Analog Devices

ADM3222ARU - 3.3V Dual RS-232 Transceiver | Analog Devices

MPN: ADM3222ARU ✓ Aktif
3.3 V Vdss 20-lead TSSOP Package
MOQ: 1 |

ADM3222ARU Ringkasan

Analog Devices ADM3222ARU is a dual-channel RS-232 transceiver with two drivers and two receivers, operating from a single 3.3 V supply at data rates up to 230 kbps and housed in a 20-lead TSSOP package. The device conforms to the EIA-232E and CCITT V.28 specifications, making it suitable for legacy serial-port equipment, industrial control links, and portable data-acquisition systems.

An RS-232 transceiver is an interface IC that converts logic-level transmit and receive signals into RS-232 line levels and converts incoming RS-232 signals back into CMOS-compatible logic. Within the interface hierarchy, the ADM3222ARU is an RS-232 transceiver, a serial-interface IC, and ultimately a general-purpose semiconductor. Its integrated voltage-doubling and inverter charge-pump circuitry eliminates a separate bipolar power supply when the system already has 3.3 V power.

Key features include two transmit channels, two receive channels, operation from one 3.3 V supply, external 0.1 µF charge-pump capacitors, and integrated enable and shutdown circuitry. The charge-pump approach supports portable and battery-operated equipment by avoiding external RS-232 line-power generation. The interface is intended for data rates up to 230 kbps according to the Analog Devices product page.

The ADM3222 receives and transmits through its charge-pump-generated RS-232 levels, while the enable and shutdown functions provide control over operating state. Four external 0.1 µF capacitors are required for the voltage doubler and inverter. The device is also described as an upgrade path for MAX3222 and MAX3232 designs, with enhanced electrostatic-discharge protection rated to IEC 1000-4-2.

Typical applications include industrial serial adapters, portable test equipment, point-of-sale terminals, instrument-control links, and embedded systems that retain an RS-232 port for compatibility with legacy peripherals. Its single 3.3 V supply is especially useful where a modern controller operates from 3.3 V and adding positive and negative RS-232 rails would increase design complexity.

Place all four 0.1 µF charge-pump capacitors close to their designated pins, keep the RS-232 signal traces away from sensitive analog or high-speed digital paths, and provide local supply decoupling near the device. Confirm the transmitter output levels and receiver thresholds at the system interface because cable length, grounding, and ESD exposure determine whether additional protection or isolation is required.

This page combines the manufacturer's electrical specifications with package-level guidance, interface applications, verified cross-references, and practical layout considerations for engineers evaluating the ADM3222ARU or planning a pin-compatible replacement.

Pilihan pengganti yang segera untuk ADM3222ARU — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

ADM3232EARUZ

✅ Masuk Drop-In
📦 20-lead TSSOP
Maximum data rate increases from 230 kbps to 460 kbps and ESD protection increases from 801.2 to ±15 kV while retaining 3.3 V operation and two transmit/two receive channels.

📋 Alternatif rujukan (tidak dalam katalog)

ADM1385ARU

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 20-lead TSSOP
Same 3.3 V dual RS-232 interface class and 230 kbps family specification, with the principal family difference being the ADM1385 product implementation and control behavior.

📋 Alternatif rujukan (tidak dalam katalog)

MAX3222CPW

✅ Masuk Drop-In
📦 20-lead TSSOP
Retains a 3.3 V dual-driver and dual-receiver RS-232 interface, while the MAX3222 family's maximum data rate and power-control details must be checked against the ADM3222ARU requirements.

📋 Alternatif rujukan (tidak dalam katalog)

ICL3222ECVZ

✅ Masuk Drop-In
📦 20-lead TSSOP
Uses the same 3.3 V and 20-lead TSSOP dual RS-232 interface class, while maximum signaling rate, shutdown implementation, and ESD rating differ from the ADM3222ARU.

