onsemi

CD4050BCM - 6-Channel 3-18V CMOS Buffer | onsemi

料号: CD4050BCM ✓ 量产中
3 V to 18 V Vdss 16-pin SOIC Package
最小起订量: 1 |

CD4050BCM 概述

The onsemi CD4050BCM is a six-channel, non-inverting CMOS buffer operating from 3 V to 18 V, packaged in a 16-pin SOIC. It provides six independent 1-bit buffers with push-pull outputs, preserving the logic level at each input while providing a buffered drive path. Its monolithic complementary-MOS construction uses N-channel and P-channel enhancement-mode transistors, and its single-supply operation supports logic-level conversion without separate input and output supply rails.

A CMOS logic buffer is a digital semiconductor that reproduces the logical state of its input at its output while adding drive strength and isolation. The CD4050 series belongs to the CD4000 CMOS logic family, whose low-power operation and high noise immunity make it suitable for industrial control, interface conditioning, and systems that combine low-voltage control signals with moderate-load logic. Unlike an open-collector buffer, this device uses a push-pull output configuration for faster transitions and more predictable behavior at low output impedance.

The principal device characteristics are a 3 V to 18 V supply range, six non-inverting channels, one logic bit per element, push-pull outputs, and a 16-pin SOIC package. According to the manufacturer information, the CD4050 family is designed for logic-level conversion using a single VDD supply. This makes it useful when a signal source and the receiving logic operate from the same supply rail but still benefit from a separate buffered output stage.

The three-state CD4053B appears in a comparison listing as a superficially similar alternative, but its three-state outputs and additional control function make it functionally different from the always-enabled CD4050BCM. A CD4000-series cross-reference is more useful for identifying functional equivalents than for guaranteeing package compatibility. Engineers should still verify the exact suffix, package drawing, supply limits, input levels, propagation delay, output-current capability, and temperature grade before approving a substitute.

Typical applications include buffering control signals in industrial automation equipment, conditioning sensor and interface signals, supporting multiple logic rails in embedded systems, and driving compatible CMOS inputs in test and measurement equipment. Because the CD4050BCM provides independent buffers, designers can use each channel separately rather than combining inputs electrically.

The principal PCB consideration is to place the device close to the protected logic inputs and route each output to the intended load with minimal trace length. Decoupling requirements, unused-channel handling, input rise and fall times, and output drive limits should be taken from the manufacturer datasheet. This page combines device identification, sourcing guidance, verified alternatives, comparison criteria, and practical design considerations to support an engineering replacement decision.

直接替换替代料: CD4050BCM ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

MC14050BDR2G

✅ 直接替换
📦 16-SOIC
Same 16-pin SOIC CD4000-family hex-buffer format; verify output polarity and timing because the listed description does not establish identical electrical ratings

📋 参考替代料(不在目录中)

HEF4050BP

✅ 直接替换
📦 16-SOIC
Same CD4050-series hex-buffer function in a 16-pin SOIC; supply, timing, and output-current differences require verification

📋 参考替代料(不在目录中)

CD4050BCM 最大额定值与电气特性

Product Type Hex non-inverting CMOS buffer
Number of Channels 6 channels
Bits per Element 1 bit per element
Supply Voltage Range 3 V to 18 V
Logic Family CD4000 CMOS series
Output Polarity Non-inverting
输出类型 Push-pull
Technology Complementary MOS using N-channel and P-channel enhancement-mode transistors
Level-Shift Capability Logic-level conversion using one VDD supply
封装 16-pin SOIC
安装类型 Surface mount
Lead Count 16 leads
Output-State Control No dedicated output-enable function

CD4050BCM 引脚配置

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
引脚 1 A IN — Non-inverting buffer A input
引脚 2 A OUT — Non-inverting buffer A output
引脚 3 B IN — Non-inverting buffer B input
引脚 4 B OUT — Non-inverting buffer B output
引脚 5 C IN — Non-inverting buffer C input
引脚 6 C OUT — Non-inverting buffer C output
引脚 7 NC — Not connected
引脚 8 VSS — Ground reference
引脚 9 D IN — Non-inverting buffer D input
引脚 10 D OUT — Non-inverting buffer D output
引脚 11 NC — Not connected
引脚 12 E IN — Non-inverting buffer E input
引脚 13 E OUT — Non-inverting buffer E output
引脚 14 F IN — Non-inverting buffer F input
引脚 15 F OUT — Non-inverting buffer F output
引脚 16 VDD — Positive supply voltage

典型应用

CD4050BCM 适用于 6 应用s: Industrial Control Signal Conditioning, CMOS Logic Rail Isolation, Sensor and Interface Conditioning, Test and Measurement Control Logic, Embedded System Power-Control Signals, Network Interface Control.

