Microchip Technology

AT90CAN32-15AT - 32KB AVR CAN MCU, 15MHz | Microchip Technology

料号: AT90CAN32-15AT ✓ 量产中
4.5 V to 5.5 V Vdss 64-pin TQFP, 14 mm x 14 mm Package 15 MHz Speed 32 KB Memory
最小起订量: 1 |

AT90CAN32-15AT 概述

The Microchip Technology AT90CAN32-15AT is an 8-bit AVR RISC automotive microcontroller with a 15 MHz maximum clock, 32 KB of flash memory, and an integrated CAN controller in a 64-pin TQFP package. It operates from 4.5 V to 5.5 V and provides 53 general-purpose I/O lines for automotive and industrial CAN-node designs.

An automotive microcontroller is a dedicated semiconductor that combines a processor core, nonvolatile program memory, data memory, peripheral controllers, and communication interfaces on one integrated circuit. The AT90CAN32 belongs to the AVR 8-bit RISC family, with the CAN controller placing it within the broader embedded-control and CAN-node product hierarchy. Its architecture combines an 8-bit data bus with an enhanced RISC instruction set designed for efficient control-oriented processing.

Key features include 32 KB of flash program memory, 2 KB of SRAM, 1 KB of EEPROM, 53 general-purpose I/O lines, 32 general-purpose working registers, and 133 powerful instructions. The integrated CAN controller supports CAN 2.0A and CAN 2.0B protocols, allowing the device to communicate with other CAN nodes without an external protocol controller. The 15 MHz operating speed provides a practical balance between processing throughput, power consumption, and system responsiveness.

The AT90CAN32-15AT uses an 8-bit AVR RISC architecture with read-while-write flash capability. Its memory organization supports embedded firmware, configuration data, and nonvolatile calibration or parameter storage. The CAN peripheral, general-purpose I/O, timers, and serial interfaces allow a single controller to supervise a vehicle or industrial subsystem while handling communications and time-critical control tasks.

Typical applications include automotive body-control modules, dashboard and instrument-cluster electronics, diagnostic equipment, industrial CAN gateways, embedded CAN sensors, and service equipment. The 64-pin TQFP package provides access to 53 I/O lines, making the device suitable for systems that need more peripheral connectivity than a smaller microcontroller package can offer.

For PCB design, use the pin-description table in the Microchip Technology datasheet when assigning tracks and decoupling. Provide the specified supply voltage at every power pin, route CAN RX and TX according to the recommended transceiver interface, and include adequate local bypass capacitance to limit supply transients.

This page consolidates the device identity, operating limits, package details, drop-in family alternatives, application guidance, and design notes needed for initial component selection. Firmware migration should still be validated against the manufacturer datasheet, errata, CAN timing requirements, and the exact automotive qualification criteria required by the end application.

直接替换替代料: AT90CAN32-15AT ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: AT90CAN32-15AT (相同外形与封装尺寸) ——差异在于 Package, Flash Memory, CAN Controller, Maximum Clock Frequency, Product Type.

Microchip Technology
Package: 64-TQFP
Maximum Clock Frequency: 15 MHz
对比 AT90CAN32-15AT →
Microchip Technology
Package: 64-pin TQFP (1.0 mm height)
对比 AT90CAN32-15AT →
Microchip Technology
Package: 64-TQFP (14 mm x 14 mm)
Flash Memory: 32 KB (32K x 8)
CAN Controller: CAN V2.0A and CAN V2.0B
对比 AT90CAN32-15AT →

AT90CAN32-15AT1

✅ 直接替换
Microchip Technology
📦 64-pin TQFP (14 mm x 14 mm)
8-bit RISC MCU · AVR · 15 MHz · 32 KB · 1 KB · 2 KB · 53 lines · 32 registers

联系询价

查看数据手册 →

AT90CAN32-16AT

✅ 直接替换 ⚠️ 规格未核验
📦 64-pin TQFP (14 mm x 14 mm)
Maximum clock increases from 15 MHz to 16 MHz, a 6.7% increase; memory, CAN capability, and 64-pin TQFP interface remain aligned with the AT90CAN32 family.