📋 Alternatif rujukan (tidak dalam katalog)

ADM3222ARU Spesifikasi

Product Type 2/2 RS-232 transceiver
Number of Drivers 2
Number of Receivers 2
Tegangan Pemberi Arus 3.3 V
Maximum Data Rate 230 kbps
Charge-Pump Capacitor Value 0.1 µF
Number of Charge-Pump Capacitors 4
RS-232 Compliance EIA-232E
RS-232 Compliance CCITT V.28
ESD Protection Standard IEC 1000-4-2
ESD Protection Level 801.2
Enable and Shutdown Circuitry Yes
Kemasan 20-lead TSSOP
Jenis Pemasangan Surface Mount

Panduan Konfigurasi Pin ADM3222ARU 20-lead tssop

Konfigurasi pin untuk ADM3222ARU (20-lead tssop pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 20-lead tssop untuk ADM3222ARU

Tiada data garisan pin yang diperoleh untuk ADM3222ARU.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ADM3222ARU patut untuk 6 aplikasis: Portable RS-232 Serial Adapter, Industrial Instrument Control Link, Point-of-Sale Terminal Interface, Embedded Data-Acquisition System, Legacy Serial Console Access, Portable Test and Measurement Equipment.

📱

Portable RS-232 Serial Adapter

The ADM3222ARU fits portable serial adapters because it combines two transmit channels, two receive channels, and a single 3.3 V supply in a 20-lead TSSOP package. Its four external 0.1 µF charge-pump capacitors generate the RS-232 line voltage internally, reducing the need for a separate negative supply. The manufacturer specifies operation up to 230 kbps and EIA-232E and CCITT V.28 conformance. In a battery-powered design, the enable and shutdown circuitry can reduce power consumption when the port is inactive, although the complete power budget should also include controller and cable-load requirements.

🏭

Industrial Instrument Control Link

The ADM3222ARU is appropriate for connecting a modern controller to legacy instrumentation that uses RS-232. Its 3.3 V operation permits use in a modern embedded control system without generating external positive and negative rails, while the 230 kbps maximum rate covers common serial-port protocols and lower-speed diagnostic channels. Two driver and two receiver channels provide useful bidirectional connectivity. Place the charge-pump capacitors close to their assigned pins, isolate receive paths from noisy equipment, and verify grounding and cable length at the connector because RS-232 performance depends on the complete signal path rather than only the IC.

🖥️

Point-of-Sale Terminal Interface

The ADM3222ARU can support point-of-sale equipment that retains an RS-232 peripheral port while the main terminal electronics operate from 3.3 V. Two transmitters and two receivers allow simultaneous connection to more than one serial peripheral, subject to protocol timing and system requirements. The single-supply charge-pump design simplifies board-level power planning, and the integrated shutdown function allows the interface to be disabled when no transaction traffic is present. For exposed retail equipment, add connector-side surge and ESD protection as required by the installation environment rather than assuming the transceiver rating alone protects the complete port.

🧩

Embedded Data-Acquisition System

The ADM3222ARU is useful in embedded data-acquisition units that must communicate with older laboratory equipment or industrial sensors. Operating from 3.3 V aligns with many embedded processors and reduces external power-conversion stages, while the 20-lead TSSOP package supports compact layouts. The 230 kbps limit is suitable for many command and control protocols, but the system designer must ensure that protocol timing, parity, flow control, and cable capacitance remain within acceptable limits. Use a solid common ground and route the receive traces away from switching supplies and clocked digital circuits to avoid introducing errors into acquired data.

🔧

Legacy Serial Console Access

The ADM3222ARU supports legacy serial-console access when a modern processor or single-board computer must remain compatible with existing RS-232 peripherals. A single 3.3 V rail simplifies integration with embedded logic, and the integrated shutdown control can disable the interface during low-power states. The EIA-232E and CCITT V.28 compliance provides a defined basis for interoperable signaling. Designers should verify the UART logic levels, connector gender, signal assignment, and cable topology, because the transceiver being electrically compatible does not guarantee that every legacy cable uses the same pin arrangement.

