CY8C3665PVI-007 - 67MHz 32KB Flash PSoC | Infineon
MPN: CY8C3665PVI-007 ✓ ActiveCY8C3665PVI-007 Overview
A PSoC, or programmable system-on-chip, combines a microcontroller core with programmable analog and digital peripheral resources on one integrated circuit. This integration places control logic, conversion functions, and programmable I/O in a single package. It can reduce the number of external components in compact designs while allowing software to configure supported peripheral functions for different end products.
The CY8C3665PVI-007 provides 32 KB of flash, 4 KB of SRAM, 1 KB of data EEPROM, and 8 KB of ECC flash according to the Keil device description. Its interrupt system supports 27 sources and eight priority levels. A Peripheral Hub Unit with eight parallel access paths supports efficient internal data movement, while dual datapointers support fast data-transfer operations.
The device is based on an 8051-compatible core operating up to 67 MHz. This clock rate is useful for event-driven embedded control, mixed-signal monitoring, communication-interface handling, and product configurations that require more processing headroom than a conventional entry-level 8-bit microcontroller. The manufacturer identifies the device as a PSoC 3 device with a 12-bit ADC in the related CY8C3665 family documentation.
Typical uses include industrial sensor controllers, compact monitoring equipment, consumer interfaces, embedded control panels, and products combining digital control with analog measurement. The 0.5 V to 5.5 V operating range supports low-voltage embedded systems, while the 48-SSOP package facilitates conventional surface-mount assembly and board-space control in cost-sensitive designs.
PCB implementation should preserve the pin assignments and decoupling requirements shown in the manufacturer datasheet. Confirm the supported clock, reset, programming, and power configurations for the selected firmware, and verify that the PCB footprint matches the 48-SSOP outline before committing a new layout. This page organizes the verified device information, replacement options, comparisons, and application guidance for engineering review.
Drop-in alternatives for CY8C3665PVI-007 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with CY8C3665PVI-007 (same form factor and footprint) — differing in Product Type, Package, ADC Resolution, Flash Memory.
CY8C3665PVI-008
✅ Drop-InContact for price
View Datasheet →CY8C3665PVI-049
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →CY8C3665PVI-080
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →CY8C3665PVI-060
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
CY8C3665PVI-006
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
CY8C3665PVI-007 Maximum Ratings & Electrical Characteristics
| Product Type | PSoC 3 programmable system-on-chip |
| MCU Core | 8-bit 8051 |
| Maximum CPU Frequency | 67 MHz |
| Operating Voltage Range | 0.5 V to 5.5 V |
| Program Flash Memory | 32 KB |
| SRAM | 4 KB |
| Data EEPROM | 1 KB |
| ECC Flash | 8 KB |
| Flash Protection Levels | 4 levels |
| ADC Resolution | 12 bit |
| Interrupt Sources | 27 sources |
| Interrupt Priority Levels | 8 levels |
| Peripheral Hub Unit | 1 unit with 8 parallel access paths |
| Data Pointers | 2 |
| Package | 48-SSOP |
| Mounting Type | Surface mount |
CY8C3665PVI-007 48-ssop Pin Configuration Guide
Pin configuration for CY8C3665PVI-007 (48-ssop package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for CY8C3665PVI-007.
Refer to the datasheet for full pin configuration.
Typical Applications
CY8C3665PVI-007 is suitable for 6 applications: Industrial Sensor Controller, Compact Data Acquisition Module, Embedded Control Panel, Low-Power Monitoring Product, Consumer Interface Controller, Communication Interface Module.
Industrial Sensor Controller
The CY8C3665PVI-007 fits an industrial sensor controller because its 67 MHz 8051 core provides useful processing headroom for acquisition, filtering, state management, and communications. The integrated 12-bit ADC supports analog measurement, while 32 KB flash and 4 KB SRAM accommodate application code and working data in a 48-SSOP package. The 0.5 V to 5.5 V range can support low-voltage sensor systems. Confirm the selected temperature grade, analog settling requirements, and external reference strategy before releasing an industrial design.
Recommended
Compact Data Acquisition Module
The CY8C3665PVI-007 can serve as the control center of a compact data-acquisition module because it combines a 67 MHz 8051 core, a 12-bit ADC, 32 KB program flash, and 4 KB SRAM. Firmware can sample analog inputs, apply calibration and filtering, and format results for a host interface. The 48-SSOP package keeps the footprint manageable, while the 0.5 V to 5.5 V supply range supports compact mixed-signal systems. Use the datasheet’s ADC and clock guidance to establish channel multiplexing, acquisition timing, and conversion latency.
