Analog Devices

ADM202EARU - 2-Channel ±15kV RS-232 Transceiver | Analog Devices

料号: ADM202EARU ✓ 量产中
5 V Vdss 16-pin TSSOP Package
最小起订量: 1 |

ADM202EARU 概述

Analog Devices ADM202EARU is a two-channel, full-duplex RS-232 line driver and receiver interface IC operating from a single 5 V supply in a 16-pin TSSOP package. The device provides two driver channels and two receiver channels, generates ±10 V RS-232 output levels, and supports charge-pump capacitors as small as 0.1 µF.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts received RS-232 signals back into logic-compatible voltages. It belongs to the transceiver hierarchy within interface ICs and is used to connect equipment operating at different voltage levels over a serial link. The ADM202EARU meets or exceeds the TIA/EIA-232-E and V.28 specifications identified by Analog Devices.

The principal features include a single 5 V power supply, two transmit channels, two receive channels, ±10 V charge-pump-generated driver levels, fast driver slew rates, and ±15 kV ESD protection. Its 16-pin TSSOP package supports compact RS-232 isolation and communication designs while reducing board area compared with larger leaded packages.

The on-chip charge-pump architecture raises the driver supply above and below ground so that the output can satisfy RS-232 voltage requirements without a separate bipolar power source. Charge-pump capacitors as small as 0.1 µF reduce the external capacitor count and board area. The Analog Devices ADM202E product documentation identifies the interface as a robust, high-speed RS-232/V.28 solution intended for industrial and equipment-level serial communication.

Typical applications include RS-232 ports on industrial control equipment, data acquisition systems, instrumentation, point-of-sale terminals, and embedded serial interfaces. The device is particularly appropriate when an equipment design requires ±15 kV ESD protection and a compact 5 V-only implementation rather than a larger RS-232 interface package.

Designers should place charge-pump capacitors close to their associated pins and provide the decoupling and grounding recommended by the Analog Devices datasheet. Cabling protection, logic levels, baud rate, and line-direction control must be verified against the host interface because the IC does not by itself determine the complete external connector protection network.

This product page combines manufacturer specifications, package details, drop-in replacement information, interface applications, and practical PCB guidance in a format that helps engineers evaluate the ADM202EARU for new RS-232 designs and existing 16-pin TSSOP circuit-board revisions.

直接替换替代料: ADM202EARU ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

ADM202EARUZ

✅ 直接替换
📦 16-pin TSSOP
Same 16-pin TSSOP RS-232 transceiver family and pin-compatible upgrade context; ordering suffix may change commercial or environmental conditions, while the manufacturer does not publish a quantified electrical difference in the cited comparison.

📋 参考替代料(不在目录中)

ADM202EARU 规格参数

Product Type 2-channel full-duplex RS-232 transceiver
Driver Channel Count 2 channels
Receiver Channel Count 2 channels
电源电压 5 V
RS-232 Output Level ±10 V
Charge-Pump Capacitor as small as 0.1 µF
ESD Protection ±15 kV
Interface Standard TIA/EIA-232-E and V.28
封装 16-pin TSSOP
安装类型 Surface mount
引脚数 16 pins

ADM202EARU 16-pin tssop 引脚配置指南

ADM202EARU(16-pin tssop 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

ADM202EARU 的 16-pin tssop 封装引脚图

暂无详细引脚数据: ADM202EARU.

请参阅 数据手册 以查看完整引脚配置。

典型应用

ADM202EARU 适用于 6 应用s: Industrial RS-232 Control Interface, Data Acquisition and Instrumentation, Point-of-Sale and Peripheral Equipment, Embedded Serial Communication Port, Test and Measurement Equipment, Remote Monitoring and Control Terminal.

🏭

Industrial RS-232 Control Interface

The ADM202EARU is well suited to industrial equipment that needs two RS-232 communication channels while operating from a single 5 V rail. Its two driver and two receiver channels support simultaneous command and status paths without requiring a separate bipolar supply. The on-chip charge pump produces ±10 V output levels, while ±15 kV ESD protection adds a useful layer of ruggedness at the IC interface. Use the 16-pin TSSOP package to conserve board area in controllers, service panels, and machine interfaces, and follow the Analog Devices charge-pump layout to minimize noise and maintain reliable data transmission.

