Texas Instruments

CD4040BM - 12-Bit CMOS Binary Counter | Texas Instruments

料号: CD4040BM ✓ 量产中
3 V to 18 V Vdss 16-pin SOIC Package 24 MHz Speed
最小起订量: 1 |

CD4040BM 概述

Texas Instruments CD4040BM is a CMOS 12-stage ripple-carry binary counter and divider with 12 output stages, negative-edge triggering, and a 16-pin SOIC package. It provides one binary counter element, 3 V to 18 V operation, and operation up to 24 MHz, making it suitable for frequency division, timing generation, and sequential digital control.

A binary counter is a sequential logic circuit that records the number of applied clock events and presents that count through digital outputs. A ripple-carry counter advances through its stages sequentially, while a divider derives a lower-frequency clock by selecting a corresponding output stage. Within the broader logic hierarchy, the CD4040BM belongs to the CMOS counter family, falls under counter and divider logic, and ultimately operates as a general-purpose digital semiconductor.

The CD4040BM combines a 12-bit counting section with a separate clock input and an asynchronous master reset. Its negative-edge counting behavior means the displayed count changes when the active clock transitions from high to low. The device is designed for a 3 V to 18 V supply, allowing operation from conventional 5 V systems through higher-voltage industrial interfaces. Its 24 MHz maximum operating frequency provides useful timing margin for divide-by-2 through divide-by-4096 clock-generation systems.

Ripple-carry implementation favors a straightforward architecture with 12 available count outputs. At lower division ratios, the delay between adjacent stages can affect timing, so designers should account for cumulative propagation delay when driving multiple clocks from the outputs. The clock inputs also provide a choice between the main clock terminal and an independent clock-input terminal for common counter configurations. An active-high master reset clears the count for initialization and repeatable sequencing.

Typical applications include programmable timers, digital frequency dividers, pulse and delay generation, industrial sequence controllers, and laboratory test equipment. The 12 output stages can divide a periodic input by powers of two, making the part especially useful when a clean, integer-ratio clock is required. The 16-SOIC package supports conventional surface-mount assembly while providing enough pins for the count outputs, supply rails, clock sources, and reset control.

When laying out a circuit, place the reset and clock traces away from the Q0 through Q11 output nets, provide a stable local supply connection, and maintain compatible logic levels between the driver and counter. Designers should check maximum clock frequency at the actual supply voltage because operating speed and supply voltage are related. The counter should also be reset before enabling a new counting sequence when deterministic starting state is required.

This product page consolidates the manufacturer identification, package information, operating limits, functional characteristics, application guidance, cross-reference findings, and practical design considerations into an engineering-focused selection resource for counters and dividers.

直接替换替代料: CD4040BM ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: CD4040BM (相同外形与封装尺寸) ——差异在于 Counter Type, Logic Family, Mounting Type, Package.

onsemi
Counter Type: 12-stage binary ripple-carry counter
Logic Family: CMOS CD4000 series
Mounting Type: Surface-mount package
对比 CD4040BM →

SN74LV4040AD

✅ 直接替换
📦 SOIC-16
Same 12-stage counter function and pin-compatible 16-pin package, but the SN74LV supply-voltage range differs from the CD4040BM 3 V to 18 V range

📋 参考替代料(不在目录中)

CD4040BM 最大额定值与电气特性

Counter Type Binary counter and divider
Architecture Ripple-carry
Number of Counter Elements 1 element
Number of Stages 12 stages
Counting Width 12 bit
Counting Edge Negative edge
Supply Voltage Range 3 V to 18 V
最大时钟频率 24 MHz
Logic Family CMOS
封装 16-pin SOIC
安装类型 Surface mount
Master Reset Asynchronous reset
Counter Outputs 12 outputs, Q0 through Q11
Clock Inputs 2 clock inputs

CD4040BM 引脚配置

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
引脚 1 CLK — Main clock input
引脚 2 CLK IN — Independent clock input
引脚 3 CLR — Asynchronous counter clear input
引脚 4 Q0 — Counter output Q0
引脚 5 Q1 — Counter output Q1
引脚 6 Q2 — Counter output Q2
引脚 7 Q3 — Counter output Q3
引脚 8 VSS — Ground reference
引脚 9 Q9 — Counter output Q9
引脚 10 Q8 — Counter output Q8
引脚 11 Q7 — Counter output Q7
引脚 12 Q6 — Counter output Q6
引脚 13 Q5 — Counter output Q5
引脚 14 Q4 — Counter output Q4
引脚 15 VDD — Positive power supply
引脚 16 MR — Master reset input

典型应用

CD4040BM 适用于 6 应用s: Programmable Clock Divider, Industrial Sequence Controller, Pulse and Delay Generator, Frequency Measurement Divider, Digital Control State Sequencer, Test and Measurement Timing Base.

