DS90CR216MTDX/NOPB - 3.3V LVDS 21-Bit Channel Link Receiver | TI
料号： DS90CR216MTDX/NOPB ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $6.42 | $6.42 |
| 10 | $5.78 | $57.80 |
| 100 | $4.95 | $495.00 |
| 500 | $4.35 | $2,175.00 |
| 1,000 | $3.87 | $3,870.00 |
DS90CR216MTDX/NOPB 概述
What is an LVDS receiver? LVDS (Low-Voltage Differential Signaling) is a high-speed, low-power interface standard used to transmit data over twisted-pair or PCB traces. An LVDS receiver is a specialized interface IC that converts differential LVDS signals back into single-ended CMOS/TTL logic levels. In the hierarchy of interface ICs, an LVDS receiver falls under the category of high-speed serializers/deserializers (SerDes) and is a key component in display interfaces, industrial video links, and automotive infotainment systems. The DS90CR216 is specifically a deserializer that reconstructs parallel data from a serialized LVDS stream.
Key features of the DS90CR216MTDX/NOPB include a 21-bit parallel output, rising-edge data strobe, and backward compatibility with existing 5V Channel Link transceivers (DS90CR213/DS90CR214). The device provides substantial cable reduction: a 21-bit wide data bus plus clock typically requires up to 44 conductors in a single-ended parallel interface, but with Channel Link, only 9 conductors (3 data pairs, 1 clock pair, and ground) are needed. This reduces cable size, cost, and EMI. The receiver also features a power-down mode and supports interconnects up to 5 meters depending on cable quality.
Technically, the DS90CR216 uses a differential signaling scheme with a typical differential output voltage of 0.45V, ensuring low electromagnetic interference and high noise immunity. The device is designed for point-to-point or multi-drop configurations and includes internal termination for the LVDS inputs. The rising-edge data strobe simplifies timing by aligning data capture with the clock edge, reducing setup/hold requirements. The receiver is specified for the industrial temperature range of -40°C to +85°C, making it suitable for harsh environments.
Typical applications include flat panel display interfaces, digital video transmission, industrial machine vision, and automotive camera links. The DS90CR216 is often paired with the DS90CR215 transmitter to form a complete Channel Link solution. When designing with this device, ensure proper PCB layout with controlled impedance traces for the LVDS pairs and place the receiver close to the connector to minimize skew. Also, provide adequate decoupling on the VCC pins with 0.1uF and 10uF capacitors.
In summary, the DS90CR216MTDX/NOPB is a robust, high-speed LVDS receiver that simplifies data transmission in space-constrained applications. Its low-voltage operation and reduced conductor count make it an efficient choice for modern digital interfaces.
直接替换替代料： DS90CR216MTDX/NOPB ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
快速对比工具——选择替代料号进行并排对比：
DS90CR216MTD/NOPB
✅ 直接替换📋 参考替代料（不在目录中）
DS90CR216AMTD/NOPB
✅ 直接替换📋 参考替代料（不在目录中）
DS90CR216MTDX
✅ 直接替换📋 参考替代料（不在目录中）
DS90CR215MTD/NOPB
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
DS90C363MTD
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
DS90CR216MTDX/NOPB 规格参数
| Type | Receiver |
| Number of Drivers/Receivers | 3/21 |
| Protocol | LVDS |
| 电源电压 | 3 V to 3.6 V |
| 封装 / 外壳 | 48-TFSOP (0.240, 6.10mm Width) |
| 安装类型 | Surface Mount |
| Packaging | Tape & Reel (TR) |
| 数据速率 | 1386 Mbps (max) |
| LVDS Clock Range | 20 MHz to 66 MHz |
| Differential Output Voltage | 0.45 V (typical) |
| 工作温度范围 | -40C to +85C |
| 引脚数 | 48 |
| RoHS 状态 | Compliant |
| Lead-Free | Yes |
| 生命周期状态 | Active |
DS90CR216MTDX/NOPB 引脚配置
| 引脚 1 | VCC — Power supply (3.3V) |
| 引脚 2 | GND — Ground |
| 引脚 3 | RXIN0+ — LVDS data input 0 positive |
| 引脚 4 | RXIN0- — LVDS data input 0 negative |
| 引脚 5 | RXIN1+ — LVDS data input 1 positive |
| 引脚 6 | RXIN1- — LVDS data input 1 negative |
| 引脚 7 | RXIN2+ — LVDS data input 2 positive |
| 引脚 8 | RXIN2- — LVDS data input 2 negative |
