Infineon

CY8C3665PVI-007 - 67MHz 32KB Flash PSoC | Infineon

Teilenummer: CY8C3665PVI-007 ✓ Aktiv
0.5 V to 5.5 V Vdss 48-SSOP Package 67 MHz Speed 32 KB Memory
MOQ: 1 |

CY8C3665PVI-007 Übersicht

The Infineon CY8C3665PVI-007 is an 8-bit PSoC 3 programmable system-on-chip with a 67 MHz 8051 MCU core, 32 KB of flash memory, and a 48-SSOP package. Its operating voltage range is 0.5 V to 5.5 V, making it suitable for embedded control, sensing, and general-purpose industrial applications operating from low-voltage rails.

A PSoC, or programmable system-on-chip, combines a microcontroller core with programmable analog and digital peripheral resources on one integrated circuit. This integration places control logic, conversion functions, and programmable I/O in a single package. It can reduce the number of external components in compact designs while allowing software to configure supported peripheral functions for different end products.

The CY8C3665PVI-007 provides 32 KB of flash, 4 KB of SRAM, 1 KB of data EEPROM, and 8 KB of ECC flash according to the Keil device description. Its interrupt system supports 27 sources and eight priority levels. A Peripheral Hub Unit with eight parallel access paths supports efficient internal data movement, while dual datapointers support fast data-transfer operations.

The device is based on an 8051-compatible core operating up to 67 MHz. This clock rate is useful for event-driven embedded control, mixed-signal monitoring, communication-interface handling, and product configurations that require more processing headroom than a conventional entry-level 8-bit microcontroller. The manufacturer identifies the device as a PSoC 3 device with a 12-bit ADC in the related CY8C3665 family documentation.

Typical uses include industrial sensor controllers, compact monitoring equipment, consumer interfaces, embedded control panels, and products combining digital control with analog measurement. The 0.5 V to 5.5 V operating range supports low-voltage embedded systems, while the 48-SSOP package facilitates conventional surface-mount assembly and board-space control in cost-sensitive designs.

PCB implementation should preserve the pin assignments and decoupling requirements shown in the manufacturer datasheet. Confirm the supported clock, reset, programming, and power configurations for the selected firmware, and verify that the PCB footprint matches the 48-SSOP outline before committing a new layout. This page organizes the verified device information, replacement options, comparisons, and application guidance for engineering review.

Drop-in-Alternativen für CY8C3665PVI-007 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit CY8C3665PVI-007 (gleiche Bauform und Footprint) – abweichend in Product Type, Package, ADC Resolution, Flash Memory.

Infineon
Product Type: 8-bit PSoC 3 programmable system-on-chip
Package: 48-pin SSOP
ADC Resolution: 12 bits
Vergleichen mit CY8C3665PVI-007 →
Infineon
Product Type: Programmable System-on-Chip (PSoC 3)
Package: 48-BSSOP (0.295 inch, 7.50mm width)
ADC Resolution: 12-bit ADC in the related CY8C3665PVI-008 device
Vergleichen mit CY8C3665PVI-007 →
Infineon
Product Type: 8-bit programmable system-on-chip microcontroller
Package: 48-pin SSOP
Flash Memory: 32 KB
Vergleichen mit CY8C3665PVI-007 →

CY8C3665PVI-008

✅ Drop-In
Infineon
📦 48-SSOP
8-bit PSoC 3 programmable system-on-chip · 8051, single core · 67 MHz · Flash · 32 KB (32K x 8 bits) · 4 KB · 1 KB · 8 KB

Preis auf Anfrage

Datenblatt ansehen →

CY8C3665PVI-049

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Infineon
📦 48-SSOP
Programmable System-on-Chip (PSoC 3) · 8-bit 8051 · 67 MHz · 32KB flash (32K × 8 bits) · 3.3 V · 12-bit ADC in the related CY8C3665PVI-008 device · 48-BSSOP (0.295 inch, 7.50mm width) · 48 pins

Preis auf Anfrage

Datenblatt ansehen →

CY8C3665PVI-080

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Infineon
📦 48-SSOP
8-bit programmable system-on-chip microcontroller · 67 MHz · 32 KB · 32K x 8 bits · 8051-compatible 8-bit core · 0.5 V to 5.5 V · 2.5 V, 3.3 V, and 5 V · 48-pin SSOP

Preis auf Anfrage

Datenblatt ansehen →

CY8C3665PVI-060

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 48-SSOP
Same 8051-based PVI family footprint; the maximum frequency, temperature range, and qualification grade differ by suffix from the target and must be checked.

