Microchip Technology

ATMEGA169A-MU - 16MHz 8-Bit AVR MCU 64-QFN | Microchip

料号: ATMEGA169A-MU ✓ 量产中
2.5 V to 5 V Vdss 64-QFN (9 mm x 9 mm) with exposed pad Package 16 MHz Speed 16 KB Memory
最小起订量: 1 |

ATMEGA169A-MU 概述

Microchip Technology ATMEGA169A-MU is a low-power 8-bit AVR RISC microcontroller with a 16 MHz maximum clock frequency, 16 KB of in-system programmable Flash, 512 bytes of EEPROM, and 1 KB of SRAM in a 64-QFN package with an exposed pad. The device is supplied in a 9 mm by 9 mm surface-mount package and supports operation from 2.5 V to 5 V.

An 8-bit AVR microcontroller is a compact embedded-control platform that combines a RISC processor core, Flash program memory, data EEPROM, SRAM, timers, serial interfaces, and general-purpose I/O on one integrated circuit. The ATmega169A belongs to the ATmega family of 8-bit CMOS RISC microcontrollers, where the CPU executes instructions from embedded Flash while retaining data in SRAM and EEPROM. It is intended for compact control systems that require deterministic peripheral integration without a higher-cost processor or external memory.

Key device resources include 16 KB of ISP Flash, 512 bytes of EEPROM, 1 KB of SRAM, 54 or 69 general-purpose I/O lines depending on the device variant, and 32 general-purpose working registers. The ISP Flash supports in-system programming, and its read-while-write capability permits program-memory access during operation. The integrated memory and I/O resources make the microcontroller suitable for control, communications, sensing, and low-to-medium-rate data-processing tasks.

The ATmega169A uses the AVR architecture and is associated with the picoPower family identified by Microchip for the ATmega169PA. Its operating range of 2.5 V to 5 V accommodates both 3.3 V and 5 V equipment when the surrounding circuitry remains compatible with the selected operating voltage. The 16 MHz operating point provides useful processing headroom for event-driven control, while timer, serial, and parallel interfaces support common embedded-system functions.

Typical uses include industrial sensor controllers, building and automation equipment, compact motor-control subsystems, instrumentation, communication modules, and low-power embedded control boards. For designs requiring the exact ATmega169A feature set, the firmware should be validated for the selected voltage, clock configuration, peripheral set, and package footprint before production release.

PCB implementation must account for the 64-QFN exposed thermal pad, its required footprint geometry, and the manufacturer’s recommended land pattern. Decoupling should be placed directly beside the supply pins, programming and reset signals should remain accessible, and the exposed pad should be connected to the intended ground plane according to the manufacturer’s package recommendations.

This product record combines the exact manufacturer and distributor package, memory, clock, voltage, and ordering information with purchasing guidance, application context, and design-oriented engineering notes. It also distinguishes the exact ATMEGA169A-MU ordering code from similarly named package, reel, or related-device variants so engineers can verify footprint and firmware compatibility before substitution.

直接替换替代料: ATMEGA169A-MU ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: ATMEGA169A-MU (相同外形与封装尺寸) ——差异在于 Package, Supply Voltage Range, Flash Memory, Instructions, Program Memory Type.

Microchip Technology
Package: 64-QFN (9x9 mm) MLF, surface mount
Supply Voltage Range: 2.7 V to 5.5 V
Flash Memory: 16 KB (8K x 16), In-System Programmable
对比 ATMEGA169A-MU →
Microchip Technology
Package: 64-QFN (7x7 mm) with exposed pad
Supply Voltage Range: 1.8 V to 5.5 V
Flash Memory: 16 KB ISP Flash
对比 ATMEGA169A-MU →
Microchip Technology
Package: 64-QFN (7x7 mm) with exposed pad
Supply Voltage Range: 2.7V to 5.5V
Flash Memory: 16KB (8K x 16)
对比 ATMEGA169A-MU →
Microchip Technology
Package: 64-QFN (9x9 mm) with exposed pad
Supply Voltage Range: 1.8 V to 5.5 V
Program Memory Type: FLASH
对比 ATMEGA169A-MU →