⚡

Programmable Clock Divider

The CD4040BM is suitable for generating divided clock signals in timer, pulse-generation, and digital-control systems. Its 12 ripple-carry stages provide power-of-two division ratios, allowing Q0 through Q11 to support divide-by-2 through divide-by-4096 outputs from one input clock. With a 3 V to 18 V supply range and operation up to 24 MHz, the device supports both 5 V and higher-voltage logic systems. The counter advances on the negative clock edge and can be initialized with its asynchronous master reset. When using a high-order output, verify the cumulative ripple delay against downstream setup and hold requirements rather than relying only on the 24 MHz input-frequency limit.

🏭

Industrial Sequence Controller

The CD4040BM can provide a compact sequential timing element for industrial control boards that divide an incoming event clock and derive multiple time or phase slots. Its 12 count outputs expose successive power-of-two intervals, while asynchronous master reset returns the sequence to a known state. The 3 V to 18 V operating range permits use with systems operating at 5 V and compatible higher-voltage interfaces. For industrial deployment, keep clock and reset traces short, bypass the supply locally, and confirm the exact device temperature rating and qualification status. The ripple-carry architecture is practical for low-to-moderate frequency sequencing but requires timing checks when several stages feed time-critical circuitry.

🔧

Pulse and Delay Generator

The CD4040BM can divide a repetitive pulse train into longer intervals for retriggerable timers, delay stages, and periodic event generators. Selecting Q5, for example, creates a substantially longer interval than Q0 while retaining an integer relationship to the source clock. Negative-edge counting and the independent clock-input terminal provide flexibility in how the source clock is connected. The maximum operating frequency of 24 MHz leaves useful headroom below the input limit, but propagation delay through multiple ripple stages determines when the selected output changes. Reset the counter before each intended measurement sequence when an exact zero-count starting state is required, and validate timing across the complete operating supply range.

📡

Frequency Measurement Divider

The CD4040BM is useful as a range-extension divider ahead of slower counting or display circuitry in a frequency-measurement instrument. Dividing the input by a selected power of two reduces the frequency presented to downstream logic, making 12 count outputs available for different measurement ranges. Its CMOS implementation operates from 3 V to 18 V and supports input frequencies up to 24 MHz, covering many low- and mid-frequency signal sources. The main design constraint is accumulated ripple delay: a higher-order output transitions later than lower-order outputs. Use a clean, low-jitter reference clock, provide local supply bypassing, and compare the selected division ratio with the acquisition time required by the downstream measurement system.

🖥️

Digital Control State Sequencer

The CD4040BM can act as a state counter in control logic that advances through successive binary states on each clock event. The 12 outputs provide visibility into multiple state boundaries, allowing gates or data selectors to produce predictable step sequences. An asynchronous reset gives the controller a defined startup state and supports repeatable test cycles. The device's 16-pin SOIC package is convenient for conventional PCB assembly, while the 3 V to 18 V range supports several logic-voltage environments. Designers should ensure that only one clock-transition path drives the selected input, observe setup and hold timing around reset, and avoid treating simultaneously changing ripple outputs as glitch-free if a downstream latch requires simultaneous data updates.

🔬

Test and Measurement Timing Base

The CD4040BM can serve as a divide-down element in bench instruments that require a stable timing reference derived from a higher-frequency oscillator. The 12 available outputs make it possible to select a convenient integer division ratio while keeping the source oscillator isolated from slower measurement logic. Operation up to 24 MHz and a 3 V to 18 V supply range support common laboratory clock architectures. The input oscillator should have low jitter and clean transitions because the divided output inherits timing uncertainty from the source. A local bypass capacitor and short clock route reduce supply noise and reflections. Before using the counter as a precision time base, evaluate propagation delay, reset behavior, and temperature-dependent timing across the complete measurement range.