🏭

Industrial Control Signal Conditioning

The CD4050BCM fits industrial control designs that require several control signals to be buffered before entering a CMOS logic stage. Its six independent, non-inverting channels preserve the original Boolean relationship, while the push-pull outputs provide a defined low-impedance drive path. The 3 V to 18 V operating range supports logic systems operating within that range, and the 16-pin SOIC supports compact surface-mount layouts. Each input should drive only one channel, and the design must respect the manufacturer limits for output current, input rise and fall times, supply decoupling, and unused inputs. For factory equipment, confirm the exact temperature grade and qualification requirements before approving the part for a deployed control board.

🔧

CMOS Logic Rail Isolation

The CD4050BCM can buffer multiple digital-control lines on a mixed-signal or embedded controller board. Because all six channels are non-inverting, each output follows the corresponding input and avoids the software or schematic reversal associated with an inverting buffer. Its single-supply architecture supports the logic-level conversion role identified by the manufacturer, provided the input and output levels remain compatible with the selected VDD. The part is particularly useful where a controller or sensor output needs local buffering before reaching another logic block. Designers should route each buffered output away from high-impedance test points, avoid excessive capacitive loading, and confirm propagation-delay requirements against the maximum clock or control-edge rate.

🧩

Sensor and Interface Conditioning

The CD4050BCM is useful for conditioning discrete outputs from sensors, switches, and interface circuits before they reach a CMOS logic input. Six channels allow several low-current signals to be handled independently without combining them at a common node. The non-inverting configuration preserves sensor-output polarity, and the push-pull buffer stage provides a stronger, more deterministic transition than a passive connection to a high-impedance load. The design must still confirm that the upstream signal amplitude meets the CD4050BCM input thresholds at the selected supply voltage. Use short traces, maintain a common ground reference, and avoid using the buffer as a high-current line driver when its specified output-current capability is insufficient.

🔧

Test and Measurement Control Logic

The CD4050BCM can provide repeated, non-inverting control outputs in test and measurement equipment where several digital settings must reach instrument logic reliably. Its six channels allow separate control and status lines to be buffered while retaining their intended polarity. The 16-pin SOIC is practical for compact instrument-control boards, and the 3 V to 18 V range permits operation across several conventional logic supplies. The primary qualification checks are output rise and fall time, propagation delay, capacitive-load behavior, and current available from each channel. Keep output traces short and use controlled impedance or buffering when driving long cables, since a logic buffer is not a substitute for a dedicated line driver.

⚡

Embedded System Power-Control Signals

The CD4050BCM fits embedded systems that require buffered enable, reset, mode, or peripheral-control signals at a common logic voltage. Its non-inverting channels preserve the firmware-visible relationship between a control output and the downstream circuit, while the push-pull outputs reduce sensitivity to leakage in downstream CMOS inputs. A 3 V to 18 V supply range offers flexibility across embedded logic families, but every connected load must remain within the device's input and output ratings. In power-control systems, ensure that active-high and active-low controls are handled consistently; the buffer cannot invert a signal. Also avoid placing the device in a shutdown path unless its output state during power loss has been confirmed from the manufacturer documentation.

🌐

Network Interface Control

The CD4050BCM can condition local digital control signals in network-interface and communication equipment, including status indicators, hardware enables, and command lines entering legacy CMOS logic. Six buffered channels can reduce loading from control nets and maintain non-inverting command polarity. The 16-pin SOIC is convenient for dense interface boards, while operation from 3 V to 18 V supports integration with conventional CMOS interface logic. Ensure that any externally exposed or long-trace signals have suitable protection and that the device's output drive is adequate for the connected load. For high-speed data paths, use a dedicated transceiver or line driver instead, because the CD4050BCM is a general-purpose logic buffer rather than a specified high-speed communications device.