📡

Portable Test and Measurement Equipment

The ADM3222ARU is appropriate for portable test equipment that communicates with analyzers, meters, or service computers over RS-232. Its low-voltage supply operation aligns with compact battery-powered instruments, and the shutdown function supports power conservation between measurement cycles. The 230 kbps maximum data rate supports many legacy instrument-control protocols. Designers should budget capacitor board area for the four 0.1 µF charge-pump capacitors, use a low-noise ground plane, and keep transmit and receive paths physically separated where long cables or nearby switching circuitry could introduce coupling.

What are the key specifications of ADM3222ARU that engineers should know?
The ADM3222ARU is a 3.3 V, dual-driver and dual-receiver RS-232 transceiver that supports data rates up to 230 kbps in a 20-lead TSSOP package. According to the Analog Devices ADM3222 product page, the device conforms to EIA-232E and CCITT V.28, uses four external 0.1 µF charge-pump capacitors, and includes enable and shutdown circuitry. These characteristics make it appropriate for legacy RS-232 links powered from a modern 3.3 V system.
Where can I download the ADM3222ARU datasheet PDF?
The official ADM3222ARU technical information is available from Analog Devices through the ADM3222 product page at https://www.analog.com/en/products/adm3222.html. The manufacturer page provides the authoritative device description and links to its documentation. Use the manufacturer document for final pin assignments, electrical limits, timing characteristics, recommended charge-pump capacitors, and operating-temperature limits before releasing a production schematic.
Where can I find the ADM3222ARU pinout?
The ADM3222ARU pinout is documented in the Analog Devices ADM3222 family datasheet associated with the official product page. The part uses a 20-lead TSSOP package, with pins dedicated to two transmit outputs, two receive inputs, power, ground, enable or shutdown control, and four external charge-pump capacitors. Assign PCB nets directly from the datasheet pin-description table and the package drawing rather than relying on a third-party diagram.
What is the difference between ADM3222ARU and ADM3232EARUZ?
The ADM3232EARUZ is a 3.3 V, 20-lead TSSOP, two-driver and two-receiver RS-232 device that can serve as a functional replacement for the ADM3222ARU when its control and protection behavior is acceptable. According to the comparison information for these parts, both operate from 3.3 V and provide 460 kbps-class RS-232 operation, while the ADM3232EARUZ adds enhanced ±15 kV ESD protection. Verify the detailed pin functions and timing limits before substitution.
What can replace ADM3222ARU as a drop-in part?
The ADM3232EARUZ is the closest identified drop-in candidate because it uses a 20-lead TSSOP package, operates from 3.3 V, and retains two transmit and two receive channels. The MAX3222CPW and ICL3222ECVZ are also pin-compatible 20-lead TSSOP candidates in the same RS-232 interface class. Because shutdown behavior, data-rate limits, charge-pump capacitor values, and ESD ratings can differ, compare the manufacturer pin and parameter tables before approving a replacement.
Can ICL3222ECVZ replace ADM3222ARU in a 3.3V design?
The ICL3222ECVZ can be considered for a 3.3 V, 20-lead TSSOP RS-232 design, but it should not be treated as an automatic substitution. Both devices occupy the same broad package and provide two transmit and two receive channels. The relevant differences include maximum signaling rate, shutdown control, charge-pump capacitor requirements, and ESD protection. Confirm those parameters and compare every numbered terminal against the original PCB layout.
When should I choose ADM3222ARU over MAX3222CPW?
Choose the ADM3222ARU when the design benefits from its Analog Devices family integration, 3.3 V operation, EIA-232E and CCITT V.28 conformance, and integrated enable and shutdown control. MAX3222CPW is appropriate when its own data-rate, shutdown, charge-pump, and ESD specifications are preferred or when an existing MAX3222-compatible PCB is already qualified. The decision should follow a complete pin and parameter comparison rather than package appearance alone.