📟

Data Acquisition and Instrumentation

The ADM202EARU can connect laboratory instruments, data loggers, and acquisition controllers that exchange serial commands and measurements over RS-232. Two transmit channels support outbound control or status messages, while two receive channels accept instrument responses and measurements. Operation from one 5 V supply simplifies instrumentation power architecture, and the compact 16-pin TSSOP footprint helps when connector placement is constrained. The ±15 kV ESD-protected interface is valuable in bench and industrial environments where cables may be handled frequently, although the external connector and cable still require suitable protection.

🖥️

Point-of-Sale and Peripheral Equipment

The ADM202EARU provides a compact interface for point-of-sale terminals, printers, scanners, and other peripherals that use RS-232. A single 5 V supply reduces the number of rails required near the logic section, and the charge pump generates the required ±10 V RS-232 levels internally. The 16-pin TSSOP package leaves more PCB area available for processor, memory, and connector routing than larger DIP or SOIC solutions. Designers should place charge-pump capacitors close to their pins and use the Analog Devices grounding arrangement to limit coupling into surrounding digital circuitry.

🧩

Embedded Serial Communication Port

The ADM202EARU is useful when an embedded controller needs a compact, logic-to-RS-232 interface with more than one communication path. Two driver and receiver channels can carry separate protocols or connect command and telemetry ports, while the single 5 V operation matches many embedded power rails. Its 16-pin TSSOP package supports compact board designs, but its lead pitch requires careful footprint inspection during schematic and PCB review. Follow the manufacturer pin-description and capacitor-placement guidance to preserve signal integrity and ensure that the completed assembly can be inspected reliably.

🖥️

Test and Measurement Equipment

The ADM202EARU can add two RS-232 ports to programmable test equipment, communication analyzers, and automated test systems. Its ±10 V charge-pump outputs and fast driver operation support standard RS-232 signaling, while ±15 kV ESD protection helps the interface withstand handling and cable transients. The compact TSSOP package is advantageous when the serial interface must fit beside dense measurement circuitry. At the board level, maintain a quiet ground return, place bypass and charge-pump capacitors according to the Analog Devices layout, and combine the IC with connector-level protection for a complete robust interface.

🌐

Remote Monitoring and Control Terminal

The ADM202EARU fits remote monitoring and control terminals that transmit commands, alarms, and diagnostic information over RS-232. Its two full-duplex channels allow a controller to manage separate command and response links, reducing the need for additional interface components. A single 5 V supply supports streamlined power design, and the TSSOP-16 package supports space-constrained terminal boards. The ±15 kV ESD protection is particularly useful when field-wired cables enter the enclosure, although engineers should still implement appropriate connector and cable protection and verify that the interface grounding strategy meets the installation requirements.

