DCM3717S60D13K0TN1 - 1000W 40-60Vin 12.2Vout SM-ChiP DCM | Vicor
料号： DCM3717S60D13K0TN1 ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $285 | $285.00 |
| 10 | $268.5 | $2,685.00 |
| 100 | $245 | $24,500.00 |
| 500 | $225 | $112,500.00 |
| 1,000 | $205 | $205,000.00 |
DCM3717S60D13K0TN1 概述
The DCM3717S60D13K0TN1 delivers 96.5% peak efficiency using a proprietary ZVS buck-boost front end followed by Vicor's Sine Amplitude Converter post-regulation stage, giving the converter its characteristic soft-switching, low-EMI behavior at >1 MHz switching frequency. The SAC secondary eliminates the bulky output L-C filter required by conventional buck converters, which is what lets the module collapse 1 kW of conversion into a low-profile SM-ChiP surface-mount footprint roughly the size of a thumbnail.
Key specifications include: 40-60 VDC input range, 10.0-12.5 V trimmable output (factory-set to 12.2 V), 82 A continuous output current (1000 W), 90.2 A / 1100 W transient peak capability, 96.5% peak efficiency, >1 MHz switching frequency, and PMBus-compatible digital telemetry for monitoring voltage, current, temperature, and fault status. The SM-ChiP package is rated for -40C to +125C operation and supports board-mount reflow.
Typical applications include 48 V datacenter intermediate-bus conversion (e.g., stepping 48 V down to 12 V for downstream POL regulators or GPUs), industrial 48 V robotics and AGV traction rails, MIL-COTS tactical mobile power systems, and LED driver / high-power stage lighting. Parallel operation with active current sharing enables multi-kW systems from identical DCM modules.
The DCM3717 platform uses Vicor's proprietary high-density ChiP packaging, so thermal management is critical: the package requires a cold-plate or substantial PCB copper thermal via array to extract up to 36 W of full-load loss at 96.5% efficiency. Designers should follow Vicor SM-ChiP layout and cooling guidelines in the datasheet to achieve rated output.
This page synthesizes distributor pricing, parametric variants from the same DCM3717 family, paralleling notes, and practical thermal design guidance not bundled into the manufacturer datasheet.
直接替换替代料： DCM3717S60D13K0TN1 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： DCM3717S60D13K0TN1 （相同外形与封装尺寸） ——差异在于 Input Voltage Range, Mounting Type, Package, Continuous Output Current, Continuous Output Power.
快速对比工具——选择替代料号进行并排对比：
DCM3717S60E13G5TN1
✅ 直接替换✓ 有现货
$142.1 / 个
查看数据手册 →DCM3717S60D13K0TN1-T
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
DCM3717S60D13K0TN1 最大额定值与电气特性
| 拓扑 | ZVS Buck-Boost + Sine Amplitude Converter (SAC) |
| Module Type | Non-isolated, regulated DC-DC converter (PoL) |
| 输入电压范围 | 40 V to 60 VDC (semi-regulated) |
| 输出电压范围 | 10.0 V to 12.5 V (factory-trimmed to 12.2 V) |
| Continuous Output Power | 1000 W |
| Continuous Output Current | 82 A |
| Transient Peak Output | 1100 W / 90.2 A |
| Peak Efficiency | 96.5% |
| 开关频率 | >1 MHz |
| 封装 | SM-ChiP 3717 (board-mount) |
| 工作温度 | -40C to +125C |
| Digital Telemetry | PMBus-compatible |
| Parallel Operation | Supported (active current sharing) |
| 安装类型 | Surface Mount (SM-ChiP) |
| RoHS 状态 | Compliant |
DCM3717S60D13K0TN1 sm-chip 3717 (board-mount) 引脚配置指南
DCM3717S60D13K0TN1（sm-chip 3717 (board-mount) 封装）的引脚配置。 该功率器件具有栅极、漏极和源极端子。对于无极性封装，请参阅制造商数据手册以了解确切的引脚 1 方向和封装尺寸细节。常见应用包括电源设计、电机驱动和负载开关。
暂无详细引脚数据： DCM3717S60D13K0TN1.
请参阅 数据手册 以查看完整引脚配置。
典型应用
DCM3717S60D13K0TN1 适用于 6 应用s: 48 V Datacenter Intermediate-Bus Conversion, AI Compute Tray and GPU Power Delivery, Industrial 48 V Robotics and AGV Traction Rails, MIL-COTS Tactical Mobile Power Systems, LED Stage Lighting and High-Power Driver Rails, Network Switch and Router Power Subsystems.
48 V Datacenter Intermediate-Bus Conversion
The DCM3717S60D13K0TN1 steps 40-60 V semi-regulated bus voltage down to a regulated 12.2 V rail at 82 A continuous in hyperscale and AI-compute servers. Its 96.5% peak efficiency and >1 MHz ZVS switching minimize thermal load at 1000 W and let the module sit on a cold plate next to the load. The PMBus telemetry reports input/output voltage, current, and temperature for system-level power management. Compared with discrete 48-12 V buck stages, the SM-ChiP module collapses the magnetics into a footprint roughly the size of a thumbnail, freeing PCB real estate for compute silicon.
