DSPIC33EP256MC506T-E/MR - 16-bit 60 MIPS DSC, 256KB Flash | Microchip
料号： DSPIC33EP256MC506T-E/MR ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $7.82 | $7.82 |
| 10 | $7.04 | $70.40 |
| 100 | $6.26 | $626.00 |
| 500 | $5.62 | $2,810.00 |
| 1,000 | $5.08 | $5,080.00 |
DSPIC33EP256MC506T-E/MR 概述
A digital signal controller combines the computational capability of a digital signal processor with the peripheral integration and deterministic control of a microcontroller. Within the power management hierarchy, the dsPIC33E family sits above general-purpose MCUs and is purpose-built for embedded control loops, blending a DSP engine (17-bit x 17-bit multiplier, barrel shifter, dual 40-bit accumulators) with standard MCU peripherals such as UART, SPI, I2C, DMA, and a watchdog timer.
Key features include Motor Control PWM (MCPWM) outputs, quadrature encoder interface (QEI), integrated comparators, on-chip operational amplifiers, and a 16-channel 10-bit/12-bit ADC - the analog and timing peripherals needed to close high-speed control loops for motors and power converters. The E-temperature grade (-40C to +125C) and AEC-Q100 qualification make it suitable for automotive-adjacent and harsh industrial environments.
Architecturally, the dsPIC33EP core executes C compiler-friendly 24-bit instructions with single-cycle MAC operations, and a Direct Memory Access (DMA) controller offloads peripheral data transfers from the CPU, keeping interrupt latency low during critical PWM update cycles.
Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, digital power supplies (LLC, PFC, buck converters), automotive auxiliary systems, and industrial automation sensors and actuators. The rich PWM and fast ADC enable field-oriented control (FOC) implementations at switching frequencies above 50 kHz.
Design consideration: the device requires a regulated 3.0V to 3.6V supply with proper decoupling on all VDD/VSS pin pairs; use an external crystal or the internal FRC oscillator with PLL to reach 60 MIPS - verify PLL lock before relying on precision timing.
This page synthesizes distributor pricing, same-footprint drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
直接替换替代料： DSPIC33EP256MC506T-E/MR ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： DSPIC33EP256MC506T-E/MR （相同外形与封装尺寸） ——差异在于 Package, Core, Program Memory (Flash), RAM, Supply Voltage.
快速对比工具——选择替代料号进行并排对比：
DSPIC33EP256MC506-E/MR
✅ 直接替换📋 参考替代料（不在目录中）
DSPIC33EP256MC506T-I/MR
✅ 直接替换✓ 有现货
$4.65 / 个
查看数据手册 →DSPIC33EP256MC506-I/MR
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
DSPIC33EP512MC506T-I/MR
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$4.2 / 个
查看数据手册 →DSPIC33EP128MC506T-I/MR
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$4.9 / 个
查看数据手册 →DSPIC33EP256MC506T-E/MR 最大额定值与电气特性
| Core | dsPIC 33EP, 16-bit DSC |
| Maximum Speed | 60 MIPS |
| Program Memory (FLASH) | 256 KB (85.5K x 24) |
| RAM | 32 KB (16K x 16) |
| 封装 | 64-VQFN (9x9 mm) |
| 工作温度 | -40C to +125C |
| 电源电压 | 3.0 V to 3.6 V |
| ADC | 16-channel, 10-bit/12-bit |
| PWM | Motor Control PWM (MCPWM) |
| Peripheral Interfaces | UART, SPI, I2C, CAN |
| DMA Channels | Yes (DMA controller) |
| Quadrature Encoder Interface | Yes (QEI) |
| On-chip Op Amps | Yes |
| Comparators | Yes |
| Watchdog Timer | Yes (WDT) |
| Qualification | AEC-Q100 qualified |
| 安装类型 | Surface Mount |
| Packaging | Tape & Reel (T suffix) |
DSPIC33EP256MC506T-E/MR 64-vqfn (9x9 mm) 引脚配置指南
DSPIC33EP256MC506T-E/MR（64-vqfn (9x9 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： DSPIC33EP256MC506T-E/MR.
