Analog Devices

DG445CY+ - 4-Channel SPST Analog Switch, 85 Ohm | Analog Devices

料号: DG445CY+ ✓ 量产中
85 ohm Rds(on) 16-SOIC Package
最小起订量: 1 |

DG445CY+ 概述

Analog Devices DG445CY+ is a 4-circuit, 1:1 analog switch with an 85 ohm on-resistance in a 16-pin SOIC package. The device is identified as an improved quad SPST analog switch by Maxim Integrated, a company now represented under Analog Devices. It is intended for routing analog signals through four independently controlled switch paths.

An analog switch is a semiconductor device that connects or disconnects a signal path under digital control. The DG445CY+ combines four SPST switch functions in one package, reducing the number of discrete components required for sample-and-hold, signal-routing, measurement, and test systems. Its 1:1 organization means each switch provides a single conducting path when enabled, while the normally open configuration provides a defined off state between the signal terminals.

The key verified operating characteristics of the DG445CY+ are its four switch circuits, 1:1 configuration, 85 ohm on-resistance, and 16-SOIC package. These specifications make the device suitable for analog signal isolation, controlled routing between a source and destination, and multiplexing arrangements where the system uses separate control signals. The SOIC package is compatible with conventional surface-mount PCB assembly and is available in a standard industrial component format.

The DG445CY+ should be considered when the design requires multiple analog switching functions in one package and the signal path is not intended to carry high current. Designers should check the complete manufacturer datasheet for supply voltage, control logic levels, leakage current, switching time, channel capacitance, and the complete pin mapping before finalizing a PCB layout or selecting a replacement.

Use the 16-pin SOIC footprint and pin assignments specified by the manufacturer datasheet when placing the device. Keep analog traces short, maintain controlled return paths, and place any required input and output protection close to the switched nodes. For applications requiring a replacement, verify that the substitute has the same SOIC footprint, compatible control polarity, acceptable on-resistance, and equivalent voltage and timing limits rather than relying on package appearance alone.

直接替换替代料: DG445CY+ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: DG445CY+ (相同外形与封装尺寸) ——差异在于 Switch Configuration, Package, Number of Channels, On-Resistance, Technology.

Analog Devices
Switch Configuration: 4 x SPST (Normally Open, active-LOW control)
Number of Channels: 4
对比 DG445CY+ →
Analog Devices
Number of Channels: 8 channels
On-Resistance: 100 ohm maximum
Technology: Monolithic CMOS
对比 DG445CY+ →
Analog Devices
Switch Configuration: SPST normally open
Package: 8-pin PDIP
Number of Channels: 1 channel
对比 DG445CY+ →
Analog Devices
Switch Configuration: 2:1 SPDT
Package: 8-SOIC
对比 DG445CY+ →
Analog Devices
Switch Configuration: 4 independent SPST switches
Package: 16-pin PDIP
Number of Channels: 4 channels
对比 DG445CY+ →

DG445CY

✅ 直接替换
📦 16-SOIC
Uses the same 4-circuit 1:1 SPST configuration and 85 ohm on-resistance; ordering suffix and temperature-grade details must be confirmed.

📋 参考替代料(不在目录中)

DG444DJ+

✅ 直接替换 ⚠️ 规格未核验
Analog Devices
📦 16-SOIC
4 channels · 4 independent SPST switches · 85 ohm maximum · 4 ohm maximum between switches · 9 ohm maximum over the signal range · 10 V to 30 V · ±4.5 V to ±20 V · TTL and CMOS compatible

联系询价

查看数据手册 →

DG419DY+

✅ 直接替换 ⚠️ 规格未核验
Analog Devices
📦 16-SOIC
1 circuit · 2:1 SPDT · 35 ohm · 3 ohm maximum · 4 ohm maximum · 10 V to 30 V · 4.5 V to 20 V · 44 V

联系询价

查看数据手册 →

DG418DJ+

✅ 直接替换 ⚠️ 规格未核验
Analog Devices
📦 16-SOIC
Precision CMOS analog switch · SPST normally open · 1 channel · 35 ohm maximum · 15 V maximum · 44 V · 100 ns · 35 nW