Is ADM3222ARU suitable for a battery-powered serial adapter?
The ADM3222ARU is suitable for many battery-powered serial adapters because it operates from a single 3.3 V supply and includes low-power shutdown functionality. Its four external 0.1 µF charge-pump capacitors generate the bipolar voltage required for RS-232 transmission, removing the need for a separate negative supply in many portable designs. The complete power budget should still include the load current, charge-pump losses, and the selected external capacitors.
Does ADM3222ARU need negative power for RS-232 operation?
The ADM3222ARU does not require an external negative supply for normal RS-232 operation. Its internal voltage-doubling and inverter charge-pump circuit generates the required bipolar voltage from the single 3.3 V supply, using four external 0.1 µF capacitors as stated by Analog Devices. PCB layout should minimize capacitor-loop area and keep the charge-pump nodes away from sensitive signal paths.
What is the best Analog Devices equivalent for ADM3222ARU?
The ADM3232EARUZ is the strongest identified Analog Devices alternative for an ADM3222ARU design because both use a 20-lead TSSOP package, a 3.3 V supply, and two RS-232 transmit and receive channels. It adds enhanced ±15 kV ESD protection according to the comparison information. Review shutdown polarity, enable timing, data rate, charge-pump capacitor values, and every pin function before treating it as a drop-in replacement.
How does ADM3222ARU compare with ADM3222ARUZ?
ADM3222ARUZ is an ordering designation within the ADM3222 family and refers to a lead-free termination or packaging configuration of the same core RS-232 device. The electrical function, 20-lead TSSOP package, 3.3 V supply architecture, and charge-pump implementation remain associated with the ADM3222 family. Confirm the exact ordering code, surface-mount form, and availability with the manufacturer before substituting one suffix for another.
Is ADM3222ARU in stock?
Current stock status changes by channel and should be checked through the Request a Quote form on this page. The ADM3222ARU is listed as an active Analog Devices product, and the manufacturer product page remains the authoritative source for lifecycle and technical information. Submit the required quantity, package suffix, and target date with the quote request to obtain current availability and lead-time confirmation.
What is the price of ADM3222ARU?
The current commercial price for ADM3222ARU depends on order quantity, package suffix, inventory, and sourcing conditions. Use the Request a Quote form on this page to request the latest price and availability for the exact ADM3222ARU ordering code. Providing the target quantity and required delivery date allows the quote desk to return an actionable commercial response without relying on a stale catalog figure.
Where can I buy ADM3222ARU online?
Purchase inquiries for ADM3222ARU can be submitted through the Request a Quote form on this page. The form supports an exact-MPN request for the 20-lead TSSOP device and helps establish current unit availability, lead time, and order multiples. Confirm the requested suffix and date code with the supplier before approving the purchase order.
What is the lead time for ADM3222ARU?
The lead time for ADM3222ARU depends on current factory and distribution inventory, order quantity, and whether a date-code or traceability requirement applies. Request the current lead time through the Request a Quote form on this page and include the required quantity and target delivery date. The manufacturer product page is the best starting point for confirming the active device status.
How should the ADM3222ARU charge-pump capacitors be placed?
Place the four required 0.1 µF charge-pump capacitors close to the pins identified in the Analog Devices datasheet, keeping each capacitor connection loop as short as practical. Route the resulting charge-pump nodes away from RS-232 receive inputs, clocks, analog signals, and sensitive digital traces. Add local supply decoupling and provide an uninterrupted ground reference beneath and around the interface circuit.

