AD8012ARZ - 350 MHz Dual Current-Feedback Amplifier | Analog Devices
料号: AD8012ARZ ✓ 量产中AD8012ARZ 概述
A current-feedback amplifier is a voltage-input operational-amplifier architecture that uses feedback impedance to establish gain. Unlike a conventional voltage-feedback amplifier, whose bandwidth normally falls as closed-loop gain increases, a current-feedback amplifier maintains high bandwidth across a broader range of feedback resistors. This makes the AD8012 suitable for high-speed buffers, video paths, instrumentation, and communications equipment where signal bandwidth must remain high without the power consumption of a much larger amplifier.
The AD8012ARZ provides 350 MHz small-signal bandwidth, 20 ns settling performance, and 1.7 mA supply current per amplifier. Its 1.5 mV typical offset supports accurate signal conditioning at low-level inputs. Video performance is characterized by 0.02% differential gain and 0.06 degree differential phase, making the device suitable for frequency-dependent video systems and test equipment. The dual configuration also permits two independent channels in one package.
Because it is a current-feedback amplifier, the feedback resistor value directly influences gain, bandwidth, and stability. Designs should follow the manufacturer guidance for the selected gain and include short feedback paths to minimize parasitic capacitance. The SOIC-8 package offers a conventional surface-mount footprint, but exposed-pad thermal relief is not required because this is a low-power amplifier rather than a high-dissipation power device.
Typical applications include high-speed video buffering, low-power portable instrumentation, communications interfaces, general-purpose signal conditioning, and wideband analog measurement systems. It is particularly useful when a design requires high bandwidth but cannot accommodate the higher supply current typical of high-speed operational amplifiers operating at greater voltage amplitudes.
The primary design trade-off is low power versus output-current capability and large-signal headroom. Confirm the required output swing, load impedance, gain, feedback resistor, and operating voltage against the manufacturer specifications before implementation. This page also organizes package, application, and replacement information for faster engineering evaluation.
This page synthesizes the AD8012ARZ product identity, frequency-domain attributes, application guidance, and practical pin and layout considerations into one engineering-focused reference. It also identifies documented ordering alternatives while distinguishing electrically equivalent order codes from genuinely different amplifier designs.
直接替换替代料: AD8012ARZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
AD8012AR
✅ 直接替换📋 参考替代料(不在目录中)
AD8012AR-REEL7
✅ 直接替换📋 参考替代料(不在目录中)
AD8012ARZ-REEL7
✅ 直接替换📋 参考替代料(不在目录中)
AD8012ARZ 最大额定值与电气特性
| Number of Channels | 2 channels |
| Amplifier Type | Current-feedback operational amplifier |
| Small-Signal Bandwidth | 350 MHz |
| Supply Current per Amplifier | 1.7 mA |
| Settling Time | 20 ns |
| Typical Input Offset Voltage | 1.5 mV |
| Differential Gain | 0.02% |
| Differential Phase | 0.06 degree |
| Supply Voltage Range | +/-6 V to +/-12 V |
| 封装 | 8-pin SOIC |
| 安装类型 | Surface mount |
| Lead-Free Status | Lead-free package option |
| RoHS Compliance | ROHS3 compliant |
| REACH Status | REACH unaffected |
| Moisture Sensitivity Level | MSL 1 (unlimited floor life) |
AD8012ARZ 8-pin soic 引脚配置指南
AD8012ARZ(8-pin soic 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: AD8012ARZ.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AD8012ARZ 适用于 6 应用s: High-Speed Video Buffering, Low-Power Portable Instrumentation, Communications Signal Conditioning, Wideband Analog Measurement, General-Purpose High-Speed Buffer, Industrial Control Signal Interface.
High-Speed Video Buffering
The AD8012ARZ fits video buffering because it combines 350 MHz bandwidth with 0.02% differential gain and 0.06 degree differential phase. Two independent current-feedback channels can buffer complementary or independent signals within one 8-pin SOIC. Place the device near the source and destination to keep traces short, then select the feedback resistor using the manufacturer gain guidance. This configuration preserves wideband video fidelity without the higher supply current associated with many high-speed amplifiers.
推荐
Low-Power Portable Instrumentation
The AD8012ARZ is useful in portable instrumentation because each amplifier consumes 1.7 mA while retaining 350 MHz bandwidth. The dual SOIC-8 package provides two channels for sensor buffering, gain adjustment, or signal isolation without requiring separate devices. Its 1.5 mV typical offset supports low-level conditioning, while the fast 20 ns settling characteristic helps preserve short measurement windows. Battery-powered designs should still verify total system supply current because input bias, feedback-network current, and external circuitry contribute beyond the amplifier rating.
