ADM3222ARU - 3.3V Dual RS-232 Transceiver | Analog Devices
MPN: ADM3222ARU ✓ פעילADM3222ARU סקירה
An RS-232 transceiver is an interface IC that converts logic-level transmit and receive signals into RS-232 line levels and converts incoming RS-232 signals back into CMOS-compatible logic. Within the interface hierarchy, the ADM3222ARU is an RS-232 transceiver, a serial-interface IC, and ultimately a general-purpose semiconductor. Its integrated voltage-doubling and inverter charge-pump circuitry eliminates a separate bipolar power supply when the system already has 3.3 V power.
Key features include two transmit channels, two receive channels, operation from one 3.3 V supply, external 0.1 µF charge-pump capacitors, and integrated enable and shutdown circuitry. The charge-pump approach supports portable and battery-operated equipment by avoiding external RS-232 line-power generation. The interface is intended for data rates up to 230 kbps according to the Analog Devices product page.
The ADM3222 receives and transmits through its charge-pump-generated RS-232 levels, while the enable and shutdown functions provide control over operating state. Four external 0.1 µF capacitors are required for the voltage doubler and inverter. The device is also described as an upgrade path for MAX3222 and MAX3232 designs, with enhanced electrostatic-discharge protection rated to IEC 1000-4-2.
Typical applications include industrial serial adapters, portable test equipment, point-of-sale terminals, instrument-control links, and embedded systems that retain an RS-232 port for compatibility with legacy peripherals. Its single 3.3 V supply is especially useful where a modern controller operates from 3.3 V and adding positive and negative RS-232 rails would increase design complexity.
Place all four 0.1 µF charge-pump capacitors close to their designated pins, keep the RS-232 signal traces away from sensitive analog or high-speed digital paths, and provide local supply decoupling near the device. Confirm the transmitter output levels and receiver thresholds at the system interface because cable length, grounding, and ESD exposure determine whether additional protection or isolation is required.
This page combines the manufacturer's electrical specifications with package-level guidance, interface applications, verified cross-references, and practical layout considerations for engineers evaluating the ADM3222ARU or planning a pin-compatible replacement.
חלופות תחליף ישיר עבור ADM3222ARU — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
ADM3232EARUZ
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ADM1385ARU
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
MAX3222CPW
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ICL3222ECVZ
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ADM3222ARU מפרטים
| Product Type | 2/2 RS-232 transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| מתח אספקה | 3.3 V |
| Maximum Data Rate | 230 kbps |
| Charge-Pump Capacitor Value | 0.1 µF |
| Number of Charge-Pump Capacitors | 4 |
| RS-232 Compliance | EIA-232E |
| RS-232 Compliance | CCITT V.28 |
| ESD Protection Standard | IEC 1000-4-2 |
| ESD Protection Level | 801.2 |
| Enable and Shutdown Circuitry | Yes |
| מארז | 20-lead TSSOP |
| סוג הרכבה | Surface Mount |
מדריך תצורת פינים של ADM3222ARU 20-lead tssop
תצורת פינים עבור ADM3222ARU (מארזת 20-lead tssop). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור ADM3222ARU.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
ADM3222ARU מתאים עבור 6 יישוםs: Portable RS-232 Serial Adapter, Industrial Instrument Control Link, Point-of-Sale Terminal Interface, Embedded Data-Acquisition System, Legacy Serial Console Access, Portable Test and Measurement Equipment.
Portable RS-232 Serial Adapter
The ADM3222ARU fits portable serial adapters because it combines two transmit channels, two receive channels, and a single 3.3 V supply in a 20-lead TSSOP package. Its four external 0.1 µF charge-pump capacitors generate the RS-232 line voltage internally, reducing the need for a separate negative supply. The manufacturer specifies operation up to 230 kbps and EIA-232E and CCITT V.28 conformance. In a battery-powered design, the enable and shutdown circuitry can reduce power consumption when the port is inactive, although the complete power budget should also include controller and cable-load requirements.
מומלץ
Industrial Instrument Control Link
The ADM3222ARU is appropriate for connecting a modern controller to legacy instrumentation that uses RS-232. Its 3.3 V operation permits use in a modern embedded control system without generating external positive and negative rails, while the 230 kbps maximum rate covers common serial-port protocols and lower-speed diagnostic channels. Two driver and two receiver channels provide useful bidirectional connectivity. Place the charge-pump capacitors close to their assigned pins, isolate receive paths from noisy equipment, and verify grounding and cable length at the connector because RS-232 performance depends on the complete signal path rather than only the IC.
