AD8012ARZ - 350 MHz Dual Current-Feedback Amplifier | Analog Devices
MPN: AD8012ARZ ✓ सक्रियAD8012ARZ अवलोकन
A current-feedback amplifier is a voltage-input operational-amplifier architecture that uses feedback impedance to establish gain. Unlike a conventional voltage-feedback amplifier, whose bandwidth normally falls as closed-loop gain increases, a current-feedback amplifier maintains high bandwidth across a broader range of feedback resistors. This makes the AD8012 suitable for high-speed buffers, video paths, instrumentation, and communications equipment where signal bandwidth must remain high without the power consumption of a much larger amplifier.
The AD8012ARZ provides 350 MHz small-signal bandwidth, 20 ns settling performance, and 1.7 mA supply current per amplifier. Its 1.5 mV typical offset supports accurate signal conditioning at low-level inputs. Video performance is characterized by 0.02% differential gain and 0.06 degree differential phase, making the device suitable for frequency-dependent video systems and test equipment. The dual configuration also permits two independent channels in one package.
Because it is a current-feedback amplifier, the feedback resistor value directly influences gain, bandwidth, and stability. Designs should follow the manufacturer guidance for the selected gain and include short feedback paths to minimize parasitic capacitance. The SOIC-8 package offers a conventional surface-mount footprint, but exposed-pad thermal relief is not required because this is a low-power amplifier rather than a high-dissipation power device.
Typical applications include high-speed video buffering, low-power portable instrumentation, communications interfaces, general-purpose signal conditioning, and wideband analog measurement systems. It is particularly useful when a design requires high bandwidth but cannot accommodate the higher supply current typical of high-speed operational amplifiers operating at greater voltage amplitudes.
The primary design trade-off is low power versus output-current capability and large-signal headroom. Confirm the required output swing, load impedance, gain, feedback resistor, and operating voltage against the manufacturer specifications before implementation. This page also organizes package, application, and replacement information for faster engineering evaluation.
This page synthesizes the AD8012ARZ product identity, frequency-domain attributes, application guidance, and practical pin and layout considerations into one engineering-focused reference. It also identifies documented ordering alternatives while distinguishing electrically equivalent order codes from genuinely different amplifier designs.
के लिए ड्रॉप-इन विकल्प AD8012ARZ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
AD8012AR
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
AD8012AR-REEL7
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
AD8012ARZ-REEL7
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
AD8012ARZ Maximum Ratings और Electrical Characteristics
| Number of Channels | 2 channels |
| Amplifier Type | Current-feedback operational amplifier |
| Small-Signal Bandwidth | 350 MHz |
| Supply Current per Amplifier | 1.7 mA |
| Settling Time | 20 ns |
| Typical Input Offset Voltage | 1.5 mV |
| Differential Gain | 0.02% |
| Differential Phase | 0.06 degree |
| Supply Voltage Range | +/-6 V to +/-12 V |
| पैकेज | 8-pin SOIC |
| माउंटिंग प्रकार | Surface mount |
| Lead-Free Status | Lead-free package option |
| RoHS Compliance | ROHS3 compliant |
| REACH Status | REACH unaffected |
| Moisture Sensitivity Level | MSL 1 (unlimited floor life) |
AD8012ARZ 8-pin soic पिन कॉन्फ़िगरेशन गाइड
AD8012ARZ (8-pin soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: AD8012ARZ.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
AD8012ARZ के लिए उपयुक्त है 6 अनुप्रयोगs: High-Speed Video Buffering, Low-Power Portable Instrumentation, Communications Signal Conditioning, Wideband Analog Measurement, General-Purpose High-Speed Buffer, Industrial Control Signal Interface.
High-Speed Video Buffering
The AD8012ARZ fits video buffering because it combines 350 MHz bandwidth with 0.02% differential gain and 0.06 degree differential phase. Two independent current-feedback channels can buffer complementary or independent signals within one 8-pin SOIC. Place the device near the source and destination to keep traces short, then select the feedback resistor using the manufacturer gain guidance. This configuration preserves wideband video fidelity without the higher supply current associated with many high-speed amplifiers.
अनुशंसित
Low-Power Portable Instrumentation
The AD8012ARZ is useful in portable instrumentation because each amplifier consumes 1.7 mA while retaining 350 MHz bandwidth. The dual SOIC-8 package provides two channels for sensor buffering, gain adjustment, or signal isolation without requiring separate devices. Its 1.5 mV typical offset supports low-level conditioning, while the fast 20 ns settling characteristic helps preserve short measurement windows. Battery-powered designs should still verify total system supply current because input bias, feedback-network current, and external circuitry contribute beyond the amplifier rating.
