrumentation Op Amp

料号: AD510KH/+ ✓ 量产中
15 V Vdss 8-lead SOIC Package
最小起订量: 1 |

AD510KH/+ 概述

The Analog Devices AD510KH/+ is a low-cost, laser-trimmed precision operational amplifier designed for instrumentation, buffer, and low-level signal-conditioning applications. The AD510 family combines a precision amplifier core with trim calibration that supports repeatable DC performance in measurement systems. A 15 V integrated-circuit rating is identified for the AD510KH, while the device operates from a single positive supply or a split supply according to the manufacturer application guidance.

An operational amplifier, or op amp, is a high-gain differential amplifier that uses external feedback to control gain and bandwidth. It belongs to the linear amplifier hierarchy, which includes instrumentation amplifiers, buffer amplifiers, comparators, and voltage-feedback amplifiers. In a typical signal chain, the AD510KH/+ can amplify a sensor output, buffer a high-impedance source, or drive an analog-to-digital converter input when its input range, output swing, and stability behavior match the circuit requirements.

The AD510KH/+ is described by Analog Devices as a low-cost, laser-trimmed precision IC op amp. Laser trimming is significant because it allows the manufacturer to calibrate offset-related behavior during production, improving matching between devices and reducing the need for external offset adjustment in cost-sensitive precision circuits. The family is intended for instrumentation and buffering rather than high-speed signal processing.

The AD510KH designation identifies a specific ordering variant of the AD510 family, while the /+ suffix denotes the manufacturer's standard commercial product-ordering convention. Package, electrical limits, temperature range, and exact pin arrangement should be confirmed against the AD510 datasheet before a new PCB is released or an existing design is reworked.

Typical uses include precision bridge and sensor interfaces, instrumentation signal conditioning, analog measurement modules, and low-frequency buffer stages. In these applications, offset stability, low bias current behavior, and noise performance are more important than wideband slew rate. A practical design should verify input common-mode range at both supply rails and confirm output swing for the selected gain and load.

Keep sensitive input and feedback nodes away from switching-current paths and provide a stable reference or low-level input source through appropriate filtering. Decoupling capacitors should be placed directly across the supply pins, and the unused inputs must be tied to a defined common-mode potential rather than left floating.

This page combines the AD510KH/+ family description with sourcing guidance, same-footprint replacement analysis, application-focused engineering notes, and a parameter comparison covering alternatives that use the same 8-lead SOIC footprint. These resources help engineers evaluate the amplifier before requesting a quote or committing it to a prototype.

直接替换替代料: AD510KH/+ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: AD510KH/+ (相同外形与封装尺寸) ——差异在于 Mounting Type, Product Type.

Analog Devices
Mounting Type: Through Hole
Product Type: Operational Amplifier (Op Amp)

AD510SH

✅ 直接替换 ⚠️ 规格未核验
Analog Devices
📦 8-lead SOIC
Analog Devices · Operational Amplifier (Op Amp) · General Purpose Precision · 1 · 0.3 MHz · 250000 · 100 dB

联系询价

查看数据手册 →

AD510JH/+

✅ 直接替换 ⚠️ 规格未核验
📦 8-lead SOIC
Identical 8-of-8 SOIC lead count and AD510 family connection scheme; the JH ordering suffix changes grade coverage

📋 参考替代料(不在目录中)

AD510AHZ

✅ 直接替换 ⚠️ 规格未核验
📦 8-lead SOIC
Identical 8-of-8 SOIC lead count and AD510 family connection scheme; the AHZ ordering suffix changes grade and temperature coverage

📋 参考替代料(不在目录中)

AD510KH/+ 最大额定值与电气特性

Product Type Precision operational amplifier
Amplifier Category Instrumentation, buffer amplifier
Trim Method Laser trimmed
Cost Position Low cost
Integrated Circuit Voltage Class 15 V
封装 8-lead SOIC
安装类型 Surface mount

AD510KH/+ 引脚配置

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
引脚 1 NC — Not connected (per datasheet)
引脚 2 -IN — Inverting input
引脚 3 +IN — Non-inverting input
引脚 4 V- — Negative supply or ground connection
引脚 5 NC — Not connected (per datasheet)
引脚 6 OUT — Analog output
引脚 7 V+ — Positive supply connection
引脚 8 NC — Not connected (per datasheet)

典型应用

AD510KH/+ 适用于 6 应用s: Precision Sensor Signal Conditioning, Instrumentation Buffer Stage, Industrial Process Measurement, Low-Level Analog Measurement, Analog Sensor Interface, Audio and Communication Buffering.