推荐
AI Compute Tray and GPU Power Delivery
High-end AI accelerators often require 12 V intermediate rails above 800 W per board; the DCM3717S60D13K0TN1 delivers 1000 W continuous and 1100 W transient peak from a 48 V bus with parallel operation supported. The Sine Amplitude Converter secondary eliminates the bulky output L-C filter, keeping the module's footprint compatible with dense GPU tray layouts. Designers can parallel two DCM3717 modules for 2000 W peak with active current sharing, all on a 48 V backbone that reduces distribution losses versus 12 V direct distribution.
推荐
Industrial 48 V Robotics and AGV Traction Rails
Factory automation robots and automated guided vehicles (AGVs) are migrating to 48 V bus architectures for lighter cabling; the DCM3717S60D13K0TN1 supplies 12 V at 82 A to motor drivers and onboard controllers from a 48 V battery or bus. The module's -40C to +125C operating range and SM-ChiP board-mount package suit sealed industrial enclosures when paired with a cold plate. Vicor's PMBus telemetry lets the AGV's battery management system monitor each module's input current and temperature in real time.
推荐
MIL-COTS Tactical Mobile Power Systems
Tactical mobile platforms, unmanned vehicles, and military communications racks often rely on 48 V lithium battery banks that need a regulated 12 V rail for radios, sensors, and computing. The DCM3717S60D13K0TN1's 40-60 V input range tolerates battery droop and load-dump transients within that band, while its SM-ChiP package survives the shock and vibration profile of mobile platforms when properly cold-plated. High efficiency at partial load (typical 95%+ down to 30% load) preserves battery runtime during mission idle.
推荐
LED Stage Lighting and High-Power Driver Rails
Professional stage lighting systems increasingly use 48 V distribution to power long LED strings, but the drivers themselves often want a tightly regulated 12 V. The DCM3717S60D13K0TN1 provides 12.2 V at 82 A continuous with high efficiency and low EMI - critical in lighting racks where conducted noise can couple into DMX / sACN control lines. Its >1 MHz switching pushes EMI harmonics above AM-band interference, simplifying the EMC compliance path.
推荐
Network Switch and Router Power Subsystems
High-port-count network switches with PoE++ output stages need robust 12 V intermediate rails at 600-1000 W. The DCM3717S60D13K0TN1 converts 48 V (from a rectifier or battery plant) to 12 V at 82 A continuous with PMBus telemetry that integrates with the switch's baseboard management controller. Its active current-sharing capability allows two modules to be paralleled for redundant operation in carrier-grade or data-center switching applications.
推荐
工程参考数据： DCM3717S60D13K0TN1 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | DCM3717S60E13G5TN1 | DCM3717S60D13K0TN1-T |
|---|---|---|---|
| Brand | Vicor | Vicor | Vicor |
| Package | SM-ChiP 3717 | SM-ChiP 3717 (same) | SM-ChiP 3717 (same) |
| Input Voltage Range | 40 V to 60 V | 40 V to 60 V (same) | 40 V to 60 V (same) |
| Output Voltage (factory trim) | 12.2 V | 12.2 V | 12.2 V |
| Continuous Output Power | 1000 W | 750 W (-25%) | 1000 W (same) |
| Continuous Output Current | 82 A | 61.5 A (-25%) | 82 A (same) |
| Switching Frequency | >1 MHz | >1 MHz (same) | >1 MHz (same) |
关键差异点
- Highest continuous power in the DCM3717 12 V family （对比 DCM3717S60E13G5TN1)
- PMBus-compatible telemetry built in （对比 Discrete 48-12 V buck converters)
- Sine Amplitude Converter eliminates output L-C filter （对比 Conventional hard-switched buck modules)
设计说明
Estimated: at 1000 W output and 96.5% peak efficiency, the DCM3717S60D13K0TN1 dissipates roughly 36 W of full-load loss into its SM-ChiP 3717 surface-mount package. Vicor's datasheet layout guide requires a cold plate, heat sink, or thermal via array beneath the package to keep the junction inside the -40C to +125C operating envelope at full load. For airflow-cooled designs, derate output power by approximately 15-20% unless a 1+ C/W cold plate is attached.
The SM-ChiP 3717 package is a board-mount surface-mount module; follow Vicor's SM-ChiP land pattern and via-array footprint exactly. Input, output, and ground copper pours must be sized to handle 82 A continuous without excessive voltage drop - typical designs use 2 oz copper outer layers with multiple parallel vias to inner power planes. Skip-trace the PMBus lines to avoid coupling switching noise into telemetry.
Do not assume generic Vicor DCM thermal resistance values apply to the SM-ChiP 3717 surface-mount package - they are substantially different from the through-hole ChiP variants. Always reference the datasheet's specific SM-ChiP thermal curves. Also, paralleling modules requires the active current-share pin to be wired, not just output-connected; failing to do so can lead to unequal current sharing and thermal runaway in one module.
Place input bulk capacitance as close to the module's input pins as physically possible; the 40-60 V bus typically needs 2x 4.7 uF X7R 100 V ceramics plus a 100 uF aluminum polymer for ripple absorption. On the output side, follow the SAC post-regulation filter recommendations in the datasheet - the SAC secondary handles high-frequency noise but a small 10 uF X7R near the output improves load-step response.
合规信息
RoHS compliant per Vicor product page. AEC-Q100 is not applicable to this industrial/commercial module; not automotive qualified per the manufacturer datasheet.