该产品暂无直接替换替代料。

请求替代料

ATMEGA169A-MU 最大额定值与电气特性

Microcontroller Type 8-bit AVR RISC CMOS microcontroller
最大时钟频率 16 MHz
Flash Memory Size 16 KB
Flash Organization 8K x 16
Program Memory Type ISP Flash with read-while-write capability
EEPROM Size 512 bytes
SRAM Size 1 KB
General-Purpose I/O Lines 54/69 lines
General-Purpose Working Registers 32 registers
Operating Voltage Range 2.5 V to 5 V
封装 64-QFN (9 mm x 9 mm) with exposed pad
安装类型 Surface mount
Core Architecture AVR 8-bit RISC
Programming Interface In-system programming (ISP)
Process Technology CMOS
Power Class Low-power microcontroller
RoHS 状态 Compliant
Manufacturer Product Family ATmega 8-bit AVR microcontroller family
Ordering Code ATMEGA169A-MU

ATMEGA169A-MU 64-qfn (9 mm x 9 mm) with exposed pad 引脚配置指南

ATMEGA169A-MU(64-qfn (9 mm x 9 mm) with exposed pad 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

ATMEGA169A-MU 的 64-qfn (9 mm x 9 mm) with exposed pad 封装引脚图

暂无详细引脚数据: ATMEGA169A-MU.

请参阅 数据手册 以查看完整引脚配置。

典型应用

ATMEGA169A-MU 适用于 6 应用s: Industrial Sensor Controller, Building Automation Module, Compact Motor-Control Subsystem, Instrumentation and Data Logger, Low-Power IoT Sensor Node, Communication Interface Module.

🏭

Industrial Sensor Controller

The ATMEGA169A-MU fits an industrial sensor controller that must combine local signal conditioning, digital filtering, and an industrial communication interface on one compact device. Its 16 MHz AVR core provides useful processing headroom for sensor sampling and protocol handling, while 16 KB of ISP Flash accommodates application firmware and 1 KB of SRAM supports bounded working buffers. The 512-byte EEPROM can retain calibration constants, configuration data, or production settings. In a controller implementation, the device can timestamp samples, apply limits and compensation, and transmit results through an appropriate serial interface. The 2.5 V to 5 V operating range supports common embedded rails, but the 64-QFN exposed-pad layout requires careful decoupling and thermal design on the PCB.

🧩

Building Automation Module

The ATMEGA169A-MU is appropriate for a building-automation module that consolidates environmental inputs, actuator control, and status reporting. Its 16 KB Flash stores a compact control application, 1 KB of SRAM supports runtime state, and the 54 or 69 general-purpose I/O lines provide flexible connections to digital sensors, relay drivers, and status indicators. The microcontroller can scan inputs on timer events, apply hysteresis and scheduling logic, and update a communications module. Its 2.5 V to 5 V range allows deployment in both 3.3 V and 5 V controller architectures. Engineering attention should center on exposed-pad grounding, supply decoupling near the device, and firmware defaults that place unused I/O into safe states during startup or communication loss.

🔧

Compact Motor-Control Subsystem

The ATMEGA169A-MU can serve as the supervisory controller in a compact motor or actuator subsystem where a dedicated high-performance motor-control processor would be unnecessary. The 16 MHz AVR core can execute position or speed-control logic, monitor limit switches, and coordinate current or direction commands, while its timer resources support deterministic edge and interval generation. With 16 KB of Flash, 1 KB of SRAM, and 512 bytes of EEPROM, the device provides adequate resources for compact supervisory logic, parameter storage, and diagnostics. The MCU should not drive high current directly; external power stages and protection are required. Its small 64-QFN footprint supports dense control assemblies, although the exposed pad and 9 mm by 9 mm body still require a carefully designed thermal path.

📡

Instrumentation and Data Logger

The ATMEGA169A-MU is well suited to a compact instrumentation node that samples slow or moderate-rate signals, applies calibration, and stores configuration or event data. Its 16 MHz processing capability permits digital filtering and protocol assembly in an 8-bit architecture, while the 512-byte EEPROM is appropriate for calibration coefficients and serial numbers. The 1 KB of SRAM can support temporary measurement buffers, while 16 KB of ISP Flash provides room for the control and logging application. A typical design connects analog front-end circuitry to the MCU’s converters, stores processed samples in external nonvolatile memory when required, and reports data through a serial link. The 2.5 V to 5 V range supports low-voltage sensor systems as well as 5 V legacy instruments, provided the chosen clock and peripherals are valid at the operating voltage.