请参阅 数据手册 以查看完整引脚配置。
典型应用
DSPIC33EP256MC506T-E/MR 适用于 6 应用s: BLDC / PMSM Motor Control, Digital Power Supplies, Automotive Auxiliary Systems, Industrial Automation and Robotics, Power Inverters and Solar MPPT, Embedded Sensing and IoT Nodes.
BLDC / PMSM Motor Control
The DSPIC33EP256MC506T-E/MR fits sensorless and sensored motor drives because its Motor Control PWM peripheral provides complementary outputs with programmable dead time, and the quadrature encoder interface accepts position feedback directly. The 16-channel 12-bit ADC samples phase currents and bus voltage synchronously with PWM boundaries, enabling field-oriented control loops executing at well above switching frequencies used in typical industrial drives. In a typical FOC topology, the DSC runs current loops in the 10-20 kHz band while the 60 MIPS core with single-cycle MAC handles Clarke/Park transforms without external assist. The -40C to +125C grade supports motor-mounted electronics in harsh enclosures, though designers must budget ADC latency and PWM dead time against overall loop stability margins.
推荐
Digital Power Supplies
For LLC resonant converters, PFC stages, and synchronous buck supplies, this DSC offers the fast PWM resolution and ADC throughput needed for voltage-mode and average-current-mode control. The 60 MIPS core executes compensation algorithms deterministically while the DMA controller moves ADC results without CPU intervention, keeping control-loop jitter low. On-chip comparators can trigger cycle-by-cycle current limiting in hardware, faster than any firmware path - a key safety feature when the power stage can fail within one switching period. The 256 KB FLASH accommodates multiple firmware protection schemes and startup routines. Place the device on an isolated control side with proper grounding; switching noise coupling into the ADC reference degrades regulation accuracy noticeably.
推荐
Automotive Auxiliary Systems
AEC-Q100 qualification and the -40C to +125C E-grade make this DSC appropriate for automotive auxiliary loads such as fuel pump drivers, throttle actuators, cooling fan controllers, and window lift mechanisms. The CAN interface integrates directly into vehicle networks, while the MCPWM drives H-bridge and three-phase stages for brushed and brushless actuators. The 256 KB FLASH provides space for diagnostics, UDS-style service routines, and safety monitors alongside the primary control algorithm. Designers must account for load-dump transients on the supply rail with external protection, since the absolute maximum supply is 3.6V continuous. Junction temperature margins should be verified at maximum ambient plus in-module heating before finalizing the thermal design.
推荐
Industrial Automation and Robotics
In factory automation, this controller serves servo drives, joint controllers, and closed-loop actuator nodes. The quadrature encoder interface plus high-resolution PWM supports precise positioning, while multiple UART/SPI/I2C ports connect sensors, displays, and fieldbus bridges. The DSP engine executes filtering (FIR/IIR) and inverse-kinematics helper math efficiently, and the DMA system keeps communication servicing from disturbing tight position-loop timing. With 32 KB of RAM there is adequate room for trajectory buffers and state estimation. The industrial -40C to +125C capability tolerates cabinet environments near drives and braking resistors. Firmware designers should reserve the watchdog timer and enable clock monitoring for machine-safety compliance in shared production lines.
推荐
Power Inverters and Solar MPPT
Renewable energy converters benefit from this DSC's combination of high-speed PWM, fast ADC, and CAN connectivity for inverter monitoring. A single DSPIC33EP256MC506T-E/MR can run maximum-power-point tracking for a PV string while simultaneously controlling an inverter bridge, using the on-chip comparators for hardware overcurrent trips. The 60 MIPS throughput supports multiple nested control loops (MPPT outer loop, current inner loop) executed at practical update rates, and 256 KB FLASH leaves room for grid-code compliance firmware variants. The 12-bit ADC resolves DC bus voltages to better than typical MPPT resolution requirements. galvanic isolation between the PV input, grid side, and controller remains essential and must be implemented externally.