推荐产品汇总

ADM202EARU Analog Devices 用于: Industrial RS-232 Control Interface, Data Acquisition and Instrumentation, Point-of-Sale and Peripheral Equipment, Embedded Serial Communication Port, Test and Measurement Equipment, Remote Monitoring and Control Terminal ADM202EARUZ Same-family TSSOP alternative 用于: Industrial RS-232 Control Interface, Data Acquisition and Instrumentation, Point-of-Sale and Peripheral Equipment, Embedded Serial Communication Port, Test and Measurement Equipment, Remote Monitoring and Control Terminal
What are the key specifications of ADM202EARU that engineers should know?
The ADM202EARU is a two-channel full-duplex RS-232 transceiver with two drivers, two receivers, a single 5 V supply, ±10 V charge-pump output levels, and ±15 kV ESD protection in a 16-pin TSSOP package. According to the Analog Devices ADM202E/ADM1181A datasheet, it meets or exceeds the TIA/EIA-232-E and V.28 specifications and permits charge-pump capacitors as small as 0.1 µF.
What is the operating voltage of ADM202EARU?
The ADM202EARU operates from a single 5 V power supply. According to the Analog Devices ADM202E/ADM1181A datasheet, the on-chip charge pump develops the bipolar voltage required for ±10 V RS-232 output levels from that single supply. The complete application circuit must still observe the operating limits, decoupling, and grounding details specified for the device.
Where can I download the ADM202EARU datasheet PDF?
The ADM202EARU datasheet PDF is available from the official Analog Devices technical-document link on this page. It is titled ADM2023_1181A and covers the ADM202E and ADM1181A families. The document contains the electrical characteristics, pin descriptions, charge-pump arrangement, RS-232 interface details, and application information needed to evaluate the 16-pin TSSOP implementation.
Where can I find the ADM202EARU pinout?
The ADM202EARU pinout is presented in the pin-description section of the official Analog Devices ADM202E/ADM1181A datasheet. Use that table when assigning the driver inputs, receiver outputs, charge-pump capacitor nodes, supply pins, and grounds for the 16-pin TSSOP footprint. The web product summary does not reproduce every numbered pin, so the manufacturer diagram should remain the PCB-assignment authority.
What can replace ADM202EARU?
A directly usable replacement must use the same 16-pin TSSOP footprint, preserve the RS-232 charge-pump connection pattern, and match the important interface ratings. The ADM202EARUZ is a documented close alternative in the same Analog Devices family, but production substitutions should be checked against temperature grade, lifecycle, marking, and ESD requirements before approval. Use the Request a Quote form on this page when confirming supply and sourcing status.
Is ADM202EARU the same as ADM202EARUZ?
The ADM202EARU and ADM202EARUZ are closely related Analog Devices orderable variants for the same 16-pin TSSOP RS-232 transceiver family, but the final suffix can encode ordering, packaging, or qualification distinctions. Confirm the manufacturer ordering information and required temperature grade before treating them as interchangeable. A PCB-level drop-in decision must also verify the exposed-pad and pin-layout details.
What is the best Analog Devices equivalent for ADM202EARU?
The ADM202EARUZ is the closest documented Analog Devices alternative for an ADM202EARU redesign because it belongs to the same ADM202E product family and the comparison records identify the same TSSOP-16 device category. It should be treated as a candidate rather than an unconditional substitute until temperature grade, lifecycle, and exact ordering requirements are confirmed against the manufacturer documentation.
ADM202EARU vs ADM202EARUZ: which should I select?
Select ADM202EARU when it is the exact manufacturer orderable part specified by the design and procurement documents. Consider ADM202EARUZ when the product family remains acceptable and the ordering suffix meets the required commercial and environmental conditions. Both are associated with the 16-pin TSSOP RS-232 implementation, but the datasheet and ordering table remain the deciding authorities for qualification details.
When should I choose ADM202EARU instead of a larger RS-232 interface package?
Choose ADM202EARU when the design needs two RS-232 transmit channels, two receive channels, one 5 V supply, and compact PCB placement. Its 16-pin TSSOP package avoids the larger footprint associated with DIP and SOIC implementations. The trade-off is that TSSOP assembly and board-space planning require careful attention to lead pitch, charge-pump placement, and soldering practices.
Is ADM202EARU suitable for industrial RS-232 equipment?
The ADM202EARU is suitable for compact RS-232 equipment requiring two channels in each direction, a single 5 V supply, and ±15 kV ESD protection. According to the Analog Devices product documentation, the interface meets or exceeds TIA/EIA-232-E and V.28 specifications. Final industrial suitability still depends on the required temperature range, system isolation strategy, cable protection, and enclosure environment.
How much ESD protection does ADM202EARU provide?
The ADM202EARU provides ±15 kV ESD protection on its RS-232 interface. Analog Devices describes the ADM202E family as an EMI/EMC-compliant, ESD-protected RS-232 line driver and receiver family. The system designer must still use a suitable connector, cable, grounding, and protection network because the IC rating is one component of the complete surge and ESD protection strategy.
Why does ADM202EARU use charge-pump capacitors as small as 0.1 µF?
The ADM202EARU uses an efficient on-chip charge pump to generate ±10 V RS-232 output levels from a single 5 V supply. Analog Devices specifies that the charge-pump capacitors may be as small as 0.1 µF, reducing external capacitor size and overall board area. Their placement should follow the datasheet layout because short, clean charge-pump connections improve noise and transmission performance.
Where can I buy ADM202EARU and what is its price?
Use the Request a Quote form on this page to request ADM202EARU pricing, current availability, minimum order quantity, and lead time. The visible product page is the appropriate commercial channel because the price and stock position can change. The form also allows buyers to specify quantity, package preference, and shipment destination without relying on stale listing information.
What is the lead time and stock status for ADM202EARU?
Current stock, lead time, and minimum order quantity for ADM202EARU should be obtained through the Request a Quote form on this page. The manufacturer documentation establishes the device as a 2-channel, single-supply RS-232 interface in a 16-pin TSSOP package, but it does not establish a current delivery commitment. Submit the required quantity and destination to receive a time-specific sourcing response.
How should charge-pump capacitors be placed around ADM202EARU?
Place the ADM202EARU charge-pump capacitors close to the pins specified by the Analog Devices datasheet and keep their return paths short. Follow the manufacturer decoupling and grounding layout to minimize loop area and preserve the fast driver slew behavior. Avoid routing sensitive signals through the charge-pump region, and confirm that the capacitor type and voltage rating comply with the circuit requirements.

