Texas Instruments

ADS8557IPM - 14-Bit 6-Channel Simultaneous ADC | Texas Instruments

料号: ADS8557IPM ✓ 量产中
64-pin LQFP (PM) Package
最小起订量: 1 |

ADS8557IPM 概述

The Texas Instruments ADS8557IPM is a 14-bit, 6-channel simultaneous-sampling successive approximation register ADC operating at 670 kSPS in a 64-pin LQFP (PM) package. The device accepts true-bipolar analog inputs and supports parallel or serial data transfer for flexible connection to processors, FPGAs, and data-acquisition systems.

An analog-to-digital converter converts continuous analog voltage into a numeric representation for measurement, control, or signal processing. A simultaneous-sampling ADC includes a dedicated sample-and-hold circuit on each channel, allowing all six inputs to be captured at the same instant. This architecture is valuable when phase relationships between multiple sensor, voltage, or current signals must be preserved. Within the broader hierarchy, the ADS8557IPM is a data-converter IC, an ADC, and a SAR-based precision acquisition component.

Key features include 14-bit resolution, six simultaneously sampled channels, a 670 kSPS conversion rate, and true-bipolar input support. Its parallel interface can operate at rates up to 730 kSPS across the ADS855x family, while serial operation supports rates up to 500 kSPS. The -40°C to +125°C operating range supports industrial and extended-temperature equipment, and the 10 mm by 10 mm LQFP package provides 64 pins for analog, digital, reference, power, and interface connections.

The SAR conversion architecture repeatedly performs successive approximation and binary weighting during each conversion. Its six-channel structure prevents timing skew between channels by sampling the analog inputs simultaneously rather than multiplexing one converter across multiple inputs. The parallel interface can reduce external interface complexity in high-throughput embedded systems, while the serial interface can reduce the number of data lines required when board space or routing density is more important than maximum transfer rate.

Typical applications include synchronized industrial process monitoring, multichannel instrumentation, power-system analysis, factory automation, vibration and condition monitoring, and laboratory data acquisition. The six true-bipolar channels are especially useful when several transducer outputs must be measured against a common reference at a single instant, allowing engineers to compare channel amplitudes without introducing sequential-sampling skew.

PCB design should place input, reference, and decoupling components close to their associated pins while preserving short, controlled digital return paths. Use the manufacturer pin-description table when assigning the 64 package connections, and follow the recommended power-supply and reference-layout guidance for analog and digital sections. Adequate filtering and grounding are important because acquisition accuracy depends on clean references, low-noise supplies, and minimized coupling between sensitive analog inputs and the parallel output bus.

This page combines manufacturer specifications, interface-rate context, packaging information, drop-in family alternatives, and practical design guidance. It is intended to help engineers evaluate the ADS8557IPM for simultaneous multi-channel acquisition while accounting for resolution, throughput, thermal range, interface selection, and PCB implementation constraints.

直接替换替代料: ADS8557IPM ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: ADS8557IPM (相同外形与封装尺寸) ——差异在于 Operating Temperature Range.

Texas Instruments
Operating Temperature Range: -40 °C to +125 °C
对比 ADS8557IPM →

ADS8556IPM

✅ 直接替换 ⚠️ 规格未核验
Texas Instruments
📦 LQFP-64 (PM)
16 bit · 6 channels · Simultaneous sampling · Six SAR ADCs grouped in three pairs · 630 kSPS per channel · 450 kSPS per channel · Parallel and serial · Yes

联系询价

查看数据手册 →

ADS8558IPM

✅ 直接替换 ⚠️ 规格未核验
Texas Instruments
📦 LQFP-64 (PM)
12 bit · 6 channels · Successive approximation register (SAR) · 730 kSPS per channel · 500 kSPS per channel · True bipolar · Simultaneous sampling · One per channel

