ADM3222ARU - 3.3V Dual RS-232 Transceiver | Analog Devices
料号: ADM3222ARU ✓ 量产中ADM3222ARU 概述
An RS-232 transceiver is an interface IC that converts logic-level transmit and receive signals into RS-232 line levels and converts incoming RS-232 signals back into CMOS-compatible logic. Within the interface hierarchy, the ADM3222ARU is an RS-232 transceiver, a serial-interface IC, and ultimately a general-purpose semiconductor. Its integrated voltage-doubling and inverter charge-pump circuitry eliminates a separate bipolar power supply when the system already has 3.3 V power.
Key features include two transmit channels, two receive channels, operation from one 3.3 V supply, external 0.1 µF charge-pump capacitors, and integrated enable and shutdown circuitry. The charge-pump approach supports portable and battery-operated equipment by avoiding external RS-232 line-power generation. The interface is intended for data rates up to 230 kbps according to the Analog Devices product page.
The ADM3222 receives and transmits through its charge-pump-generated RS-232 levels, while the enable and shutdown functions provide control over operating state. Four external 0.1 µF capacitors are required for the voltage doubler and inverter. The device is also described as an upgrade path for MAX3222 and MAX3232 designs, with enhanced electrostatic-discharge protection rated to IEC 1000-4-2.
Typical applications include industrial serial adapters, portable test equipment, point-of-sale terminals, instrument-control links, and embedded systems that retain an RS-232 port for compatibility with legacy peripherals. Its single 3.3 V supply is especially useful where a modern controller operates from 3.3 V and adding positive and negative RS-232 rails would increase design complexity.
Place all four 0.1 µF charge-pump capacitors close to their designated pins, keep the RS-232 signal traces away from sensitive analog or high-speed digital paths, and provide local supply decoupling near the device. Confirm the transmitter output levels and receiver thresholds at the system interface because cable length, grounding, and ESD exposure determine whether additional protection or isolation is required.
This page combines the manufacturer's electrical specifications with package-level guidance, interface applications, verified cross-references, and practical layout considerations for engineers evaluating the ADM3222ARU or planning a pin-compatible replacement.
直接替换替代料: ADM3222ARU ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
ADM3232EARUZ
✅ 直接替换📋 参考替代料(不在目录中)
ADM1385ARU
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MAX3222CPW
✅ 直接替换📋 参考替代料(不在目录中)
ICL3222ECVZ
✅ 直接替换📋 参考替代料(不在目录中)
ADM3222ARU 规格参数
| Product Type | 2/2 RS-232 transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| 电源电压 | 3.3 V |
| Maximum Data Rate | 230 kbps |
| Charge-Pump Capacitor Value | 0.1 µF |
| Number of Charge-Pump Capacitors | 4 |
| RS-232 Compliance | EIA-232E |
| RS-232 Compliance | CCITT V.28 |
| ESD Protection Standard | IEC 1000-4-2 |
| ESD Protection Level | 801.2 |
| Enable and Shutdown Circuitry | Yes |
| 封装 | 20-lead TSSOP |
| 安装类型 | Surface Mount |
ADM3222ARU 20-lead tssop 引脚配置指南
ADM3222ARU(20-lead tssop 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: ADM3222ARU.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ADM3222ARU 适用于 6 应用s: Portable RS-232 Serial Adapter, Industrial Instrument Control Link, Point-of-Sale Terminal Interface, Embedded Data-Acquisition System, Legacy Serial Console Access, Portable Test and Measurement Equipment.
Portable RS-232 Serial Adapter
The ADM3222ARU fits portable serial adapters because it combines two transmit channels, two receive channels, and a single 3.3 V supply in a 20-lead TSSOP package. Its four external 0.1 µF charge-pump capacitors generate the RS-232 line voltage internally, reducing the need for a separate negative supply. The manufacturer specifies operation up to 230 kbps and EIA-232E and CCITT V.28 conformance. In a battery-powered design, the enable and shutdown circuitry can reduce power consumption when the port is inactive, although the complete power budget should also include controller and cable-load requirements.
推荐
Industrial Instrument Control Link
The ADM3222ARU is appropriate for connecting a modern controller to legacy instrumentation that uses RS-232. Its 3.3 V operation permits use in a modern embedded control system without generating external positive and negative rails, while the 230 kbps maximum rate covers common serial-port protocols and lower-speed diagnostic channels. Two driver and two receiver channels provide useful bidirectional connectivity. Place the charge-pump capacitors close to their assigned pins, isolate receive paths from noisy equipment, and verify grounding and cable length at the connector because RS-232 performance depends on the complete signal path rather than only the IC.