Data referensi kejuruteraan untuk ADM3222ARU — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the ADM3222ARU when designing a new 3.3 V RS-232 interface that requires two transmit and two receive channels, operation up to 230 kbps, and integrated shutdown control. It is particularly suitable for portable equipment, legacy industrial instruments, and embedded systems that need EIA-232E and CCITT V.28 signaling without an external bipolar supply. Select the ADM3232EARUZ when the design benefits from 460 kbps operation or stronger ±15 kV ESD protection and the revised control and timing characteristics remain acceptable. Consider MAX3222CPW for an existing MAX3222-compatible design after checking data rate and shutdown requirements. Consider ICL3222ECVZ when its electrical limits meet the system requirement and mixed-manufacturer sourcing is acceptable. In every case, verify pin functions, charge-pump capacitor values, enable polarity, receive thresholds, and package dimensions before approving a substitution.

Perbandingan dengan Gantian

Parametr Produk Ini ADM3232EARUZ ADM1385ARU MAX3222CPW ICL3222ECVZ
Package 20-lead TSSOP 20-lead TSSOP 20-lead TSSOP 20-lead TSSOP 20-lead TSSOP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Renesas Electronics
Product Type 2/2 RS-232 transceiver 2/2 RS-232 transceiver RS-232 interface device RS-232 transceiver RS-232 transceiver
Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V
Driver and Receiver Channels 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers

Penyeberangsung Jelas

  • Direct 3.3 V operation with integrated bipolar charge-pump generation (vsMAX3222CPW)
  • Higher signaling-rate option with enhanced ESD protection (vsADM3232EARUZ)
  • Native Analog Devices family with integrated power control (vsICL3222ECVZ)

Catatan Desain

Place the four required 0.1 µF charge-pump capacitors adjacent to their assigned ADM3222ARU pins and minimize the area of each capacitor loop. Keep the generated charge-pump nodes away from RS-232 receiver inputs, clock signals, precision analog traces, and long parallel digital runs. A continuous ground plane beneath the device helps control return currents, while separating transmit and receive routing reduces susceptibility to cable-borne transients.

Do not treat the ADM3222ARU as a direct TTL-to-RS-232 logic translator. Confirm the numbered pin functions, transmit polarity, receiver polarity, enable or shutdown state, and charge-pump capacitor connections against the manufacturer datasheet. Also verify that the selected cable and connector use the intended RS-232 signal assignments; an electrically compatible transceiver cannot correct a mismatched connector pinout.

Separate the RS-232 connector-side traces from sensitive board regions and connect the interface ground to the chassis or signal ground according to the equipment architecture. High-current return paths should not share narrow traces with the transceiver ground. If the connected cable leaves the enclosure, evaluate connector-side protection and isolation in addition to the device's IEC 1000-4-2 801.2 ESD rating.

Include the ADM3222ARU and its charge-pump capacitors in the 3.3 V rail's worst-case power budget across transmit activity, receive activity, and shutdown. Place local high-frequency decoupling at the device's supply pins and route it with a low-impedance ground return. Startup and shutdown timing should be coordinated with the attached UART so that the host does not interpret an uncontrolled interface state as valid serial data.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The manufacturer documentation identifies EIA-232E, CCITT V.28, and IEC 1000-4-2 compliance. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated and remain unknown.

Pencarian Berhubungan

ADM3222ARU datasheet ADM3222ARU pinout ADM3222ARU datasheet pdf ADM3222ARU replacement ADM3222ARU equivalent ADM3222ARU cross reference ADM3222ARU vs ADM3232EARUZ ADM3222ARU 3.3V RS-232 ADM3222ARU 20-TSSOP ADM3222ARU price ADM3222ARU stock Analog Devices ADM3222ARU ADM3222ARU RS-232 transceiver ADM3222ARU application circuit

Komponen dan Tanda berkaitan

Analog Devices ADM3222ARU ADM3232EARUZ ADM1385ARU MAX3222CPW ICL3222ECVZ RS-232 RS-232 transceiver line driver line receiver interface IC semiconductor EIA-232E CCITT V.28 IEC 1000-4-2 RoHS REACH AEC-Q100 3.3 V power supply charge-pump capacitor voltage doubler voltage inverter 20-lead TSSOP TSSOP family surface-mount package 230 kbps RS-232 line driver RS-232 line receiver
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