联系询价

查看数据手册 →

ADS8557IPM 最大额定值与电气特性

ADC Resolution 14 bit
Number of Channels 6 channels
Conversion Rate 670 kSPS
Architecture Successive approximation register (SAR)
Sampling Type Simultaneous sampling with per-channel sample-and-hold
Input Type True bipolar
Maximum Parallel Interface Data Rate 730 kSPS
Maximum Serial Interface Data Rate 500 kSPS
Interface Options Parallel and serial
工作温度范围 -40°C to +125°C
封装 64-pin LQFP (PM)
Package Dimensions 10 mm x 10 mm
引脚数量 64 pins
安装类型 Surface mount

ADS8557IPM 10 mm x 10 mm 引脚配置指南

ADS8557IPM(10 mm x 10 mm 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

ADS8557IPM 的 10 mm x 10 mm 封装引脚图

暂无详细引脚数据: ADS8557IPM.

请参阅 数据手册 以查看完整引脚配置。

典型应用

ADS8557IPM 适用于 6 应用s: Synchronized Industrial Process Monitoring, Multichannel Power-System Analysis, Vibration and Condition Monitoring, Laboratory Data-Acquisition Systems, Factory Automation Control, Test and Measurement Instrumentation.

🏭

Synchronized Industrial Process Monitoring

The ADS8557IPM fits six-channel process measurement because all six true-bipolar inputs are sampled simultaneously rather than selected sequentially. At 670 kSPS with 14-bit resolution, the converter captures rapidly changing pressure, voltage, temperature, and current signals while preserving their relative timing. A parallel interface can support the higher-throughput mode, while a serial interface reduces data-line count in distributed monitoring equipment. For a factory control cabinet, the -40°C to +125°C rating supports operation across industrial temperature conditions. Place reference and bypass components close to the device, isolate sensitive input routes from digital outputs, and validate channel scaling before applying process thresholds.

⚡

Multichannel Power-System Analysis

The ADS8557IPM is suitable for synchronously measuring voltage and current signals in three-phase or multi-branch power systems. Six simultaneous channels allow engineers to compare phase-related quantities at one sampling instant, reducing errors that can arise from sequential multiplexing. The 14-bit code width provides 16,384 discrete levels per channel, while the 670 kSPS conversion rate supports detailed transient analysis. The LQFP package also leaves separate routing resources for parallel outputs, references, and analog inputs. Engineers should choose input scaling and protection appropriate to the measured bus voltage, keep the analog reference quiet, and confirm that the selected interface can transfer conversion results without data corruption.

🔧

Vibration and Condition Monitoring

The ADS8557IPM supports vibration analysis systems that must acquire several accelerometer or transducer channels with consistent timing. Simultaneous sampling removes the acquisition offset that would occur if six channels were measured one after another, making phase and amplitude comparisons more meaningful. The 670 kSPS rate captures high-frequency content, and the 14-bit resolution reduces quantization error relative to a 12-bit implementation. For an industrial monitoring system, route each sensor through suitable conditioning and anti-alias filtering before the ADC. Keep the analog input paths compact and use a stable reference and decoupled supply. The -40°C to +125°C specification also supports equipment installed in thermally variable locations.

📊

Laboratory Data-Acquisition Systems

The ADS8557IPM is appropriate for a six-input laboratory instrument that compares changing voltages with shared time references. Its simultaneous-sampling architecture preserves relationships among probes, and its 14-bit resolution provides a practical balance between dynamic range, conversion speed, and data volume. The 670 kSPS rate is useful for waveform capture rather than only slow instrumentation, while parallel and serial interfaces let the designer balance throughput against board complexity. Use the serial option when routing to a compact microcontroller is preferable, and choose parallel mode when a processor or FPGA can accept the faster output cadence. Proper grounding, reference stability, and input filtering remain central to obtaining repeatable measurements.

