ATXMEGA32C3-MN - 32MHz 32KB Flash MCU | Microchip
料号: ATXMEGA32C3-MN ✓ 量产中ATXMEGA32C3-MN 概述
An AVR XMEGA microcontroller combines an 8-bit AVR-compatible instruction set with a high-performance 32 MHz pipeline and an event system designed to transfer events directly between peripherals. This architecture belongs to the broader microcontroller hierarchy: embedded controller, general-purpose MCU, AVR core, and system-on-chip. It is useful when a design needs deterministic peripheral coordination without relying on frequent central-processor intervention.
The ATXMEGA32C3 includes 32 KB of Flash memory, with 8 KB reserved as a boot-code section, and supports read-while-write operation. Its 2 KB EEPROM provides nonvolatile storage for configuration parameters, while 4 KB of SRAM supports stack, buffering, and real-time processing. The four-channel event system allows communication between timers, analog comparators, pin-change functions, and other interrupt-capable peripherals.
The 64-pin VQFN package exposes substantially more I/O than a small leaded MCU package, supporting integration of communications, control inputs, analog functions, and debug functions on a compact surface-mount footprint. Its 32 MHz operating speed provides additional timing margin for protocol handling and control loops. The exposed thermal pad improves heat transfer from the device into the PCB copper plane.
Typical uses include industrial control modules, sensor nodes, building automation, compact data acquisition, motor or actuator supervision, and communications-enabled embedded products. The combination of EEPROM, SRAM, Flash, event handling, and a large pin count makes the device suitable for designs that need local configuration storage, moderate real-time processing, and numerous peripheral connections.
PCB design should preserve the exposed-pad land pattern, connect the thermal and ground structure as specified by the package drawing, and route high-current or sensitive signals away from the MCU clock and power pins. Firmware design should use the event system for latency-sensitive peripheral links, while the processor handles supervisory logic and protocol tasks. The ATXMEGA32C3-MN is a surface-mount component intended for automated assembly.
This page consolidates the manufacturer specifications, package details, design considerations, application guidance, and verified sourcing information into an engineering-focused reference for evaluating the ATXMEGA32C3-MN in new embedded designs.
直接替换替代料: ATXMEGA32C3-MN ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料ATXMEGA32C3-MN 最大额定值与电气特性
| Product Type | 8/16-bit AVR XMEGA microcontroller |
| Maximum Clock Speed | 32 MHz |
| Flash Memory | 32 KB |
| Boot Code Section | 8 KB |
| EEPROM | 2 KB |
| SRAM | 4 KB |
| Flash Read-While-Write | Supported |
| Event System | 4 channels |
| Operating Voltage | 1.6 V to 3.6 V |
| Nominal Supply Voltage | 3.3 V |
| Maximum Operating Temperature | 105 °C |
| 封装 | 64-pin VQFN with exposed pad |
| 引脚数量 | 64 pins |
| 安装类型 | Surface mount |
| Manufacturing Color Category | Green |
| RoHS 状态 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
| Programming | In-system programmable Flash |
ATXMEGA32C3-MN 64-pin vqfn with exposed pad 引脚配置指南
ATXMEGA32C3-MN(64-pin vqfn with exposed pad 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: ATXMEGA32C3-MN.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ATXMEGA32C3-MN 适用于 6 应用s: Industrial Sensor and Control Module, Building Automation Controller, Compact Data Acquisition System, Communications-Enabled Embedded Node, Actuator and Motor Supervision, Low-Voltage Portable Instrument.
Industrial Sensor and Control Module
The ATXMEGA32C3-MN fits compact sensing and control modules that need more processing capability and I/O than a small leaded MCU package provides. Its 32 MHz clock supports responsive control loops, while 2 KB of EEPROM can retain calibration constants, serial numbers, and operating parameters without consuming Flash. The four-channel event system can coordinate timing-sensitive peripheral events with less polling. In a 24 V industrial input design, a separate regulator would provide the required 1.6 V to 3.6 V MCU rail, while optoisolation, surge protection, and grounding would be handled outside the device.
推荐
Building Automation Controller
The ATXMEGA32C3-MN is appropriate for building automation controllers that coordinate digital inputs, actuator outputs, communications, and local configuration. Its 64-pin VQFN interface offers a broad pin count for control signals while the exposed pad supports thermal transfer into the PCB ground plane. EEPROM preserves room configuration and device settings across power cycles, and the 32 MHz core provides margin for protocol tasks and debounce handling. The design should isolate long field wiring, use robust connectors, and keep switching and communication transients away from sensitive MCU supply routing.
