Analog Devices

AD8012ARZ - 350 MHz Dual Current-Feedback Amplifier | Analog Devices

MPN: AD8012ARZ ✓ Nakahanda
1.7 mA Vdss 8-pin SOIC Package
MOQ: 1 |

AD8012ARZ Ulas

The Analog Devices AD8012ARZ is a dual, low-power current-feedback operational amplifier delivering 350 MHz bandwidth while each amplifier consumes 1.7 mA of supply current. It is packaged in an 8-pin SOIC and is intended for high-frequency, wide-dynamic-range signal paths where low distortion, fast settling, and low power are important. The two amplifiers also provide a 1.5 mV typical offset and excellent video performance.

A current-feedback amplifier is a voltage-input operational-amplifier architecture that uses feedback impedance to establish gain. Unlike a conventional voltage-feedback amplifier, whose bandwidth normally falls as closed-loop gain increases, a current-feedback amplifier maintains high bandwidth across a broader range of feedback resistors. This makes the AD8012 suitable for high-speed buffers, video paths, instrumentation, and communications equipment where signal bandwidth must remain high without the power consumption of a much larger amplifier.

The AD8012ARZ provides 350 MHz small-signal bandwidth, 20 ns settling performance, and 1.7 mA supply current per amplifier. Its 1.5 mV typical offset supports accurate signal conditioning at low-level inputs. Video performance is characterized by 0.02% differential gain and 0.06 degree differential phase, making the device suitable for frequency-dependent video systems and test equipment. The dual configuration also permits two independent channels in one package.

Because it is a current-feedback amplifier, the feedback resistor value directly influences gain, bandwidth, and stability. Designs should follow the manufacturer guidance for the selected gain and include short feedback paths to minimize parasitic capacitance. The SOIC-8 package offers a conventional surface-mount footprint, but exposed-pad thermal relief is not required because this is a low-power amplifier rather than a high-dissipation power device.

Typical applications include high-speed video buffering, low-power portable instrumentation, communications interfaces, general-purpose signal conditioning, and wideband analog measurement systems. It is particularly useful when a design requires high bandwidth but cannot accommodate the higher supply current typical of high-speed operational amplifiers operating at greater voltage amplitudes.

The primary design trade-off is low power versus output-current capability and large-signal headroom. Confirm the required output swing, load impedance, gain, feedback resistor, and operating voltage against the manufacturer specifications before implementation. This page also organizes package, application, and replacement information for faster engineering evaluation.

This page synthesizes the AD8012ARZ product identity, frequency-domain attributes, application guidance, and practical pin and layout considerations into one engineering-focused reference. It also identifies documented ordering alternatives while distinguishing electrically equivalent order codes from genuinely different amplifier designs.

Mga alternatibo na pwedeng ilagay na AD8012ARZ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

AD8012AR

✅ Drop-In
📦 8-pin SOIC
Same dual current-feedback architecture, 350 MHz bandwidth, and 8-pin SOIC footprint; the ordering suffix differs in lead-free configuration, with 0% difference in the cited bandwidth and current per amplifier.

📋 Alternatibo na Reference (hindi sa katalogo)

AD8012AR-REEL7

✅ Drop-In
📦 8-pin SOIC
Same die, 350 MHz bandwidth, and 8-pin SOIC pinout; the alternative changes order-code delivery attributes, with 0% difference in the cited bandwidth and current per amplifier.

📋 Alternatibo na Reference (hindi sa katalogo)

AD8012ARZ-REEL7

✅ Drop-In
📦 8-pin SOIC
Same die and 8-pin SOIC footprint as AD8012ARZ, with 350 MHz bandwidth and 1.7 mA per amplifier; only the reel order-code presentation differs.

📋 Alternatibo na Reference (hindi sa katalogo)

AD8012ARZ Mga Pinakamataas na Rating at Electrical Characteristics

Number of Channels 2 channels
Amplifier Type Current-feedback operational amplifier
Small-Signal Bandwidth 350 MHz
Supply Current per Amplifier 1.7 mA
Settling Time 20 ns
Typical Input Offset Voltage 1.5 mV
Differential Gain 0.02%
Differential Phase 0.06 degree
Supply Voltage Range +/-6 V to +/-12 V
Packhaging 8-pin SOIC
Uri ng Pagpapasok Surface mount
Lead-Free Status Lead-free package option
RoHS Compliance ROHS3 compliant
REACH Status REACH unaffected
Moisture Sensitivity Level MSL 1 (unlimited floor life)

Gabay sa Pin Configuration ng AD8012ARZ 8-pin soic

Pin configuration para sa AD8012ARZ (8-pin soic package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 8-pin soic package para sa AD8012ARZ

Wala ng detalyadong pinout data na magagamit para sa AD8012ARZ.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

AD8012ARZ ay nararapat para sa 6 aplikasyons: High-Speed Video Buffering, Low-Power Portable Instrumentation, Communications Signal Conditioning, Wideband Analog Measurement, General-Purpose High-Speed Buffer, Industrial Control Signal Interface.

