Microchip Technology

ATXMEGA32C3-MN - 32MHz 32KB Flash MCU | Microchip

부품 번호: ATXMEGA32C3-MN ✓ 활성
1.6 V to 3.6 V Vdss 64-pin VQFN with exposed pad Package 32 MHz Speed 32 KB Memory
MOQ: 1 |

ATXMEGA32C3-MN 개요

The Microchip ATXMEGA32C3-MN is a 32 MHz AVR XMEGA 8/16-bit microcontroller with 32 KB of in-system programmable Flash memory, 2 KB of EEPROM, 4 KB of SRAM, and a 64-pin VQFN package with an exposed pad. It operates from a 1.6 V to 3.6 V supply, providing a compact solution for embedded control, communication, and low-power applications.

An AVR XMEGA microcontroller combines an 8-bit AVR-compatible instruction set with a high-performance 32 MHz pipeline and an event system designed to transfer events directly between peripherals. This architecture belongs to the broader microcontroller hierarchy: embedded controller, general-purpose MCU, AVR core, and system-on-chip. It is useful when a design needs deterministic peripheral coordination without relying on frequent central-processor intervention.

The ATXMEGA32C3 includes 32 KB of Flash memory, with 8 KB reserved as a boot-code section, and supports read-while-write operation. Its 2 KB EEPROM provides nonvolatile storage for configuration parameters, while 4 KB of SRAM supports stack, buffering, and real-time processing. The four-channel event system allows communication between timers, analog comparators, pin-change functions, and other interrupt-capable peripherals.

The 64-pin VQFN package exposes substantially more I/O than a small leaded MCU package, supporting integration of communications, control inputs, analog functions, and debug functions on a compact surface-mount footprint. Its 32 MHz operating speed provides additional timing margin for protocol handling and control loops. The exposed thermal pad improves heat transfer from the device into the PCB copper plane.

Typical uses include industrial control modules, sensor nodes, building automation, compact data acquisition, motor or actuator supervision, and communications-enabled embedded products. The combination of EEPROM, SRAM, Flash, event handling, and a large pin count makes the device suitable for designs that need local configuration storage, moderate real-time processing, and numerous peripheral connections.

PCB design should preserve the exposed-pad land pattern, connect the thermal and ground structure as specified by the package drawing, and route high-current or sensitive signals away from the MCU clock and power pins. Firmware design should use the event system for latency-sensitive peripheral links, while the processor handles supervisory logic and protocol tasks. The ATXMEGA32C3-MN is a surface-mount component intended for automated assembly.

This page consolidates the manufacturer specifications, package details, design considerations, application guidance, and verified sourcing information into an engineering-focused reference for evaluating the ATXMEGA32C3-MN in new embedded designs.

드롭인 대체품: ATXMEGA32C3-MN — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 제품에는 사용 가능한 드롭인 대체품이 없습니다.

대체품 요청

ATXMEGA32C3-MN 최대 정격 & 전기적 특성

Product Type 8/16-bit AVR XMEGA microcontroller
Maximum Clock Speed 32 MHz
Flash Memory 32 KB
Boot Code Section 8 KB
EEPROM 2 KB
SRAM 4 KB
Flash Read-While-Write Supported
Event System 4 channels
Operating Voltage 1.6 V to 3.6 V
Nominal Supply Voltage 3.3 V
Maximum Operating Temperature 105 °C
패키지 64-pin VQFN with exposed pad
핀 수 64 pins
실장 유형 Surface mount
Manufacturing Color Category Green
RoHS 상태 unknown
REACH Status unknown
AEC-Q100 Qualification unknown
Programming In-system programmable Flash

ATXMEGA32C3-MN 64-pin vqfn with exposed pad 핀 구성 가이드

ATXMEGA32C3-MN(64-pin vqfn with exposed pad 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

ATXMEGA32C3-MN의 64-pin vqfn with exposed pad 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ATXMEGA32C3-MN.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ATXMEGA32C3-MN 적합 용도: 6 애플리케이션s: Industrial Sensor and Control Module, Building Automation Controller, Compact Data Acquisition System, Communications-Enabled Embedded Node, Actuator and Motor Supervision, Low-Voltage Portable Instrument.

🏭

Industrial Sensor and Control Module

The ATXMEGA32C3-MN fits compact sensing and control modules that need more processing capability and I/O than a small leaded MCU package provides. Its 32 MHz clock supports responsive control loops, while 2 KB of EEPROM can retain calibration constants, serial numbers, and operating parameters without consuming Flash. The four-channel event system can coordinate timing-sensitive peripheral events with less polling. In a 24 V industrial input design, a separate regulator would provide the required 1.6 V to 3.6 V MCU rail, while optoisolation, surge protection, and grounding would be handled outside the device.