推荐
Point-of-Sale Terminal Interface
The ADM3222ARU can support point-of-sale equipment that retains an RS-232 peripheral port while the main terminal electronics operate from 3.3 V. Two transmitters and two receivers allow simultaneous connection to more than one serial peripheral, subject to protocol timing and system requirements. The single-supply charge-pump design simplifies board-level power planning, and the integrated shutdown function allows the interface to be disabled when no transaction traffic is present. For exposed retail equipment, add connector-side surge and ESD protection as required by the installation environment rather than assuming the transceiver rating alone protects the complete port.
推荐
Embedded Data-Acquisition System
The ADM3222ARU is useful in embedded data-acquisition units that must communicate with older laboratory equipment or industrial sensors. Operating from 3.3 V aligns with many embedded processors and reduces external power-conversion stages, while the 20-lead TSSOP package supports compact layouts. The 230 kbps limit is suitable for many command and control protocols, but the system designer must ensure that protocol timing, parity, flow control, and cable capacitance remain within acceptable limits. Use a solid common ground and route the receive traces away from switching supplies and clocked digital circuits to avoid introducing errors into acquired data.
推荐
Legacy Serial Console Access
The ADM3222ARU supports legacy serial-console access when a modern processor or single-board computer must remain compatible with existing RS-232 peripherals. A single 3.3 V rail simplifies integration with embedded logic, and the integrated shutdown control can disable the interface during low-power states. The EIA-232E and CCITT V.28 compliance provides a defined basis for interoperable signaling. Designers should verify the UART logic levels, connector gender, signal assignment, and cable topology, because the transceiver being electrically compatible does not guarantee that every legacy cable uses the same pin arrangement.
推荐
Portable Test and Measurement Equipment
The ADM3222ARU is appropriate for portable test equipment that communicates with analyzers, meters, or service computers over RS-232. Its low-voltage supply operation aligns with compact battery-powered instruments, and the shutdown function supports power conservation between measurement cycles. The 230 kbps maximum data rate supports many legacy instrument-control protocols. Designers should budget capacitor board area for the four 0.1 µF charge-pump capacitors, use a low-noise ground plane, and keep transmit and receive paths physically separated where long cables or nearby switching circuitry could introduce coupling.
推荐
推荐产品汇总
工程参考数据: ADM3222ARU ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ADM3232EARUZ | ADM1385ARU | MAX3222CPW | ICL3222ECVZ |
|---|---|---|---|---|---|
| Package | 20-lead TSSOP | 20-lead TSSOP | 20-lead TSSOP | 20-lead TSSOP | 20-lead TSSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Renesas Electronics |
| Product Type | 2/2 RS-232 transceiver | 2/2 RS-232 transceiver | RS-232 interface device | RS-232 transceiver | RS-232 transceiver |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Driver and Receiver Channels | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers |
关键差异点
- Direct 3.3 V operation with integrated bipolar charge-pump generation (对比 MAX3222CPW)
- Higher signaling-rate option with enhanced ESD protection (对比 ADM3232EARUZ)
- Native Analog Devices family with integrated power control (对比 ICL3222ECVZ)
设计说明
Place the four required 0.1 µF charge-pump capacitors adjacent to their assigned ADM3222ARU pins and minimize the area of each capacitor loop. Keep the generated charge-pump nodes away from RS-232 receiver inputs, clock signals, precision analog traces, and long parallel digital runs. A continuous ground plane beneath the device helps control return currents, while separating transmit and receive routing reduces susceptibility to cable-borne transients.
Do not treat the ADM3222ARU as a direct TTL-to-RS-232 logic translator. Confirm the numbered pin functions, transmit polarity, receiver polarity, enable or shutdown state, and charge-pump capacitor connections against the manufacturer datasheet. Also verify that the selected cable and connector use the intended RS-232 signal assignments; an electrically compatible transceiver cannot correct a mismatched connector pinout.
Separate the RS-232 connector-side traces from sensitive board regions and connect the interface ground to the chassis or signal ground according to the equipment architecture. High-current return paths should not share narrow traces with the transceiver ground. If the connected cable leaves the enclosure, evaluate connector-side protection and isolation in addition to the device's IEC 1000-4-2 801.2 ESD rating.
Include the ADM3222ARU and its charge-pump capacitors in the 3.3 V rail's worst-case power budget across transmit activity, receive activity, and shutdown. Place local high-frequency decoupling at the device's supply pins and route it with a low-impedance ground return. Startup and shutdown timing should be coordinated with the attached UART so that the host does not interpret an uncontrolled interface state as valid serial data.
合规信息
The manufacturer documentation identifies EIA-232E, CCITT V.28, and IEC 1000-4-2 compliance. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated and remain unknown.