推荐
Compact Data Acquisition System
The ATXMEGA32C3-MN can serve as the control MCU in a compact data-acquisition system where sensor conditioning, conversion, and buffering must be coordinated with local processing. Its 32 MHz operating rate supports efficient peripheral management, while 4 KB of SRAM provides working memory for control structures and short data buffers. Flash can hold application code and calibration tables, and EEPROM can store configuration identifiers. The event system is useful for connecting timing-critical sampler or comparator events without relying entirely on main-loop polling.
推荐
Communications-Enabled Embedded Node
The ATXMEGA32C3-MN suits communications-enabled embedded nodes that must coordinate a serial interface with local sensing and digital outputs. Its 32 MHz speed gives protocol firmware processing margin, and the four-channel event system can connect timer, interrupt, and peripheral events directly. Sixteen kilobytes of the 32 KB Flash region is outside the stated 8 KB boot-code section, allowing a practical separation between boot logic and application code where supported by the programming configuration. Board design should provide clean clock routing, controlled impedance, and a stable low-noise supply.
推荐
Actuator and Motor Supervision
The ATXMEGA32C3-MN can supervise actuators, relays, motor-control interfaces, and safety-oriented digital I/O in compact equipment. Its 32 MHz processing rate supports timely state-machine execution, while the event system helps coordinate timers and external events that must not wait for routine polling. Two kilobytes of EEPROM is useful for retaining operating counters, configuration values, and diagnostic information. A production design must add appropriate driver transistors, flyback protection, current sensing, fault isolation, and shutdown behavior around the MCU.
推荐
Low-Voltage Portable Instrument
The ATXMEGA32C3-MN can support low-voltage portable instruments that combine local control, data storage, and human-interface signals in a small surface-mount assembly. The 1.6 V to 3.6 V operating range allows integration with low-voltage power systems, while Flash and EEPROM separate executable code from persistent settings. At 32 MHz, the MCU can service time-critical tasks and serial command handling without requiring a larger external processor. Designers should use the package exposed pad as part of the PCB thermal and ground structure and verify current consumption across clock and peripheral operating modes.
推荐
推荐产品汇总
工程参考数据: ATXMEGA32C3-MN ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Microchip Technology |
| Package | 64-pin VQFN with exposed pad |
| Maximum Clock Speed | 32 MHz |
| Flash Memory | 32 KB |
| Boot Code Section | 8 KB |
| EEPROM | 2 KB |
| SRAM | 4 KB |
| Operating Voltage | 1.6 V to 3.6 V |
| Maximum Operating Temperature | 105 °C |
| Event System | 4 channels |
| Mounting Type | Surface mount |
设计说明
Implement the 64-pin VQFN footprint directly from the official Microchip package drawing and land-pattern guidance. Keep the exposed-pad land accessible to the PCB thermal and electrical structure, use a solder mask opening appropriate for assembly inspection, and verify paste volume for the thermal pad. Because there is no 64-pin VQFN entry in the supported package-diagram library, this page does not publish a generated pin map; use the manufacturer pin-description table when assigning tracks.
Design the MCU supply for the full 1.6 V to 3.6 V operating range and place local decoupling close to the supply and ground pins. Route the return path through or beneath the device region to minimize loop area and impedance. Use separate filtering paths for noisy external loads, and avoid sharing narrow supply traces with motors, relays, or switching regulators. Confirm startup, brownout, and supply-transient behavior across the complete firmware operating state.
Preserve a short, continuous return path for clock and high-speed communication signals, and keep them away from switching nodes and the exposed thermal-pad perimeter. The exposed pad should connect to the intended ground reference using the package instruction, while high-current return paths should not be forced through the MCU pad area. Check the official recommended PCB layout, programming-interface clearance, and analog-input routing requirements before fabrication.
Do not treat a similar AVR family member, another package suffix, or a part with a matching nominal clock speed as an automatic replacement. Firmware compatibility can depend on peripheral mapping, boot behavior, interrupt vectors, Flash organization, and pin multiplexing. For the ATXMEGA32C3-MN, verify the device identification, Fuse and Lock bits, clock calibration, brownout settings, and programming interface as part of a controlled bring-up procedure.
合规信息
The component is described as green in distributor product information, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was established. Confirm compliance documents for the exact ordering code before production release.