推荐产品汇总

CD4040BM Texas Instruments 用于: Programmable Clock Divider, Industrial Sequence Controller, Pulse and Delay Generator, Frequency Measurement Divider, Digital Control State Sequencer, Test and Measurement Timing Base CD4040BM96 Same counter function with an alternate manufacturer order suffix 用于: Programmable Clock Divider, Industrial Sequence Controller, Pulse and Delay Generator, Frequency Measurement Divider, Digital Control State Sequencer, Test and Measurement Timing Base
What is the Texas Instruments CD4040BM?
The Texas Instruments CD4040BM is a CMOS 12-stage ripple-carry binary counter and divider packaged in a 16-pin SOIC. It has one 12-bit counting element, 12 count outputs, two clock inputs, and negative-edge counting behavior. According to the manufacturer product page, it is intended for binary counting and frequency-division functions across a 3 V to 18 V supply range.
What are the key specifications of CD4040BM that engineers should know?
The CD4040BM is a 12-bit, 12-stage CMOS ripple-carry counter with a 3 V to 18 V supply range and a maximum operating frequency of 24 MHz. It provides negative-edge counting, asynchronous master reset, two clock inputs, and Q0 through Q11 outputs in a 16-pin SOIC. These characteristics make it suitable for divide-by-2 through divide-by-4096 timing and sequencing circuits.
How do I use the CD4040BM as a frequency divider?
Connect the input clock to the appropriate clock terminal, assert master reset to establish zero, and select Q0 through Q11 as the divided output. Each successive stage represents a power-of-two division, so Q0 divides by 2 and Q11 divides by 4096. The maximum operating frequency is 24 MHz, but stage delay must be considered when a high-order output drives timing-critical circuitry.
Does the CD4040BM count on the rising or falling clock edge?
The CD4040BM counts on the negative clock edge, meaning the counter advances when the active clock changes from high to low. This behavior should be considered when defining reset timing and the relationship between input and divided clocks. The manufacturer describes the device as a 12-stage ripple-carry binary counter with negative-edge counting.
What is the difference between CD4040BM and CD4040BM96?
CD4040BM and CD4040BM96 identify the same Texas Instruments 12-bit CMOS counter in a 16-pin SOIC, with the manufacturer order suffix associated with the selected shipping format. The functional counter characteristics remain the same. For a board-level drop-in decision, use the complete manufacturer ordering code and compare its package and packing details before substitution.
Can SN74LV4040AD replace CD4040BM?
SN74LV4040AD is a cross-brand drop-in candidate for CD4040BM because it provides the same 12-stage ripple-carry counter function, corresponding terminal arrangement, and compatible 16-pin surface-mount package. The device uses the SN74LV low-voltage CMOS logic family rather than the original CD4040B voltage range, so supply voltage, input thresholds, output behavior, and timing margins must be checked before production use.
What is the best drop-in replacement for CD4040BM?
SN74LV4040AD is the best explicitly identified drop-in candidate in the available cross-reference information because its terminals and package are consistent with CD4040BM. It is not an electrical clone at every voltage: the CD4040BM supports 3 V to 18 V, while the LV family has a different supply range. Confirm signal levels, timing, and operating conditions before approving the substitution.
When should I choose CD4040BM over SN74LV4040AD?
Choose CD4040BM when the design operates across the broader 3 V to 18 V CD4040B supply range or already depends on established CD4040B timing and logic behavior. Choose SN74LV4040AD when its lower-voltage CMOS characteristics meet the system requirement and the pin-compatible footprint offers a preferred sourcing path. The choice should be based on supply voltage and timing rather than package similarity alone.
Is CD4040BM suitable for industrial timing and sequence-control systems?
CD4040BM is suitable for many industrial timing and sequence-control systems because it combines a 12-bit counter, 12 available division outputs, and a 3 V to 18 V operating range. For a new industrial design, confirm temperature range, EMC requirements, output timing, and applicable qualification before release. For safety-related or automotive duty, use a part explicitly qualified for that environment.
Where can I download the CD4040BM datasheet PDF?
Download the CD4040BM family datasheet from the Texas Instruments product page at https://www.ti.com/product/CD4040B or use the manufacturer PDF link on this page. The document contains the authoritative pin description, operating limits, electrical characteristics, timing information, and package drawings needed to validate a CD4040BM design.
Where can I find the CD4040BM pinout?
The CD4040BM pinout appears in the manufacturer datasheet under the pin-description information for the 16-pin SOIC package. The device includes the CLK and CLK IN terminals, CLR, Q0 through Q11, VSS, VDD, and MR assignments. Use that table when assigning PCB nets and checking the physical orientation of pin 1.
What should I check when laying out a CD4040BM circuit?
Keep the clock, reset, and supply routing compact while separating Q0 through Q11 output traces from sensitive clock nets. Connect the supply and ground pins to low-impedance planes, use a local bypass capacitor, and avoid long branches on the reset path. Because ripple-carry outputs can change at different times, check downstream setup and hold requirements at the selected supply voltage.
Where can I buy CD4040BM online?
Use the Request a Quote form on this page to request CD4040BM availability, order quantities, and current sourcing terms. Quote requests let the buyer confirm the exact manufacturer suffix, 16-pin SOIC packing format, delivery schedule, and any lot or date-code requirements before placing an order.
What is the price of CD4040BM?
CD4040BM pricing depends on order quantity, exact suffix, packing format, and current component supply. Submit a Request a Quote through the form on this page for a current quotation. Include the required quantity, target delivery location, acceptable date codes, and whether reels, tubes, or another approved packing format are needed.
What is the lead time and stock status for CD4040BM?
Current stock and lead time for CD4040BM should be confirmed through the Request a Quote form on this page. Include your required quantity and intended delivery date so the order can be matched against current inventory and production allocation. Also state the precise suffix and packing format needed for your assembly process.