📋 参考替代料(不在目录中)

AT90CAN32-16AU

✅ 直接替换 ⚠️ 规格未核验
Microchip Technology
📦 64-pin TQFP (14 mm x 14 mm)
8-bit AVR RISC microcontroller with CAN controller · 16 MHz · 32 KB (32K x 8) · 2 KB · 1 KB · 53 lines · 32 registers · 2.7 V to 5.5 V

联系询价

查看数据手册 →

AT90CAN32-15AU

✅ 直接替换 ⚠️ 规格未核验
📦 64-pin TQFP (14 mm x 14 mm)
Same 15 MHz clock, memory configuration, and 64-pin TQFP footprint; the -AU ordering code is the alternative package or temperature ordering option.

📋 参考替代料(不在目录中)

AT90CAN32-15AT 最大额定值与电气特性

Product Type 8-bit automotive AVR RISC microcontroller
Maximum Clock Speed 15 MHz
Flash Memory 32 KB
EEPROM Memory 1 KB
SRAM 2 KB
General-Purpose I/O Lines 53 lines
General-Purpose Working Registers 32 registers
Instruction Set 133 powerful instructions
数据总线宽度 8 bit
CAN Controller CAN 2.0A and CAN 2.0B
工作电源电压 4.5 V to 5.5 V
工作温度范围 -40C to +85C
封装 64-pin TQFP, 14 mm x 14 mm
Package Height 1 mm
安装类型 Surface mount
Packing Media Tape and reel, 1000 units
Country of Origin Taiwan
Lifecycle Stage Active

AT90CAN32-15AT 1 mm 引脚配置指南

AT90CAN32-15AT(1 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

AT90CAN32-15AT 的 1 mm 封装引脚图

暂无详细引脚数据: AT90CAN32-15AT.

请参阅 数据手册 以查看完整引脚配置。

典型应用

AT90CAN32-15AT 适用于 6 应用s: Automotive Body-Control Module, Vehicle Instrument Cluster, Industrial CAN Gateway, Embedded CAN Sensor Node, Automotive Diagnostic Interface, Industrial Service Equipment.

🚗

Automotive Body-Control Module

The AT90CAN32-15AT fits an automotive body-control module because its 53 general-purpose I/O lines can connect switches, lamps, solenoids, and diagnostic inputs while the hardware CAN controller manages node communication. At 15 MHz, the AVR core provides deterministic control throughput, and the 32 KB flash holds application firmware with read-while-write capability. The 4.5 V to 5.5 V supply range and -40C to +85C rating suit industrial vehicle environments. A CAN transceiver is still required at the physical network layer, and the PCB must satisfy the vehicle platform’s transient and grounding requirements.

📺

Vehicle Instrument Cluster

An instrument cluster can use the AT90CAN32-15AT for display control, switch scanning, warning indicators, and communication with vehicle CAN nodes. Its 53 I/O lines provide substantial connectivity for display control, indicators, and input devices, while 2 KB SRAM supports temporary display and communication data. The 32 KB flash accommodates compact embedded firmware without an external program-memory device. Designers should partition CAN traffic from display timing and use the manufacturer pin-description table to maintain a clean, reviewable PCB layout.

🏭

Industrial CAN Gateway

The AT90CAN32-15AT is suitable for an industrial CAN gateway that converts or aggregates messages between CAN-connected sensors and another embedded interface. Its integrated CAN 2.0A/CAN 2.0B controller reduces system complexity, while the 8-bit AVR core can handle protocol filtering, state management, and diagnostics. With 32 KB flash, 2 KB SRAM, and 1 KB EEPROM, it supports compact gateway firmware and persistent configuration. Keep CAN routing short and controlled, provide local supply bypassing, and validate termination and isolation requirements at the physical bus interface.

🧩

Embedded CAN Sensor Node

A compact CAN sensor node can use the AT90CAN32-15AT to acquire data, apply local filtering, and publish measurements over a vehicle or industrial network. The 53 I/O lines permit connection of digital sensors and control outputs, and the 32-bit working-register architecture supports efficient real-time control. Its 15 MHz clock is suitable for protocol servicing and peripheral coordination, while EEPROM can retain calibration values between power cycles. The actual CAN bus driver must be selected for the voltage, isolation, speed, and environmental requirements of the installation.