联系询价

查看数据手册 →

DG408DY+

✅ 直接替换 ⚠️ 规格未核验
Analog Devices
📦 16-SOIC
8:1 · 8 channels · 100 ohm maximum · 8 ohm maximum · 9 ohm maximum · Single 8-channel · Monolithic CMOS · TTL/CMOS-compatible

联系询价

查看数据手册 →

DG445CY+ 最大额定值与电气特性

Number of Switch Circuits 4 circuits
Switch Configuration 1:1 SPST, normally open
On-Resistance 85 ohm
封装 16-SOIC
Manufacturer Maxim Integrated, represented by Analog Devices
Device Type Improved quad SPST analog switch
Signal Path Count per Circuit 1:1
Technology CMOS analog switch
安装类型 Surface mount

DG445CY+ 16-soic 引脚配置指南

DG445CY+(16-soic 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

DG445CY+ 的 16-soic 封装引脚图

暂无详细引脚数据: DG445CY+.

请参阅 数据手册 以查看完整引脚配置。

典型应用

DG445CY+ 适用于 6 应用s: Analog Signal Routing, Sample-and-Hold Systems, Test and Measurement Equipment, Battery-Powered Instrumentation, Data Acquisition Front Ends, Multiplexer and Muxing Networks.

🔧

Analog Signal Routing

The DG445CY+ is suitable for controlled routing of analog signals through four independent 1:1 SPST paths. Its verified 85 ohm on-resistance can be acceptable in measurement, buffering, and instrumentation systems where the source and load impedities are not extremely low. Use each switch as a normally open connection between a signal node and a destination, with a separate control input for the intended path. Before finalizing the design, confirm the control levels, supply voltage, leakage, and switching time in the manufacturer datasheet. The 16-SOIC package also helps reduce board area compared with four separate switch packages.

📊

Sample-and-Hold Systems

The DG445CY+ can provide switching functions in sample-and-hold architectures where multiple analog nodes must be connected or isolated under digital control. The four SPST circuits allow a compact implementation when the system needs separate acquisition and routing paths. Because the published records identify 85 ohm on-resistance but do not state leakage, capacitance, or switching time, those values must be checked against the acquisition bandwidth and settling-time requirements. Use the manufacturer truth table to define the control sequence and place switched analog traces away from fast digital control lines.

🖥️

Test and Measurement Equipment

The DG445CY+ is appropriate for test and measurement equipment that requires repeatable analog path isolation between a source, instrument, or load. Its four integrated SPST switches can simplify channel organization while keeping the footprint in a standard 16-SOIC package. The 85 ohm on-resistance should be included in the total source resistance when calculating measurement accuracy and attenuation. Confirm the device's off leakage and switching characteristics in the datasheet before using it for high-impedance nodes, and keep control routing short and isolated from sensitive analog paths to reduce crosstalk.

🔋

Battery-Powered Instrumentation

The DG445CY+ can support signal isolation in battery-powered instrumentation where the design needs several analog paths without using a separate IC for every switch. The four-channel integration helps reduce component count and PCB area, while the 85 ohm on-resistance is suitable only when the source and load impedities permit the resulting signal degradation. Because power consumption and supply-voltage details are not present in the basic records, verify quiescent current, control current, and operating range in the datasheet. Use a low-leakage design and controlled grounding strategy when handling high-impedance sensors.

🌐

Data Acquisition Front Ends

The DG445CY+ can be used in data-acquisition front ends to route signals into or out of an analog measurement channel. Four SPST switch circuits provide a compact way to implement channel selection or signal isolation, provided the 85 ohm on-resistance does not materially affect accuracy. Confirm channel capacitance and switching time against the acquisition bandwidth, and place the switch close to the driven node to minimize parasitic capacitance and unwanted coupling. The manufacturer pinout and recommended application circuit should be used as the basis for layout and control sequencing.