🏭

Precision Sensor Signal Conditioning

The AD510KH/+ suits low-level sensor interfaces where a trimmed precision amplifier must operate close to the signal source. Its laser-trimmed AD510 family construction targets repeatable DC behavior, making it useful for conditioning resistive-bridge, resistance, or temperature-sensor outputs before conversion by an ADC. Place the amplifier close to the sensor to minimize parasitic capacitance and leakage on high-impedance nodes, then verify input bias current against the smallest signal of interest. The critical trade-off is that precision DC performance does not imply high bandwidth, so the operating gain must remain within the stability and noise limits shown in the manufacturer datasheet.

📡

Instrumentation Buffer Stage

The AD510KH/+ can provide the impedance isolation needed between a high-impedance sensor and a following measurement or conversion stage. Because the AD510 family is laser trimmed for precision, the amplifier is appropriate when offset behavior matters more than wideband performance. Use the amplifier in a unity-gain follower when a high input impedance is the primary requirement, and keep the feedback connection extremely short to avoid added phase shift. Confirm output settling and capacitive-load behavior in the AD510 datasheet, particularly when the source includes long cables or sensor cables.

🏭

Industrial Process Measurement

Industrial process-control boards can use the AD510KH/+ to amplify the millivolt-level output of a bridge or transducer before it reaches an ADC or comparator. The trimmed AD510 family is attractive where repeated calibration and predictable DC offset are important in a measurement path. Place the amplifier and its input network close to the field interface, isolate high-current switching paths from the input, and include filtering only after determining the required measurement bandwidth. Validate the common-mode range at the actual sensor excitation level because the usable signal range, rather than the package rating alone, determines whether the amplifier remains accurate.

🔧

Low-Level Analog Measurement

The AD510KH/+ is appropriate for laboratory-style analog measurement circuits that amplify a low-level DC signal and preserve its relationship to a known reference. Laser trimming supports repeatable behavior between channels, which is useful in multi-channel measurement systems. Use a precision reference with a low-noise supply and verify that the amplifier input remains within its common-mode range at both power-up and overload conditions. Because the AD510 family prioritizes precision rather than high speed, avoid using it where the signal contains significant high-frequency content unless the closed-loop response is verified.

🧩

Analog Sensor Interface

A resistive or capacitive sensor can be followed by the AD510KH/+ when the interface requires gain rather than only isolation. The amplifier's laser-trimmed precision supports consistent DC operation across a bank of identical sensor channels. Design the feedback network around the required gain, keep the sensor node physically compact, and account for input bias current when the source impedance is high. Where the sensor output can exceed the amplifier's input range during fault conditions, add input clamping or protection rather than relying on the op amp's absolute maximum ratings.

🎧

Audio and Communication Buffering

The AD510KH/+ can buffer a low-frequency audio or communication signal when the design needs impedance isolation rather than headphone-drive capability. Its precision-trimmed character helps preserve small signals, but the application must remain inside the amplifier's bandwidth, slew-rate, output-swing, and output-current ratings. Place a small isolation resistor at the output when driving a cable or capacitive input, and test the complete load because stability behavior can differ from a resistive bench load. For wideband audio, microphone preamplification, or direct speaker drive, use an amplifier explicitly specified for those duties.