🔧

Automotive Diagnostic Interface

The AT90CAN32-15AT can serve as the controller in a diagnostic interface, executing test sequences and exchanging messages through its integrated CAN controller. The 32 KB flash provides room for a focused diagnostic application, 2 KB SRAM supports buffering, and 53 I/O lines can expose status, service, and communication signals. The -40C to +85C rating is appropriate for many vehicle compartments, although deployment near heat-generating equipment requires thermal review. Firmware should include message timing checks, fault counters, recovery behavior, and bus-off handling appropriate to the vehicle network.

⚡

Industrial Service Equipment

For industrial service equipment, the AT90CAN32-15AT can combine CAN communication, local diagnostics, display or indicator control, and configurable I/O in a single controller. Its 32 KB flash and 1 KB EEPROM support embedded application code and persistent service parameters, while the 15 MHz AVR core provides ample throughput for a dedicated CAN endpoint. The 64-pin TQFP package is practical when a moderate number of external lines is needed. Confirm the product’s environmental class, ESD requirements, and CAN bus topology before releasing an industrial service product.

What is the AT90CAN32-15AT?
The AT90CAN32-15AT is a Microchip Technology 8-bit AVR RISC automotive microcontroller with a 15 MHz clock, 32 KB of flash memory, and an integrated CAN 2.0A/CAN 2.0B controller. According to the Microchip Technology AT90CAN32 datasheet, it includes 2 KB of SRAM, 1 KB of EEPROM, 53 general-purpose I/O lines, 32 working registers, and a 64-pin TQFP package.
What are the key specifications of AT90CAN32-15AT that engineers should know?
The AT90CAN32-15AT combines a 15 MHz AVR 8-bit RISC core, 32 KB flash, 2 KB SRAM, 1 KB EEPROM, 53 I/O lines, and CAN 2.0A/CAN 2.0B support. According to the Microchip Technology AT90CAN32 datasheet, its operating supply range is 4.5 V to 5.5 V, and the industrial temperature range is -40C to +85C in a 64-pin TQFP package.
AT90CAN32-15AT datasheet PDF and documentation
The official AT90CAN32-15AT documentation begins on the Microchip Technology AT90CAN32 product page. The family datasheet identifies the 8-bit AVR architecture, CAN controller, memory organization, electrical limits, and package pin descriptions. Use the exact order code AT90CAN32-15AT when selecting the 15 MHz, 64-pin TQFP industrial-temperature configuration.
Where can I find the AT90CAN32-15AT pinout?
The AT90CAN32-15AT pinout is in the pin-description table of the Microchip Technology AT90CAN32 datasheet. The device uses a 64-pin TQFP package with 53 general-purpose I/O lines. Because exposed-pad and alternate-function details must be assigned exactly, use the manufacturer pin table together with the package drawing before routing the PCB.
What voltage does the AT90CAN32-15AT operate at?
The AT90CAN32-15AT operates from 4.5 V to 5.5 V. According to the Microchip Technology AT90CAN32 datasheet, this range applies to the 5 V automotive-grade family configuration. Board design should account for transient protection and place bypass capacitance close to each supply pin to preserve a stable operating rail.
How much memory does the AT90CAN32-15AT have?
The AT90CAN32-15AT has 32 KB of flash program memory, 2 KB of SRAM, and 1 KB of EEPROM. According to the Microchip Technology AT90CAN32 datasheet, the flash supports read-while-write operation, while EEPROM provides nonvolatile storage for configuration values, calibration constants, or service data that must survive power removal.
What CAN protocol does the AT90CAN32-15AT support?
The AT90CAN32-15AT includes a hardware CAN controller supporting CAN 2.0A and CAN 2.0B. According to the Microchip Technology AT90CAN32 datasheet, this controller is intended for distributed automotive and industrial networks. The MCU still requires a suitable CAN transceiver to connect its CAN TX and RX signals to the physical bus.
Where to buy AT90CAN32-15AT online?
The AT90CAN32-15AT can be requested through the Request a Quote form on this page. The form is the appropriate route for current commercial availability, order quantities, and lead-time confirmation because inventory and market conditions can change. The identified order configuration is a 15 MHz device in a 64-pin TQFP package supplied on tape and reel.