🏭

Factory Automation Control

The ADS8557IPM can serve as the acquisition stage in factory automation equipment that monitors several actuator or sensor lines. Six synchronized channels reduce temporal uncertainty when a controller evaluates process relationships, and the 670 kSPS rate permits faster feedback than a low-rate general-purpose ADC. The -40°C to +125°C operating range suits industrial environments, while the 64-pin LQFP package supports separate analog, reference, control, and data nets. A serial interface may simplify connection to a controller with limited I/O, whereas parallel output is advantageous for a high-throughput FPGA data path. Designers should include input protection, verify reference settling after startup, and test timing across the full operating-temperature range.

🧰

Test and Measurement Instrumentation

The ADS8557IPM supports test equipment that must digitize several rails, nodes, or sensor outputs during a measurement sequence. Simultaneous sampling is valuable when the instrument compares channel values at one defined instant, and the 14-bit resolution avoids using the smallest quantization intervals unless the application truly requires them. The 670 kSPS rate accommodates repetitive waveform tests while keeping captured data manageable. Use the parallel interface with an FPGA or dedicated data mover when samples must be transferred continuously; use the serial interface for lower pin-count implementations. Apply the manufacturer’s decoupling and layout guidance, isolate clock and digital return paths, and account for reference and input-noise limits when setting the measurement gain.