🧩

Low-Power IoT Sensor Node

The ATMEGA169A-MU can serve as the local processing element in a low-power IoT sensor node when the design values integration, deterministic control, and modest memory use over a high-performance application processor. The 16 KB ISP Flash holds a compact acquisition and communication task, 1 KB of SRAM supports transient sensor and network data, and 512 bytes of EEPROM preserves identifiers or calibration values. Timer-driven sampling can reduce unnecessary activity, while the serial peripheral can connect a radio module. Because the ATmega169A does not integrate wireless communications, the radio remains a separate component and its sleep current can dominate the node budget. Firmware should use the device’s low-power operating modes effectively, and the 64-QFN exposed pad should be tied to the recommended ground plane to preserve electrical and thermal performance.

🌐

Communication Interface Module

The ATMEGA169A-MU is suitable for a dedicated communication interface or protocol-conversion module when the design needs local framing, configuration, diagnostics, and status control. Its 16 MHz AVR core can handle protocol parsing and response generation, while 16 KB of Flash stores the protocol stack and 1 KB of SRAM supports packet assembly. General-purpose I/O lines can provide hardware flow control, configuration inputs, and fault indicators. The device can bridge a local serial interface to a network PHY or transceiver selected for the required physical layer. Because the MCU does not itself provide Ethernet or a complete modern network stack, the external interface must be matched to the protocol and bandwidth requirements. The compact QFN package helps minimize board area, but exposed-pad grounding and local bypass placement remain essential for reliable communication at short cable lengths and industrial edge rates.

