Microchip Technology

ATTINY88-15AZ - 8KB 28-I/O AVR MCU | Microchip Technology

料号: ATTINY88-15AZ ✓ 量产中
32-pin TQFP Package 15 MHz Speed 8KB Memory
最小起订量: 1 |

ATTINY88-15AZ 概述

The Microchip Technology ATTINY88-15AZ is an automotive-grade, 8-bit AVR RISC microcontroller with 15 MHz operation, 8KB in-system-programmable Flash memory, 64B EEPROM, 512B SRAM, and 28 general-purpose I/O lines in a 32-pin TQFP package.

An 8-bit microcontroller is a compact embedded-processing IC that executes firmware from embedded Flash memory and reads or writes data through EEPROM and SRAM. The ATTINY88 belongs to the TinyAVR hierarchy: 8-bit AVR microcontroller, reduced instruction computer architecture, and embedded control IC. Its picoPower CMOS design targets efficient automotive control applications where deterministic peripheral operation, low pin count, and integrated nonvolatile memory are valuable.

The device combines 8KB of ISP Flash, 64B of EEPROM, and 512B of SRAM. It provides 28 general-purpose I/O lines, 32 general-purpose working registers, and two flexible timer/counters with compare modes. A 123-instruction instruction set includes most instructions executing in a single clock cycle, supporting responsive control-loop and peripheral-timing tasks while retaining the simple programming model of the AVR architecture.

The ATTINY88-15AZ uses the -15AZ suffix for a 15 MHz device and is identified in automotive documentation as an automotive-quality-grade product. Microchip automotive documentation states that the ATtiny88 family was developed according to ISO-TS-16949 grade 1 requirements. The device is offered in the 32-terminal gull-wing TQFP package, with package code HTQFP.

Typical automotive uses include compact body or climate-control modules, sensor interfaces, actuator controllers, lighting modules, and general vehicle electronics. Its 28 I/O lines can support multiple digital inputs, outputs, and communication peripherals without requiring a larger package, while the timers support timing and compare-based functions.

PCB design should preserve the datasheet's pin multiplexing and programming interface requirements. Provide the specified power, decoupling, reset, and programming connections, and verify external peripheral timing against the 15 MHz operating limit. Automotive production should also apply the manufacturer’s qualification, traceability, and change-control requirements.

This page combines the manufacturer’s ATtiny88 documentation with package, interface, lifecycle, programming, and replacement guidance. It also distinguishes true same-footprint alternatives from merely similar AVR devices, helping engineers assess PCB reuse, memory differences, timing compatibility, and automotive qualification before approving a substitution.

直接替换替代料: ATTINY88-15AZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: ATTINY88-15AZ (相同外形与封装尺寸) ——差异在于 Package, SRAM, Product Type, Flash Memory, Architecture.

Microchip Technology
Package: 32-TQFP, 7 mm × 7 mm
SRAM: 256 bytes
Product Type: 8-bit AVR RISC-based microcontroller
对比 ATTINY88-15AZ →
Microchip Technology
Package: 32-TQFP, 7 x 7 mm
SRAM: 512 bytes
Flash Memory: 8 KB (4K x 16)
对比 ATTINY88-15AZ →
Microchip Technology
Package: 32-TQFP, 7 x 7 mm
SRAM: 512 bytes
Flash Memory: 8 KB (4K x 16)
对比 ATTINY88-15AZ →

ATTINY88-15MZ

✅ 直接替换 ⚠️ 规格未核验
📦 32-TQFP
The 15 MHz clock and 8KB Flash match the target exactly; the temperature-grade designation differs and must be checked against the required automotive operating range.

📋 参考替代料(不在目录中)

ATTINY88-AU

✅ 直接替换
Microchip Technology
📦 32-TQFP
8-bit AVR RISC microcontroller · 12 MHz · 8 KB (4K x 16) · In-system programmable flash · 512 bytes · 64 bytes · 28 · 32

联系询价

查看数据手册 →

ATTINY88-AUR

✅ 直接替换 ⚠️ 规格未核验
Microchip Technology
📦 32-TQFP
8-bit AVR RISC microcontroller · 12 MHz · 8 KB (4K x 16) · In-system programmable flash · 512 bytes · 64 bytes · 28 · 32

联系询价

查看数据手册 →

ATTINY48-15AZ

✅ 直接替换 ⚠️ 规格未核验
📦 32-TQFP
The 15 MHz clock and 32-pin TQFP footprint match, but Flash decreases from 8KB to approximately 4KB, a 50% reduction.