What is the CD4050BCM?
The CD4050BCM is a six-channel, non-inverting CMOS buffer with push-pull outputs, supplied in a 16-pin SOIC package. According to the Fairchild Semiconductor device description, it is a monolithic complementary-MOS integrated circuit constructed with N-channel and P-channel enhancement-mode transistors. The device provides six independent 1-bit buffers and supports logic-level conversion using one VDD supply.
What is the supply voltage range of the CD4050BCM?
The CD4050BCM operates from 3 V to 18 V. Texas Instruments lists the CD4050B family as a six-channel buffer with a 3 V to 18 V supply range. Because the manufacturer documentation shown uses a single VDD architecture, the CD4050BCM is appropriate for systems that require a buffered CMOS logic path without separate input and output supply rails.
Is the CD4050BCM a non-inverting buffer?
Yes, the CD4050BCM is a non-inverting six-channel buffer. Each output follows the logical state of its corresponding input, while the push-pull output stage provides a low-impedance drive path. The CD4050B should not be confused with inverting CD4000-family buffers; inversion changes the Boolean relationship and would require a different PCB or logic-design review.
Where can I download the CD4050BCM datasheet PDF?
The CD4050BCM datasheet PDF can be accessed through the manufacturer-linked document listings, including the onsemi datasheet page and the Fairchild CD4050BCM datasheet listing. Use the pin-description table, electrical characteristics, and recommended operating conditions from the selected document before finalizing a replacement. The document link on this page provides a direct starting point for the official CD4050B product information.
Where is the CD4050BCM pinout?
The CD4050BCM uses a 16-pin SOIC pinout with six input pins, six output pins, VDD at pin 16, and VSS at pin 8. The standard counter-clockwise arrangement is inputs on pins 1, 3, 5, 9, 12, and 14, with their corresponding outputs on pins 2, 4, 6, 10, 13, and 15. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks.
What can replace the CD4050BCM?
The closest documented drop-in candidate is the onsemi MC14050BDR2G, a 16-pin CD4000-family hex buffer associated with the CD4050 function. Its suitability depends on confirming identical logic polarity, supply range, timing, output drive, and package drawing. HEF4050BP is another CD4050-series candidate, but its exact package suffix must be checked before it can be treated as a footprint-compatible replacement.
What is the best drop-in replacement for CD4050BCM?
The onsemi MC14050BDR2G is the strongest candidate identified in the cross-reference material because it is a CD4000-series hex buffer offered in a 16-lead SOIC. Confirm that the selected manufacturer version has non-inverting rather than inverting outputs, the same 3 V to 18 V operating range, compatible input thresholds, and acceptable propagation delay. Only the exact 16-pin suffix can be approved as a true drop-in replacement.
Is the MC14050BDR2G the same as the CD4050BCM?
The MC14050BDR2G and CD4050BCM are closely related CD4000-family hex-buffer devices, but they are not identical orderable parts. The MC14050BDR2G is listed in comparison material as a complementary-MOS hex buffer, while the CD4050BCM is specified as a non-inverting, six-element push-pull buffer in 16-SOIC. Verify logic polarity, timing, supply range, temperature grade, and package dimensions before substitution.
CD4050BCM vs MC14050BDR2G: which is better for a 16-SOIC design?
The MC14050BDR2G is the more directly documented replacement candidate because the comparison result identifies it as a CD4000-family hex buffer, while the CD4050BCM is explicitly available as a 16-SOIC non-inverting device. The decisive factors are matching output polarity, operating voltage, propagation delay, output current, and pin geometry. Do not substitute based on the hex-buffer description alone; verify the manufacturer ordering table and electrical characteristics.
Is the HEF4050BP a suitable replacement for CD4050BCM?
The HEF4050BP is a CD4050-series functional candidate, but its suitability as a CD4050BCM replacement depends on the exact package ordering code and electrical ratings. The comparison material associates it with the same general hex-buffer category. Verify the SOIC-16 suffix, non-inverting behavior, 3 V to 18 V compatibility, output-drive capability, and timing before using it on an existing board.
When should I choose the CD4050BCM over another CD4000-series buffer?
Choose the CD4050BCM when a design requires six independent, always-enabled, non-inverting CMOS buffers in a 16-pin SOIC and operates within the 3 V to 18 V supply range. Its push-pull outputs are appropriate where a buffered, low-impedance logic path is needed. If an application requires three-state outputs, selectable direction, open-collector behavior, or a different logic function, select a dedicated device rather than treating every CD4000-series hex IC as interchangeable.
Is the CD4050BCM suitable for industrial control and automation?
The CD4050BCM can fit industrial control and automation signal-conditioning tasks when its operating voltage, timing, noise immunity, and output-current limits satisfy the circuit requirements. Its six independent non-inverting channels can isolate logic inputs while preserving Boolean polarity. For industrial deployment, also confirm the exact temperature grade, qualification status, and environmental requirements rather than relying on the generic logic-family description.
Where to buy CD4050BCM online?
Use the Request a Quote form on this page to request CD4050BCM availability, order quantity, and current lead time. The form is the appropriate channel for obtaining a firm quotation and confirming the exact 16-pin SOIC suffix. Engineers should request the manufacturer part number CD4050BCM and verify the reel orientation, moisture level, and date codes before issuing a production order.
What is the price of CD4050BCM?
Current pricing for CD4050BCM is not published as a firm quantity-break schedule in the manufacturer information available for this part. Use the Request a Quote form on this page to obtain a current unit quotation based on quantity and packaging. The quoted part must be confirmed as CD4050BCM in the 16-pin SOIC package so that equivalent package or temperature variants are not substituted unintentionally.
What is the lead time for CD4050BCM?
A fixed production lead time cannot be confirmed from the device information available here. Submit a Request a Quote on this page with the required quantity, standard packaging, and target delivery date. The supplier response should confirm current inventory status, manufacturing lead time, and whether any allocation or lifecycle notice affects the exact CD4050BCM ordering code.
Is CD4050BCM in stock?
Current CD4050BCM inventory cannot be confirmed from the manufacturer and distributor summaries available for this part. Use the Request a Quote form on this page to check current stock and obtain an orderable quotation. Include your target date-code preference and acceptable reel or tray packaging so the response reflects the configuration you can actually use.
How does CD4050BCM differ from CD4053BM?
The CD4050BCM is a six-channel non-inverting buffer with push-pull outputs and no dedicated output-enable control. The CD4053BM is a triple tri-state buffer with three selectable elements and output-enable functionality. Although both appear in comparison listings, the control architecture and channel organization differ, so CD4053BM is not a drop-in substitute unless the PCB and system design are intentionally redesigned.