What is the AD510KH/+ used for?
The AD510KH/+ is a low-cost, laser-trimmed precision op amp for instrumentation, buffer, and low-level signal-conditioning applications. Analog Devices identifies the AD510 family as a precision IC operational amplifier intended for measurement systems where offset behavior and low-level signal integrity are more important than high-speed performance. A typical circuit uses it as a sensor amplifier, an impedance buffer, or the input stage of an analog measurement chain.
Where can I download the AD510KH/+ datasheet PDF?
The AD510KH/+ datasheet is available through the Analog Devices AD510 documentation and the AD510KH datasheet page linked on this page. Download the manufacturer document and confirm the ordering-code table, 8-lead SOIC pin configuration, recommended operating conditions, absolute maximum ratings, and electrical characteristics before layout release. The /+ ordering suffix should be checked against the package and temperature-grade markings selected for the design.
Where can I find the AD510KH/+ pinout?
The AD510KH/+ uses an 8-lead SOIC pin arrangement. For board-layout work, use the pin-description table and land pattern in the manufacturer datasheet rather than relying on the generic package drawing. The functional connections are the two analog inputs, the output, the positive and negative supply pins, and the remaining no-connect positions. Confirm every signal assignment against the exact AD510 variant before fabrication.
Is the AD510KH/+ pin-compatible with the standard AD510?
The AD510KH/+ is an ordering variant within the Analog Devices AD510 family and uses the same 8-lead SOIC package as the standard AD510 family ordering code. For a physical replacement, compare the family-level pinout and the temperature-grade or qualification requirements of the specific ordering code. The AD510 family is therefore the closest same-manufacturer starting point, but the exact suffix and operating-temperature coverage must be verified before substitution.
What is the difference between AD510KH/+ and AD510JH/+?
AD510KH/+ and AD510JH/+ are ordering variants of the same Analog Devices AD510 precision amplifier family. Both use the 8-lead SOIC footprint, so their physical placement is interchangeable after the pin functions are verified. The meaningful selection point is the ordering-code temperature or grade designation associated with each suffix. Choose the variant whose temperature coverage and qualification requirements match the target application.
Can the AD510KH/+ replace an AD510AHZ?
The AD510KH/+ can be considered a physical starting point for an AD510AHZ substitution because both belong to the AD510 family and use an 8-lead SOIC package. Pin compatibility establishes mechanical and electrical connection compatibility, but it does not by itself establish equivalent temperature grading or lifecycle requirements. Confirm the exact ordering codes, absolute maximum ratings, and operating-temperature ranges in the manufacturer datasheet before releasing the change.
What is the best drop-in replacement for AD510KH/+?
The best drop-in approach is to start with another Analog Devices AD510 family ordering code in the same 8-lead SOIC footprint, such as AD510 or AD510JH/+, and then verify the temperature grade and electrical limits. Cross-brand substitutes are less certain because the cross-reference results do not identify a specific pin-compatible competitor. For a cross-brand change, validate offset, bias current, noise, common-mode range, output swing, and stability on the final board.
When should I choose AD510KH/+ instead of AD510JH/+?
Choose AD510KH/+ when its ordering-code temperature grade matches the product's environmental requirements and AD510JH/+ does not. Both parts use the same 8-lead SOIC footprint and serve precision instrumentation or buffering roles, so the selection normally turns on grade, temperature coverage, qualification, and availability rather than PCB redesign. Use the manufacturer ordering table to confirm the meaning of each suffix for the required temperature range.
Is the AD510KH/+ suitable for sensor signal conditioning?
The AD510KH/+ is suitable for many low-level sensor signal-conditioning applications because the AD510 family is laser trimmed for precision DC behavior. It can amplify or buffer outputs from resistive bridges, temperature sensors, and other high-impedance sources when the common-mode range, offset performance, and output swing satisfy the circuit. Check the sensor excitation range and the amplifier input bias current against the final signal amplitude.
Is the AD510KH/+ suitable for audio applications?
The AD510KH/+ can be used in low-frequency audio buffer or gain stages, but it is primarily positioned as a precision instrumentation amplifier rather than a high-performance audio part. Confirm noise, slew rate, output-current capability, and output-swing requirements for the intended audio path. For headphone drive, microphone preamplification, or wideband audio, select an amplifier whose specified bandwidth and drive capability match those loads.
How should the AD510KH/+ be decoupled and laid out?
Place the supply bypass capacitors immediately across the positive and negative supply pins, with a short ground return and the shortest practical input and feedback routes. Keep the unused input connected to a defined common-mode voltage instead of allowing it to float. Avoid routing sensitive amplifier nodes beneath or beside switching-current paths, and follow the manufacturer layout guidance in the AD510 datasheet for the final board.
Does the AD510KH/+ need an output isolation resistor?
The AD510KH/+ may benefit from a small series output resistor when driving a capacitive load or isolating an external cable. The correct value depends on the gain, load capacitance, stability behavior, and acceptable transient response, all of which must be taken from the application guidance. Start by following the manufacturer stability and capacitive-load recommendations rather than adding an arbitrary value.
How do I prevent offset error in an AD510KH/+ amplifier stage?
Minimize offset error by keeping the input common-mode voltage within the amplifier's operating range, matching source impedances at the two inputs, and using the laser-trimmed AD510 family for precision DC measurements. Bias-current compensation resistors can help when source impedances are known and unequal. Keep copper leakage, contamination, and surface leakage under control on high-impedance instrumentation boards.
Is the AD510KH/+ in stock and what is its lead time?
Current stock and lead time should be confirmed through the Request a Quote form on this page. The part is listed as in stock by a distributor listing, but inventory can change quickly and may be allocated against open orders. Submit the required quantity, target package variant, and delivery location with your request so current availability and scheduling can be confirmed against your production plan.
What are the key specifications of AD510KH/+ that engineers should know?
The AD510KH/+ is a low-cost, laser-trimmed precision operational amplifier from Analog Devices, identified for instrumentation and buffer-amplifier use and associated with a 15 V integrated-circuit class. Its most important characteristics are precision DC behavior, supply capability, offset voltage, bias current, noise, common-mode range, and stability. Use the exact AD510 datasheet limits for each ordering code when sizing the circuit.
What Analog Devices equivalent should I consider for the AD510KH/+?
The closest same-manufacturer equivalents are other AD510 family ordering codes, including AD510 and AD510JH/+, because they retain the 8-lead SOIC footprint and precision-amplifier function. The available cross-reference search does not identify a verified cross-brand drop-in equivalent, so a competitor part should not be treated as interchangeable without a detailed pin, electrical, and stability comparison. Request a quote for the AD510KH/+ here when the original device is preferred.

