ADM202EARU - 2-Channel ±15kV RS-232 Transceiver | Analog Devices
N.º de pieza: ADM202EARU ✓ ActivoADM202EARU Descripción general
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts received RS-232 signals back into logic-compatible voltages. It belongs to the transceiver hierarchy within interface ICs and is used to connect equipment operating at different voltage levels over a serial link. The ADM202EARU meets or exceeds the TIA/EIA-232-E and V.28 specifications identified by Analog Devices.
The principal features include a single 5 V power supply, two transmit channels, two receive channels, ±10 V charge-pump-generated driver levels, fast driver slew rates, and ±15 kV ESD protection. Its 16-pin TSSOP package supports compact RS-232 isolation and communication designs while reducing board area compared with larger leaded packages.
The on-chip charge-pump architecture raises the driver supply above and below ground so that the output can satisfy RS-232 voltage requirements without a separate bipolar power source. Charge-pump capacitors as small as 0.1 µF reduce the external capacitor count and board area. The Analog Devices ADM202E product documentation identifies the interface as a robust, high-speed RS-232/V.28 solution intended for industrial and equipment-level serial communication.
Typical applications include RS-232 ports on industrial control equipment, data acquisition systems, instrumentation, point-of-sale terminals, and embedded serial interfaces. The device is particularly appropriate when an equipment design requires ±15 kV ESD protection and a compact 5 V-only implementation rather than a larger RS-232 interface package.
Designers should place charge-pump capacitors close to their associated pins and provide the decoupling and grounding recommended by the Analog Devices datasheet. Cabling protection, logic levels, baud rate, and line-direction control must be verified against the host interface because the IC does not by itself determine the complete external connector protection network.
This product page combines manufacturer specifications, package details, drop-in replacement information, interface applications, and practical PCB guidance in a format that helps engineers evaluate the ADM202EARU for new RS-232 designs and existing 16-pin TSSOP circuit-board revisions.
Alternativas directas para ADM202EARU — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
ADM202EARUZ
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ADM202EARU Especificaciones
| Product Type | 2-channel full-duplex RS-232 transceiver |
| Driver Channel Count | 2 channels |
| Receiver Channel Count | 2 channels |
| Tensión de alimentación | 5 V |
| RS-232 Output Level | ±10 V |
| Charge-Pump Capacitor | as small as 0.1 µF |
| ESD Protection | ±15 kV |
| Interface Standard | TIA/EIA-232-E and V.28 |
| Encapsulado | 16-pin TSSOP |
| Tipo de montaje | Surface mount |
| Número de pines | 16 pins |
Guía de configuración de pines de ADM202EARU 16-pin tssop
Configuración de pines para ADM202EARU (encapsulado 16-pin tssop). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para ADM202EARU.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
ADM202EARU es adecuado para 6 aplicacións: Industrial RS-232 Control Interface, Data Acquisition and Instrumentation, Point-of-Sale and Peripheral Equipment, Embedded Serial Communication Port, Test and Measurement Equipment, Remote Monitoring and Control Terminal.
Industrial RS-232 Control Interface
The ADM202EARU is well suited to industrial equipment that needs two RS-232 communication channels while operating from a single 5 V rail. Its two driver and two receiver channels support simultaneous command and status paths without requiring a separate bipolar supply. The on-chip charge pump produces ±10 V output levels, while ±15 kV ESD protection adds a useful layer of ruggedness at the IC interface. Use the 16-pin TSSOP package to conserve board area in controllers, service panels, and machine interfaces, and follow the Analog Devices charge-pump layout to minimize noise and maintain reliable data transmission.
Recomendado
Data Acquisition and Instrumentation
The ADM202EARU can connect laboratory instruments, data loggers, and acquisition controllers that exchange serial commands and measurements over RS-232. Two transmit channels support outbound control or status messages, while two receive channels accept instrument responses and measurements. Operation from one 5 V supply simplifies instrumentation power architecture, and the compact 16-pin TSSOP footprint helps when connector placement is constrained. The ±15 kV ESD-protected interface is valuable in bench and industrial environments where cables may be handled frequently, although the external connector and cable still require suitable protection.