⚡

Multiplexer and Muxing Networks

The DG445CY+ is useful in small multiplexer or routing networks where multiple analog sources must be isolated and connected to a common destination. The four 1:1 SPST circuits can be coordinated by digital control logic, allowing only the intended path to conduct when configured as normally open. The 85 ohm on-resistance contributes to the source impedance seen by the receiving circuit, so it must be included in gain and settling calculations. Verify switch timing and control polarity in the datasheet, and use separate ground returns to minimize injection from control signals.

What is the DG445CY+?
The Analog Devices DG445CY+ is a 4-circuit, 1:1 SPST analog switch with an 85 ohm on-resistance in a 16-SOIC package. Maxim Integrated originally described it as an improved quad SPST analog switch. It is used to connect or isolate analog signal paths under digital control.
What are the key specifications of DG445CY+?
The DG445CY+ provides four switch circuits in a 1:1 SPST arrangement, with an 85 ohm on-resistance, and is housed in a 16-pin SOIC package. The verified product information also identifies the device as a CMOS analog switch. Supply voltage, timing, leakage, and temperature limits should be confirmed in the manufacturer datasheet.
Where can I download the DG445CY+ datasheet PDF?
The DG445CY+ datasheet PDF is available through the Maxim Integrated product documents listed on the datasheet directory at alldatasheet.com. The listed document is eight pages and is associated with the original DG445CY part number. Use the manufacturer document for final pin, voltage, timing, and application information.
Where can I find the DG445CY+ pinout?
The DG445CY+ uses a 16-pin SOIC package, and its authoritative pin assignments are shown in the manufacturer datasheet pinout and truth-table sections. A complete verified pin list is not present in the product records used for this page, so consult the datasheet before routing control inputs, supply pins, and analog terminals.
How many analog switches are integrated in DG445CY+?
The DG445CY+ integrates four independent analog switch circuits in one 16-pin SOIC device. Each circuit is identified as a 1:1 SPST, normally open switch, allowing an analog signal to be connected or disconnected by its associated control input.
What is the on-resistance of DG445CY+?
The DG445CY+ has a verified on-resistance of 85 ohm. This value is important when the switched signal contains a source impedance or when insertion loss must be kept low. The actual signal attenuation also depends on the load, frequency, switch capacitance, and PCB routing.
Can DG445CY+ replace DG444DJ+?
The DG444DJ+ is a same-brand Maxim Integrated analog-switch family member listed in the XAIPART part catalog, but a guaranteed drop-in substitution requires matching the complete pinout, control polarity, supply range, and timing specifications. Confirm those details against the manufacturer datasheets before approving the replacement.
What is the best drop-in replacement for DG445CY+?
No single verified cross-brand drop-in replacement was established in the available records. Same-brand Maxim family options include DG444DJ+, DG419DY+, DG418DJ+, and DG408DY+, but each may differ in switch count, configuration, or electrical limits. Verify the datasheet pinout and specifications before using any of them as a replacement.
Is DG445CY+ suitable for sample-and-hold circuits?
The DG445CY+ can serve as a signal-routing element in sample-and-hold and measurement systems because it provides four SPST paths in one 16-SOIC package. Its suitability depends on the required switching time, off leakage, capacitance, and injected error. These parameters are not stated in the basic product listing and must be checked in the datasheet.
What is the difference between DG445CY+ and DG444DJ+?
The DG445CY+ is identified as a 4-circuit, 1:1 SPST analog switch with 85 ohm on-resistance, while DG444DJ+ is a distinct Maxim Integrated family member whose exact configuration and electrical ratings must be taken from its own datasheet. A replacement decision should compare switch count, pin function, control logic, voltage rating, and timing.
When should I choose DG445CY+ over a discrete analog switch?
Choose the DG445CY+ when a design needs four integrated SPST switching functions in a single 16-SOIC footprint and the verified 85 ohm on-resistance is acceptable. Discrete switches may provide lower resistance or faster switching in some designs, but they require more board area and individual control routing.
Where can I buy DG445CY+ and what is the lead time?
Use the Request a Quote form on this page to request current DG445CY+ availability, pricing, and lead time from XAIPART. Current commercial terms can change with inventory and order quantity, so request a written quotation for the exact MPN and required packaging configuration.
Is DG445CY+ in stock?
Inventory status for the exact DG445CY+ should be confirmed through the Request a Quote form on this page. The available product records show distributor listings, but they do not establish a current XAIPART stock quantity for the exact orderable MPN.
What is the price of DG445CY+?
Current DG445CY+ pricing is available through the Request a Quote form on this page. The verified records identify the product and its 16-SOIC configuration, but they do not provide an explicit quantity-break price table for the exact MPN, so no static price figure is published here.
What can replace DG445CY+?
Potential replacements must use the same 16-pin SOIC footprint and provide compatible control polarity, supply voltage, on-resistance, leakage, and switching timing. Same-brand candidates in the XAIPART catalog include DG444DJ+, DG419DY+, DG418DJ+, and DG408DY+, while the DG445CY without the plus suffix is the closest identified orderable variant.
Is DG445CY+ compliant with RoHS and REACH?
RoHS and REACH status for DG445CY+ are not stated in the available product records and therefore remain unconfirmed. Review the current manufacturer material declaration, product page, or applicable compliance documentation before treating the device as compliant for a regulated design.