🏠

Building Automation Controller

The ATXMEGA32C3-MN is appropriate for building automation controllers that coordinate digital inputs, actuator outputs, communications, and local configuration. Its 64-pin VQFN interface offers a broad pin count for control signals while the exposed pad supports thermal transfer into the PCB ground plane. EEPROM preserves room configuration and device settings across power cycles, and the 32 MHz core provides margin for protocol tasks and debounce handling. The design should isolate long field wiring, use robust connectors, and keep switching and communication transients away from sensitive MCU supply routing.

📊

Compact Data Acquisition System

The ATXMEGA32C3-MN can serve as the control MCU in a compact data-acquisition system where sensor conditioning, conversion, and buffering must be coordinated with local processing. Its 32 MHz operating rate supports efficient peripheral management, while 4 KB of SRAM provides working memory for control structures and short data buffers. Flash can hold application code and calibration tables, and EEPROM can store configuration identifiers. The event system is useful for connecting timing-critical sampler or comparator events without relying entirely on main-loop polling.

🌐

Communications-Enabled Embedded Node

The ATXMEGA32C3-MN suits communications-enabled embedded nodes that must coordinate a serial interface with local sensing and digital outputs. Its 32 MHz speed gives protocol firmware processing margin, and the four-channel event system can connect timer, interrupt, and peripheral events directly. Sixteen kilobytes of the 32 KB Flash region is outside the stated 8 KB boot-code section, allowing a practical separation between boot logic and application code where supported by the programming configuration. Board design should provide clean clock routing, controlled impedance, and a stable low-noise supply.

⚙️

Actuator and Motor Supervision

The ATXMEGA32C3-MN can supervise actuators, relays, motor-control interfaces, and safety-oriented digital I/O in compact equipment. Its 32 MHz processing rate supports timely state-machine execution, while the event system helps coordinate timers and external events that must not wait for routine polling. Two kilobytes of EEPROM is useful for retaining operating counters, configuration values, and diagnostic information. A production design must add appropriate driver transistors, flyback protection, current sensing, fault isolation, and shutdown behavior around the MCU.

🔧

Low-Voltage Portable Instrument

The ATXMEGA32C3-MN can support low-voltage portable instruments that combine local control, data storage, and human-interface signals in a small surface-mount assembly. The 1.6 V to 3.6 V operating range allows integration with low-voltage power systems, while Flash and EEPROM separate executable code from persistent settings. At 32 MHz, the MCU can service time-critical tasks and serial command handling without requiring a larger external processor. Designers should use the package exposed pad as part of the PCB thermal and ground structure and verify current consumption across clock and peripheral operating modes.