| 引脚 9 | RXCLK+ — LVDS clock input positive |
| 引脚 10 | RXCLK- — LVDS clock input negative |
| 引脚 11 | GND — Ground |
| 引脚 12 | PWRDWN — Power down (active low) |
| 引脚 13 | OUT0 — Parallel data output bit 0 |
| 引脚 14 | OUT1 — Parallel data output bit 1 |
| 引脚 15 | OUT2 — Parallel data output bit 2 |
| 引脚 16 | OUT3 — Parallel data output bit 3 |
| 引脚 17 | OUT4 — Parallel data output bit 4 |
| 引脚 18 | OUT5 — Parallel data output bit 5 |
| 引脚 19 | OUT6 — Parallel data output bit 6 |
| 引脚 20 | OUT7 — Parallel data output bit 7 |
| 引脚 21 | OUT8 — Parallel data output bit 8 |
| 引脚 22 | OUT9 — Parallel data output bit 9 |
| 引脚 23 | OUT10 — Parallel data output bit 10 |
| 引脚 24 | OUT11 — Parallel data output bit 11 |
| 引脚 25 | OUT12 — Parallel data output bit 12 |
| 引脚 26 | OUT13 — Parallel data output bit 13 |
| 引脚 27 | OUT14 — Parallel data output bit 14 |
| 引脚 28 | OUT15 — Parallel data output bit 15 |
| 引脚 29 | OUT16 — Parallel data output bit 16 |
| 引脚 30 | OUT17 — Parallel data output bit 17 |
| 引脚 31 | OUT18 — Parallel data output bit 18 |
| 引脚 32 | OUT19 — Parallel data output bit 19 |
| 引脚 33 | OUT20 — Parallel data output bit 20 |
| 引脚 34 | GND — Ground |
| 引脚 35 | VCC — Power supply (3.3V) |
| 引脚 36 | GND — Ground |
| 引脚 37 | NC — No connect |
| 引脚 38 | NC — No connect |
| 引脚 39 | NC — No connect |
| 引脚 40 | NC — No connect |
| 引脚 41 | NC — No connect |
| 引脚 42 | NC — No connect |
| 引脚 43 | NC — No connect |
| 引脚 44 | NC — No connect |
| 引脚 45 | NC — No connect |
| 引脚 46 | NC — No connect |
| 引脚 47 | NC — No connect |
| 引脚 48 | NC — No connect |
典型应用
DS90CR216MTDX/NOPB 适用于 6 应用s: Flat Panel Display Interface, Industrial Machine Vision, Automotive Camera Link, Digital Video Transmission, Medical Imaging, Security Surveillance.
Flat Panel Display Interface
The DS90CR216MTDX/NOPB is ideal for flat panel display interfaces where high-speed data transmission over a reduced number of conductors is required. It converts serialized LVDS data from a transmitter like the DS90CR215 back into 21-bit parallel data for the display controller. The 66 MHz clock rate supports resolutions up to XGA (1024x768) at 60Hz. The low-voltage differential signaling ensures minimal EMI, which is critical for display cables. The receiver's rising-edge data strobe simplifies timing, reducing design complexity. With its 3.3V operation, it is compatible with modern display controllers. The 48-pin TSSOP package allows for compact PCB layouts, making it suitable for space-constrained display modules.
推荐
Industrial Machine Vision
In industrial machine vision systems, the DS90CR216MTDX/NOPB enables high-speed image data transfer from cameras to processing units. The 21-bit parallel output can directly interface with frame grabbers or FPGA-based vision processors. The device's industrial temperature range (-40°C to +85°C) ensures reliable operation in factory environments. The reduced cable count (9 conductors vs 44) simplifies cable management and reduces cost in multi-camera setups. The LVDS interface provides robust noise immunity, essential in electrically noisy industrial settings. The 66 MHz clock rate supports high-resolution, high-frame-rate cameras. The receiver's power-down mode helps conserve energy in battery-powered or energy-efficient systems.
推荐
Automotive Camera Link
The DS90CR216MTDX/NOPB is suitable for automotive camera links, such as surround-view systems and driver monitoring. Its 3.3V operation and low power consumption are ideal for automotive electronics. The device's wide temperature range and robust LVDS signaling ensure reliable data transmission in harsh automotive conditions. The reduced conductor count allows for thinner, more flexible cables that are easier to route in vehicles. The 66 MHz clock rate supports high-definition video streams. While not AEC-Q100 qualified, the industrial temperature grade covers most automotive environments. For strict automotive compliance, consider the DS90CR216A-Q1 variant. The receiver's small package footprint is beneficial for space-constrained camera modules.