What is the ADS8557IPM?
The ADS8557IPM is a 14-bit, 6-channel, simultaneous-sampling SAR analog-to-digital converter from Texas Instruments. It converts true-bipolar analog inputs at up to 670 kSPS and provides parallel or serial interfaces in a 64-pin LQFP (PM) package. According to the manufacturer datasheet, each channel has its own sample-and-hold circuit, allowing all six analog inputs to be captured at the same instant rather than sequentially multiplexed.
How many channels and bits does the ADS8557IPM have?
The ADS8557IPM has six simultaneous input channels and a resolution of 14 bits. Texas Instruments identifies the device as a six-channel, true-bipolar ADC based on successive approximation register technology. Its per-channel sample-and-hold architecture is significant because it preserves the relative timing of acquired signals, making the device suitable for synchronized measurements across multiple sensors.
What is the sampling rate of the ADS8557IPM?
The ADS8557IPM supports a maximum aggregate conversion rate of 670 kSPS. According to Texas Instruments, the wider ADS855x family can operate up to 730 kSPS with the parallel interface and up to 500 kSPS with the serial interface. The chosen interface therefore affects available bus throughput and the number of external data connections required by the system.
Where can I download the ADS8557IPM datasheet PDF?
The official ADS8557 datasheet and supporting documents are available from the Texas Instruments ADS8557 product page at https://www.ti.com/product/ADS8557. Use the manufacturer pin-description table, electrical-characteristics table, and application guidance when planning the 64-pin LQFP layout. The product page also links the ADS8557IPM ordering information, which identifies the 670 kSPS, 14-bit, six-channel configuration.
Where is the ADS8557IPM pinout located?
The ADS8557IPM pinout is shown in the pin-configuration section of the Texas Instruments ADS8557 datasheet. The device uses a 64-pin LQFP (PM) package, and the datasheet identifies analog inputs, power connections, reference pins, control signals, and data-interface functions. Use that table when assigning PCB nets because the IPM ordering code is a tray version of the 64-pin device.
What are the key specifications of ADS8557IPM that engineers should know?
The ADS8557IPM combines 14-bit resolution, six simultaneous-sampling channels, and a 670 kSPS conversion rate with true-bipolar inputs. It supports parallel and serial interfaces, operates from -40°C to +125°C, and uses a 64-pin, 10 mm by 10 mm LQFP package. Texas Instruments describes the device as a low-power SAR ADC family member designed for high-speed, multichannel signal acquisition.
Does the ADS8557IPM support simultaneous sampling?
Yes, the ADS8557IPM supports true simultaneous sampling across all six analog channels. Each channel contains a sample-and-hold circuit, so the input voltages are captured at the same time before conversion proceeds. According to the manufacturer datasheet, this differs from a multiplexer-based ADC and avoids acquisition skew when engineers compare multiple waveforms or sensor outputs.
Can ADS8557IPM replace ADS8556IPM?
The ADS8556IPM is a same-family, pin-compatible alternative, but it provides 16-bit resolution instead of the ADS8557IPM's 14 bits. Both parts use the 64-pin LQFP (PM) package and belong to the six-channel simultaneous-sampling ADS855x family. Choose the ADS8556IPM when greater numerical resolution is worth the additional conversion burden; verify scaling and calibration during firmware changes.
What can replace the ADS8557IPM on the same PCB footprint?
The closest same-family drop-in choices are the ADS8556IPM and ADS8558IPM, both in the 64-pin LQFP (PM) package and based on the six-channel simultaneous-sampling ADS855x architecture. The ADS8556IPM increases resolution to 16 bits, while the ADS8558IPM reduces it to 12 bits. Confirm the analog range, reference voltage, interface mode, and calibration expectations before replacing the ADS8557IPM.
When should I choose ADS8557IPM instead of ADS8558IPM?
Choose the ADS8557IPM when 14-bit resolution is sufficient but greater precision than the ADS8558IPM is desirable. The ADS8558IPM uses 12-bit resolution, a difference of 2 bits or approximately 4 times the nominal quantization step of the ADS8557IPM. The choice should follow input-noise levels, required calibration accuracy, and system bandwidth rather than maximum resolution alone.
Is AD7657BSTZ a drop-in replacement for ADS8557IPM?
No. The AD7657BSTZ is a different 16-bit multichannel ADC, while the ADS8557IPM is a 14-bit six-channel simultaneous-sampling SAR converter. Although both are associated with 64-pin LQFP-class packages, matching package dimensions does not establish pin-by-pin compatibility. Use the manufacturer pin tables and interface timing requirements before considering any cross-brand substitution.
What is the best Analog Devices equivalent for ADS8557IPM?
No verified pin-to-pin Analog Devices equivalent was identified for the ADS8557IPM. The AD7657BSTZ appears in comparison searches, but it differs in resolution and converter architecture, and package similarity alone does not prove drop-in compatibility. Treat it as a functional comparison rather than a replacement; a board redesign or interface adaptation may be required if it is selected.
Where can I buy ADS8557IPM online?
Use the Request a Quote form on this page to request the current ADS8557IPM order, packaging, and delivery information without relying on a static listing. The Texas Instruments product page identifies ADS8557IPM as a 670 kSPS, 14-bit, six-channel simultaneous-sampling ADC in the 64-pin LQFP (PM) package. The form is the appropriate channel for confirming current availability and any volume requirements.
What is the price of ADS8557IPM?
The current ADS8557IPM price should be requested through the Request a Quote form on this page. Pricing can vary with quantity, packaging, and current component availability, so a static amount would not represent a reliable quotation. The form allows the requested quantity and delivery requirements to be included while preserving a direct transaction path for this exact 64-pin LQFP orderable part.
What is the lead time and stock status of ADS8557IPM?
Current lead time and stock status should be confirmed through the Request a Quote form on this page. Texas Instruments lists ADS8557IPM as an orderable configuration, but manufacturing and inventory status can vary by volume and delivery schedule. Submit the required quantity, target date, and shipment destination so the order can be evaluated against the latest component availability.

工程参考数据: ADS8557IPM ——对比、设计指导和合规信息。

选型指南

Choose the ADS8557IPM for six-channel systems that need simultaneous sampling, true-bipolar inputs, and a practical balance between resolution and throughput. Its 14-bit conversion format provides more precision than the ADS8558IPM without requiring the larger digital words of the 16-bit ADS8556IPM, while retaining the same 64-pin LQFP (PM) family layout. Select ADS8556IPM when the highest available family resolution is more important than conversion and data-volume cost. Select ADS8558IPM when lower resolution is acceptable and simpler processing or smaller output words are priorities. Neither family member should replace the target without checking analog range, reference requirements, interface timing, and firmware scaling. Cross-brand parts should be considered only after their exact pin assignments and electrical limits have been compared with the manufacturer tables.

