AD977ARSZ - 16-Bit 100 kSPS SAR ADC | Analog Devices
料号: AD977ARSZ ✓ 量产中AD977ARSZ 概述
An ADC is an analog-to-digital converter, a semiconductor that converts a continuously varying analog voltage into a numeric representation. Within the signal-chain hierarchy, the AD977 belongs to the SAR ADC family, combines with sample-and-hold and reference circuitry inside the IC, and supports digital signal processing downstream. The SAR architecture is appropriate when moderate conversion throughput, low power consumption, and compact implementation are more important than maximum sampling speed.
Key features include 16-bit resolution, one analog input, a 100 kSPS conversion rate, and operation from a single 5 V supply. The internal 2.5 V reference reduces the need for an external reference circuit, while factory calibration helps simplify production setup. The 28-SSOP package supports conventional surface-mount assembly and provides a practical footprint for compact industrial and communications designs.
The AD977 uses a successive-approximation, switched-capacitor conversion architecture and includes a high-speed serial interface. Each conversion successively compares the sampled input against internal capacitor-generated reference levels. Because the AD977 family includes the faster AD977A, engineers should distinguish the 100 kSPS AD977 from the 200 kSPS AD977A when selecting a converter for a timing-sensitive acquisition channel.
Typical applications include pressure and temperature instrumentation, battery-powered data loggers, industrial sensor interfaces, communications receivers, and embedded control systems. The single 5 V supply simplifies power architecture, while the 16-bit resolution provides 65,536 digital codes across the converter range. Factory calibration also supports repeatable measurement performance without requiring extensive board-level adjustment.
Design the input network to minimize distortion and high-frequency noise at the ADC pins. Place input and reference bypass capacitors close to their associated device pins, maintain a quiet analog ground return, and route the serial clock and data traces away from sensitive analog inputs. Confirm the required sampling rate against the 100 kSPS device limit before allocating acquisition time in the system control loop.
This product page combines the manufacturer device description with package, interface, comparison, sourcing, and implementation guidance. It also distinguishes the AD977ARSZ from related AD977 family devices and identifies where pin-level design decisions should be made using the official Analog Devices datasheet and pin-description table.
直接替换替代料: AD977ARSZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: AD977ARSZ (相同外形与封装尺寸) ——差异在于 Package, Mounting Type, Factory Calibration, Architecture, Converter Type.
AD977ARSZ 最大额定值与电气特性
| Converter Type | 16-bit successive-approximation ADC |
| 分辨率 | 16 bit |
| Number of Inputs | 1 input |
| Throughput Rate | 100 kSPS |
| 电源电压 | 5 V |
| Internal Reference Voltage | 2.5 V |
| Architecture | Successive-approximation, switched-capacitor ADC |
| 接口类型 | High-speed serial interface |
| Factory Calibration | Factory calibrated |
| 封装 | 28-SSOP |
| 安装类型 | Surface mount |
AD977ARSZ 28-ssop 引脚配置指南
AD977ARSZ(28-ssop 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: AD977ARSZ.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AD977ARSZ 适用于 6 应用s: Industrial Sensor Acquisition, Battery-Powered Data Logging, Communications Receive Path, Process Control Monitoring, Precision Test and Measurement, Embedded Control Systems.
Industrial Sensor Acquisition
The AD977ARSZ fits industrial sensor acquisition channels that require 16-bit numerical resolution at a controlled rate. Its 100 kSPS conversion capability is suitable for temperature, pressure, position, and process-variable signals that change more slowly than the converter's maximum throughput. The internal 2.5 V reference and factory calibration simplify signal-conditioning design, while single 5 V operation reduces the number of supply rails. Place the analog input close to the converter, use a low-noise reference bypass arrangement, and isolate digital clock routing from the sensor amplifier to preserve measurement accuracy.
推荐
Battery-Powered Data Logging
AD977ARSZ is appropriate for portable data loggers that periodically record slowly changing analog measurements rather than continuous high-bandwidth waveforms. The converter can produce 16-bit code results at up to 100 kSPS, allowing duty-cycled acquisition without requiring a much faster ADC. Its single 5 V operating requirement supports common industrial or regulated power systems, and the internal reference reduces external support components. Power-budget the converter, input amplifier, and interface together because their combined draw determines useful battery life, and keep unused data paths in a defined state.