What are the key specifications of ATMEGA169A-MU that engineers should know?
The ATMEGA169A-MU is an 8-bit AVR RISC microcontroller operating at up to 16 MHz with 16 KB ISP Flash, 512 bytes of EEPROM, and 1 KB of SRAM. It supports a 2.5 V to 5 V operating range and is packaged in a 64-QFN with an exposed pad measuring 9 mm by 9 mm. Microchip’s ATmega169A product information identifies the device as a low-power CMOS AVR microcontroller with 54 or 69 general-purpose I/O lines and 32 working registers.
What is the operating voltage of ATMEGA169A-MU?
The ATMEGA169A-MU operates from 2.5 V to 5 V. This range supports design platforms operating at 3.3 V or 5 V, provided the clock configuration, peripherals, and external circuitry are compatible with the chosen supply voltage. The voltage range is identified in the manufacturer-family device listing for the 64-pin QFN ordering code. Always verify operating limits against the current Microchip datasheet before finalizing a production design.
What is the maximum clock frequency of ATMEGA169A-MU?
The ATMEGA169A-MU supports a maximum clock frequency of 16 MHz. The exact distributor descriptions identify the part as an 8-bit AVR microcontroller with a 16 MHz clock, while some related listing text displays a 20 MHz class field. For this exact ordering code, use the manufacturer’s 16 MHz specification and confirm the intended operating frequency against the official device documentation before programming the fuse settings or designing timing-sensitive interfaces.
Where can I download the ATMEGA169A-MU datasheet PDF?
The official ATMEGA169A-MU documentation begins at Microchip Technology’s ATmega169A product page, which provides device information and links to technical documentation. The ordering code is also indexed by an ATMEL-branded ATMEGA169A-MU datasheet page. Use the manufacturer product page as the primary document source and consult the device-specific pin, electrical, package, and clock sections before releasing a PCB or production firmware.
Where can I find the ATMEGA169A-MU pinout and 64-QFN footprint?
The ATMEGA169A-MU pinout and land pattern must be taken from the pin-description and package drawings in Microchip’s ATmega169A documentation. The exact device is a 64-QFN with an exposed pad in a 9 mm by 9 mm package. Because exposed-pad and thermal-pad land patterns must follow the exact drawing, do not infer pad dimensions or pin orientation from a generic QFN library. The exposed-pad connection and copper strategy should also be checked against the package guidance.
Where to buy ATMEGA169A-MU online?
The ATMEGA169A-MU can be sourced through the Request a Quote form on this page, where the exact ordering code, target quantity, delivery location, and delivery requirements should be entered. The verified manufacturer and distributor listings confirm the device as a Microchip 64-QFN MCU with 16 KB Flash, 512 bytes of EEPROM, and 1 KB of SRAM. Availability and lead time should be confirmed through the quote process rather than assumed from a catalog or marketplace listing.
What is the price of ATMEGA169A-MU?
The current commercial price for ATMEGA169A-MU should be obtained through the Request a Quote form on this page. The quote request should state the required quantity, reel or tray packaging requirement, ship-to location, and expected delivery date. Because pricing and component availability can change by quantity, inventory status, and market conditions, use the form’s returned quotation as the commercial basis for a purchase.
What is the lead time for ATMEGA169A-MU?
The current lead time for ATMEGA169A-MU should be requested through the Request a Quote form on this page. Include the production quantity, target delivery date, and whether the parts are required in tray packaging or a reel configuration. The -MU ordering code is associated with the 64-QFN tray package, while the -MUR ordering code identifies the corresponding reel configuration. Confirming the exact package suffix with the quotation is essential before committing a production schedule.
Is ATMEGA169A-MU in stock?
Stock for ATMEGA169A-MU should be confirmed through the Request a Quote form on this page. Some distributor search results indicate available inventory, but live stock quantities vary by package suffix and distribution channel. Submit the exact ATMEGA169A-MU ordering code and required quantity to obtain a current allocation and delivery commitment. Do not substitute ATMEGA169A-MUR unless reel packaging is acceptable for the receiving and assembly process.
ATMEGA169A-MU vs ATMEGA165A-MUR - which is better for a 64-QFN design?
ATMEGA169A-MU is the exact 64-QFN ATmega169A ordering code with 16 KB Flash, 512 bytes of EEPROM, 1 KB of SRAM, and a 16 MHz maximum clock in the verified listing. ATMEGA165A-MUR is identified as another 16 KB Flash, 64-QFN AVR device, but matching the package and memory headline does not establish identical peripheral assignments or firmware compatibility. Choose ATMEGA165A-MUR only after a complete pin, clock, interrupt, and peripheral comparison confirms the intended function.
What is the difference between ATMEGA169A-MU and ATMEGA169A-MUR?
ATMEGA169A-MU and ATMEGA169A-MUR identify the same 64-QFN ATmega169A device family in different delivery configurations: the -MU code is associated with tray packaging, while the -MUR code is associated with reel packaging. The verified distributor descriptions give both parts 16 KB Flash, 512 bytes of EEPROM, 1 KB of SRAM, and a 16 MHz maximum clock. Their electrical functions should be treated as the same device family, but the mechanical packing suffix must match the PCB assembly process.
When should I choose ATMEGA169A-MU over ATMEGA169A-MUR?
Choose ATMEGA169A-MU when the assembly process uses trays and the exact ordering code must remain ATMEGA169A-MU. Choose ATMEGA169A-MUR when reel packaging is required for automated pick-and-place, volume handling, or standard feeder operation. The package type and body are the same 64-QFN form; the meaningful purchasing distinction is the delivery format. Confirm the manufacturer ordering information and the quantity needed through a formal quotation before changing the approved BOM suffix.
Is ATMEGA169A-MU suitable for low-power embedded control?
The ATMEGA169A-MU is suitable for compact embedded-control designs that need an 8-bit AVR processor, 16 KB ISP Flash, 1 KB of SRAM, and 512 bytes of EEPROM. Microchip classifies the ATmega169A as a high-performance, low-power CMOS AVR microcontroller. The 2.5 V to 5 V operating range also supports common embedded supply levels. Final power consumption and sleep-mode performance depend on clock configuration, active peripherals, and firmware, so measure the completed design under its intended workload.
What can replace ATMEGA169A-MU?
A drop-in replacement for ATMEGA169A-MU must preserve the 64-QFN footprint, pin functions, clock arrangement, memory map, interrupt behavior, peripheral set, voltage range, and programming requirements. ATMEGA169A-MUR is the closest ordering option when reel packaging is acceptable, but it is a packing variant rather than a distinct functional substitute. ATMEGA165A-MUR and ATMEGA169PA require a full electrical and firmware review because a shared package family or similar memory capacity alone does not prove pin-to-pin compatibility.
Is ATMEGA169A-MU RoHS compliant and suitable for automotive products?
The ATMEGA169A-MU is identified as RoHS compliant in the manufacturer-device listing. Automotive suitability cannot be concluded from RoHS status alone because the exact ordering code is not identified as an AEC-Q100-qualified automotive variant in the verified information. For an automotive design, request the current qualification and traceability documentation from Microchip or an authorized channel. Do not treat the related automotive and industrial ordering codes as interchangeable without qualification review.