अनुशंसित
Communications Signal Conditioning
The AD8012ARZ can condition high-bandwidth communications signals when low power is more important than high output-current capability. Its current-feedback architecture supports wide bandwidth at elevated closed-loop gain, while dual channels allow separate transmit or receive paths in one package. Keep feedback traces compact and use controlled impedance routing for high-frequency nets. Before deployment, confirm that the required output voltage swing and load impedance remain suitable for the low-power amplifier and its ±6 V or ±12 V operating arrangements.
अनुशंसित
Wideband Analog Measurement
The AD8012ARZ suits wideband analog measurement systems that need rapid settling and low amplifier power. A 350 MHz bandwidth handles high-frequency test signals, and the 20 ns settling specification supports measurements that cannot tolerate prolonged output transients. The dual-channel arrangement can compare a reference path with a sensed path or provide differential conditioning functions. Select the feedback network for the exact closed-loop gain and confirm source impedance, output loading, and permissible output swing against the manufacturer specifications.
अनुशंसित
General-Purpose High-Speed Buffer
The AD8012ARZ serves as a general-purpose high-speed buffer when a source needs isolation or level conditioning across a broad bandwidth. Unlike a conventional voltage-feedback amplifier, its current-feedback topology maintains strong bandwidth performance as gain increases, subject to the recommended feedback impedance. Use two channels for separate buffer functions in the same SOIC-8 footprint. Keep input and feedback routes short to minimize parasitic feedback, and verify ringing, stability, and output swing on the completed layout.
अनुशंसित
Industrial Control Signal Interface
The AD8012ARZ can interface high-speed control and monitoring signals in industrial systems where the amplifier must combine bandwidth with low supply current. Its dual channels can process two related signals, while 350 MHz bandwidth is well above the bandwidth required by many slow industrial loops but supports edge-fast diagnostics and isolated signal-conditioning stages. Place the amplifier near the protected signal entry point to reduce noise pickup. Confirm the industrial voltage range, common-mode behavior, output swing, and long-term reliability requirements before integrating it into safety-related circuitry.
अनुशंसित
के लिए इंजीनियरिंग संदर्भ डेटा AD8012ARZ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | AD8012AR | AD8012AR-REEL7 | AD8012ARZ-REEL7 |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 8-pin SOIC | 8-pin SOIC - same | 8-pin SOIC - same | 8-pin SOIC - same |
| Number of Channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Amplifier Architecture | Current-feedback operational amplifier | Current-feedback operational amplifier | Current-feedback operational amplifier | Current-feedback operational amplifier |
| Bandwidth | 350 MHz | 350 MHz | 350 MHz | 350 MHz |
| Supply Current per Amplifier | 1.7 mA | 1.7 mA | 1.7 mA | 1.7 mA |
| Typical Offset Voltage | 1.5 mV | 1.5 mV | 1.5 mV | 1.5 mV |
| Settling Time | 20 ns | 20 ns | 20 ns | 20 ns |
| Differential Gain | 0.02% | 0.02% | 0.02% | 0.02% |
| Differential Phase | 0.06 degree | 0.06 degree | 0.06 degree | 0.06 degree |
मुख्य विशेषताएँ
- Combines very high bandwidth with exceptionally low per-channel supply current (बनामAD8012AR-REEL7)
- Uses a lead-free 8-pin SOIC ordering configuration (बनामAD8012AR)
- Provides two channels with strong video characteristics in one package (बनामAD8012ARZ-REEL7)
डिज़ाइन नोट्स
Do not select the feedback resistor by treating the AD8012ARZ as a conventional voltage-feedback amplifier. Current-feedback gain depends strongly on the recommended feedback impedance and the source impedance. Use the manufacturer value for the intended closed-loop gain, preserve the specified resistor tolerance, and evaluate stability with the actual source and load. Incorrect feedback values can produce excessive bandwidth, peaking, or oscillation even when the amplifier has ample nominal bandwidth.
Keep the input, output, and feedback paths short and route them away from noisy digital and switching nodes. Place the feedback resistor close to the relevant amplifier output and input pins, and minimize parasitic capacitance around high-impedance nodes. The two channels share a common 8-pin SOIC package, so adequate input and output decoupling is important for maintaining low distortion and preventing one channel from coupling into the other.
Budget the complete dual-amplifier supply demand using the 1.7 mA per-amplifier specification, then add the current required by the feedback network and external circuitry. Because the AD8012ARZ is intended for +6 V to +12 V or -6 V to -12 V arrangements, verify rail polarity, bypass capacitance, and startup sequencing in the complete circuit. Low amplifier current does not eliminate supply-decoupling requirements.
अनुपालन जानकारी
ROHS3 compliant, REACH unaffected, and MSL 1 (unlimited floor life) are stated for the AD8012ARZ. AEC-Q100 qualification, halogen-free status, and conflict-minerals status are not specified.