工程参考数据: CD4040BM ——对比、设计指导和合规信息。

选型指南

Choose CD4040BM when the design needs a 12-bit ripple-carry counter with 12 division outputs, negative-edge counting, operation from 3 V to 18 V, and a 16-pin SOIC footprint. Choose SN74LV4040AD when its low-voltage CMOS characteristics meet the system requirements and the same terminal arrangement and package provide a viable sourcing path. CD4040BM is preferable when the circuit operates above the SN74LV family’s supported voltage range or when maintaining the established CD4040B interface reduces qualification effort. For either device, verify propagation delay, output timing, input thresholds, temperature limits, and reset behavior at the actual operating voltage. SN74LV4040AD should not be approved solely from its matching footprint because logic-family thresholds and supply requirements remain functionally important.

与替代料对比

参数 本产品 SN74LV4040AD
Brand Texas Instruments Texas Instruments
Package SOIC-16 SOIC-16
Counter Function 12-stage ripple-carry binary counter and divider 12-stage ripple-carry binary counter and divider
Counting Width 12 bit 12 bit
Counting Edge Negative edge Negative edge
Logic Family CD4000 CMOS SN74LV low-voltage CMOS

关键差异点

  • Broader CD4000-family supply-voltage range (对比 SN74LV4040AD)
  • Twelve individually available division stages (对比 SN74LV4040AD)
  • 24 MHz maximum operating frequency (对比 SN74LV4040AD)

设计说明

Treat the CD4040BM as a ripple-carry counter rather than a synchronous counter. Each output stage changes after the preceding stage, so Q11 can transition substantially later than Q0. Route clock and reset signals away from the Q0 through Q11 outputs, terminate unused inputs according to the manufacturer truth table, and verify downstream setup and hold timing using the worst-case propagation delay at the selected supply voltage.

Place the device close to its clock source and place a local bypass capacitor between VDD and VSS at the package. Keep the clock path short and free of test pads or long branches that can add capacitance and ringing. The reset net should also be short and driven with a clean logic signal because a slow or noisy reset transition can cause inconsistent clearing in a sequential timing circuit.

Do not assume every output changes at the same instant. The 12-bit ripple structure produces staggered transitions, which can create transient decode errors if multiple outputs feed combinational decoding logic. Use qualified latch or flip-flop stages where decoded states must be atomic, and confirm that the clock waveform meets the required edge shape. Also verify the alternative device's supply range and logic thresholds before replacing CD4040BM.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No explicit environmental or automotive compliance statements were identified. Confirm current compliance and qualification status with the manufacturer before production release.

数据核验日期: 2026-11-10 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

CD4040BM datasheet CD4040BM pinout CD4040BM datasheet pdf CD4040BM SOIC-16 footprint CD4040BM 12-bit counter CD4040BM 24MHz operation CD4040BM frequency divider CD4040BM equivalent CD4040BM replacement CD4040BM vs SN74LV4040AD CD4040BM price CD4040BM stock Texas Instruments CD4040BM

相关元器件 & 术语

Texas Instruments CD4040BM CD4040BM96 SN74LV4040AD CD4040B CMOS binary counter ripple-carry counter counter and divider logic IC digital semiconductor frequency divider negative-edge triggering asynchronous reset master reset Q0 through Q11 3 V to 18 V 24 MHz SOIC-16 surface mount industrial timing sequence control test and measurement RoHS REACH AEC-Q100
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情