📋 Referenzalternative (nicht im Katalog)

CY8C3665PVI-006

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 48-SSOP
Same PVI package family and CY8C3665 architecture; the suffix-specific frequency grade differs from the target 67 MHz rating and requires confirmation.

📋 Referenzalternative (nicht im Katalog)

CY8C3665PVI-007 Grenzwerte & elektrische Eigenschaften

Product Type PSoC 3 programmable system-on-chip
MCU Core 8-bit 8051
Maximum CPU Frequency 67 MHz
Operating Voltage Range 0.5 V to 5.5 V
Program Flash Memory 32 KB
SRAM 4 KB
Data EEPROM 1 KB
ECC Flash 8 KB
Flash Protection Levels 4 levels
ADC Resolution 12 bit
Interrupt Sources 27 sources
Interrupt Priority Levels 8 levels
Peripheral Hub Unit 1 unit with 8 parallel access paths
Data Pointers 2
Gehäuse 48-SSOP
Montageart Surface mount

CY8C3665PVI-007 48-ssop Pinbelegungsleitfaden

Pinbelegung für CY8C3665PVI-007 (48-ssop-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für CY8C3665PVI-007 im 48-ssop-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für CY8C3665PVI-007.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

CY8C3665PVI-007 ist geeignet für 6 Anwendungs: Industrial Sensor Controller, Compact Data Acquisition Module, Embedded Control Panel, Low-Power Monitoring Product, Consumer Interface Controller, Communication Interface Module.

🏭

Industrial Sensor Controller

The CY8C3665PVI-007 fits an industrial sensor controller because its 67 MHz 8051 core provides useful processing headroom for acquisition, filtering, state management, and communications. The integrated 12-bit ADC supports analog measurement, while 32 KB flash and 4 KB SRAM accommodate application code and working data in a 48-SSOP package. The 0.5 V to 5.5 V range can support low-voltage sensor systems. Confirm the selected temperature grade, analog settling requirements, and external reference strategy before releasing an industrial design.

🧩

Compact Data Acquisition Module

The CY8C3665PVI-007 can serve as the control center of a compact data-acquisition module because it combines a 67 MHz 8051 core, a 12-bit ADC, 32 KB program flash, and 4 KB SRAM. Firmware can sample analog inputs, apply calibration and filtering, and format results for a host interface. The 48-SSOP package keeps the footprint manageable, while the 0.5 V to 5.5 V supply range supports compact mixed-signal systems. Use the datasheet’s ADC and clock guidance to establish channel multiplexing, acquisition timing, and conversion latency.

📺

Embedded Control Panel

For an embedded control panel, the CY8C3665PVI-007 provides enough CPU performance for button handling, display updates, status logic, and communication tasks while maintaining a compact 48-SSOP footprint. Its 8051 compatibility supports established embedded toolchains, and the 27-source interrupt system can organize time-sensitive events across eight priority levels. The 32 KB flash capacity is suitable for moderate application firmware. Validate display-interface timing, debounce strategy, and interrupt latency against the target product’s response-time requirements.

📱

Low-Power Monitoring Product

The CY8C3665PVI-007 is appropriate for a low-power monitoring product that must combine sensing, local control, and data handling in one device. Its 0.5 V minimum operating voltage supports low-voltage architecture evaluation, while 32 KB flash provides room for firmware that manages measurements, thresholds, and event history. The 12-bit ADC can handle analog monitoring functions where greater precision is not required. Power consumption remains application-specific, so assess sleep modes, clock settings, peripheral activity, and external regulator losses on the final board.

