ATSAME53J20A-MUT - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
料号： ATSAME53J20A-MUT ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $14.5 | $14.50 |
| 10 | $12.85 | $128.50 |
| 100 | $11.2 | $1,120.00 |
| 500 | $9.95 | $4,975.00 |
| 1,000 | $8.75 | $8,750.00 |
ATSAME53J20A-MUT 概述
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for program storage and SRAM for runtime data), and a rich set of peripheral interfaces (GPIO, timers, communication buses, ADCs). The Cortex-M4F architecture adds a hardware single-precision Floating Point Unit to the ARMv7-M profile, accelerating DSP and control-loop math; at 120 MHz the SAM E53 reaches 150 DMIPS and 273 CoreMark. The 1 MB dual-panel Flash allows simultaneous read-while-write, enabling live firmware updates without halting code execution, while ECC on both Flash and SRAM is critical for safety-relevant applications in industrial and automotive environments.
Key features include the SAM E53 peripheral set: a 10/100 Ethernet MAC for networked devices, a high-speed USB 2.0 Full-Speed device/host interface, a TFT LCD controller with 2D graphics accelerator, a 12-bit 1 Msps ADC, two 12-bit DACs, multiple SERCOM serial interfaces (configurable as UART/SPI/I2C), an I2S interface for digital audio, and up to 51 GPIO. The 120 MHz Cortex-M4F core delivers deterministic real-time performance while the on-chip FPU and DSP extensions enable sensor fusion and motor-control algorithms without an external DSP.
Typical applications include industrial IoT gateways with Ethernet connectivity, building automation controllers, graphical HMI panels with TFT displays, connected sensor hubs, motor-control BLDC drives, and USB peripheral devices. The combination of Ethernet MAC, USB, and LCD controller makes the SAM E53 one of the few Cortex-M4F MCUs that can host a full-color touchscreen HMI plus industrial fieldbus in a single chip.
When designing with the ATSAME53J20A-MUT, plan a 4-layer PCB with a solid ground pour beneath the 9x9 VQFN exposed pad; the EP must be soldered to a 4x4 thermal via array to meet the 85C industrial temperature spec. Decouple VDDIO and VDDIN with a 100 nF X7R per pin plus a bulk 4.7 uF tantalum, and keep the 12 MHz external crystal within 5 mm of the XIN/XOUT pins to avoid jitter on the Ethernet PHY clock.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
直接替换替代料： ATSAME53J20A-MUT ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： ATSAME53J20A-MUT （相同外形与封装尺寸） ——差异在于 ADC, Package, MSL Level, Operating Temperature, SRAM.
快速对比工具——选择替代料号进行并排对比：
ATSAME53J20A-AUT
✅ 直接替换✓ 有现货
$5.72 / 个
查看数据手册 →ATSAME53J20A-MUT-EFP
✅ 直接替换✓ 有现货
$7.08 / 个
查看数据手册 →ATSAME53J19A-MUT
✅ 直接替换✓ 有现货
$4.95 / 个
查看数据手册 →ATSAME53J18A-MFT
✅ 直接替换✓ 有现货
$7.45 / 个
查看数据手册 →ATSAME53J20A-MUT 最大额定值与电气特性
| Core Architecture | ARM Cortex-M4F with FPU |
| Maximum Clock Speed | 120 MHz |
| Program Memory (Flash) | 1 MB (dual-panel with ECC) |
| SRAM | 256 KB with ECC |
| 封装 | 64-VQFN (9x9 mm) |
| 工作温度 | -40C to +85C |
| 安装类型 | Surface Mount |
| Ethernet MAC | 10/100 (MII/RMII) |
| USB Interface | USB 2.0 Full-Speed device/host |
| ADC | 12-bit, up to 1 Msps |
| DAC | 2x 12-bit |
| Graphics | TFT LCD controller + 2D accelerator |
| Serial Interfaces | Multiple SERCOM (UART/SPI/I2C), I2S |
| GPIO | Up to 51 |
| MSL 等级 | 3 (168 hours) |
| RoHS 状态 | Compliant |
| Lead-Free | Yes |
ATSAME53J20A-MUT 64-vqfn (9x9 mm) 引脚配置指南
ATSAME53J20A-MUT（64-vqfn (9x9 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： ATSAME53J20A-MUT.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ATSAME53J20A-MUT 适用于 6 应用s: Industrial IoT Gateway with Ethernet, Graphical HMI with TFT LCD, Connected Sensor Hub / Data Logger, BLDC / PMSM Motor Controller, USB Peripheral / HID Device, Building Automation Controller.