工程参考数据: CD4050BCM ——对比、设计指导和合规信息。

选型指南

Choose the CD4050BCM when the design needs six independent, non-inverting, push-pull logic buffers in a 16-pin SOIC and the supply voltage falls between 3 V and 18 V. It is appropriate for control-signal isolation, local CMOS logic conditioning, and embedded-system enables or mode signals. Consider MC14050BDR2G when seeking an onsemi CD4000-family alternative in the same package, but confirm output polarity, timing, and ratings because the available comparison description does not prove identical operation. Consider HEF4050BP as a cross-brand CD4050-series candidate, again verifying the exact suffix and electrical characteristics before release. Do not choose a CD4053BM for a drop-in role because its selectable three-state architecture differs from the CD4050BCM. The decisive checks are logic polarity, pinout, supply range, propagation delay, output drive, temperature grade, and package dimensions.

与替代料对比

参数 本产品 MC14050BDR2G HEF4050BP
Package 16-SOIC 16-SOIC 16-SOIC
Brand onsemi onsemi NXP Semiconductors
Function Hex non-inverting buffer Hex CMOS buffer Hex CD4050-series buffer
Number of Channels 6 channels 6 channels 6 channels

关键差异点

  • Explicit six-channel non-inverting configuration (对比 MC14050BDR2G)
  • Single-supply logic-level conversion (对比 HEF4050BP)
  • Compact 16-pin SOIC implementation (对比 MC14050BDR2G)

设计说明

Do not approve a replacement from the family name alone. The CD4050BCM must preserve non-inverting logic polarity, use the same 16-pin SOIC footprint, and satisfy the circuit's 3 V to 18 V supply conditions. MC14050BDR2G and HEF4050BP are plausible CD4000-series candidates, but their exact ordering-code data must be checked for output polarity, propagation delay, output current, and temperature grade before installation.

Place the CD4050BCM close to the logic inputs that require buffering and route each output directly to its destination. Keep the ground return short and use a common ground reference between the buffer and receiving circuit. Avoid long parallel output traces where simultaneous switching could increase coupling. The device provides six independent buffers, so do not combine unrelated input signals onto one node merely to reduce pin usage.

Supply the device only within its documented 3 V to 18 V range and follow the manufacturer recommendations for bypass capacitance and input rise and fall times. A push-pull output can source and sink current, but each channel still has a finite drive limit. Check the worst-case load current and total supply demand rather than assuming every channel can operate simultaneously at its individual maximum rating.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The manufacturer-specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations for CD4050BCM were not identified in the available product information.

相关搜索

CD4050BCM datasheet CD4050BCM pinout CD4050BCM datasheet pdf CD4050BCM equivalent CD4050BCM replacement CD4050BCM cross reference CD4050BCM vs MC14050BDR2G CD4050BCM footprint CD4050BCM price CD4050BCM stock onsemi CD4050BCM CD4050BCM 3V 18V buffer CD4050BCM 16-SOIC CD4050BCM logic level conversion

相关元器件 & 术语

onsemi Fairchild Semiconductor CD4050BCM CD4050B MC14050BDR2G HEF4050BP CMOS logic CD4000 series hex non-inverting buffer logic buffer digital logic IC semiconductor complementary MOS N-channel enhancement-mode transistor P-channel enhancement-mode transistor push-pull output logic-level conversion VDD VSS 16-SOIC SOIC family surface-mount package industrial control embedded system JEDEC MS-001
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情