🔧

Consumer Interface Controller

The CY8C3665PVI-007 can implement a consumer interface controller that coordinates buttons, indicators, analog controls, and a communications link. The 67 MHz 8051 core gives firmware capacity for protocol handling and user-interface logic, while dual datapointers assist efficient data movement. Its 48-SSOP package is suitable for cost-sensitive surface-mount products, and the 0.5 V to 5.5 V range offers flexibility in low-voltage system architectures. ESD protection, output-driver loading, standby behavior, and production programming must be evaluated at the product level.

🌐

Communication Interface Module

The CY8C3665PVI-007 can be used in a communication interface module where an embedded controller must frame data, respond to commands, and manage local control functions. The 8051 core operates up to 67 MHz, and the Peripheral Hub Unit provides eight parallel access paths for internal data movement. A 32 KB flash and 4 KB SRAM allocation is practical for protocol stacks and buffering in moderate systems. Select the external transceiver to match the physical layer, then verify baud-rate tolerance, interrupt latency, flow control, and isolation requirements.

What is the CY8C3665PVI-007?
The CY8C3665PVI-007 is an Infineon PSoC 3 programmable system-on-chip built around an 8-bit 8051 MCU core. It operates up to 67 MHz, includes 32 KB of flash, and is offered in a 48-SSOP package. The Keil device description identifies 4 KB of SRAM, 1 KB of data EEPROM, 8 KB of ECC flash, 27 interrupt sources, and eight priority levels as principal resources for embedded product development.
What are the key specifications of CY8C3665PVI-007?
The principal CY8C3665PVI-007 specifications are a 67 MHz 8051 core, 32 KB program flash, 4 KB SRAM, 1 KB data EEPROM, 8 KB ECC flash, and a 0.5 V to 5.5 V operating range. The device also provides a 12-bit ADC, two datapointers, 27 interrupt sources, and eight interrupt-priority levels. It is packaged in a 48-SSOP surface-mount package for compact embedded assemblies.
Where can I download the CY8C3665PVI-007 datasheet PDF?
The CY8C3665PVI-007 datasheet PDF is available through the linked Cypress Semiconductor document page, which identifies the device as a PSoC 3 programmable system-on-chip. Use the document's pin-description and ordering tables when assigning PCB functions and confirming package details. The manufacturer device page for CY8C3665PVI-008 also provides product-guide and ordering information for the closely related family member.
Where can I find the CY8C3665PVI-007 pinout?
The CY8C3665PVI-007 pinout is documented in the manufacturer PSoC 3 datasheet under the package-pin and ordering-information tables. The device uses a 48-SSOP package, so verify all 48 terminal assignments against the specific ordering code before layout release. Assign power, ground, programming, reset, clock, and peripheral signals from those tables rather than inferring pin functions from an unrelated SSOP device.
Can CY8C3665PVI-007 replace CY8C3665PVI-008?
CY8C3665PVI-008 is a same-family PSoC 3 device with an 8051 core, 32 KB flash, and a 12-bit ADC, while the CY8C3665PVI-007 is rated up to 67 MHz. Both ordering codes use the PVI package designation, but a firmware and hardware substitution still requires comparison of frequency grade, temperature rating, pin configuration, and peripheral assignments. Confirm those limits against the manufacturer datasheets before production use.
When should I choose CY8C3665PVI-007 over another CY8C3665 variant?
Choose CY8C3665PVI-007 when a design specifically requires the 67 MHz grade of the 8051-based CY8C3665 family. It offers 32 KB flash, 4 KB SRAM, a 12-bit ADC, and a 0.5 V to 5.5 V operating range in a 48-SSOP package. Select another suffix only after checking its clock grade, temperature range, qualification status, and exact pin-level compatibility against the target schematic.
What can replace CY8C3665PVI-007?
The closest documented replacements are same-brand CY8C3665PVI ordering variants because they retain the PSoC 3 architecture, 8051 core, and PVI package family. Candidates include CY8C3665PVI-008, CY8C3665PVI-049, CY8C3665PVI-080, CY8C3665PVI-060, and CY8C3665PVI-006. Treat them as conditional drop-in candidates until clock, temperature, qualification, and pin details are checked against the manufacturer documentation.
Is CY8C3665PVI-007 suitable for an industrial sensor controller?
The CY8C3665PVI-007 is suitable for many industrial sensor-controller designs because it combines a 67 MHz 8051 core, 32 KB flash, 4 KB SRAM, and a 12-bit ADC. Its 0.5 V to 5.5 V range also supports low-voltage acquisition systems. Industrial suitability still depends on the selected temperature grade, operating-voltage limits, peripheral requirements, and system-level EMC and environmental constraints.