Recomendado
Point-of-Sale and Peripheral Equipment
The ADM202EARU provides a compact interface for point-of-sale terminals, printers, scanners, and other peripherals that use RS-232. A single 5 V supply reduces the number of rails required near the logic section, and the charge pump generates the required ±10 V RS-232 levels internally. The 16-pin TSSOP package leaves more PCB area available for processor, memory, and connector routing than larger DIP or SOIC solutions. Designers should place charge-pump capacitors close to their pins and use the Analog Devices grounding arrangement to limit coupling into surrounding digital circuitry.
Recomendado
Embedded Serial Communication Port
The ADM202EARU is useful when an embedded controller needs a compact, logic-to-RS-232 interface with more than one communication path. Two driver and receiver channels can carry separate protocols or connect command and telemetry ports, while the single 5 V operation matches many embedded power rails. Its 16-pin TSSOP package supports compact board designs, but its lead pitch requires careful footprint inspection during schematic and PCB review. Follow the manufacturer pin-description and capacitor-placement guidance to preserve signal integrity and ensure that the completed assembly can be inspected reliably.
Recomendado
Test and Measurement Equipment
The ADM202EARU can add two RS-232 ports to programmable test equipment, communication analyzers, and automated test systems. Its ±10 V charge-pump outputs and fast driver operation support standard RS-232 signaling, while ±15 kV ESD protection helps the interface withstand handling and cable transients. The compact TSSOP package is advantageous when the serial interface must fit beside dense measurement circuitry. At the board level, maintain a quiet ground return, place bypass and charge-pump capacitors according to the Analog Devices layout, and combine the IC with connector-level protection for a complete robust interface.
Recomendado
Remote Monitoring and Control Terminal
The ADM202EARU fits remote monitoring and control terminals that transmit commands, alarms, and diagnostic information over RS-232. Its two full-duplex channels allow a controller to manage separate command and response links, reducing the need for additional interface components. A single 5 V supply supports streamlined power design, and the TSSOP-16 package supports space-constrained terminal boards. The ±15 kV ESD protection is particularly useful when field-wired cables enter the enclosure, although engineers should still implement appropriate connector and cable protection and verify that the interface grounding strategy meets the installation requirements.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para ADM202EARU — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | ADM202EARUZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 16-pin TSSOP | 16-pin TSSOP |
| Interface Type | RS-232 line driver and receiver | RS-232 line driver and receiver |
| Channel Configuration | 2 transmitter and 2 receiver channels | 2 transmitter and 2 receiver channels |
| Supply Voltage | 5 V | 5 V |
| RS-232 Output Level | ±10 V | ±10 V |
| ESD Protection | ±15 kV | ±15 kV |
| Charge-Pump Capacitor | as small as 0.1 µF | as small as 0.1 µF |
| Interface Standards | TIA/EIA-232-E and V.28 | TIA/EIA-232-E and V.28 |
Diferenciadores clave
- Two-channel full-duplex RS-232 interface (frente a ADM202EARUZ)
- Single-supply bipolar output generation (frente a ADM202EARUZ)
- ESD-protected interface (frente a ADM202EARUZ)
Notas de diseño
Place the charge-pump capacitors close to the pins identified in the Analog Devices ADM202E/ADM1181A datasheet. Keep the associated current loops short and follow the manufacturer's ground and bypass-capacitor recommendations. The 16-pin TSSOP footprint also requires inspection for lead pitch and assembly clearance before transferring the circuit to a new PCB.
Do not treat ±15 kV IC ESD protection as a complete cable or connector protection system. Add the appropriate connector and cable protection for the installation environment, and verify that chassis, logic ground, and RS-232 signal grounding follow the system architecture. An incorrectly designed return path can reduce surge performance or introduce noise.
Route charge-pump nodes and driver outputs away from sensitive receiver inputs and keep the ground return continuous beneath the interface area. The device uses fast driver slew rates, so controlled impedance and minimized loop area help contain conducted and radiated emissions. Follow the datasheet reference layout rather than improvising long capacitor connections during board revisions.
Información de cumplimiento
The retrieved manufacturer descriptions identify the ADM202 family as EMI/EMC-compliant and ESD-protected, but they do not explicitly state the component-level RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because the target is an RS-232 interface IC rather than an automotive-qualified device.