推荐
Embedded Sensing and IoT Nodes
For smart industrial sensing nodes, the DSPIC33EP256MC506T-E/MR provides local DSP-style signal conditioning - digital filtering of raw ADC streams - before passing processed data over UART, SPI, or CAN to a gateway. The 16-channel ADC handles multi-sensor arrays (temperature, pressure, current) without external multiplexers, and the on-chip op amps buffer high-impedance sensor outputs. Low-power idle and doze modes reduce average consumption in battery-backed or energy-harvesting installations. The 256 KB / 32 KB memory combination supports self-contained firmware update images and local data logging. Firmware should use DMA-driven ADC sampling at fixed intervals to guarantee timestamp consistency across channels in any multi-sensor fusion application.
推荐
推荐产品汇总
工程参考数据： DSPIC33EP256MC506T-E/MR ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | DSPIC33EP256MC506-E/MR | DSPIC33EP256MC506T-I/MR | DSPIC33EP512MC506T-I/MR | DSPIC33EP128MC506T-I/MR |
|---|---|---|---|---|---|
| Package | 64-VQFN (9x9 mm) | 64-VQFN (9x9 mm) - same | 64-VQFN (9x9 mm) - same | 64-VQFN (9x9 mm) - same | 64-VQFN (9x9 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Speed | 60 MIPS | 60 MIPS | 60 MIPS | 60 MIPS | 60 MIPS |
| FLASH Program Memory | 256 KB | 256 KB | 256 KB | 512 KB | 128 KB |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +85C | -40C to +85C | -40C to +85C |
| Packaging | Tape & Reel | Tray | Tape & Reel | Tape & Reel | Tape & Reel |
关键差异点
- Extended temperature range for harsh environments （对比 DSPIC33EP256MC506T-I/MR)
- Full memory density at same footprint （对比 DSPIC33EP128MC506T-I/MR)
- Tape-and-reel delivery for automated assembly （对比 DSPIC33EP256MC506-E/MR)
设计说明
The DSPIC33EP256MC506T-E/MR requires a single 3.0V-3.6V supply. Estimated: at 60 MIPS typical active current of roughly 60-70 mA (check the electrical characteristics table in the manufacturer datasheet for your exact clock configuration), a 3.3V rail dissipates about 0.2W in the controller itself. Place a 10uF bulk capacitor plus 0.1uF ceramic on every VDD pin pair, and connect all VSS pins to a solid ground plane - the 64-VQFN exposes multiple power pins specifically to reduce supply inductance during simultaneous PWM switching events.
Decouple VDDCORE with the recommended external capacitor value from the manufacturer datasheet (a core regulator capacitor is required on dsPIC33EP devices - omitting it prevents startup or causes erratic reset behavior). Keep the analog supply (AVDD) filtered through an ferrite bead or RC from the digital rail, with a local 1uF plus 0.1uF at the pin, to preserve ADC accuracy on motor-current sensing. Route ADC sense traces away from MCPWM output traces to minimize coupling into current-measurement inputs.
Configuration bits (FOSC, FWDT, FICD) determine oscillator source and debugger pin allocation at reset - mismatched CONFIG settings are the most common cause of 'dead' boards. Verify PLL lock status before switching to the fast clock, and enable the watchdog plus clock-fail monitor in production firmware. Also note the T suffix part arrives tape-and-reel: confirm your pick-and-place supports 9x9 mm VQFN 0.5 mm pitch feeds before ordering full reels.
合规信息
AEC-Q100 qualification and the dsPIC 33EP Automotive classification confirmed by distributor listings (Microchip USA, FindIC). RoHS/lead-free typical of current Microchip production; obtain formal certificates from Microchip for specific date codes.