Industrial IoT Gateway with Ethernet
The ATSAME53J20A-MUT's integrated 10/100 Ethernet MAC with MII/RMII support makes it ideal for industrial IoT gateways that aggregate fieldbus data and forward it to cloud platforms via TCP/IP or MQTT. Its 120 MHz Cortex-M4F core runs protocol stacks (Modbus TCP, EtherNet/IP, MQTT-SN) while the 1 MB dual-panel Flash stores TLS certificates and OTA update images, and the 256 KB SRAM accommodates TCP/IP socket buffers without external memory. Pair the MCU with an external PHY such as the LAN8720A or KSZ8081; the integrated Ethernet MAC eliminates the cost and PCB area of an external controller. Compared to a Cortex-M0+ gateway MCU, the SAM E53F's FPU accelerates JSON parsing and edge analytics, while ECC on Flash and SRAM supports IEC 61508 SIL-2 designs.
推荐
Graphical HMI with TFT LCD
The ATSAME53J20A-MUT integrates a TFT LCD controller with 2D graphics accelerator and dedicated DMA, supporting resolutions up to WVGA (800x480) without external display memory. For industrial HMI panels with touch input, its 120 MHz Cortex-M4F renders complex icons and animations while leaving headroom for capacitive touch scanning; the 1 MB Flash holds fonts and graphics assets, and the 256 KB SRAM serves as the framebuffer for partial-update schemes. The on-chip 2D engine accelerates rectangle fills, blits, and alpha-blending, reducing CPU load to <20% versus a software-only renderer. Pair it with a 4.3-inch or 5-inch TFT module (e.g., NHD-4.3-ATXI-CTP) and an external SPI flash for additional graphics storage; the USB Full-Speed device port also enables HMI configuration uploads from a host PC.
推荐
Connected Sensor Hub / Data Logger
With its 12-bit 1 Msps ADC and dual 12-bit DACs, the ATSAME53J20A-MUT acts as a multi-sensor data logger for industrial monitoring systems, sampling 4-8 analog channels while running digital filter algorithms on the Cortex-M4F core. The 256 KB SRAM buffers several seconds of high-rate acquisition data before compression, while the 1 MB Flash stores configuration, calibration tables, and a small file system (FATFS) for an optional SD card interface via SERCOM SPI. ECC on both memory types protects against single-bit upsets in electrically noisy factory environments, and the on-chip FPU accelerates FFT-based vibration analysis for predictive maintenance. The USB Full-Speed device port provides a convenient configuration/debug interface during commissioning.
推荐
BLDC / PMSM Motor Controller
The 120 MHz Cortex-M4F with FPU delivers sufficient computational headroom for Field-Oriented Control (FOC) of a 3-phase BLDC or PMSM motor up to several hundred watts, executing the Park/Clarke transforms and PI loops within a 10 kHz control period. The ATSAME53J20A-MUT's multiple SERCOM interfaces drive external gate drivers (e.g., MCPWM-style PWM is available via the TCC peripherals), while the 12-bit DACs provide reference signals for analog control loops or threshold setters. The 1 MB Flash holds FOC firmware, motor parameter tables, and fault-logging code, and the 256 KB SRAM supports dual-buffer current/voltage sampling for sensorless control. For industrial motor drives requiring functional safety, the ECC memory and Cortex-M4F architecture support IEC 60730 Class B software library integration.
推荐
USB Peripheral / HID Device
The integrated USB 2.0 Full-Speed device/host controller with on-chip transceiver allows the ATSAME53J20A-MUT to act as a USB HID, CDC, or vendor-class device without external components. For USB keyboards, mice, programmable controllers, or industrial barcode scanners, the 120 MHz Cortex-M4F handles HID report generation while the 1 MB Flash stores custom firmware, and the 256 KB SRAM supports USB descriptor buffers and protocol state machines. In USB host mode, the MCU can interface with USB mass-storage devices or wireless dongles, making it suitable for industrial data-collection terminals. Pair with a single USB-B or USB-C connector and standard ESD protection array (e.g., PRTR5V0U4D); no external PHY or transceiver is required, simplifying the BOM.
推荐
Building Automation Controller
The ATSAME53J20A-MUT's combination of Ethernet, USB, multiple SERCOM interfaces, and analog peripherals makes it well-suited for building automation controllers that aggregate BACnet, Modbus, and KNX fieldbuses into a single management platform. Its 1 MB Flash holds large protocol stacks plus building-floor configuration data, and the 256 KB SRAM supports concurrent Ethernet and serial buffering. The integrated TFT controller drives local status displays in equipment rooms, while the 12-bit ADC reads temperature, humidity, and CO2 sensors directly. The Cortex-M4F with FPU executes PID control loops for HVAC damper and valve actuators with sub-millisecond latency, and the on-chip ECC memory ensures reliable operation in 24/7 installations where uptime is critical.