工程参考数据: ATMEGA169A-MU ——对比、设计指导和合规信息。

选型指南

Choose ATMEGA169A-MU when the design specifically requires the ATmega169A feature set and the assembly process accepts tray-packaged parts. Its 16 MHz AVR core, 16 KB ISP Flash, 512-byte EEPROM, 1 KB of SRAM, and 2.5 V to 5 V operating range suit compact sensor, control, automation, and protocol-handling designs. Choose ATMEGA169A-MUR instead when the same device family is needed in reel packaging for automated assembly, but do not substitute it when the approved BOM, labeling, or incoming-inspection procedure requires the -MU suffix. ATMEGA165A-MUR and ATMEGA169PA may appear in comparisons because they share an AVR and 64-pin family context, but neither should be treated as a drop-in replacement without a complete review of pin multiplexing, peripherals, interrupts, clock configuration, voltage limits, and firmware. If low cost or availability is the priority and the full electrical comparison passes, the related device can be evaluated; otherwise, retaining the exact ATMEGA169A ordering code minimizes redesign and validation risk.

关键差异点

  • Exact 64-QFN tray ordering code (对比 ATMEGA169A-MUR)
  • 16 MHz AVR processing rate with 16 KB ISP Flash (对比 ATMEGA165A-MUR)
  • Single-part integration for compact control designs (对比 ATMEGA165A-MUR)

设计说明

Use the exact 64-QFN land pattern and exposed-pad geometry from Microchip’s ATmega169A package drawing rather than a generic QFN footprint. The verified package description specifies a 64-QFN measuring 9 mm by 9 mm with an exposed pad. Confirm pad dimensions, solder-mask clearance, paste-aperture design, and courtyard rules from the manufacturer drawing. A footprint error can shift every lead and compromise solderability, particularly because the exposed pad materially influences both assembly and thermal performance.

Place the required bypass capacitors adjacent to the ATMEGA169A-MU supply and ground pins, following the placement and capacitance recommendations in the current manufacturer datasheet. Keep the high-frequency return path short and connect the exposed pad to the intended ground plane with the prescribed via pattern. Because this device supports 2.5 V to 5 V operation, verify that the selected regulator, clock source, peripherals, and external signal levels are valid at the actual supply voltage.

Preserve access to the reset and in-system programming signals while keeping sensitive timing and communication routes away from noisy switching nodes. Route clock and programming traces with short paths, maintain a continuous ground reference, and isolate analog or sensor inputs from relay drivers and other high-current switching paths. Although the ATMEGA169A-MU is an 8-bit MCU rather than a high-speed digital interface device, layout discipline remains important when timers, serial links, and external communications share a compact board.

Do not treat ATMEGA169A-MUR as an unrestricted substitute for ATMEGA169A-MU: the core device family is the same, but the packing suffix differs. Likewise, a shared 64-QFN package and similar memory capacity do not prove that ATMEGA165A-MUR or ATMEGA169PA has identical pin functions, peripheral mapping, interrupt behavior, or firmware support. For any substitution, compare the complete pin list, clock system, peripheral registers, boot and fuse behavior, voltage limits, and package drawings before updating the approved BOM.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The verified device listing identifies the ATMEGA169A-MU as RoHS compliant. No RoHS-independent REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was established for the exact ordering code.

相关搜索

ATMEGA169A-MU datasheet ATMEGA169A-MU pinout ATMEGA169A-MU datasheet pdf ATMEGA169A-MU equivalent ATMEGA169A-MU replacement ATMEGA169A-MU footprint ATMEGA169A-MU price ATMEGA169A-MU stock ATMEGA169A 64-QFN pinout ATMEGA169A-MU vs ATMEGA169A-MUR ATMEGA169A-MU vs ATMEGA165A-MUR Microchip ATMEGA169A-MU ATMEGA169A-MU application circuit ATMEGA169A-MU 16MHz 64-QFN ATMEGA169A-MU programming

相关元器件 & 术语

Microchip Technology ATMEGA169A-MU ATmega169A ATMEGA169A-MUR ATMEGA165A-MUR ATMEGA169PA AVR 8-bit RISC microcontroller CMOS microcontroller embedded control In-system programming read-while-write 16 MHz 16 KB Flash 512-byte EEPROM 1 KB SRAM 54/69 general-purpose I/O lines 32 working registers 64-QFN 9 mm by 9 mm package exposed pad 2.5 V to 5 V picoPower RoHS AEC-Q100
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情