Is CY8C3665PVI-007 the same as CY8C3665PVI-008?
The CY8C3665PVI-007 and CY8C3665PVI-008 are closely related PSoC 3 devices, but they are not interchangeable solely because both use the CY8C3665 family and PVI package designation. The target is identified as a 67 MHz part, while the manufacturer describes the -008 device as an 8051-based PSoC 3 with 32 KB flash and a 12-bit ADC. Review ordering tables and firmware timing requirements before substitution.
What is the best cross-brand equivalent for CY8C3665PVI-007?
No verified cross-brand equivalent is established for the CY8C3665PVI-007. PSoC 3 devices combine an 8051 core with proprietary programmable analog and digital resources, so a generic 8-bit microcontroller cannot be assumed to be pin-compatible. Use the Request a Quote form on this page for sourcing support, and require manufacturer pin, timing, peripheral, and memory compatibility before considering a cross-brand redesign.
Where can I buy CY8C3665PVI-007 online?
Use the Request a Quote form on this page to request CY8C3665PVI-007 availability, lead time, and ordering support. The form is the appropriate commercial channel for exact-MPN sourcing without inserting a static price into the technical content. Include your required quantity, packaging preference, target delivery date, and any required qualification documentation with the request.
What is the price of CY8C3665PVI-007?
Current pricing for CY8C3665PVI-007 is handled through the Request a Quote form on this page because distributor prices and stock can change with market conditions and order quantity. Submit the exact MPN and required quantity to obtain a current quotation. For design budgeting, the device should not be evaluated from family-level pricing because suffix-specific package and qualification requirements can affect availability.
What is the lead time for CY8C3665PVI-007?
Request the current CY8C3665PVI-007 lead time through the Request a Quote form on this page. The confirmed schedule should reflect the ordered quantity, package form, shipment destination, and current manufacturer or distribution availability. For production planning, ask for separate lead times for prototype and scheduled-volume quantities rather than assuming that an initial sample allocation guarantees a volume delivery date.
Is CY8C3665PVI-007 in stock?
Current CY8C3665PVI-007 inventory should be confirmed through the Request a Quote form on this page. A listing page alone does not establish a guaranteed stock allocation for the exact suffix and requested quantity. Provide the required quantity, reel or tray preference, and delivery location so the availability response can reflect the complete order configuration.
What tools and software support the CY8C3665PVI-007?
The CY8C3665PVI-007 is supported as an 8051-based PSoC 3 device in embedded-development workflows, including the Keil device catalog entry identified for the part. Development usually requires configuring the PSoC peripheral blocks, programming the selected flash partition, and matching the firmware to the device’s clock and package pins. Use the manufacturer’s device configuration and programming documentation for the definitive toolchain version.
What design checks are important for CY8C3665PVI-007?
Verify the 0.5 V to 5.5 V operating range, 67 MHz clock configuration, reset behavior, programming interface, and every 48-SSOP terminal against the manufacturer datasheet. Decoupling, clock stability, exposed routing requirements, and programming access should be considered together. Because the 67 MHz core is substantially faster than some lower-grade family members, timing-sensitive firmware and peripherals also require verification after any suffix substitution.

Technische Referenzdaten für CY8C3665PVI-007 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose CY8C3665PVI-007 when the design specifically needs the 67 MHz grade of the 8051-based CY8C3665 PSoC family, together with 32 KB flash, 4 KB SRAM, a 12-bit ADC, and a 48-SSOP footprint. CY8C3665PVI-008 is the closest documented alternative because the manufacturer confirms the same core and memory capacity, but its speed grade must be checked. Consider CY8C3665PVI-049, -080, -060, or -006 only after confirming their frequency, temperature, qualification, and terminal details against the original design. No verified cross-brand drop-in option is established because PSoC peripheral resources, programming tools, and analog functions are product-specific. For a new mixed-signal design, compare the integrated ADC and programmable resources with a conventional MCU plus discrete converter; for an existing PSoC design, same-family ordering variants offer the most practical path to a board-level qualification review.