推荐
推荐产品汇总
工程参考数据： ATSAME53J20A-MUT ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ATSAME53J20A-AUT | ATSAME53J20A-MUT-EFP | ATSAME53J19A-MUT | ATSAME53J18A-MFT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-VQFN (9x9) | 64-VQFN (9x9) - same | 64-VQFN (9x9) - same | 64-VQFN (9x9) - same | 64-VQFN (9x9) - same |
| CPU Core | ARM Cortex-M4F @ 120 MHz | ARM Cortex-M4F @ 120 MHz | ARM Cortex-M4F @ 120 MHz | ARM Cortex-M4F @ 120 MHz | ARM Cortex-M4F @ 120 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB | 256 KB (-75%) |
| SRAM | 256 KB | 256 KB | 256 KB | 256 KB | 128 KB (-50%) |
| Ethernet MAC | 10/100 (MII/RMII) | 10/100 (MII/RMII) | 10/100 (MII/RMII) | 10/100 (MII/RMII) | 10/100 (MII/RMII) |
| USB Interface | USB 2.0 Full-Speed device/host | USB 2.0 Full-Speed device/host | USB 2.0 Full-Speed device/host | USB 2.0 Full-Speed device/host | USB 2.0 Full-Speed device/host |
| Operating Temperature | -40C to +85C (MUT industrial) | -40C to +85C | -40C to +85C (extended screening) | -40C to +85C | -40C to +85C |
关键差异点
- Higher Flash memory within the same SAM E53 family （对比 ATSAME53J18A-MFT)
- Extended factory screening option （对比 ATSAME53J20A-AUT)
- Industrial-grade operating temperature range （对比 ATSAMD51J18A-MU)
设计说明
The 64-VQFN package has a 9x9 mm body with an exposed thermal pad (EP) that must be soldered to the PCB ground plane for both thermal dissipation and electrical grounding. Use a 4x4 array of 0.3 mm thermal vias (plated-through, filled) on the EP pad; this typically reduces the junction-to-ambient thermal resistance to roughly 25 C/W. Decouple every VDD pin with a 100 nF X7R 0402 ceramic placed within 2 mm of the pin, and add one 4.7 uF bulk capacitor per supply rail (VDDIN, VDDIO, VDDPLL) within 10 mm. Keep the 12 MHz external crystal traces symmetric and within 5 mm of XIN/XOUT; add a ground guard ring around the crystal to avoid switching-noise coupling.
The ATSAME53J20A-MUT requires careful sequencing of VDDIN and VDDIO; according to the SAM E53 datasheet, VDDIO must ramp up before or simultaneously with VDDIN to avoid I/O latch-up. Use a low-dropout regulator such as the MCP1755S-3302E/DC (3.3V) for VDDIO and the TC2117-3.3VDBTR for VDDIN; enable the VDDIO rail first, then VDDIN via a power-good signal or simple RC delay. The MCU typically draws 30-50 mA active at 120 MHz with all peripherals running, peaking at 80 mA during Flash programming. Add a 10 uF tantalum bulk capacitor on VDDIN to absorb Flash write-current spikes that occur during dual-panel update operations.
Do not omit the external 32.768 kHz watch crystal on XIN32/XOUT32 even if you do not need RTC accuracy - the SAM E53 uses this as a low-power domain clock reference and missing it locks the RTC and power-manager into reset. Avoid running the Ethernet MAC at 100 Mbps with RMII without enabling the integrated 50 MHz output on the same pin group, as this conflicts with GPIO usage. When using the USB Full-Speed device port, route D+/D- as a 90-ohm differential pair and place a 47 nF series capacitor on each line per USB 2.0 specification. Finally, configure the WDT (watchdog timer) during boot - the Cortex-M4F will silently enter an undefined state on code lockup without it.
For the 10/100 Ethernet MAC, route the RMII signals to the external PHY with matched-length traces (within 50 mil / 1.27 mm) and maintain 50-ohm single-ended impedance; the 50 MHz RMII reference clock is shared between MCU and PHY, so use a clock buffer or careful point-to-point routing to avoid reflections. The TFT LCD parallel interface runs at up to 60 MHz pixel clock - use a 4-layer PCB with continuous ground plane beneath the bus and series 22-ohm damping resistors near the MCU to reduce overshoot. The 12-bit ADC analog inputs should be routed away from the digital switching signals; use a separate analog ground island tied to the main ground at a single point under the MCU.
合规信息
RoHS and REACH compliant per Microchip product page declaration. Industrial -40C to +85C operating range; AEC-Q100 not applicable (use ATSAMxE5xC automotive variants for AEC-Q100). Halogen-free per Microchip environmental compliance documentation.