📋 参考替代料(不在目录中)

ATTINY48-AU

✅ 直接替换 ⚠️ 规格未核验
Microchip Technology
📦 32-TQFP
8-bit AVR RISC-based microcontroller · AVR 8-bit RISC · 12 MHz · 1.8 V to 5.5 V · Up to 12 MIPS at 12 MHz · 4 KB ISP Flash · 64 bytes · 256 bytes

联系询价

查看数据手册 →

ATTINY88-15AZ 最大额定值与电气特性

Product Type 8-bit AVR RISC microcontroller
Architecture AVR RISC-based CMOS
Maximum Clock Speed 15 MHz
Program Flash Memory 8KB
EEPROM Memory 64B
SRAM 512B
General-Purpose I/O Lines 28
General-Purpose Working Registers 32
Timer/Counter Count 2
Instruction Count 123
Architecture Advanced RISC architecture
封装 32-pin TQFP
Package Code HTQFP
Terminal Count 32
Package Shape Square
Terminal Form Gull wing
Temperature Grade Automotive
Manufacturing Quality Standard ISO-TS-16949 grade 1
Programming Interface In-system programming (ISP)

ATTINY88-15AZ square 引脚配置指南

ATTINY88-15AZ(square 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

ATTINY88-15AZ 的 square 封装引脚图

暂无详细引脚数据: ATTINY88-15AZ.

请参阅 数据手册 以查看完整引脚配置。

典型应用

ATTINY88-15AZ 适用于 6 应用s: Automotive Climate-Control Module, Vehicle Sensor Interface, Automotive Lighting Controller, Compact Actuator Controller, Automotive Body Control Submodule, Standalone Automotive Programming Module.

🚗

Automotive Climate-Control Module

The ATTINY88-15AZ fits a compact vehicle climate-control module because its 28 general-purpose I/O lines can support multiple switch inputs, sensor interfaces, actuator outputs, and status indicators without moving to a larger controller package. Its two flexible timer/counters with compare modes support periodic sampling and actuator timing, while 512B of SRAM supports working state and 64B of EEPROM provides limited nonvolatile configuration storage. The 8KB ISP Flash footprint is sufficient for focused control firmware, although the final image must be size-checked. Its automotive-grade designation and 15 MHz operation make it appropriate for a compact electronic control unit that requires deterministic I/O handling and simple field programming.

🏭

Vehicle Sensor Interface

ATTINY88-15AZ can consolidate several digital and analog-adjacent sensor signals in a vehicle sensor interface because the device provides 28 general-purpose I/O lines and two timer/counters. The timer/counter compare functions can support pulse-width sensing, periodic sampling, timeout management, and sensor-health timing, while the AVR RISC architecture executes most instructions in one clock cycle at the 15 MHz operating rate. Its 8KB Flash stores compact acquisition and filtering code, 512B of SRAM handles active measurements, and 64B of EEPROM can retain limited calibration or configuration values. The automotive grade, 32-pin TQFP package, and ISP programming support fit compact modules requiring controlled production programming.

💡

Automotive Lighting Controller

The ATTINY88-15AZ suits a compact automotive lighting controller where multiple lamps, status outputs, buttons, and diagnostic lines must be managed in one package. Its 28 general-purpose I/O lines reduce the need for external logic, and the two timer/counters can establish blink, fade, or timeout intervals without continuous software delays. At 15 MHz, the AVR RISC processor provides responsive execution for sequencing and fault detection, while 8KB of Flash accommodates a focused lighting routine and 512B of SRAM supports state management. The 32-pin TQFP format simplifies dense multilayer PCB layouts, and the automotive-grade ordering code supports use in qualified vehicle electronics programs.