מומלץ
Point-of-Sale Terminal Interface
The ADM3222ARU can support point-of-sale equipment that retains an RS-232 peripheral port while the main terminal electronics operate from 3.3 V. Two transmitters and two receivers allow simultaneous connection to more than one serial peripheral, subject to protocol timing and system requirements. The single-supply charge-pump design simplifies board-level power planning, and the integrated shutdown function allows the interface to be disabled when no transaction traffic is present. For exposed retail equipment, add connector-side surge and ESD protection as required by the installation environment rather than assuming the transceiver rating alone protects the complete port.
מומלץ
Embedded Data-Acquisition System
The ADM3222ARU is useful in embedded data-acquisition units that must communicate with older laboratory equipment or industrial sensors. Operating from 3.3 V aligns with many embedded processors and reduces external power-conversion stages, while the 20-lead TSSOP package supports compact layouts. The 230 kbps limit is suitable for many command and control protocols, but the system designer must ensure that protocol timing, parity, flow control, and cable capacitance remain within acceptable limits. Use a solid common ground and route the receive traces away from switching supplies and clocked digital circuits to avoid introducing errors into acquired data.
מומלץ
Legacy Serial Console Access
The ADM3222ARU supports legacy serial-console access when a modern processor or single-board computer must remain compatible with existing RS-232 peripherals. A single 3.3 V rail simplifies integration with embedded logic, and the integrated shutdown control can disable the interface during low-power states. The EIA-232E and CCITT V.28 compliance provides a defined basis for interoperable signaling. Designers should verify the UART logic levels, connector gender, signal assignment, and cable topology, because the transceiver being electrically compatible does not guarantee that every legacy cable uses the same pin arrangement.
מומלץ
Portable Test and Measurement Equipment
The ADM3222ARU is appropriate for portable test equipment that communicates with analyzers, meters, or service computers over RS-232. Its low-voltage supply operation aligns with compact battery-powered instruments, and the shutdown function supports power conservation between measurement cycles. The 230 kbps maximum data rate supports many legacy instrument-control protocols. Designers should budget capacitor board area for the four 0.1 µF charge-pump capacitors, use a low-noise ground plane, and keep transmit and receive paths physically separated where long cables or nearby switching circuitry could introduce coupling.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ADM3222ARU — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ADM3232EARUZ | ADM1385ARU | MAX3222CPW | ICL3222ECVZ |
|---|---|---|---|---|---|
| Package | 20-lead TSSOP | 20-lead TSSOP | 20-lead TSSOP | 20-lead TSSOP | 20-lead TSSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Renesas Electronics |
| Product Type | 2/2 RS-232 transceiver | 2/2 RS-232 transceiver | RS-232 interface device | RS-232 transceiver | RS-232 transceiver |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Driver and Receiver Channels | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers |
מבדילים עיקריים
- Direct 3.3 V operation with integrated bipolar charge-pump generation (לעומתMAX3222CPW)
- Higher signaling-rate option with enhanced ESD protection (לעומתADM3232EARUZ)
- Native Analog Devices family with integrated power control (לעומתICL3222ECVZ)
הערות תכנון
Place the four required 0.1 µF charge-pump capacitors adjacent to their assigned ADM3222ARU pins and minimize the area of each capacitor loop. Keep the generated charge-pump nodes away from RS-232 receiver inputs, clock signals, precision analog traces, and long parallel digital runs. A continuous ground plane beneath the device helps control return currents, while separating transmit and receive routing reduces susceptibility to cable-borne transients.
Do not treat the ADM3222ARU as a direct TTL-to-RS-232 logic translator. Confirm the numbered pin functions, transmit polarity, receiver polarity, enable or shutdown state, and charge-pump capacitor connections against the manufacturer datasheet. Also verify that the selected cable and connector use the intended RS-232 signal assignments; an electrically compatible transceiver cannot correct a mismatched connector pinout.
Separate the RS-232 connector-side traces from sensitive board regions and connect the interface ground to the chassis or signal ground according to the equipment architecture. High-current return paths should not share narrow traces with the transceiver ground. If the connected cable leaves the enclosure, evaluate connector-side protection and isolation in addition to the device's IEC 1000-4-2 801.2 ESD rating.
Include the ADM3222ARU and its charge-pump capacitors in the 3.3 V rail's worst-case power budget across transmit activity, receive activity, and shutdown. Place local high-frequency decoupling at the device's supply pins and route it with a low-impedance ground return. Startup and shutdown timing should be coordinated with the attached UART so that the host does not interpret an uncontrolled interface state as valid serial data.
מידע על תאימות
The manufacturer documentation identifies EIA-232E, CCITT V.28, and IEC 1000-4-2 compliance. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated and remain unknown.