推荐
Communications Receive Path
The AD977ARSZ can serve as the digitizer in a communications receiver when channel bandwidth and sampling requirements remain below 100 kSPS. A 16-bit SAR architecture provides sufficient code density for amplitude and envelope measurement, while the high-speed serial interface supports compact implementation and controlled data transfer. The internal 2.5 V reference provides a defined conversion basis, but RF-derived signals normally require attenuation, gain control, filtering, and careful grounding before reaching the ADC. Validate settling time and acquisition timing in the complete analog chain rather than treating converter resolution as the only accuracy limit.
推荐
Process Control Monitoring
AD977ARSZ supports process-control monitoring loops where analog process variables must be digitized for thresholding, feedback, or recorded diagnostics. Its 100 kSPS maximum rate provides substantial headroom for many temperature, pressure, flow, and level signals, while 16-bit resolution preserves fine changes in the converted code. The single 5 V architecture and internal reference simplify integration into compact controller boards. In a noisy industrial enclosure, use a shielded analog front end, a dedicated analog-ground region, and short reference bypass traces; digital isolation and filtering remain essential for dependable measurements.
推荐
Precision Test and Measurement
AD977ARSZ can be incorporated into compact precision measurement instruments that need more than 8-bit resolution without the conversion rate of a waveform ADC. The 16-bit output provides 65,536 possible codes, and the internal 2.5 V reference creates a repeatable basis for ratio-based measurement. At 100 kSPS, the device is suited to controlled source measurements, status monitoring, and low-frequency envelope detection. For laboratory accuracy, separate analog and digital return paths, use low-noise input conditioning, and allow sufficient settling time before each conversion. Calibration tables should reference the exact device and test conditions.
推荐
Embedded Control Systems
AD977ARSZ is suitable for embedded controllers that acquire analog command, feedback, or diagnostic signals and communicate the results through a serial interface. Its 100 kSPS throughput supports responsive control of many electromechanical and thermal systems, while 16-bit resolution reduces quantization error compared with lower-resolution converters. The 28-SSOP package allows a compact land pattern, but layout quality remains critical because long input traces can pick up digital crosstalk. Keep the analog front end close to the converter, route clock and serial outputs away from the input, and provide local supply bypass capacitance.
推荐
推荐产品汇总
工程参考数据: AD977ARSZ ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | AD977ANZ | AD977BRSZ |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 28-SSOP | 28-SSOP | 28-SSOP |
| Throughput Rate | 100 kSPS | 100 kSPS family class | 100 kSPS family class |
关键差异点
- Defined 100 kSPS performance (对比 AD977ANZ)
- Single-supply and integrated-reference design (对比 AD977BRSZ)
- Factory-calibrated converter (对比 AD977ANZ)
设计说明
Assign analog inputs, reference connections, supplies, grounds, clock signals, and serial outputs using the AD977/AD977A manufacturer pin-description table. Place input and bypass capacitors close to their associated pins, use the shortest practical analog traces, and keep the serial clock and data paths away from sensitive input nodes. Treat exposed or adjacent grounds according to the package drawing and maintain a continuous return path beneath the device when the PCB stackup permits it.
Provide a stable single 5 V supply and decouple it locally at the device. Confirm the converter's input-voltage range, reference behavior, and acquisition timing against the manufacturer datasheet before selecting capacitor values and the analog front end. The internal 2.5 V reference simplifies the circuit but does not remove the need for clean supply distribution. Avoid placing high-current return paths through the analog ground region because supply noise can directly affect conversion accuracy.
Do not confuse the 100 kSPS AD977ARSZ with the 200 kSPS AD977A when calculating the acquisition interval. Include sampling, bit-per-sample conversion, and serial transfer in the complete control-loop timing. Also avoid assuming that 16-bit resolution guarantees 16-bit absolute accuracy; input noise, reference error, amplifier offset and distortion, source impedance, grounding, and PCB leakage all contribute to the final measurement error.
合规信息
No explicit compliance declarations are stated for the exact AD977ARSZ ordering option. Check the current Analog Devices product documentation and the manufacturer declaration applicable to the purchased lot.