🔧

Compact Actuator Controller

ATTINY88-15AZ is well matched to a compact actuator controller that coordinates solenoids, relays, motor-control inputs, and end-stop or feedback signals. Its 28 I/O lines allow multiple actuator channels and sensor inputs to remain on the controller, reducing system size and interconnects. The two timer/counters provide timing references for pulse generation, commutation, or actuator travel limits, while the 15 MHz clock allows the firmware to combine those timing tasks with diagnostic and safety-state checks. The 8KB Flash limit favors compact application code, 512B of SRAM supports live control state, and the 32-pin TQFP package provides a defined automotive-style footprint for production assembly.

🚗

Automotive Body Control Submodule

ATTINY88-15AZ can serve as a body-control submodule for localized functions such as door-zone input consolidation, switch monitoring, lamp sequencing, and diagnostic signaling. The 28 general-purpose I/O lines provide a useful balance between I/O density and package size, while the two timer/counters support repetitive automotive functions without excessive processor loading. Its 8KB ISP Flash permits compact field-updatable logic, and 64B of EEPROM can preserve a limited set of configuration values. Operating at 15 MHz with the AVR RISC architecture supports timely event handling, while the 32-pin TQFP package and automotive-grade designation fit a qualified distributed vehicle electronics architecture.

⚡

Standalone Automotive Programming Module

ATTINY88-15AZ can be used in a compact vehicle programming or configuration module that coordinates ISP programming, status indication, and nonvolatile parameter storage. Its 8KB of in-system-programmable Flash can hold a focused programming workflow, while 64B of EEPROM provides a small amount of persistent configuration storage. The 28 I/O lines permit communication, mode selection, and diagnostic signaling, and the two timer/counters can manage activity timing or indicator control. At 15 MHz, firmware can validate commands and manage programming sequences efficiently. The 32-pin TQFP package supports compact board construction, while automotive-grade identification makes the device suitable for qualification within vehicle electronics when the complete module meets its applicable environmental requirements.