Recommended
Embedded Control Panel
For an embedded control panel, the CY8C3665PVI-007 provides enough CPU performance for button handling, display updates, status logic, and communication tasks while maintaining a compact 48-SSOP footprint. Its 8051 compatibility supports established embedded toolchains, and the 27-source interrupt system can organize time-sensitive events across eight priority levels. The 32 KB flash capacity is suitable for moderate application firmware. Validate display-interface timing, debounce strategy, and interrupt latency against the target product’s response-time requirements.
Recommended
Low-Power Monitoring Product
The CY8C3665PVI-007 is appropriate for a low-power monitoring product that must combine sensing, local control, and data handling in one device. Its 0.5 V minimum operating voltage supports low-voltage architecture evaluation, while 32 KB flash provides room for firmware that manages measurements, thresholds, and event history. The 12-bit ADC can handle analog monitoring functions where greater precision is not required. Power consumption remains application-specific, so assess sleep modes, clock settings, peripheral activity, and external regulator losses on the final board.
Recommended
Consumer Interface Controller
The CY8C3665PVI-007 can implement a consumer interface controller that coordinates buttons, indicators, analog controls, and a communications link. The 67 MHz 8051 core gives firmware capacity for protocol handling and user-interface logic, while dual datapointers assist efficient data movement. Its 48-SSOP package is suitable for cost-sensitive surface-mount products, and the 0.5 V to 5.5 V range offers flexibility in low-voltage system architectures. ESD protection, output-driver loading, standby behavior, and production programming must be evaluated at the product level.
Recommended
Communication Interface Module
The CY8C3665PVI-007 can be used in a communication interface module where an embedded controller must frame data, respond to commands, and manage local control functions. The 8051 core operates up to 67 MHz, and the Peripheral Hub Unit provides eight parallel access paths for internal data movement. A 32 KB flash and 4 KB SRAM allocation is practical for protocol stacks and buffering in moderate systems. Select the external transceiver to match the physical layer, then verify baud-rate tolerance, interrupt latency, flow control, and isolation requirements.
Recommended
Recommended Products Summary
Engineering reference data for CY8C3665PVI-007 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | CY8C3665PVI-008 | CY8C3665PVI-049 | CY8C3665PVI-080 | CY8C3665PVI-060 | CY8C3665PVI-006 |
|---|---|---|---|---|---|---|
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon | Infineon |
| Package | 48-SSOP | 48-SSOP | 48-SSOP | 48-SSOP | 48-SSOP | 48-SSOP |
| MCU Core | 8-bit 8051 | 8051 | 8051 | 8051 | 8051 | 8051 |
Key Differentiators
- Highest identified clock grade in the listed PVI alternatives (vs CY8C3665PVI-008)
- Integrated analog conversion supports compact sensor designs (vs CY8C3665PVI-049)
- Deterministic interrupt organization for embedded control (vs CY8C3665PVI-080)
- Separate ECC-flash resources extend reliable local storage (vs CY8C3665PVI-060)
Design Notes
Use the manufacturer’s 48-SSOP land pattern and assign every terminal directly from the CY8C3665PVI-007 pin-description table. Place required decoupling capacitors next to the associated supply pins and keep programming, reset, and clock traces short. Check the footprint’s lead pitch, terminal length, and courtyard against the final package drawing before fabrication; the 48-SSOP package is not interchangeable with leaded SSOP packages.
Design the supply network for the device’s stated 0.5 V to 5.5 V operating range and keep startup, transient, and steady-state voltage within the limits for the selected ordering suffix. Separate sensitive analog-supply requirements from digital switching loads, verify the allowable ripple at the IC pins, and include local bulk capacitance where the supply path is shared by other components. Do not base the power design solely on the family-level voltage range.
Configure the 67 MHz operating mode only after checking clock-source requirements and peripheral timing in the manufacturer documentation. Route the clock away from analog inputs and high-speed switching nodes, use a continuous ground reference, and terminate unused configurable inputs according to the device guidance. When changing to a lower-frequency ordering variant, review interrupt latency, communication timing, PWM behavior, and acquisition timing in the firmware.
A shared package family is not sufficient proof that every CY8C3665 suffix is a production substitute. Before replacing CY8C3665PVI-007, compare the ordering tables for maximum frequency, temperature grade, qualification, flash configuration, and terminal functions. CY8C3665PVI-008 is documented as a 32 KB-flash, 12-bit-ADC PSoC 3 family member, while the target is identified as a 67 MHz device. Preserve the original clock, programming, and brownout settings when validating firmware compatibility.
Compliance Information
The exact ordering code must be checked against current manufacturer compliance and qualification documentation.