📺

High-Speed Video Buffering

The AD8012ARZ fits video buffering because it combines 350 MHz bandwidth with 0.02% differential gain and 0.06 degree differential phase. Two independent current-feedback channels can buffer complementary or independent signals within one 8-pin SOIC. Place the device near the source and destination to keep traces short, then select the feedback resistor using the manufacturer gain guidance. This configuration preserves wideband video fidelity without the higher supply current associated with many high-speed amplifiers.

🧩

Low-Power Portable Instrumentation

The AD8012ARZ is useful in portable instrumentation because each amplifier consumes 1.7 mA while retaining 350 MHz bandwidth. The dual SOIC-8 package provides two channels for sensor buffering, gain adjustment, or signal isolation without requiring separate devices. Its 1.5 mV typical offset supports low-level conditioning, while the fast 20 ns settling characteristic helps preserve short measurement windows. Battery-powered designs should still verify total system supply current because input bias, feedback-network current, and external circuitry contribute beyond the amplifier rating.

🌐

Communications Signal Conditioning

The AD8012ARZ can condition high-bandwidth communications signals when low power is more important than high output-current capability. Its current-feedback architecture supports wide bandwidth at elevated closed-loop gain, while dual channels allow separate transmit or receive paths in one package. Keep feedback traces compact and use controlled impedance routing for high-frequency nets. Before deployment, confirm that the required output voltage swing and load impedance remain suitable for the low-power amplifier and its ±6 V or ±12 V operating arrangements.

📡

Wideband Analog Measurement

The AD8012ARZ suits wideband analog measurement systems that need rapid settling and low amplifier power. A 350 MHz bandwidth handles high-frequency test signals, and the 20 ns settling specification supports measurements that cannot tolerate prolonged output transients. The dual-channel arrangement can compare a reference path with a sensed path or provide differential conditioning functions. Select the feedback network for the exact closed-loop gain and confirm source impedance, output loading, and permissible output swing against the manufacturer specifications.

🔧

General-Purpose High-Speed Buffer

The AD8012ARZ serves as a general-purpose high-speed buffer when a source needs isolation or level conditioning across a broad bandwidth. Unlike a conventional voltage-feedback amplifier, its current-feedback topology maintains strong bandwidth performance as gain increases, subject to the recommended feedback impedance. Use two channels for separate buffer functions in the same SOIC-8 footprint. Keep input and feedback routes short to minimize parasitic feedback, and verify ringing, stability, and output swing on the completed layout.

🏭

Industrial Control Signal Interface

The AD8012ARZ can interface high-speed control and monitoring signals in industrial systems where the amplifier must combine bandwidth with low supply current. Its dual channels can process two related signals, while 350 MHz bandwidth is well above the bandwidth required by many slow industrial loops but supports edge-fast diagnostics and isolated signal-conditioning stages. Place the amplifier near the protected signal entry point to reduce noise pickup. Confirm the industrial voltage range, common-mode behavior, output swing, and long-term reliability requirements before integrating it into safety-related circuitry.