Vergleich mit Alternativen

Parameter Dieses Produkt CY8C3665PVI-008 CY8C3665PVI-049 CY8C3665PVI-080 CY8C3665PVI-060 CY8C3665PVI-006
Brand Infineon Infineon Infineon Infineon Infineon Infineon
Package 48-SSOP 48-SSOP 48-SSOP 48-SSOP 48-SSOP 48-SSOP
MCU Core 8-bit 8051 8051 8051 8051 8051 8051

Wichtigste Unterscheidungsmerkmale

  • Highest identified clock grade in the listed PVI alternatives (vs. CY8C3665PVI-008)
  • Integrated analog conversion supports compact sensor designs (vs. CY8C3665PVI-049)
  • Deterministic interrupt organization for embedded control (vs. CY8C3665PVI-080)
  • Separate ECC-flash resources extend reliable local storage (vs. CY8C3665PVI-060)

Designhinweise

Use the manufacturer’s 48-SSOP land pattern and assign every terminal directly from the CY8C3665PVI-007 pin-description table. Place required decoupling capacitors next to the associated supply pins and keep programming, reset, and clock traces short. Check the footprint’s lead pitch, terminal length, and courtyard against the final package drawing before fabrication; the 48-SSOP package is not interchangeable with leaded SSOP packages.

Design the supply network for the device’s stated 0.5 V to 5.5 V operating range and keep startup, transient, and steady-state voltage within the limits for the selected ordering suffix. Separate sensitive analog-supply requirements from digital switching loads, verify the allowable ripple at the IC pins, and include local bulk capacitance where the supply path is shared by other components. Do not base the power design solely on the family-level voltage range.

Configure the 67 MHz operating mode only after checking clock-source requirements and peripheral timing in the manufacturer documentation. Route the clock away from analog inputs and high-speed switching nodes, use a continuous ground reference, and terminate unused configurable inputs according to the device guidance. When changing to a lower-frequency ordering variant, review interrupt latency, communication timing, PWM behavior, and acquisition timing in the firmware.

A shared package family is not sufficient proof that every CY8C3665 suffix is a production substitute. Before replacing CY8C3665PVI-007, compare the ordering tables for maximum frequency, temperature grade, qualification, flash configuration, and terminal functions. CY8C3665PVI-008 is documented as a 32 KB-flash, 12-bit-ADC PSoC 3 family member, while the target is identified as a 67 MHz device. Preserve the original clock, programming, and brownout settings when validating firmware compatibility.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The exact ordering code must be checked against current manufacturer compliance and qualification documentation.

Daten verifiziert am: 2026-11-19 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

CY8C3665PVI-007 CY8C3665PVI-007 datasheet CY8C3665PVI-007 datasheet pdf CY8C3665PVI-007 pinout CY8C3665PVI-007 equivalent CY8C3665PVI-007 replacement CY8C3665PVI-007 cross reference Infineon CY8C3665PVI-007 CY8C3665 67MHz 32KB Flash CY8C3665 48-SSOP pinout CY8C3665PVI-007 vs CY8C3665PVI-008 CY8C3665PVI-007 price CY8C3665PVI-007 stock CY8C3665PVI-007 sensor controller

Verwandte Bauteile & Begriffe

Infineon Cypress Semiconductor CY8C3665PVI-007 CY8C3665PVI-008 CY8C3665PVI-049 CY8C3665PVI-080 CY8C3665PVI-060 CY8C3665PVI-006 PSoC 3 programmable system-on-chip 8051 MCU 8-bit microcontroller embedded microcontroller semiconductor 48-SSOP SSOP package family surface-mount package program flash SRAM data EEPROM ECC flash 12-bit ADC Peripheral Hub Unit interrupt priority levels
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen