Infineon

CY8C3665PVI-007 - 67MHz 32KB Flash PSoC | Infineon

料号: CY8C3665PVI-007 ✓ 量产中
0.5 V to 5.5 V Vdss 48-SSOP Package 67 MHz Speed 32 KB Memory
最小起订量: 1 |

CY8C3665PVI-007 概述

The Infineon CY8C3665PVI-007 is an 8-bit PSoC 3 programmable system-on-chip with a 67 MHz 8051 MCU core, 32 KB of flash memory, and a 48-SSOP package. Its operating voltage range is 0.5 V to 5.5 V, making it suitable for embedded control, sensing, and general-purpose industrial applications operating from low-voltage rails.

A PSoC, or programmable system-on-chip, combines a microcontroller core with programmable analog and digital peripheral resources on one integrated circuit. This integration places control logic, conversion functions, and programmable I/O in a single package. It can reduce the number of external components in compact designs while allowing software to configure supported peripheral functions for different end products.

The CY8C3665PVI-007 provides 32 KB of flash, 4 KB of SRAM, 1 KB of data EEPROM, and 8 KB of ECC flash according to the Keil device description. Its interrupt system supports 27 sources and eight priority levels. A Peripheral Hub Unit with eight parallel access paths supports efficient internal data movement, while dual datapointers support fast data-transfer operations.

The device is based on an 8051-compatible core operating up to 67 MHz. This clock rate is useful for event-driven embedded control, mixed-signal monitoring, communication-interface handling, and product configurations that require more processing headroom than a conventional entry-level 8-bit microcontroller. The manufacturer identifies the device as a PSoC 3 device with a 12-bit ADC in the related CY8C3665 family documentation.

Typical uses include industrial sensor controllers, compact monitoring equipment, consumer interfaces, embedded control panels, and products combining digital control with analog measurement. The 0.5 V to 5.5 V operating range supports low-voltage embedded systems, while the 48-SSOP package facilitates conventional surface-mount assembly and board-space control in cost-sensitive designs.

PCB implementation should preserve the pin assignments and decoupling requirements shown in the manufacturer datasheet. Confirm the supported clock, reset, programming, and power configurations for the selected firmware, and verify that the PCB footprint matches the 48-SSOP outline before committing a new layout. This page organizes the verified device information, replacement options, comparisons, and application guidance for engineering review.

直接替换替代料: CY8C3665PVI-007 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: CY8C3665PVI-007 (相同外形与封装尺寸) ——差异在于 Product Type, Package, ADC Resolution, Flash Memory.

Infineon
Product Type: 8-bit PSoC 3 programmable system-on-chip
Package: 48-pin SSOP
ADC Resolution: 12 bits
对比 CY8C3665PVI-007 →
Infineon
Product Type: Programmable System-on-Chip (PSoC 3)
Package: 48-BSSOP (0.295 inch, 7.50mm width)
ADC Resolution: 12-bit ADC in the related CY8C3665PVI-008 device
对比 CY8C3665PVI-007 →
Infineon
Product Type: 8-bit programmable system-on-chip microcontroller
Package: 48-pin SSOP
Flash Memory: 32 KB
对比 CY8C3665PVI-007 →

CY8C3665PVI-008

✅ 直接替换
Infineon
📦 48-SSOP
8-bit PSoC 3 programmable system-on-chip · 8051, single core · 67 MHz · Flash · 32 KB (32K x 8 bits) · 4 KB · 1 KB · 8 KB

联系询价

查看数据手册 →

CY8C3665PVI-049

✅ 直接替换 ⚠️ 规格未核验
Infineon
📦 48-SSOP
Programmable System-on-Chip (PSoC 3) · 8-bit 8051 · 67 MHz · 32KB flash (32K × 8 bits) · 3.3 V · 12-bit ADC in the related CY8C3665PVI-008 device · 48-BSSOP (0.295 inch, 7.50mm width) · 48 pins

联系询价

查看数据手册 →

CY8C3665PVI-080

✅ 直接替换 ⚠️ 规格未核验
Infineon
📦 48-SSOP
8-bit programmable system-on-chip microcontroller · 67 MHz · 32 KB · 32K x 8 bits · 8051-compatible 8-bit core · 0.5 V to 5.5 V · 2.5 V, 3.3 V, and 5 V · 48-pin SSOP

联系询价

查看数据手册 →

CY8C3665PVI-060

✅ 直接替换 ⚠️ 规格未核验
📦 48-SSOP
Same 8051-based PVI family footprint; the maximum frequency, temperature range, and qualification grade differ by suffix from the target and must be checked.

📋 参考替代料(不在目录中)

CY8C3665PVI-006

✅ 直接替换 ⚠️ 规格未核验
📦 48-SSOP
Same PVI package family and CY8C3665 architecture; the suffix-specific frequency grade differs from the target 67 MHz rating and requires confirmation.

📋 参考替代料(不在目录中)

CY8C3665PVI-007 最大额定值与电气特性

Product Type PSoC 3 programmable system-on-chip
MCU Core 8-bit 8051
Maximum CPU Frequency 67 MHz
Operating Voltage Range 0.5 V to 5.5 V
Program Flash Memory 32 KB
SRAM 4 KB
Data EEPROM 1 KB
ECC Flash 8 KB
Flash Protection Levels 4 levels
ADC Resolution 12 bit
Interrupt Sources 27 sources
Interrupt Priority Levels 8 levels
Peripheral Hub Unit 1 unit with 8 parallel access paths
Data Pointers 2
封装 48-SSOP
安装类型 Surface mount

CY8C3665PVI-007 48-ssop 引脚配置指南

CY8C3665PVI-007(48-ssop 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

CY8C3665PVI-007 的 48-ssop 封装引脚图

暂无详细引脚数据: CY8C3665PVI-007.

请参阅 数据手册 以查看完整引脚配置。

典型应用

CY8C3665PVI-007 适用于 6 应用s: Industrial Sensor Controller, Compact Data Acquisition Module, Embedded Control Panel, Low-Power Monitoring Product, Consumer Interface Controller, Communication Interface Module.

🏭

Industrial Sensor Controller

The CY8C3665PVI-007 fits an industrial sensor controller because its 67 MHz 8051 core provides useful processing headroom for acquisition, filtering, state management, and communications. The integrated 12-bit ADC supports analog measurement, while 32 KB flash and 4 KB SRAM accommodate application code and working data in a 48-SSOP package. The 0.5 V to 5.5 V range can support low-voltage sensor systems. Confirm the selected temperature grade, analog settling requirements, and external reference strategy before releasing an industrial design.

🧩

Compact Data Acquisition Module

The CY8C3665PVI-007 can serve as the control center of a compact data-acquisition module because it combines a 67 MHz 8051 core, a 12-bit ADC, 32 KB program flash, and 4 KB SRAM. Firmware can sample analog inputs, apply calibration and filtering, and format results for a host interface. The 48-SSOP package keeps the footprint manageable, while the 0.5 V to 5.5 V supply range supports compact mixed-signal systems. Use the datasheet’s ADC and clock guidance to establish channel multiplexing, acquisition timing, and conversion latency.

📺

Embedded Control Panel

For an embedded control panel, the CY8C3665PVI-007 provides enough CPU performance for button handling, display updates, status logic, and communication tasks while maintaining a compact 48-SSOP footprint. Its 8051 compatibility supports established embedded toolchains, and the 27-source interrupt system can organize time-sensitive events across eight priority levels. The 32 KB flash capacity is suitable for moderate application firmware. Validate display-interface timing, debounce strategy, and interrupt latency against the target product’s response-time requirements.

📱

Low-Power Monitoring Product

The CY8C3665PVI-007 is appropriate for a low-power monitoring product that must combine sensing, local control, and data handling in one device. Its 0.5 V minimum operating voltage supports low-voltage architecture evaluation, while 32 KB flash provides room for firmware that manages measurements, thresholds, and event history. The 12-bit ADC can handle analog monitoring functions where greater precision is not required. Power consumption remains application-specific, so assess sleep modes, clock settings, peripheral activity, and external regulator losses on the final board.

🔧

Consumer Interface Controller

The CY8C3665PVI-007 can implement a consumer interface controller that coordinates buttons, indicators, analog controls, and a communications link. The 67 MHz 8051 core gives firmware capacity for protocol handling and user-interface logic, while dual datapointers assist efficient data movement. Its 48-SSOP package is suitable for cost-sensitive surface-mount products, and the 0.5 V to 5.5 V range offers flexibility in low-voltage system architectures. ESD protection, output-driver loading, standby behavior, and production programming must be evaluated at the product level.

🌐

Communication Interface Module

The CY8C3665PVI-007 can be used in a communication interface module where an embedded controller must frame data, respond to commands, and manage local control functions. The 8051 core operates up to 67 MHz, and the Peripheral Hub Unit provides eight parallel access paths for internal data movement. A 32 KB flash and 4 KB SRAM allocation is practical for protocol stacks and buffering in moderate systems. Select the external transceiver to match the physical layer, then verify baud-rate tolerance, interrupt latency, flow control, and isolation requirements.

What is the CY8C3665PVI-007?
The CY8C3665PVI-007 is an Infineon PSoC 3 programmable system-on-chip built around an 8-bit 8051 MCU core. It operates up to 67 MHz, includes 32 KB of flash, and is offered in a 48-SSOP package. The Keil device description identifies 4 KB of SRAM, 1 KB of data EEPROM, 8 KB of ECC flash, 27 interrupt sources, and eight priority levels as principal resources for embedded product development.
What are the key specifications of CY8C3665PVI-007?
The principal CY8C3665PVI-007 specifications are a 67 MHz 8051 core, 32 KB program flash, 4 KB SRAM, 1 KB data EEPROM, 8 KB ECC flash, and a 0.5 V to 5.5 V operating range. The device also provides a 12-bit ADC, two datapointers, 27 interrupt sources, and eight interrupt-priority levels. It is packaged in a 48-SSOP surface-mount package for compact embedded assemblies.
Where can I download the CY8C3665PVI-007 datasheet PDF?
The CY8C3665PVI-007 datasheet PDF is available through the linked Cypress Semiconductor document page, which identifies the device as a PSoC 3 programmable system-on-chip. Use the document's pin-description and ordering tables when assigning PCB functions and confirming package details. The manufacturer device page for CY8C3665PVI-008 also provides product-guide and ordering information for the closely related family member.
Where can I find the CY8C3665PVI-007 pinout?
The CY8C3665PVI-007 pinout is documented in the manufacturer PSoC 3 datasheet under the package-pin and ordering-information tables. The device uses a 48-SSOP package, so verify all 48 terminal assignments against the specific ordering code before layout release. Assign power, ground, programming, reset, clock, and peripheral signals from those tables rather than inferring pin functions from an unrelated SSOP device.
Can CY8C3665PVI-007 replace CY8C3665PVI-008?
CY8C3665PVI-008 is a same-family PSoC 3 device with an 8051 core, 32 KB flash, and a 12-bit ADC, while the CY8C3665PVI-007 is rated up to 67 MHz. Both ordering codes use the PVI package designation, but a firmware and hardware substitution still requires comparison of frequency grade, temperature rating, pin configuration, and peripheral assignments. Confirm those limits against the manufacturer datasheets before production use.
When should I choose CY8C3665PVI-007 over another CY8C3665 variant?
Choose CY8C3665PVI-007 when a design specifically requires the 67 MHz grade of the 8051-based CY8C3665 family. It offers 32 KB flash, 4 KB SRAM, a 12-bit ADC, and a 0.5 V to 5.5 V operating range in a 48-SSOP package. Select another suffix only after checking its clock grade, temperature range, qualification status, and exact pin-level compatibility against the target schematic.
What can replace CY8C3665PVI-007?
The closest documented replacements are same-brand CY8C3665PVI ordering variants because they retain the PSoC 3 architecture, 8051 core, and PVI package family. Candidates include CY8C3665PVI-008, CY8C3665PVI-049, CY8C3665PVI-080, CY8C3665PVI-060, and CY8C3665PVI-006. Treat them as conditional drop-in candidates until clock, temperature, qualification, and pin details are checked against the manufacturer documentation.
Is CY8C3665PVI-007 suitable for an industrial sensor controller?
The CY8C3665PVI-007 is suitable for many industrial sensor-controller designs because it combines a 67 MHz 8051 core, 32 KB flash, 4 KB SRAM, and a 12-bit ADC. Its 0.5 V to 5.5 V range also supports low-voltage acquisition systems. Industrial suitability still depends on the selected temperature grade, operating-voltage limits, peripheral requirements, and system-level EMC and environmental constraints.
Is CY8C3665PVI-007 the same as CY8C3665PVI-008?
The CY8C3665PVI-007 and CY8C3665PVI-008 are closely related PSoC 3 devices, but they are not interchangeable solely because both use the CY8C3665 family and PVI package designation. The target is identified as a 67 MHz part, while the manufacturer describes the -008 device as an 8051-based PSoC 3 with 32 KB flash and a 12-bit ADC. Review ordering tables and firmware timing requirements before substitution.
What is the best cross-brand equivalent for CY8C3665PVI-007?
No verified cross-brand equivalent is established for the CY8C3665PVI-007. PSoC 3 devices combine an 8051 core with proprietary programmable analog and digital resources, so a generic 8-bit microcontroller cannot be assumed to be pin-compatible. Use the Request a Quote form on this page for sourcing support, and require manufacturer pin, timing, peripheral, and memory compatibility before considering a cross-brand redesign.
Where can I buy CY8C3665PVI-007 online?
Use the Request a Quote form on this page to request CY8C3665PVI-007 availability, lead time, and ordering support. The form is the appropriate commercial channel for exact-MPN sourcing without inserting a static price into the technical content. Include your required quantity, packaging preference, target delivery date, and any required qualification documentation with the request.
What is the price of CY8C3665PVI-007?
Current pricing for CY8C3665PVI-007 is handled through the Request a Quote form on this page because distributor prices and stock can change with market conditions and order quantity. Submit the exact MPN and required quantity to obtain a current quotation. For design budgeting, the device should not be evaluated from family-level pricing because suffix-specific package and qualification requirements can affect availability.
What is the lead time for CY8C3665PVI-007?
Request the current CY8C3665PVI-007 lead time through the Request a Quote form on this page. The confirmed schedule should reflect the ordered quantity, package form, shipment destination, and current manufacturer or distribution availability. For production planning, ask for separate lead times for prototype and scheduled-volume quantities rather than assuming that an initial sample allocation guarantees a volume delivery date.
Is CY8C3665PVI-007 in stock?
Current CY8C3665PVI-007 inventory should be confirmed through the Request a Quote form on this page. A listing page alone does not establish a guaranteed stock allocation for the exact suffix and requested quantity. Provide the required quantity, reel or tray preference, and delivery location so the availability response can reflect the complete order configuration.
What tools and software support the CY8C3665PVI-007?
The CY8C3665PVI-007 is supported as an 8051-based PSoC 3 device in embedded-development workflows, including the Keil device catalog entry identified for the part. Development usually requires configuring the PSoC peripheral blocks, programming the selected flash partition, and matching the firmware to the device’s clock and package pins. Use the manufacturer’s device configuration and programming documentation for the definitive toolchain version.
What design checks are important for CY8C3665PVI-007?
Verify the 0.5 V to 5.5 V operating range, 67 MHz clock configuration, reset behavior, programming interface, and every 48-SSOP terminal against the manufacturer datasheet. Decoupling, clock stability, exposed routing requirements, and programming access should be considered together. Because the 67 MHz core is substantially faster than some lower-grade family members, timing-sensitive firmware and peripherals also require verification after any suffix substitution.