What is the AD8012ARZ?
The AD8012ARZ is a dual, low-power current-feedback operational amplifier with 350 MHz bandwidth and 1.7 mA supply current per amplifier. It is housed in an 8-pin SOIC. According to the Analog Devices AD8012 product page, the device is intended for high-frequency, wide-dynamic-range systems where high speed, low distortion, and low power are required simultaneously.
What are the key specifications of AD8012ARZ that engineers should know?
The AD8012ARZ provides 350 MHz bandwidth, 20 ns settling, 1.5 mV typical offset, and 1.7 mA supply current per amplifier in an 8-pin SOIC. The Analog Devices product page also identifies 0.02% differential gain and 0.06 degree differential phase. Its principal advantage is the combination of high speed and low supply current in a dual surface-mount package.
What is the operating voltage of AD8012ARZ?
The AD8012ARZ is listed for operation from +6 V to +12 V or -6 V to -12 V, depending on the required bipolar supply arrangement. Its circuit family is a dual low-power current-feedback amplifier, and the device is packaged as an 8-pin SOIC. Confirm absolute maximum and recommended supply conditions in the manufacturer datasheet before applying a ±12 V rail.
Where can I download the AD8012ARZ datasheet PDF?
The official AD8012ARZ documentation is available through the Analog Devices AD8012 product page at https://www.analog.com/en/products/ad8012.html. That manufacturer page provides the device description, technical documentation, and ordering information for the 8-pin SOIC configuration. Use the AD8012ARZ ordering code when requesting the exact packaged part from an authorized purchasing channel.
Where is the AD8012ARZ pinout located?
The AD8012ARZ pinout is shown in the AD8012 manufacturer datasheet, which is linked from https://www.analog.com/en/products/ad8012.html. The part uses an 8-pin SOIC with two complete amplifier channels. Use the manufacturer pin-description table when assigning each amplifier's input, output, supply, and ground connections to PCB tracks.
Is AD8012ARZ suitable for video signal processing?
Yes, the AD8012ARZ is suitable for video signal processing because the Analog Devices product page specifies 0.02% differential gain and 0.06 degree differential phase. Its 350 MHz bandwidth and 20 ns settling behavior also support wideband video paths. The actual channel bandwidth should be checked against the selected feedback network and source and load impedances.
How does a current-feedback amplifier differ from a voltage-feedback amplifier?
A current-feedback amplifier uses feedback impedance to establish gain and generally maintains bandwidth more effectively as closed-loop gain increases. The AD8012ARZ is a current-feedback device with 350 MHz bandwidth. Its feedback resistor is therefore a key design parameter and should be selected using the manufacturer guidance for the required gain and target bandwidth.
What is the difference between AD8012ARZ and AD8012AR?
The AD8012AR and AD8012ARZ are versions of the same AD8012 dual current-feedback amplifier family in an 8-pin SOIC package. Their principal documented distinction is ordering and lead-free configuration rather than amplifier topology: the -RZ lead-free package option applies to AD8012ARZ. Review the ordering table to confirm the exact package and termination requirements before substitution.
Can AD8012ARZ replace AD8012AR-REEL7?
The AD8012ARZ can serve as an electrical and footprint-compatible alternative to AD8012AR-REEL7 because both identify the AD8012 dual current-feedback amplifier in an 8-pin SOIC. Their order codes differ in lead-free and delivery format attributes. Confirm the required tape-and-reel presentation and inspect the manufacturer ordering information before authorizing a replacement.
When should I choose AD8012ARZ instead of a higher-current amplifier?
Choose the AD8012ARZ when a signal path requires 350 MHz bandwidth, fast settling, and low power, particularly with source impedances that do not demand substantial output current. Each amplifier consumes only 1.7 mA. If the design requires large voltage swings into low-impedance loads, verify the required output-current and headroom specifications before using this low-power device.
What can replace AD8012ARZ on the same SOIC-8 PCB?
The closest documented alternatives are AD8012AR, AD8012AR-REEL7, and AD8012ARZ-REEL7, all of which use the 8-pin SOIC AD8012 configuration and can be considered order-code alternatives where their lead-free and delivery attributes meet the design requirements. No cross-brand drop-in equivalent was established from the available manufacturer and comparison information. Validate the exact ordering suffix before PCB assembly.
What is the best Analog Devices equivalent for AD8012ARZ?
The best documented Analog Devices equivalent is the AD8012 family in an 8-pin SOIC, including AD8012AR and the AD8012AR-REEL7 ordering form. These alternatives preserve the dual current-feedback architecture and SOIC-8 footprint, but they can differ in lead-free status or delivery format. There is no substantiated cross-brand replacement to recommend without a complete pin and parameter review.
Is AD8012ARZ the same as AD8012ARZ-REEL7?
The AD8012ARZ and AD8012ARZ-REEL7 refer to the same lead-free AD8012 dual current-feedback amplifier in an 8-pin SOIC, but the order codes indicate different delivery presentations. The comparison information identifies them as the same die and an identical 8-lead SOIC package. Use the reel order code when automated pick-and-place supply requires tape-and-reel packaging.
Where can I buy AD8012ARZ and check its lead time?
Use the Request a Quote form on this XAIPART page to request AD8012ARZ pricing, stock confirmation, and current lead time. Commercial availability can change with order quantity, package form, and manufacturing schedules. The request should state the required quantity and whether the order must use the tube or tape-and-reel ordering presentation.
How should feedback resistors be selected for AD8012ARZ?
Select the AD8012ARZ feedback resistor using the manufacturer guidance for the intended closed-loop gain and bandwidth. Because the device uses current feedback, the resistor value is not interchangeable with a conventional voltage-feedback design. Keep the feedback path short and verify stability, gain accuracy, and output bandwidth in the final PCB layout.
Is AD8012ARZ RoHS compliant and suitable for lead-free assembly?
The AD8012ARZ is identified as ROHS3 compliant, REACH unaffected, and MSL 1 (unlimited floor life). The ordering information also describes AD8012ARZ as a lead-free package option. Production teams should still apply their standard solder-profile, moisture-handling, and traceable-assembly requirements to the complete component and packaging process.