What is the price of AT90CAN32-15AT?
Use the Request a Quote form on this page for the current AT90CAN32-15AT price and quantity pricing. Market pricing can vary with order size, inventory, and packaging, so the form provides the most appropriate current commercial response. The target order code is supplied in a 64-pin TQFP package with tape-and-reel packing media.
What is the lead time for AT90CAN32-15AT?
Request the current lead time through the Request a Quote form on this page. The manufacturer listing identifies tape-and-reel packing media for 1000 units, but a present-day lead-time confirmation should accompany the quotation request. For production planning, confirm the schedule, date code, and quantity before committing the device to a build.
Is AT90CAN32-15AT in stock?
Current AT90CAN32-15AT availability should be confirmed through the Request a Quote form on this page. The manufacturer lists the order code as active, and channel listings identify it as an orderable 64-pin TQFP microcontroller, but live stock can change without notice. Include your required quantity, date code, and target delivery date in the request.
AT90CAN32-15AT vs AT90CAN32-15AT1: which should I choose?
Choose AT90CAN32-15AT for the specified -40C to +85C configuration and AT90CAN32-15AT1 when the application calls for the alternative extended-temperature ordering option. Both are Microchip Technology AT90CAN32 family devices, but the suffix identifies a different temperature grade. Confirm the complete electrical ratings and qualification requirements in the manufacturer datasheet before substitution.
When should I choose AT90CAN32-15AT over a 16 MHz variant?
Choose AT90CAN32-15AT when the 15 MHz rating satisfies the control-loop and communications schedule or when a common 15 MHz design is required across several products. A 16 MHz AT90CAN32 variant offers about 6.7% more clock frequency, but it may also change timing and qualification assumptions. Retain the original device when its 15 MHz performance margin is adequate.
Is the AT90CAN32-15AT suitable for automotive CAN applications?
The AT90CAN32-15AT is an automotive-family AT90CAN32 device with a hardware CAN controller, 15 MHz clock, 53 I/O lines, and a -40C to +85C temperature rating. According to the Microchip Technology AT90CAN32 datasheet, it is suitable for CAN-based vehicle systems. Confirm AEC-Q100 qualification, transient immunity, and all end-application requirements before production release.
What can replace the AT90CAN32-15AT?
AT90CAN32-15AT1 is a directly identified same-package family alternative with the same 15 MHz and 64-pin TQFP architecture. Other same-brand AT90CAN32 ordering variants can differ in clock or temperature grade. Use the AT90CAN32-15AT as the baseline, verify every alternate suffix against the pinout and electrical limits, and avoid assuming that a different CAN controller is protocol-identical.
Is AT90CAN32-15AT the same as AT90CAN64-15AT?
No. AT90CAN32-15AT and AT90CAN64-15AT belong to related AVR CAN families, but the 32 and 64 designations identify different flash-memory capacities. The AT90CAN32-15AT has 32 KB of flash, while the AT90CAN64-15AT has 64 KB. Firmware size and peripheral requirements must therefore be reviewed before treating the 64 KB device as a drop-in choice.

工程参考数据: AT90CAN32-15AT ——对比、设计指导和合规信息。

选型指南

Choose the AT90CAN32-15AT when the design needs a 15 MHz AVR CAN controller with 32 KB flash, 2 KB SRAM, 1 KB EEPROM, 53 I/O lines, and a documented -40C to +85C range in a 64-pin TQFP. It is a strong fit for automotive body modules, instrument clusters, diagnostic interfaces, and industrial CAN nodes that do not require more than 32 KB firmware. Select AT90CAN32-15AT1 when the AT1 temperature-grade ordering option is required, but verify its complete temperature and qualification ratings. Consider AT90CAN32-16AT or AT90CAN32-16AU when approximately 6.7% more clock frequency is useful and the associated timing and qualification review passes. AT90CAN32-15AU can serve as a same-family ordering option when its exact package and temperature codes match the system requirements. Avoid treating AT90CAN64-15AT as a direct drop-in because its 64 KB flash capacity changes the memory configuration and software constraints.