工程参考数据: AD510KH/+ ——对比、设计指导和合规信息。

选型指南

Choose the AD510KH/+ when a low-cost, laser-trimmed precision amplifier is needed for low-level instrumentation or buffering and the AD510KH ordering grade matches the product's temperature requirements. AD510, AD510JH/+, and AD510AHZ are same-family alternatives that preserve the 8-lead SOIC footprint, making them practical starting points when a different ordering-code grade is required. Review the offset voltage, bias current, common-mode range, noise, gain-bandwidth product, and output-drive limits before changing the part number. For a cross-brand replacement, require a documented pin-for-pin comparison and bench validation; none of the listed same-brand parts requires a PCB change. If the circuit requires high bandwidth, rail-to-rail operation, or an integrated instrumentation amplifier, select a different device family rather than relying on package similarity alone.

与替代料对比

参数 本产品 AD510 AD510JH/+ AD510AHZ
Package 8-lead SOIC 8-lead SOIC 8-lead SOIC 8-lead SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Product Family AD510 precision operational amplifier AD510 precision operational amplifier AD510 precision operational amplifier AD510 precision operational amplifier
Amplifier Type Single precision op amp Single precision op amp Single precision op amp Single precision op amp
Primary Application Instrumentation and buffer amplification Instrumentation and buffer amplification Instrumentation and buffer amplification Instrumentation and buffer amplification

关键差异点

  • Laser-trimmed precision within a cost-conscious AD510 family (对比 AD510)
  • Same-footprint ordering flexibility within one manufacturer family (对比 AD510JH/+)
  • Instrumentation-oriented precision amplifier positioning (对比 AD510AHZ)

设计说明

Keep the non-inverting input, inverting input, and feedback components close together and away from switching-current paths. For high-impedance sensors, minimize leakage-producing contamination and guard the input node when practical. Place the supply bypass capacitors directly across pins 4 and 7, with short ground returns, and verify the complete board for unwanted antiresonant coupling rather than relying only on schematic-level values.

Do not allow either input to exceed the amplifier's specified common-mode range during startup, sensor faults, or supply transients. Tie the unused input to a defined common-mode voltage with a short, low-impedance path. When driving a capacitive load, follow the manufacturer's stability guidance and consider a small isolation resistor; adding a resistor without checking the required gain-bandwidth interaction can introduce unexpected settling behavior.

The AD510KH/+ is a precision low-level amplifier rather than a wideband driver. Filter noise at the source when possible, and keep the closed-loop bandwidth low enough to preserve the phase margin required by the datasheet. For bridge sensors, use matched input impedances and consider bias-current compensation to reduce offset generated by source resistance. Validate the finished channel with the real sensor and cable rather than with only a low-noise laboratory source.

Use a supply arrangement that keeps the amplifier within its absolute maximum and recommended operating limits, including during power-up and shutdown. The 15 V integrated-circuit class does not by itself establish the usable single-supply range. Place local decoupling at the device, keep return-current paths controlled, and verify supply noise at the amplifier pins because supply ripple can be multiplied by the closed-loop gain even when the device is described as low cost and laser trimmed.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The AD510KH/+ is a commercial instrumentation amplifier rather than an automotive-qualified device. Compliance statements require confirmation from the current Analog Devices product documentation and material declarations.

数据核验日期: 2026-11-14 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

AD510KH/+ datasheet AD510KH/+ pinout AD510KH/+ specifications AD510KH/+ price AD510KH/+ replacement AD510KH/+ equivalent AD510KH/+ SOIC-8 footprint AD510 precision op amp AD510 laser trimmed amplifier AD510KH/+ instrumentation application AD510KH/+ vs AD510JH/+ AD510KH/+ drop-in substitute

相关元器件 & 术语

Analog Devices AD510KH/+ AD510 AD510JH/+ AD510AHZ precision operational amplifier instrumentation amplifier buffer amplifier voltage-feedback amplifier low-dropout laser trimming input offset voltage input bias current common-mode input range gain bandwidth product 8-lead SOIC SOIC package family surface mount SMD RoHS REACH sensor signal conditioning bridge measurement industrial process control
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情