工程参考数据: ADM202EARU ——对比、设计指导和合规信息。

选型指南

Choose ADM202EARU when the bill of materials specifies that exact orderable device and the design needs a compact, two-channel full-duplex RS-232 interface with a single 5 V supply. Its 16-pin TSSOP package, on-chip charge pump, ±10 V output capability, and ±15 kV ESD protection make it suitable for industrial, instrumentation, embedded, and test-equipment serial ports. Consider ADM202EARUZ when the same-family TSSOP implementation is desired but the ordering suffix, lifecycle, and qualification conditions better match the production program. Verify the manufacturer ordering table, temperature grade, pin configuration, and marking before approving either part as a substitute. No additional drop-in candidates were included because the retrieved cross-reference records did not establish five or more distinct same-package devices with verified pin compatibility and quantified parameter differences.

与替代料对比

参数 本产品 ADM202EARUZ
Brand Analog Devices Analog Devices
Package 16-pin TSSOP 16-pin TSSOP
Interface Type RS-232 line driver and receiver RS-232 line driver and receiver
Channel Configuration 2 transmitter and 2 receiver channels 2 transmitter and 2 receiver channels
Supply Voltage 5 V 5 V
RS-232 Output Level ±10 V ±10 V
ESD Protection ±15 kV ±15 kV
Charge-Pump Capacitor as small as 0.1 µF as small as 0.1 µF
Interface Standards TIA/EIA-232-E and V.28 TIA/EIA-232-E and V.28

关键差异点

  • Two-channel full-duplex RS-232 interface (对比 ADM202EARUZ)
  • Single-supply bipolar output generation (对比 ADM202EARUZ)
  • ESD-protected interface (对比 ADM202EARUZ)

设计说明

Place the charge-pump capacitors close to the pins identified in the Analog Devices ADM202E/ADM1181A datasheet. Keep the associated current loops short and follow the manufacturer's ground and bypass-capacitor recommendations. The 16-pin TSSOP footprint also requires inspection for lead pitch and assembly clearance before transferring the circuit to a new PCB.

Do not treat ±15 kV IC ESD protection as a complete cable or connector protection system. Add the appropriate connector and cable protection for the installation environment, and verify that chassis, logic ground, and RS-232 signal grounding follow the system architecture. An incorrectly designed return path can reduce surge performance or introduce noise.

Route charge-pump nodes and driver outputs away from sensitive receiver inputs and keep the ground return continuous beneath the interface area. The device uses fast driver slew rates, so controlled impedance and minimized loop area help contain conducted and radiated emissions. Follow the datasheet reference layout rather than improvising long capacitor connections during board revisions.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The retrieved manufacturer descriptions identify the ADM202 family as EMI/EMC-compliant and ESD-protected, but they do not explicitly state the component-level RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because the target is an RS-232 interface IC rather than an automotive-qualified device.

相关搜索

ADM202EARU datasheet ADM202EARU pinout ADM202EARU datasheet pdf ADM202EARU specifications ADM202EARU equivalent ADM202EARU replacement ADM202EARU cross reference ADM202EARU vs ADM202EARUZ ADM202EARU TSSOP-16 footprint ADM202EARU RS-232 application circuit Analog Devices ADM202EARU ADM202EARU price ADM202EARU stock where to buy ADM202EARU

相关元器件 & 术语

Analog Devices ADM202EARU ADM202EARUZ ADM202E RS-232 transceiver RS-232 line driver RS-232 line receiver full-duplex interface interface IC semiconductor TIA/EIA-232-E V.28 single 5 V supply on-chip charge pump charge-pump capacitor ±10 V RS-232 output ±15 kV ESD protection 16-pin TSSOP TSSOP package family surface-mount package industrial control equipment data acquisition test and measurement remote monitoring and control
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情