Impormasyon ng Talumpati sa Engineering for AD8012ARZ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose AD8012ARZ when a design needs two high-speed current-feedback channels, approximately 350 MHz bandwidth, fast settling, and low supply current in an 8-pin SOIC. It is especially suitable for video, instrumentation, communications, and general signal-conditioning paths where amplifier power is constrained. AD8012AR is the closest ordering alternative when its lead-free configuration is acceptable, while AD8012AR-REEL7 and AD8012ARZ-REEL7 support automated production requirements through different order-code presentations. All three maintain the same SOIC footprint and core bandwidth. The alternatives do not provide extra output-current capability or a different compensation network. Before substitution, verify the exact lead-free status, delivery format, source impedance, recommended feedback resistor, required output swing, and operating temperature range. No cross-brand drop-in replacement was sufficiently established for a pin-to-pin recommendation.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto AD8012AR AD8012AR-REEL7 AD8012ARZ-REEL7
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 8-pin SOIC 8-pin SOIC - same 8-pin SOIC - same 8-pin SOIC - same
Number of Channels 2 channels 2 channels 2 channels 2 channels
Amplifier Architecture Current-feedback operational amplifier Current-feedback operational amplifier Current-feedback operational amplifier Current-feedback operational amplifier
Bandwidth 350 MHz 350 MHz 350 MHz 350 MHz
Supply Current per Amplifier 1.7 mA 1.7 mA 1.7 mA 1.7 mA
Typical Offset Voltage 1.5 mV 1.5 mV 1.5 mV 1.5 mV
Settling Time 20 ns 20 ns 20 ns 20 ns
Differential Gain 0.02% 0.02% 0.02% 0.02%
Differential Phase 0.06 degree 0.06 degree 0.06 degree 0.06 degree

Pangunahing mga Pagkakaiba

  • Combines very high bandwidth with exceptionally low per-channel supply current (kumpara saAD8012AR-REEL7)
  • Uses a lead-free 8-pin SOIC ordering configuration (kumpara saAD8012AR)
  • Provides two channels with strong video characteristics in one package (kumpara saAD8012ARZ-REEL7)

Talaan ng Disenyo

Do not select the feedback resistor by treating the AD8012ARZ as a conventional voltage-feedback amplifier. Current-feedback gain depends strongly on the recommended feedback impedance and the source impedance. Use the manufacturer value for the intended closed-loop gain, preserve the specified resistor tolerance, and evaluate stability with the actual source and load. Incorrect feedback values can produce excessive bandwidth, peaking, or oscillation even when the amplifier has ample nominal bandwidth.

Keep the input, output, and feedback paths short and route them away from noisy digital and switching nodes. Place the feedback resistor close to the relevant amplifier output and input pins, and minimize parasitic capacitance around high-impedance nodes. The two channels share a common 8-pin SOIC package, so adequate input and output decoupling is important for maintaining low distortion and preventing one channel from coupling into the other.

Budget the complete dual-amplifier supply demand using the 1.7 mA per-amplifier specification, then add the current required by the feedback network and external circuitry. Because the AD8012ARZ is intended for +6 V to +12 V or -6 V to -12 V arrangements, verify rail polarity, bypass capacitance, and startup sequencing in the complete circuit. Low amplifier current does not eliminate supply-decoupling requirements.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
Walang Lead
Yes
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

ROHS3 compliant, REACH unaffected, and MSL 1 (unlimited floor life) are stated for the AD8012ARZ. AEC-Q100 qualification, halogen-free status, and conflict-minerals status are not specified.

Data napatotohanan sa: 2026-11-18 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

ad8012arz reel7 AD8012ARZ datasheet AD8012ARZ datasheet pdf AD8012ARZ pinout AD8012ARZ specifications AD8012ARZ equivalent AD8012ARZ replacement AD8012ARZ price AD8012ARZ stock Analog Devices AD8012ARZ AD8012ARZ vs AD8012AR AD8012ARZ SOIC-8 footprint AD8012ARZ video amplifier AD8012ARZ current feedback amplifier AD8012ARZ application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices AD8012ARZ AD8012AR AD8012AR-REEL7 AD8012ARZ-REEL7 dual operational amplifier current-feedback amplifier current-feedback operational amplifier high-speed amplifier low-power amplifier signal-conditioning amplifier video amplifier 350 MHz bandwidth 20 ns settling time 1.7 mA supply current 1.5 mV offset voltage 0.02% differential gain 0.06 degree differential phase 8-pin SOIC SOIC package family surface-mount package ROHS3 REACH MSL 1
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