What are the key specifications of ATXMEGA32C3-MN that engineers should know?
The ATXMEGA32C3-MN is a 32 MHz AVR XMEGA microcontroller with 32 KB of programmable Flash, 2 KB of EEPROM, 4 KB of SRAM, and a four-channel event system in a 64-pin VQFN package. According to the Microchip ATxmega32C3 product page, the device also supports read-while-write Flash operation and operates from 1.6 V to 3.6 V. Its exposed-pad package and 64-pin interface make it particularly appropriate for compact embedded systems requiring substantial peripheral connectivity.
What is the operating voltage of ATXMEGA32C3-MN?
The ATXMEGA32C3-MN operates from 1.6 V to 3.6 V, with 3.3 V identified as its nominal operating voltage. According to the Microchip ATxmega32C3 product page and manufacturer documentation, this voltage range supports low-voltage embedded systems. The PCB power design should use a regulator capable of the required current and should account for the combined demand of the MCU, external loads, and any attached communication or sensing circuits.
Where can I download the ATXMEGA32C3-MN datasheet PDF?
The official Microchip ATxmega32C3 product page is the primary location for the ATXMEGA32C3-MN datasheet, package information, and device documentation. It identifies the MCU as a 32 MHz AVR XMEGA device with 32 KB Flash, 2 KB EEPROM, 4 KB SRAM, and a 64-pin VQFN package. Use the manufacturer documentation rather than relying on a secondary summary when assigning pins, programming the device, or designing the exposed-pad land pattern.
Where is the ATXMEGA32C3-MN pinout located?
The ATXMEGA32C3-MN pinout is documented in the pin-description and package-drawing sections of the Microchip ATxmega32C3 manufacturer documentation. The device uses a 64-pin VQFN package with an exposed pad. Because the complete numbered pin table is not established for this page, engineers should use the official package drawing and pin-description table for PCB land patterns, power connections, programming access, and exposed-pad termination.
How much Flash memory and SRAM does ATXMEGA32C3-MN have?
The ATXMEGA32C3-MN provides 32 KB of in-system programmable Flash memory and 4 KB of SRAM. The Microchip ATxmega32C3 product page also identifies an 8 KB boot-code section within the Flash configuration and states that read-while-write operation is supported. This combination gives the firmware both nonvolatile program storage and enough RAM for typical protocol handling, local buffering, and real-time control tasks.
What is the four-channel event system in ATXMEGA32C3-MN used for?
The four-channel event system in the ATXMEGA32C3-MN supports direct peripheral-to-peripheral event routing and reduces the processor intervention required for time-critical signaling. According to the Microchip ATxmega32C3 product description, the event system is a defining feature of the XMEGA architecture. It is useful for coordinating timers, analog comparators, pin-change events, and other peripherals when deterministic event relationships are more important than polling every input in the main loop.
Can ATXMEGA32C3-MN be used for low-power embedded control?
The ATXMEGA32C3-MN is suitable for low-voltage embedded control, operating from 1.6 V to 3.6 V while providing 32 KB of Flash and 2 KB of EEPROM for local program and configuration storage. The 32 MHz operating speed allows useful processing margin, while the event system can reduce processor polling overhead. Final power consumption depends on the selected clock configuration, active peripherals, external circuitry, and the device operating mode.
What is the best drop-in replacement for ATXMEGA32C3-MN?
A drop-in replacement for the ATXMEGA32C3-MN must retain the 64-pin VQFN footprint, exposed pad, pin functions, memory organization, voltage range, clock architecture, and programming requirements. The cross-reference search does not identify a defensible substitute that satisfies all of those conditions, so no replacement is recommended without a device-by-device engineering review. Suffix and packing changes alone do not establish drop-in compatibility.
What can replace ATXMEGA32C3-MN on the same PCB?
No verified pin-compatible replacement for the ATXMEGA32C3-MN is established by the available cross-reference information. A candidate should be accepted only after its 64-pin VQFN land pattern, exposed-pad connection, supply limits, peripheral mapping, Flash and SRAM organization, interrupt behavior, and programming interface have all been compared with the Microchip device. This avoids treating a similar specification summary as proof of drop-in replacement.
When should I choose ATXMEGA32C3-MN instead of another 8/16-bit MCU?
Choose the ATXMEGA32C3-MN when the design benefits from a 32 MHz AVR XMEGA core, 32 KB of programmable Flash, 2 KB of EEPROM, 4 KB of SRAM, and direct event-driven peripheral coordination. Its 64-pin VQFN interface supports more external connections than compact leaded MCU packages. Compare this combination against a candidate MCU's exact peripheral mapping, memory endurance, package dimensions, toolchain support, and qualification requirements before releasing the design.
Is ATXMEGA32C3-MN suitable for industrial sensor and control modules?
The ATXMEGA32C3-MN is well suited to compact sensor and control modules because it combines 32 MHz processing with 2 KB of EEPROM for configuration data, 4 KB of SRAM for working memory, and a four-channel event system. The 1.6 V to 3.6 V operating range also supports low-voltage system design. Industrial suitability should be confirmed against the specific environmental, EMC, lifecycle, and qualification requirements of the finished product.
Where can I buy ATXMEGA32C3-MN and check current stock?
Use the Request a Quote form on this page to request ATXMEGA32C3-MN availability, current lead time, order quantity, and shipment options. The component is specified as a tray-packaged 64-pin VQFN device, but production schedule and stock can change. The form is the appropriate channel for obtaining a current quotation and confirming the exact MPN, package suffix, and delivery quantity.
What is the price of ATXMEGA32C3-MN?
Current ATXMEGA32C3-MN pricing depends on order quantity, delivery schedule, and supply status. Use the Request a Quote form on this page for a current quotation tied to the exact 64-pin VQFN MPN. No static price figure is used because rapidly changing component pricing can become inaccurate. Quote requests should specify required quantity, target delivery date, acceptable packaging, and whether multiple production lots are needed.
What is the lead time for ATXMEGA32C3-MN?
The current ATXMEGA32C3-MN lead time should be requested through the Request a Quote form on this page. Lead time can depend on the quantity ordered, scheduled factory allocation, and required delivery date. Providing a forecast, requested delivery date, and approved manufacturer-part-number requirement helps procurement determine an accurate schedule and confirm whether additional volume commitments are needed.
Is ATXMEGA32C3-MN in stock?
Current ATXMEGA32C3-MN inventory is confirmed through the Request a Quote form on this page. Because stock levels and production allocations can change rapidly, an inventory statement should be tied to a quotation response rather than treated as a permanent specification. State the required tray quantity and target delivery date when requesting availability, and request confirmation that the shipment uses the exact ATXMEGA32C3-MN ordering code.
What is the best Microchip equivalent for ATXMEGA32C3-MN?
No verified Microchip equivalent can be identified as a true drop-in alternative for the ATXMEGA32C3-MN because the available cross-reference material does not establish identical pin compatibility and parameter coverage. Parts in the wider AVR or XMEGA families may differ in Flash, SRAM, package dimensions, peripheral mix, or pin assignment. Request a manufacturer comparison and inspect the official package drawings before treating any nearby family member as equivalent.