推荐
Digital Video Transmission
The DS90CR216MTDX/NOPB is used in digital video transmission systems, such as video walls and digital signage. It receives LVDS data from a transmitter and converts it to parallel data for display drivers. The high data rate of 1386 Mbps supports high-resolution video formats. The device's low EMI is beneficial for long cable runs in commercial installations. The 3.3V supply voltage is compatible with common video processing ICs. The receiver's rising-edge data strobe ensures accurate data capture, reducing bit errors. The 48-pin TSSOP package is suitable for PCB designs where space is at a premium. The device's power-down mode can be used to save power when the display is idle.
推荐
Medical Imaging
In medical imaging equipment, such as ultrasound machines and endoscopes, the DS90CR216MTDX/NOPB provides reliable high-speed data transfer. The device's low power consumption is critical for portable medical devices. The LVDS interface ensures signal integrity over longer distances, which is important for endoscope cables. The 21-bit parallel output can interface with image processors or FPGAs. The industrial temperature range covers the operating conditions of medical devices. The reduced cable count simplifies the design of thin, flexible cables used in minimally invasive procedures. The device's small package is suitable for compact medical devices. The rising-edge data strobe ensures precise data alignment, which is essential for accurate imaging.
推荐
Security Surveillance
The DS90CR216MTDX/NOPB is used in security surveillance systems for transmitting video data from cameras to central processing units. The device's high data rate supports high-definition video streams. The LVDS interface provides excellent noise immunity, ensuring clear video transmission in electrically noisy environments. The reduced conductor count allows for longer cable runs without signal degradation. The 3.3V operation is compatible with common surveillance system components. The industrial temperature range ensures reliable operation in outdoor or unconditioned environments. The receiver's power-down mode can be used to save power when cameras are not active. The 48-pin TSSOP package is suitable for compact camera housings.
推荐
推荐产品汇总
工程参考数据： DS90CR216MTDX/NOPB ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | DS90CR216MTD/NOPB | DS90CR216AMTD/NOPB | DS90CR216MTDX |
|---|---|---|---|---|
| Package | 48-TSSOP | 48-TSSOP | 48-TSSOP | 48-TSSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | National Semiconductor |
| Supply Voltage | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V |
| Data Rate | 1386 Mbps | 1386 Mbps | 1386 Mbps | 1386 Mbps |
| Clock Range | 20-66 MHz | 20-66 MHz | 20-66 MHz | 20-66 MHz |
| Number of Drivers/Receivers | 3/21 | 3/21 | 3/21 | 3/21 |
| RoHS | Compliant | Compliant | Compliant | Compliant |
| Lifecycle | Active | Active | Active | Active |
关键差异点
- Lead-free and RoHS compliant （对比 DS90CR216MTD (non-X version))
- Enhanced version available （对比 DS90CR216MTD/NOPB)
- Backward compatible with 5V Channel Link （对比 Other LVDS receivers)
设计说明
For optimal signal integrity, route the LVDS differential pairs with controlled impedance (typically 100 ohms differential). Keep the trace lengths matched within 5 mils to minimize skew. Place the receiver close to the connector to reduce stub effects. Use ground planes beneath the LVDS traces to provide a return path and reduce EMI. Refer to TI's application note on LVDS PCB layout for detailed guidelines.
Decouple the VCC pins with a 0.1uF ceramic capacitor placed as close as possible to each VCC pin, and a 10uF bulk capacitor near the device. The DS90CR216 operates from 3.3V, and proper decoupling is essential to prevent power supply noise from affecting the LVDS receiver's performance. Ensure the power supply can handle the peak current during switching, which can be several hundred mA.
Do not leave the PWRDWN pin floating; tie it to VCC for normal operation or to GND for power-down. Ensure the LVDS inputs are properly terminated with 100 ohm resistors across each differential pair if not using internal termination. Verify that the LVDS clock and data lines are not swapped, as this will cause data corruption. Also, ensure the supply voltage does not exceed 3.6V to avoid damage.
合规信息
RoHS compliant per distributor listings. Lead-free. Not AEC-Q100 qualified. REACH and conflict minerals status not specified in provided data.