与替代料对比

参数 本产品 ADS8556IPM ADS8558IPM
Package LQFP-64 (PM) LQFP-64 (PM) LQFP-64 (PM)
Brand Texas Instruments Texas Instruments Texas Instruments
Resolution 14 bit 16 bit 12 bit
Number of Channels 6 channels 6 channels 6 channels
Conversion Architecture SAR ADC SAR ADC SAR ADC
Maximum Conversion Rate 670 kSPS 670 kSPS 670 kSPS
Input Type True bipolar True bipolar True bipolar
Interface Parallel and serial Parallel and serial Parallel and serial
Operating Temperature Range -40°C to +125°C -40°C to +125°C -40°C to +125°C
Sampling Method Simultaneous sampling Simultaneous sampling Simultaneous sampling

关键差异点

  • Balanced 14-bit resolution (对比 ADS8558IPM)
  • Lower conversion overhead than the 16-bit family option (对比 ADS8556IPM)
  • True simultaneous acquisition across six channels (对比 AD7657BSTZ)
  • Interface choice matched to system bandwidth (对比 ADS8556IPM)

设计说明

Follow the manufacturer’s analog, digital, and reference pin-group layout for the 64-pin LQFP. Place input filtering, reference-decoupling, and supply-bypass components adjacent to the relevant pins, and keep analog input traces away from the parallel output bus. The six simultaneous channels make timing alignment valuable, but they do not eliminate channel-to-channel crosstalk; routing and grounding remain part of the accuracy budget.

Use the decoupling and supply sequencing specified by the manufacturer for both analog and digital supply pins. Stable reference voltage is essential because conversion accuracy depends on the reference. Check the recommended operating range of every supply rail before connecting external circuitry, and use local bulk storage where the source can exhibit transient or high-frequency ripple. A clean regulator alone does not compensate for an inadequately bypassed package.

Choose the parallel interface for maximum throughput, but account for clock-edge requirements, output timing, and the number of digital nets crossing the board. The serial interface reduces routing demand but limits the family’s serial transfer rate to 500 kSPS. Keep digital clocks and data away from reference and analog inputs, and use a continuous ground reference for high-speed return currents.

Do not infer that every 64-pin LQFP ADC is interchangeable with the ADS8557IPM. The AD7657BSTZ has different resolution and converter characteristics, while an ADS8556IPM or ADS8558IPM changes the numerical scaling by 2 bits in opposite directions. Before replacing the device, verify pin functions, input range, reference voltage, interface timing, power sequence, and firmware scaling.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The manufacturer product information identifies an extended-temperature industrial ADC but does not provide explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statements.

相关搜索

ADS8557IPM datasheet ADS8557IPM pinout ADS8557IPM datasheet pdf Texas Instruments ADS8557IPM ADS8557 14 bit ADC ADS8557IPM 670 kSPS ADS8557IPM LQFP-64 pinout ADS8557IPM simultaneous sampling ADS8557IPM drop-in replacement ADS8557IPM vs ADS8556IPM ADS8557IPM vs AD7657BSTZ ADS8557IPM price ADS8557IPM stock ADS8557IPM equivalent ADS8557IPM application circuit

相关元器件 & 术语

Texas Instruments ADS8557IPM ADS8557 ADS8556IPM ADS8558IPM AD7657BSTZ Analog-to-digital converter ADC successive approximation register SAR ADC simultaneous-sampling ADC data-converter IC true-bipolar input sample-and-hold circuit 14-bit resolution 670 kSPS parallel interface serial interface LQFP-64 PM package surface mount industrial process monitoring power-system analysis vibration monitoring RoHS
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情