엔지니어링 참조 데이터: ATXMEGA32C3-MN — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the ATXMEGA32C3-MN when a design needs a 32 MHz AVR XMEGA controller with 32 KB of programmable Flash, 2 KB of EEPROM, 4 KB of SRAM, event-driven peripheral coordination, and a 64-pin VQFN interface. It is especially useful for compact industrial, building-automation, data-acquisition, communications-node, and actuator-supervision products where a low-pin-count MCU would be restrictive. Select another microcontroller instead when the candidate offers a verified identical 64-pin VQFN land pattern, compatible peripheral mapping, equivalent memory organization, and a suitable development ecosystem. Do not choose a replacement solely because it shares the XMEGA family name, clock speed, or a similar package description. No verified drop-in alternative is listed, so any substitution requires comparison of the manufacturer package drawing, pin table, electrical limits, programming process, firmware dependencies, and qualification requirements.

대체품과의 비교

파라미터 이 제품
Brand Microchip Technology
Package 64-pin VQFN with exposed pad
Maximum Clock Speed 32 MHz
Flash Memory 32 KB
Boot Code Section 8 KB
EEPROM 2 KB
SRAM 4 KB
Operating Voltage 1.6 V to 3.6 V
Maximum Operating Temperature 105 °C
Event System 4 channels
Mounting Type Surface mount

설계 노트

Implement the 64-pin VQFN footprint directly from the official Microchip package drawing and land-pattern guidance. Keep the exposed-pad land accessible to the PCB thermal and electrical structure, use a solder mask opening appropriate for assembly inspection, and verify paste volume for the thermal pad. Because there is no 64-pin VQFN entry in the supported package-diagram library, this page does not publish a generated pin map; use the manufacturer pin-description table when assigning tracks.

Design the MCU supply for the full 1.6 V to 3.6 V operating range and place local decoupling close to the supply and ground pins. Route the return path through or beneath the device region to minimize loop area and impedance. Use separate filtering paths for noisy external loads, and avoid sharing narrow supply traces with motors, relays, or switching regulators. Confirm startup, brownout, and supply-transient behavior across the complete firmware operating state.

Preserve a short, continuous return path for clock and high-speed communication signals, and keep them away from switching nodes and the exposed thermal-pad perimeter. The exposed pad should connect to the intended ground reference using the package instruction, while high-current return paths should not be forced through the MCU pad area. Check the official recommended PCB layout, programming-interface clearance, and analog-input routing requirements before fabrication.

Do not treat a similar AVR family member, another package suffix, or a part with a matching nominal clock speed as an automatic replacement. Firmware compatibility can depend on peripheral mapping, boot behavior, interrupt vectors, Flash organization, and pin multiplexing. For the ATXMEGA32C3-MN, verify the device identification, Fuse and Lock bits, clock calibration, brownout settings, and programming interface as part of a controlled bring-up procedure.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The component is described as green in distributor product information, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was established. Confirm compliance documents for the exact ordering code before production release.

관련 검색

ATXMEGA32C3-MN ATXMEGA32C3-MN datasheet ATXMEGA32C3-MN datasheet pdf ATXMEGA32C3-MN pinout ATXMEGA32C3-MN specifications ATXMEGA32C3-MN equivalent ATXMEGA32C3-MN replacement ATXMEGA32C3-MN 64 pin VQFN ATXMEGA32C3-MN 32MHz 32KB flash ATXMEGA32C3-MN price ATXMEGA32C3-MN stock Microchip ATXMEGA32C3-MN ATXMEGA32C3-MN industrial controller ATXMEGA32C3-MN footprint What can replace ATXMEGA32C3-MN?

관련 부품 & 용어

Microchip Technology ATXMEGA32C3-MN ATxmega32C3 AVR XMEGA AVR microcontroller 8/16-bit microcontroller 32 MHz 32 KB Flash memory 8 KB boot code section 2 KB EEPROM 4 KB SRAM read-while-write four-channel event system 1.6 V to 3.6 V 3.3 V 64-pin VQFN exposed pad surface mount industrial control building automation data acquisition communications node actuator supervision RoHS REACH
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기