与替代料对比

参数 本产品 AT90CAN32-15AT1 AT90CAN32-16AT AT90CAN32-16AU AT90CAN32-15AU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 64-pin TQFP (14 mm x 14 mm) 64-pin TQFP (14 mm x 14 mm) 64-pin TQFP (14 mm x 14 mm) 64-pin TQFP (14 mm x 14 mm) 64-pin TQFP (14 mm x 14 mm)
Maximum Clock Speed 15 MHz 15 MHz 16 MHz 16 MHz 15 MHz
Flash Memory 32 KB 32 KB 32 KB 32 KB 32 KB
SRAM 2 KB 2 KB 2 KB 2 KB 2 KB
EEPROM 1 KB 1 KB 1 KB 1 KB 1 KB
General-Purpose I/O Lines 53 lines 53 lines 53 lines 53 lines 53 lines
CAN Controller CAN 2.0A and CAN 2.0B CAN 2.0A and CAN 2.0B CAN 2.0A and CAN 2.0B CAN 2.0A and CAN 2.0B CAN 2.0A and CAN 2.0B

关键差异点

  • Integrated CAN communication and extensive I/O in one controller (对比 AT90CAN64-15AT)
  • Exact 15 MHz clock configuration for timing-compatible designs (对比 AT90CAN32-16AT)
  • Identified extended-temperature family option (对比 AT90CAN32-15AU)

设计说明

Design the supply network for the documented 4.5 V to 5.5 V operating range and place the manufacturer-recommended bypass capacitors close to the AT90CAN32-15AT supply pins. In an automotive installation, include protection against transient and reverse-polarity events at the board boundary rather than relying on the MCU pins alone. Keep the CAN transceiver and protected supply return in the same grounding strategy to prevent bus offsets and false errors.

Assign every signal and power connection from the manufacturer pin-description table before PCB routing. Reserve the 53 general-purpose I/O lines according to reset, programming, peripheral, and alternate-function requirements. Use a short, direct path for oscillator and decoupling connections, maintain a stable ground reference beneath the device, and follow the package drawing for lead orientation and exposed thermal behavior.

Do not assume that a related AT90CAN32 suffix is electrically identical. The -15, -16, AT, AU, and AT1 designators identify ordering combinations that can change clock speed, package code, or temperature grade. Compare each proposed replacement against the original pinout, supply limits, clock requirement, and automotive qualification criteria before approving a drop-in substitution.

Keep the MCU CAN TX and RX routing concise and connect them to a CAN transceiver rather than directly to a physical bus. Route the transceiver-side CANH and CANL pair as a controlled differential pair, apply the network termination specified by the system architecture, and keep switching or high-current paths away from the communication area. Verify signal integrity at the intended bus rate and under worst-case transceiver loading.

The 64-pin TQFP is a surface-mount package with a 1 mm body height, but final thermal performance depends on the PCB copper area, airflow, and nearby heat sources. Follow the manufacturer’s maximum junction-temperature and package guidance, provide an uninterrupted ground plane, and avoid enclosing the device in a sealed enclosure without a thermal path. Estimate junction rise using the actual board construction rather than relying on package size alone.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The product is identified as an automotive-family AT90CAN32 device, but specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not stated in the available product information. Confirm these requirements with the manufacturer before environmental or regulatory release.

相关搜索

at90can32 datasheet atmel at90can32 AT90CAN32-15AT datasheet AT90CAN32-15AT pinout AT90CAN32-15AT specifications AT90CAN32-15AT datasheet pdf AT90CAN32-15AT equivalent AT90CAN32-15AT replacement AT90CAN32-15AT vs AT90CAN32-16AT AT90CAN32-15AT TQFP footprint AT90CAN32-15AT automotive CAN AT90CAN32-15AT price

相关元器件 & 术语

Microchip Technology AT90CAN32-15AT AT90CAN32 AT90CAN32-15AT1 AT90CAN32-16AT AT90CAN32-16AU AT90CAN32-15AU AT90CAN64-15AT AVR 8-bit RISC microcontroller automotive microcontroller embedded controller CAN controller CAN 2.0A CAN 2.0B TQFP-64 surface mount SMD flash memory EEPROM SRAM general-purpose I/O read-while-write RoHS REACH AEC-Q100
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情