What is the ATTINY88-15AZ?
The ATTINY88-15AZ is a Microchip Technology 8-bit AVR RISC microcontroller optimized for automotive embedded-control applications. It operates at 15 MHz and combines 8KB of ISP Flash, 64B of EEPROM, 512B of SRAM, 28 general-purpose I/O lines, 32 working registers, and two timer/counters in a 32-pin TQFP package. The manufacturer’s automotive ATtiny88 datasheet identifies the family as picoPower CMOS and ISO-TS-16949 grade 1.
What are the key specifications of ATTINY88-15AZ that engineers should know?
The ATTINY88-15AZ combines a 15 MHz clock with 8KB of in-system-programmable Flash, 64B of EEPROM, 512B of SRAM, and 28 general-purpose I/O lines. Its AVR RISC-based 8-bit architecture provides 123 instructions, most completing in one clock cycle, while two flexible timer/counters support timing and compare operations. The device uses a 32-pin TQFP package and is classified as an automotive temperature-grade component.
Where can I download the ATTINY88-15AZ datasheet PDF?
The ATTINY88-15AZ datasheet PDF is available through the manufacturer’s automotive ATtiny88 documentation and the official ATTINY88 product page. The automotive datasheet covers device variants, electrical characteristics, package information, and application guidance. Use the manufacturer document for the exact -15AZ ordering code, pin functions, operating limits, and electrical characteristics before releasing a PCB or production firmware.
Where can I find the ATTINY88-15AZ pinout?
The ATTINY88-15AZ pinout is defined in the manufacturer’s ATtiny88 datasheet under the 32-pin TQFP package information. The package has 32 terminals and includes the ATtiny88 power, ground, reset, programming, I/O, and timer/counter connections. Assign PCB nets directly from the datasheet pin-description table rather than relying on generic ATtiny44 or ATtiny85 diagrams, because those packages have different terminal arrangements.
How do I program an ATTINY88-15AZ?
Program the ATTINY88-15AZ through its in-system-programming interface using a compatible AVR programmer and the device’s manufacturer-defined ISP signals. The MCU contains 8KB of ISP Flash and supports the AVR programming architecture. Confirm the exact ISP pin functions, clock source, fuse settings, and reset behavior in the datasheet, and verify that the toolchain supports the ATtiny88 device family before production programming.
Can ATTINY88-15AZ be programmed with Arduino IDE?
The ATTINY88 can be handled with Arduino tooling when a compatible Arduino-compatible core and programmer are installed. Its 8KB Flash capacity is much smaller than the memory commonly assumed for mainstream Arduino boards, so sketches must be size-checked and the selected core must correctly generate code for the ATtiny88 architecture. ISP programming and the manufacturer datasheet should remain the final authority for production programming.
Where to buy ATTINY88-15AZ online?
Use the “Request a Quote” form on this page to request the ATTINY88-15AZ by exact manufacturer part number, quantity, and shipment destination. Confirm the package code and automotive-grade suffix during quotation. Because the -15AZ designation identifies a specific 32-pin TQFP configuration, do not substitute an ATTINY88 variant with a different package or temperature suffix without a formal engineering review.
What is the price of ATTINY88-15AZ?
Current commercial terms for the ATTINY88-15AZ are available through the “Request a Quote” form on this page. The request should include the exact MPN ATTINY88-15AZ, required quantity, target date, and destination. The manufacturer suffix identifies the 15 MHz automotive 32-pin TQFP configuration, so a quotation against a generic ATtiny88 or a different package would not ensure the correct physical part.
What is the lead time and stock status for ATTINY88-15AZ?
Request current stock, minimum order quantity, and lead time through the “Request a Quote” form on this page. Include the exact ATTINY88-15AZ MPN and the required shipping date. Microchip lists the ATTINY88 family as in production, but production status alone does not guarantee immediate stock for every package, grade suffix, or forecast quantity.
What can replace ATTINY88-15AZ?
The closest drop-in candidates identified are ATTINY88-15MZ and ATTINY88-AU in the same 32-pin TQFP footprint, plus ATTINY48-15AZ and ATTINY48-AU, whose principal difference is reduced Flash memory. No cross-brand drop-in replacement is established by the available manufacturer information. Confirm pin functions, clock rating, memory requirements, temperature grade, and automotive qualification before replacing the target.
Is ATTINY88-AU a drop-in replacement for ATTINY88-15AZ?
ATTINY88-AU is a same-family candidate in the 32-pin TQFP package, but it is not an unconditional replacement for ATTINY88-15AZ. The AU suffix does not state the same 15 MHz clock rating in the available listing, while the target includes automotive-grade identification and a 15 MHz designation. Confirm the required operating frequency, temperature range, qualification status, and active production status in the manufacturer documentation.
ATTINY88-15AZ vs ATMEGA8A-AU — which is better for automotive control?
ATTINY88-15AZ is the stronger match when the design specifically targets a 15 MHz automotive-grade 8-bit MCU in a 32-pin TQFP package with 8KB Flash. ATMEGA8A-AU appears in a comparison listing but is not established here as a pin-for-pin ATTINY88 substitute. Choose between them only after checking the ATMEGA package, clock rating, memory map, peripherals, automotive qualification, and every externally connected signal.
When should I choose ATTINY88-15AZ over ATTINY48-15AZ?
Choose ATTINY88-15AZ when the firmware requires the full 8KB Flash capacity because ATTINY48-15AZ provides approximately 4KB, a 50% reduction that can force a smaller code image or external-memory redesign. Both belong to the same manufacturer family and use the 32-pin TQFP format, but memory size can determine whether the original code, bootloader, and calibration data fit without changing the architecture.
Is ATTINY88-15AZ suitable for automotive sensor modules?
The ATTINY88-15AZ is suitable for compact automotive sensor-interface modules that need 28 I/O lines, two timer/counters, 64B of EEPROM, and 8KB of Flash. Its automotive-grade identification and ISO-TS-16949 grade 1 development context support use in automotive programs. The final module must still validate power quality, EMC, environmental limits, communication timing, and production traceability against its own requirements.
What are ATTINY88 projects and typical automotive uses?
ATTINY88 projects commonly center on compact embedded controllers, including automotive climate-control modules, sensor interfaces, actuator controllers, lighting modules, and low-complexity vehicle electronics. Its 28 I/O lines support several inputs and outputs, while two timer/counters can handle periodic timing and compare events. Suitability depends on code size, peripheral requirements, automotive qualification, and the exact -15AZ suffix.