工程参考数据: DG445CY+ ——对比、设计指导和合规信息。

选型指南

Choose the DG445CY+ when the design requires four 1:1 SPST, normally open analog switches in a 16-SOIC package and 85 ohm on-resistance is acceptable for the source and load impedance. It is particularly useful for signal routing, measurement, sample-and-hold, and small multiplexing systems. Consider DG445CY when the exact suffix or orderable configuration is the only difference relevant to the design, but confirm its full datasheet ratings. DG444DJ+, DG419DY+, DG418DJ+, and DG408DY+ can be evaluated as same-brand Maxim family alternatives when their switch topology, pin functions, control polarity, voltage range, leakage, capacitance, and timing match the system requirements. Because the available records do not establish a fully verified cross-brand drop-in equivalent, validate any substitute against the manufacturer datasheets before PCB release.

与替代料对比

参数 本产品 DG445CY DG444DJ+ DG419DY+ DG418DJ+ DG408DY+
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices

关键差异点

  • Four independently packaged switch functions in one IC (对比 DG445CY)
  • Verified on-resistance value (对比 DG444DJ+)
  • Directly identified 16-SOIC footprint (对比 DG419DY+)

设计说明

Place the DG445CY+ close to the analog nodes it switches and route the four switched paths as short, continuous traces. Keep control inputs away from sensitive analog pins, and use a solid ground reference beneath the device. The manufacturer datasheet pinout should be used for the final 16-SOIC footprint and routing plan.

Include the verified 85 ohm on-resistance in the source impedance of every affected signal path. For high-impedance nodes, leakage and capacitance can dominate, so confirm those parameters in the manufacturer datasheet. Add protection or buffering only after checking that the added capacitance does not degrade settling time.

Do not substitute a similarly packaged analog switch solely by footprint. Verify the number of switch circuits, SPST topology, normally open or closed behavior, control polarity, supply range, on-resistance, and timing. The listed alternatives share the 16-SOIC package family, but exact pin compatibility and electrical equivalence still require datasheet confirmation.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The available product records do not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Check current manufacturer compliance documentation before regulated use.

数据核验日期: 2026-11-10 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

DG445CY+ datasheet DG445CY+ pinout DG445CY+ datasheet pdf Analog Devices DG445CY+ DG445CY+ 16-SOIC DG445CY+ 85 ohm DG445CY+ SPST analog switch DG445CY+ equivalent DG445CY+ replacement DG445CY+ vs DG444DJ+ DG445CY+ price DG445CY+ stock DG445CY+ application circuit DG445CY+ analog routing what is DG445CY+

相关元器件 & 术语

Analog Devices Maxim Integrated DG445CY+ DG445CY DG444DJ+ DG419DY+ DG418DJ+ DG408DY+ analog switch SPST switch normally open switch 1:1 switch CMOS on-resistance 85 ohm signal routing sample-and-hold multiplexer data acquisition test and measurement 16-SOIC SOIC package family surface-mount device switching time off leakage
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情