推荐
Communications Signal Conditioning
The AD8012ARZ can condition high-bandwidth communications signals when low power is more important than high output-current capability. Its current-feedback architecture supports wide bandwidth at elevated closed-loop gain, while dual channels allow separate transmit or receive paths in one package. Keep feedback traces compact and use controlled impedance routing for high-frequency nets. Before deployment, confirm that the required output voltage swing and load impedance remain suitable for the low-power amplifier and its ±6 V or ±12 V operating arrangements.
推荐
Wideband Analog Measurement
The AD8012ARZ suits wideband analog measurement systems that need rapid settling and low amplifier power. A 350 MHz bandwidth handles high-frequency test signals, and the 20 ns settling specification supports measurements that cannot tolerate prolonged output transients. The dual-channel arrangement can compare a reference path with a sensed path or provide differential conditioning functions. Select the feedback network for the exact closed-loop gain and confirm source impedance, output loading, and permissible output swing against the manufacturer specifications.
推荐
General-Purpose High-Speed Buffer
The AD8012ARZ serves as a general-purpose high-speed buffer when a source needs isolation or level conditioning across a broad bandwidth. Unlike a conventional voltage-feedback amplifier, its current-feedback topology maintains strong bandwidth performance as gain increases, subject to the recommended feedback impedance. Use two channels for separate buffer functions in the same SOIC-8 footprint. Keep input and feedback routes short to minimize parasitic feedback, and verify ringing, stability, and output swing on the completed layout.
推荐
Industrial Control Signal Interface
The AD8012ARZ can interface high-speed control and monitoring signals in industrial systems where the amplifier must combine bandwidth with low supply current. Its dual channels can process two related signals, while 350 MHz bandwidth is well above the bandwidth required by many slow industrial loops but supports edge-fast diagnostics and isolated signal-conditioning stages. Place the amplifier near the protected signal entry point to reduce noise pickup. Confirm the industrial voltage range, common-mode behavior, output swing, and long-term reliability requirements before integrating it into safety-related circuitry.
推荐
工程参考数据: AD8012ARZ ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | AD8012AR | AD8012AR-REEL7 | AD8012ARZ-REEL7 |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 8-pin SOIC | 8-pin SOIC - same | 8-pin SOIC - same | 8-pin SOIC - same |
| Number of Channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Amplifier Architecture | Current-feedback operational amplifier | Current-feedback operational amplifier | Current-feedback operational amplifier | Current-feedback operational amplifier |
| Bandwidth | 350 MHz | 350 MHz | 350 MHz | 350 MHz |
| Supply Current per Amplifier | 1.7 mA | 1.7 mA | 1.7 mA | 1.7 mA |
| Typical Offset Voltage | 1.5 mV | 1.5 mV | 1.5 mV | 1.5 mV |
| Settling Time | 20 ns | 20 ns | 20 ns | 20 ns |
| Differential Gain | 0.02% | 0.02% | 0.02% | 0.02% |
| Differential Phase | 0.06 degree | 0.06 degree | 0.06 degree | 0.06 degree |
关键差异点
- Combines very high bandwidth with exceptionally low per-channel supply current (对比 AD8012AR-REEL7)
- Uses a lead-free 8-pin SOIC ordering configuration (对比 AD8012AR)
- Provides two channels with strong video characteristics in one package (对比 AD8012ARZ-REEL7)
设计说明
Do not select the feedback resistor by treating the AD8012ARZ as a conventional voltage-feedback amplifier. Current-feedback gain depends strongly on the recommended feedback impedance and the source impedance. Use the manufacturer value for the intended closed-loop gain, preserve the specified resistor tolerance, and evaluate stability with the actual source and load. Incorrect feedback values can produce excessive bandwidth, peaking, or oscillation even when the amplifier has ample nominal bandwidth.
Keep the input, output, and feedback paths short and route them away from noisy digital and switching nodes. Place the feedback resistor close to the relevant amplifier output and input pins, and minimize parasitic capacitance around high-impedance nodes. The two channels share a common 8-pin SOIC package, so adequate input and output decoupling is important for maintaining low distortion and preventing one channel from coupling into the other.
Budget the complete dual-amplifier supply demand using the 1.7 mA per-amplifier specification, then add the current required by the feedback network and external circuitry. Because the AD8012ARZ is intended for +6 V to +12 V or -6 V to -12 V arrangements, verify rail polarity, bypass capacitance, and startup sequencing in the complete circuit. Low amplifier current does not eliminate supply-decoupling requirements.
合规信息
ROHS3 compliant, REACH unaffected, and MSL 1 (unlimited floor life) are stated for the AD8012ARZ. AEC-Q100 qualification, halogen-free status, and conflict-minerals status are not specified.