工程参考数据: ATTINY88-15AZ ——对比、设计指导和合规信息。

选型指南

Choose ATTINY88-15AZ when the design requires a 15 MHz automotive-grade AVR controller with 8KB of Flash, 64B of EEPROM, 512B of SRAM, 28 I/O lines, and two timer/counters in a 32-pin TQFP package. ATTINY88-15MZ is the closest same-family candidate when its temperature grade satisfies the vehicle program and the 15 MHz and 8KB Flash ratings are retained. ATTINY88-AU and ATTINY88-AUR share the family and package, but their frequency and qualification requirements should be checked against the exact suffix. ATTINY48-15AZ and ATTINY48-AU are useful only when the application can operate within approximately 4KB of Flash, since their 50% smaller program memory can force firmware or hardware changes. No cross-brand drop-in replacement is established here; a different manufacturer’s MCU should not be treated as interchangeable without complete pin, clock, peripheral, timing, and qualification review.

与替代料对比

参数 本产品 ATTINY88-15MZ ATTINY88-AU ATTINY88-AUR ATTINY48-15AZ ATTINY48-AU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 32-TQFP 32-TQFP 32-TQFP 32-TQFP 32-TQFP 32-TQFP
Program Flash Memory 8KB 8KB 8KB 8KB 4KB 4KB

关键差异点

  • Full 8KB Flash capacity preserves the target firmware envelope (对比 ATTINY48-15AZ)
  • Exact 15 MHz operating designation (对比 ATTINY88-AU)
  • Automotive-grade ordering code for vehicle electronics (对比 ATTINY88-15MZ)
  • High I/O density in a defined 32-pin surface-mount package (对比 ATTINY88-AUR)

设计说明

Assign every net from the manufacturer’s 32-pin TQFP pin-description table rather than from a generic ATtiny84 or ATtiny85 footprint. The ATTINY88 uses 28 general-purpose I/O lines, but several terminals also have alternate peripheral functions. Preserve the datasheet-defined locations for power, ground, reset, and ISP signals, route the programming interface to a reachable test pad or connector, and maintain the required decoupling-capacitor placement close to the supply pins.

Do not approve an alternative solely because its package drawing matches. For ATTINY48 alternatives, account for the reduction from 8KB to 4KB of Flash, which can break the compiled image even if the PCB footprint is unchanged. For ATTINY88-AU variants, verify the clock rating, temperature grade, automotive qualification, fuse defaults, and active lifecycle status. A replacement should receive firmware, timing, and in-circuit programming validation before production release.

Use the manufacturer datasheet for the exact supply-voltage range and operating-current limits before designing the power tree. Because the ATTINY88-15AZ combines automotive temperature-grade identification with a 15 MHz clock and 28 I/O lines, the power supply must remain within all DC and transient limits during startup, reset, and peripheral activity. Confirm the external crystal or clock arrangement and programming behavior against the selected clock configuration.

Keep the 15 MHz clock path compact and follow the manufacturer layout guidance for decoupling and signal return paths. Treat I/O pins carrying external vehicle signals as potentially noisy or high-energy interfaces, and place input protection close to the connector. Avoid long traces between the programming header and MCU, and maintain a continuous ground reference beneath the 32-pin TQFP footprint to reduce susceptibility to coupling and timing disturbance.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Microchip automotive documentation states that the ATtiny88 family was developed according to ISO-TS-16949 grade 1 requirements. Separate RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not established.

数据核验日期: 2026-11-14 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

attiny88 pinout attiny88 arduino ide attiny88 datasheet attiny88 specs attiny88 arduino attiny88 programming attiny88 vs atmega328 attiny88 development board attiny88 projects attiny88 vs attiny85 ATTINY88-15AZ datasheet pdf ATTINY88-15AZ pinout ATTINY88-15AZ replacement ATTINY88-15AZ equivalent ATTINY88-15AZ price

相关元器件 & 术语

Microchip Technology ATTINY88-15AZ ATTINY88 ATTINY48 ATTINY88-15MZ ATTINY88-AU ATTINY88-AUR ATTINY48-15AZ ATTINY48-AU ATtiny88 AVR AVR RISC architecture TinyAVR 8-bit microcontroller embedded control IC reduced instruction computer picoPower CMOS in-system programming ISP Flash memory EEPROM SRAM general-purpose I/O timer/counter 32-pin TQFP HTQFP package surface-mount package ISO-TS-16949 grade 1 automotive electronics
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情