工程参考数据: CY8C3665PVI-007 ——对比、设计指导和合规信息。

选型指南

Choose CY8C3665PVI-007 when the design specifically needs the 67 MHz grade of the 8051-based CY8C3665 PSoC family, together with 32 KB flash, 4 KB SRAM, a 12-bit ADC, and a 48-SSOP footprint. CY8C3665PVI-008 is the closest documented alternative because the manufacturer confirms the same core and memory capacity, but its speed grade must be checked. Consider CY8C3665PVI-049, -080, -060, or -006 only after confirming their frequency, temperature, qualification, and terminal details against the original design. No verified cross-brand drop-in option is established because PSoC peripheral resources, programming tools, and analog functions are product-specific. For a new mixed-signal design, compare the integrated ADC and programmable resources with a conventional MCU plus discrete converter; for an existing PSoC design, same-family ordering variants offer the most practical path to a board-level qualification review.

与替代料对比

参数 本产品 CY8C3665PVI-008 CY8C3665PVI-049 CY8C3665PVI-080 CY8C3665PVI-060 CY8C3665PVI-006
Brand Infineon Infineon Infineon Infineon Infineon Infineon
Package 48-SSOP 48-SSOP 48-SSOP 48-SSOP 48-SSOP 48-SSOP
MCU Core 8-bit 8051 8051 8051 8051 8051 8051

关键差异点

  • Highest identified clock grade in the listed PVI alternatives (对比 CY8C3665PVI-008)
  • Integrated analog conversion supports compact sensor designs (对比 CY8C3665PVI-049)
  • Deterministic interrupt organization for embedded control (对比 CY8C3665PVI-080)
  • Separate ECC-flash resources extend reliable local storage (对比 CY8C3665PVI-060)

设计说明

Use the manufacturer’s 48-SSOP land pattern and assign every terminal directly from the CY8C3665PVI-007 pin-description table. Place required decoupling capacitors next to the associated supply pins and keep programming, reset, and clock traces short. Check the footprint’s lead pitch, terminal length, and courtyard against the final package drawing before fabrication; the 48-SSOP package is not interchangeable with leaded SSOP packages.

Design the supply network for the device’s stated 0.5 V to 5.5 V operating range and keep startup, transient, and steady-state voltage within the limits for the selected ordering suffix. Separate sensitive analog-supply requirements from digital switching loads, verify the allowable ripple at the IC pins, and include local bulk capacitance where the supply path is shared by other components. Do not base the power design solely on the family-level voltage range.

Configure the 67 MHz operating mode only after checking clock-source requirements and peripheral timing in the manufacturer documentation. Route the clock away from analog inputs and high-speed switching nodes, use a continuous ground reference, and terminate unused configurable inputs according to the device guidance. When changing to a lower-frequency ordering variant, review interrupt latency, communication timing, PWM behavior, and acquisition timing in the firmware.

A shared package family is not sufficient proof that every CY8C3665 suffix is a production substitute. Before replacing CY8C3665PVI-007, compare the ordering tables for maximum frequency, temperature grade, qualification, flash configuration, and terminal functions. CY8C3665PVI-008 is documented as a 32 KB-flash, 12-bit-ADC PSoC 3 family member, while the target is identified as a 67 MHz device. Preserve the original clock, programming, and brownout settings when validating firmware compatibility.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The exact ordering code must be checked against current manufacturer compliance and qualification documentation.

数据核验日期: 2026-11-19 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

CY8C3665PVI-007 CY8C3665PVI-007 datasheet CY8C3665PVI-007 datasheet pdf CY8C3665PVI-007 pinout CY8C3665PVI-007 equivalent CY8C3665PVI-007 replacement CY8C3665PVI-007 cross reference Infineon CY8C3665PVI-007 CY8C3665 67MHz 32KB Flash CY8C3665 48-SSOP pinout CY8C3665PVI-007 vs CY8C3665PVI-008 CY8C3665PVI-007 price CY8C3665PVI-007 stock CY8C3665PVI-007 sensor controller

相关元器件 & 术语

Infineon Cypress Semiconductor CY8C3665PVI-007 CY8C3665PVI-008 CY8C3665PVI-049 CY8C3665PVI-080 CY8C3665PVI-060 CY8C3665PVI-006 PSoC 3 programmable system-on-chip 8051 MCU 8-bit microcontroller embedded microcontroller semiconductor 48-SSOP SSOP package family surface-mount package program flash SRAM data EEPROM ECC flash 12-bit ADC Peripheral Hub Unit interrupt priority levels
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情